Effect of calcium phosphate bone cement augmentation on volar plate fixation of unstable distal radial fractures in the elderly

Current Management and Volar Locking Plate Fixation with Bone Cement Augmentation for Elderly Distal Radius Fractures-An Updated Narrative Review

Distal radius fractures (DRFs) are the most common among all kinds of fractures with an increase in incidence due to the rapidly expanded size of the elderly population in the past decades. Both non-surgical and surgical treatments can be applied for this common injury. Nowadays, more and more elderly patients with DRFs undergo surgical treatments to restore pre-injury activity levels faster. However, optimal treatment for geriatric DRFs is still debated, and careful evaluation and selection of patients are warranted considering clinical and functional outcomes, and complications following surgical treatments. Furthermore, osteoporosis is a predominant factor in elderly DRFs mostly deriving from a low-energy trauma, so many treatment modalities are developed to enhance better bone healing. Among various options for bone augmentation, bone cement is one of the most widely used measures. Bone cement such as calcium phosphate theoretically improves fracture stability and healing, but whether the elderly patients with DRFs can significantly benefit from surgical fixation with bone cement augmentation (BCA) remains controversial. Hence, in the present review, the latest literature regarding current concepts of management and evidence about volar locking plate fixation (VLPF) with BCA for elderly DRFs was searched in MEDLINE, Embase, Cochrane Central Register of Controlled Trials, and Web of Science; out of >1000 articles, full texts of 48 and 6 articles were then examined and analyzed separately for management and VLPF with BCA for elderly DRFs. We aim to provide the readers with updates concerning the above issues.

A Review of the Application of Natural and Synthetic Scaffolds in Bone Regeneration

The management of bone defects is complicated by the presence of clinical conditions, such as critical-sized defects created by high-energy trauma, tumour resection, infection, and skeletal abnormalities, whereby the bone regeneration capacity is compromised. A bone scaffold is a three-dimensional structure matrix serving as a template to be implanted into the defects to promote vascularisation, growth factor recruitment, osteogenesis, osteoconduction, and mechanical support. This review aims to summarise the types and applications of natural and synthetic scaffolds currently adopted in bone tissue engineering. The merits and caveats of natural and synthetic scaffolds will be discussed. A naturally derived bone scaffold offers a microenvironment closer to in vivo conditions after decellularisation and demineralisation, exhibiting excellent bioactivity, biocompatibility, and osteogenic properties. Meanwhile, an artificially produced bone scaffold allows for scalability and consistency with minimal risk of disease transmission. The combination of different materials to form scaffolds, along with bone cell seeding, biochemical cue incorporation, and bioactive molecule functionalisation, can provide additional or improved scaffold properties, allowing for a faster bone repair rate in bone injuries. This is the direction for future research in the field of bone growth and repair.

Retrospective Comparative Study of Clinical Outcomes and Cost-Effectiveness with Bone Substitutes on Volar Locking Plate Fixation of Unstable Distal Radial Fractures in the Elderly

Background: This multicenter retrospective study aimed to compare clinical outcomes and cost-effectiveness with bone substitutes on volar locking plate (VLP) fixation of unstable distal radial fractures (DRF) in the elderly. Methods: The data of 1,980 patients of ≥65 years of age who underwent surgery for the DRF with a VLP in 2015-2019 were extracted from a database (named TRON). Patients lost to follow-up or who received autologous bone grafting were excluded. The patients (n = 1,735) were divided into the VLP fixation alone (Group VLA) and VLP fixation with bone substitutes (Group VLS). Propensity score matching of background characteristics (ratio, 4:1) was performed. The modified Mayo wrist scores (MMWS) were evaluated as clinical outcomes. The implant failure rate, bone union rate, volar tilt (VT), radial inclination (RI), ulnar variance (UV) and distal dorsal cortical distance (DDD) were evaluated as radiologic parameters. We also compared the initial surgery cost and total cost for each group. Results: After matching, the backgrounds of Groups VLA (n = 388) and VLS (n = 97) were not significantly different. The MMWS values of the groups were not significantly different. Radiographic evaluation revealed no implant failure in either group. Bone union was confirmed in all patients in both groups. The VT, RI, UV and DDD values of the groups were not significantly different. The initial surgery cost and total cost in the VLS group were significantly higher than those in the VLA group ($3,515 vs. $3,068, p < 0.001). Conclusions: In patients of ≥65 years of age with DRF, the clinical and radiological outcomes of VLP fixation with bone substitutes did not differ from those of VLP fixation alone, yet the additional use of bone augmentation was associated with higher medical costs. The indications for bone substitutes should be more strictly considered in the elderly with DRF. Level of Evidence: Level IV (Therapeutic).

Ultrasonographic evaluation of contact configuration between flexor pollicis longus tendon and the volar prominence of volar plate in patients with distal radius fracture

INTRODUCTION

We classified the contact configuration between the volar prominence of volar locking plate (VLP) and flexor pollicis longus (FPL) tendon using ultrasound (US) into indentation contact and smooth contact, and investigated whether the contact configuration is associated with the flexor tendon attrition.

MATERIALS AND METHODS

Ninety-four patients who underwent VLP removal were included in this study. We assessed pain using visual analogue scale, grip strength, and Disabilities of the Arm, Shoulder and Hand score for clinical evaluations, radial inclination, palmar tilt, ulnar variance, and Soong classification for radiological evaluations, and contact configuration using US at 1 year after VLP fixation. After these evaluations, we removed the VLP with observation for the presence of fibrillation or wear of FPL tendon substance. Subsequently, we classified the patients into either of FPL attrition and FPL intact group.

RESULTS

Twenty-eight patients had indentation contact configuration and 66 patients had smooth contact configuration. The kappa value for inter-observer reliability for the contact configuration was 0.78. Twelve patients were included in the FPL attrition group and 82 in the FPL intact group. There was no significant difference in clinical outcomes and Soong classification between the groups. However, palmar tilt of the flexor tendon attrition group was significantly lower than that of the flexor tendon intact group and the FPL attrition group showed significantly higher indentation contact configuration rate than the FPL intact group. FPL tendon attrition was diagnosed using the contact configuration on US with a sensitivity of 100% and specificity of 80%.

CONCLUSION

This study demonstrated that FPL tendon attrition was significantly associated with indentation contact on US with high sensitivity. Therefore, we recommend selective implant removal in patients with indentation contact configuration.

[Cement augmentation and bone graft substitutes-Materials and biomechanics]

BACKGROUND

Materials with different characteristics are used for cement augmentation and as bone graft substitutes.

OBJECTIVE

Cement augmentation and bone graft substitutes are the subject of current research. The evaluation of new knowledge allows its specific application.

MATERIAL AND METHODS

Selective literature search and outline of experimental research results on cement augmentation and bone graft substitutes.

RESULTS

Augmentation and bone graft substitutes are essential components of current trauma surgical procedures. Despite intensive research all materials have specific disadvantages. Cement augmentation of implants enhances not only the anchorage but also influences the failure mode.

CONCLUSION

Cement augmentation has large potential especially in osteoporotic bone. In load-bearing regions acrylic-based cements remain the standard of choice. Ceramic cements are preferred in non-load-bearing areas. Their combination with resorbable metals offers still largely unexplored potential. Virtual biomechanics can help improve the targeted application of cement augmentation.

The "Three in One" Bone Repair Strategy for Osteoporotic Fractures

In aging society, osteoporotic fractures have become one major social problem threatening the health of the elderly population in China. Compared with conventional fractures, low bone mass, bone defect and retarded healing issues of osteoporotic fractures lead to great difficulties in treatment and rehabilitation. Addressing major concerns in clinical settings, we proposed the "three in one" bone repair strategy focusing on anti-osteoporosis therapies, appropriate bone grafting and fracture healing accelerating. We summarize misconceptions and repair strategies for osteoporotic fracture management, expecting improvement of prognosis and clinical outcomes for osteoporotic fractures, to further improve therapeutic effect and living quality of patients.

Expert consensus on the bone repair strategy for osteoporotic fractures in China

Osteoporotic fractures, also known as fragility fractures, are prevalent in the elderly and bring tremendous social burdens. Poor bone quality, weak repair capacity, instability, and high failure rate of internal fixation are main characteristics of osteoporotic fractures. Osteoporotic bone defects are common and need to be repaired by appropriate materials. Proximal humerus, distal radius, tibia plateau, calcaneus, and spine are common osteoporotic fractures with bone defect. Here, the consensus from the Osteoporosis Group of Chinese Orthopaedic Association concentrates on the epidemiology, characters, and management strategies of common osteoporotic fractures with bone defect to standardize clinical practice in bone repair of osteoporotic fractures.

Use of Osteobiologics for Fracture Management: The When, What, and How

Osteobiologics are defined as a group of natural and synthetic materials used to augment bone healing. The selection of the most appropriate osteobiologic from the growing list of available options can be a challenging task. In selecting a material, surgeons should weigh a variety of considerations, including the indication for their use (the when), the most suitable substance (the what), and the correct mode of application (the how). This summary reviews these considerations and seeks to provide the surgeon with a basis for informed clinical evidence-based decision-making in their choice of a successful option.

An Assessment of Randomized Controlled Trial Quality in The Journal of Bone & Joint Surgery: Update from 2001 to 2013

BACKGROUND

The quality of reporting of randomized controlled trials (RCTs) published in The Journal of Bone & Joint Surgery (JBJS) from 1988 to 2000 was previously analyzed. The purpose of this current study was to analyze the quality of reporting of RCTs published in JBJS from 2001 to 2013 to identify trends over time and potential areas of improvement for future clinical trials.

METHODS

A manual search of the JBJS database identified RCTs published between January 2001 and December 2013. Quality assessments, using the Detsky quality-of-reporting index (Detsky score), a modified Cochrane risk-of-bias tool, and abstraction of relevant data identifying predictors of quality, were conducted.

RESULTS

A total of 5,780 publications were identified in JBJS from 2001 to 2013, with 285 RCTs (4.9%), representing an increase from the prior 13-year period. The overall mean transformed Detsky score (and standard error) increased significantly (p < 0.001) from 68.1% ± 1.67% to 76.24% ± 0.72%. The percentage of multicenter RCTs decreased from 67% to 31%. The percentage of positive trials also decreased from 80% to 50.5%, as did the mean sample size (212 to 166). Regression analysis indicated that trials with an epidemiologist as the first author and nonsurgical trials were significantly associated (p = 0.001) with a higher overall trial quality score. The categories of the lowest mean methodology scores were randomization and concealment, eligibility criteria, and reasons for patient exclusion, as identified with the Detsky score, and patient and assessor blinding, as identified with the risk-of-bias assessment.

CONCLUSIONS

The quantity and quality of published RCTs in JBJS have increased in the 2001 to 2013 time period compared with the previous time period. Although these improvements are encouraging, trends to smaller, single-center trials were also observed. To efficiently determine the efficacy of orthopaedic treatments and limit bias, high-quality randomized trials of appropriate sample size and rigorous design are needed.

Unidirectional Porous β-Tricalcium Phosphate: A New Bone Filling Substitute for Treatment of Distal Radius Fracture in the Elderly Population

Background: A new beta-tricalcium phosphate with unidirectional pore structure (UDPTCP), Affinos^® (Kurray, Okayama, Japan), has been in clinical use since 2015. To date, there have been only a few clinical studies using this material. We report here the first clinical study for distal radial fracture in the elderly population treated with UDPTCP. Methods: Consecutive patients aged 65 years or older with dorsally displaced unstable fracture of the distal radius (n = 36) were treated operatively in our department. Following reduction of the fracture site, a 7 mm size cube of UDPTCP was placed in the gap of the bony defect and the fracture stabilized with mono-axial or poly-axial type locking plates and screws. Remodeling of the UDPTCP was evaluated by plain radiograph and clinical outcomes were also assessed. Results: UDPTCP was significantly resorbed at 2 months after surgery, both at the center and periphery of the material. Complications were only observed in the post-operative period. Significant correction loss of radial alignment was seen in patients stabilized with poly-axial locking plate. The clinical outcome in all cases was excellent. Conclusions: Block UDPTCP is a safe and convenient material for the treatment of distal radius fracture and is replaced within a suitable time period after grafting into the fracture site. UDPTCP and stable internal fixation is therefore a reliable strategy for restoring and preserving anatomical position, especially in the elderly population.

Augmented Fixation for Fractures of the Appendicular Skeleton

Despite advances in technology such as locked plating, osteoporotic bone and bone defects remain challenging complications for orthopaedic surgeons. The concept of augmented fixation is useful in these settings. Augmented fixation can be described as improving construct strength and stability by enhancing the surrounding environment. By understanding and using the techniques of alternative fixation strategies, endosteal or medullary support, structural grafting, or the use of bone graft substitutes in combination with standard or integrated fixation, surgeons can improve the chances of success when treating difficult fractures. The purpose of this article is to introduce the reader to the concept of augmented fixation, review strategies for its application, and review applicable published results.

Emerging Technologies in Distal Radius Fracture Fixation

PURPOSE OF REVIEW

To provide an overview of emerging fixation constructs and materials used in the operative management of distal radius fractures.

RECENT FINDINGS

The indications, advantages, and disadvantages of relatively new implants and devices used to treat distal radius fractures are discussed. These include the intramedullary nail, intramedullary cage, radiolucent volar locking plate, distal radius hemiarthroplasty, and bone graft substitutes. The spectrum of distal radius fracture patterns may make it impossible to depend on a single device for fixation, and surgeons managing distal radius fractures should be adept at using various surgical approaches, techniques, and hardware systems. Additional studies demonstrating the cost-effectiveness, biomechanical properties, and clinical outcomes will be useful in determining the utility of the described techniques.

Treatment of radius or ulna fractures in the elderly: A systematic review covering effectiveness, safety, economic aspects and current practice

Background

The objective of the present study was to evaluate effectiveness, complications and cost-effectiveness of any surgical or non-surgical treatment for radius or ulna fractures in elderly patients. Secondary objectives were to analyze present treatment traditions of distal radius fractures (DRF) in Sweden and to calculate resource usage for its treatment.

Methods and findings

The assessment contains a systematic review of clinical and health economic studies comparing treatment options for radius or ulna fractures. The results regarding the effectiveness of the treatments are summarized in meta-analyses. In addition, the assessment contains a cost analysis for different treatment options commonly used for DRF care, and an analysis of registry data on the incidence and treatment of DRF. In total 31 randomized controlled trials were included in meta-analyses. When comparing functional outcome for plate fixation versus non-surgical treatment for DRF, there were no clinically important differences at one-year follow-up (mean difference [MD], -3.29, 95% CI, -7.03; 0.44). Similar results were found when comparing plating and percutaneous methods with respect to functional outcome (standardized mean difference [SMD], -0.07, 95% CI, -0.21; 0.07) and grip strength (MD, -3.47, 95% CI, -11.21; 4.28). There were no differences for minor complications, (risk difference [RD], -0.01, 95% CI, -0.07; 0.05) whereas major complications were less common for the percutaneous group, (RD, 0.02, 95% CI, 0.02; 0.03). Given the low number of studies, the evidence above was rated as moderate certainty. The cost for plate fixation versus plaster cast was estimated to 1698 compared to 137 US dollars. For DRF, plate fixation increased in Sweden between 2005 and 2013, and was the most common surgical method in 2013.

Conclusions

Surgical treatment of moderately displaced distal radius fractures in elderly patients offers no clear benefit compared to non-surgical treatment. Plating procedures have become more common during the second millennium and involve higher costs and higher risk of major complications than percutaneous options.

Treatment goals for distal radius fractures in 2018: recommendations and practical advice

The goals of distal radius fracture treatment in patients above 65 years of age would not change over time if the fracture were the only factor to consider. However, people change, and fixation methods also change. Since this fracture heals in nearly every case and volar plates have eliminated the worry of malunion, we are left with two main goals. In active patients with weakened bones, the aim is to help them regain their quality of life as quickly as possible while avoiding iatrogenic conditions. This compromise is possible because of new tools-but at what price?

Longitudinal recovery following distal radial fractures managed with volar plate fixation

AIMS

To synthesise the literature and perform a meta-analysis detailing the longitudinal recovery in the first two years following a distal radius fracture (DRF) managed with volar plate fixation.

MATERIALS AND METHODS

Three databases were searched to identify relevant articles. Following eligibility screening and quality assessment, data were extracted and outcomes were assimilated at the post-operative time points of interest. A state-of-the-art longitudinal mixed-effects meta-analysis model was employed to analyse the data.

RESULTS

The search identified 5698 articles, of which 46 study reports met the selection criteria. High levels of disability and impairment were reported in the immediate post-operative period with subsequently a rapid initial improvement followed by more gradual improvement for up to one year. The results highlight that the period associated with the greatest physical recovery is in the first three months and suggest that the endpoint of treatment outcomes is best measured at one year post-surgery.

CONCLUSION

Clinically meaningful improvements in outcomes can be expected for 12 months, after which progress plateaus and reaches normal values. This paper adopted a novel approach to meta-analyses in that the research question was of a longitudinal nature, which required a unique method of statistical analysis. Cite this article: Bone Joint J 2017;99-B:1665-76.

Comparison of outcomes between partially healed and acute metaphyseally malaligned distal radial fracture treated by palmar locking plate fixation

BACKGROUND

The purpose of this study was to determine whether a partially healed (surgical delay of 2-6 weeks) metaphyseally malaligned distal radius fracture (DRF) treated using the extended palmar approach with palmar locking plate fixation has poorer clinical or radiological outcomes than those of acute (surgical delay of ≤2 weeks) metaphyseally unstable DRF treated by palmar locking plate fixation.

METHODS

We identified 24 patients (Group A) who were treated with palmar locking plate for a partially healed (surgical delay of 2-6 weeks) metaphyseally malaligned DRF. We selected 48 patients (Group B) who were treated with palmar locking plate among the acute (surgical delay of ≤2 weeks) metaphyseally unstable DRF to be individually matched in a 1:2 ratio for sex, age, and fracture type. The two study groups were compared with respect to clinical and radiological parameters. The clinical parameters examined were; wrist range of motion (flexion, extension, supination, and pronation), grip strength, and Disabilities of Arm, Shoulder and Hand (DASH) scores. Radiological measurements included radial inclination, palmar angulation, and ulnar variance.

RESULTS

The wrist flexion and grip strength were significantly greater in group B than group A at 3 months postoperatively. However, wrist ranges of motion, grip strengths, and DASH scores were not significantly different at 1 year postoperatively. Radiographic evaluation demonstrated no intergroup difference in terms of radial inclination, palmar angulation, or ulnar variance at 1 year postoperatively.

CONCLUSIONS

Partially healed metaphyseally malaligned healed DRFs had inferior clinical outcomes to acute metaphyseally unstable DRFs in an early postoperative period, however, achieved similar clinical outcomes at 1 year postoperatively when treated using palmar locking plate fixation.

Intra-articular comminution worsens outcomes of distal radial fractures treated by open reduction and palmar locking plate fixation

We studied 50 patients with AO type C2 distal radial fractures and 35 with AO type C3 distal radial fractures treated by open reduction and palmar locking plate fixation. At 3-month clinical assessments, mean wrist flexion arcs, grip strengths and disabilities of the arm, shoulder and hand scores were significantly better for AO type C2 fractures. At 2-year post-operative clinical assessments, mean disabilities of the arm, shoulder and hand scores were significantly better for AO type C2 fractures than for AO type C3 fractures. At 2-year radiographic examinations, anterior angulations, ulnar variances and arthritis grades were also significantly better for AO type C2 fractures. This study showed that AO type C3 distal radial fractures, which have intra-articular comminution, had poorer clinical and radiographic outcomes than AO type C2 fractures, despite open reduction and palmar locking plate fixation.

LEVEL OF EVIDENCE

IV.

When is the stability of a fracture fixation limited by osteoporotic bone?

This article is concerned with the search for threshold values for bone quality beyond which the risk of fixation failure increased. For trochanteric fractures we recognized a BMD lower than 250mg/cm(3) as an additional risk for cut out. For medial femoral neck fractures since joint replacement surgery is available and produces excellent functional results, we see no indication for further differentiation or analysis of bone quality in relation to fracture fixation. In the area of osteoporotic vertebral body fractures, there are many experimental studies that try to identify BMD limits of screw fixation in the cancellous bone on the basis of QCT analysis. However, these values have not yet been introduced for application in clinical practice. In case of indication for surgical fixation, we favor minimally invasive, bisegmental, fourfold dorsal instrumentation with screw-augmentation for a T-value less than -2.0 SD (DXA analysis, total hip or total lumbar spine). For proximal humerus fractures, BMD value of 95mg/cm(3) could be seen as a threshold value below which the risk of failure rises markedly. In relation to osteoporotic distal radius fractures, based on our clinical experience and scientific analyses there are virtually no restrictions as far as bone quality is concerned on the application of palmar locking implants in the surgical management of distal radius fractures. Optimization of preoperative diagnostics might help to revise the treatment algorithm to take bone density into account, thus reducing the risk of failure and, at the same time, acquiring additional data for future reference.

The Effect of Displaced Dorsal Rim Fragment in a Distal Radius Fracture

Background In intra-articular fracture of distal radius, the intra-articular fragments can be divided into some specific fragments. In particular, the poor outcomes have been well documented for reduction loss of the volar lunate facet, but the effect of a displaced dorsal rim fracture has rarely been addressed. Materials and Methods The records of 26 patients with dorsal rim fragment displaced by more than 2 mm after volar locking plate (VLP) fixation for a dorsally displaced distal radius fracture (DRF) treated from March 2006 to March 2009 were retrospectively reviewed. Clinical assessments including grip strengths, wrist range of motions, and Disabilities of Arm, Shoulder, and Hand (DASH) scores were performed at 12 months postoperatively. Widths of the distal ends of dorsal rims were determined by preoperative computed tomography (CT). Dorsal rim fragment displacements were measured in immediate postoperative plain lateral radiographs. Radial inclination, volar tilt, and ulnar variance were measured on immediate postoperative wrist radiographs. Arthritic changes of radiocarpal joints were graded using radiographs obtained at 12 months postoperatively. Description of Technique DRFs were fixed using a VLP in the usual manner. Although DRF displacement was noticed after plate fixation, no further procedure was performed. The sizes of articular portions of dorsal rim fragments were measured arthroscopically in 5 of the 26 patients at the time of plate fixation. Results At 12 months postoperatively, mean grip strength, wrist flexion arc, and mean wrist extension arc were 86 ± 13, 87 ± 11, and 91 ± 10%, respectively, of contralateral sides. Mean forearm supination and pronation were 96 ± 8 and 99 ± 5%, respectively, of contralateral sides. Mean DASH score was 11 ± 10 points. Preoperatively, mean width of the distal end of dorsal rim fragments and mean displacements of dorsal rim fragments were 2.0 ± 0.6 and 3.0 ± 0.9 mm, respectively. Mean width of the articular portions of dorsal rim fragment by arthroscopic examination was 1.0 ± 0.4 mm. Mean radial inclination was 21 ± 4.8 degrees, mean volar angulation was 4.8 ± 3.9 degrees, and mean ulnar variance was 0.6 ± 1.8 mm at immediate postoperatively. Two patients showed grade I arthritic changes at 12 months postoperatively. Conclusions The articular portions of dorsal rim fragments measured arthroscopically were smaller than determined by CT. Furthermore, the study shows that displaced dorsal rim fragments in dorsally displaced DRFs treated by VLP do not adversely affect wrist clinical outcomes.

Bone graft substitutes and bone morphogenetic proteins for osteoporotic fractures: what is the evidence?

Despite improvements in implants and surgical techniques, osteoporotic fractures remain challenging to treat. Among other major risk factors, decreased expression of morphogenetic proteins has been identified for impaired fracture healing in osteoporosis. Bone grafts or bone graft substitutes are often used for stabilizing the implant and for providing a scaffold for ingrowth of new bone. Both synthetic and naturally occurring biomaterials are available. Products generally contain hydroxyapatite, tricalcium phosphate, dicalcium phosphate, calcium phosphate cement, calcium sulfate (plaster of Paris), or combinations of the above. Products have been used for the treatment of osteoporotic fractures of the proximal humerus, distal radius, vertebra, hip, and tibia plateau. Although there is generally consensus that screw augmentation increased the biomechanical properties and implant stability, the results of using these products for void filling are not unequivocal. In osteoporotic patients, Bone Morphogenetic Proteins (BMPs) have the potential impact to improve fracture healing by augmenting the impaired molecular and cellular mechanisms. However, the clinical evidence on the use of BMPs in patients with osteoporotic fractures is poor as there are no published clinical trials, case series or case studies. Even pre-clinical literature on in vitro and in vivo data is weak as most articles focus on the beneficial role for BMPs for restoration of the underlying pathophysiological factors of osteoporosis but do not look at the specific effects on osteoporotic fracture healing. Limited data on animal experiments suggest stimulation of fracture healing in ovariectomized rats by the use of BMPs. In conclusion, there is only limited data on the clinical relevance and optimal indications for the use of bone graft substitute materials and BMPs on the treatment of osteoporotic fractures despite the clinical benefits of these materials in other clinical indications. Given the general compromised outcome in osteoporotic fractures and limited alternatives for enhancement of fracture healing, clinicians and researchers should focus on this important topic and provide more data in this field in order to enable a sound clinical use of these materials in osteoporotic fractures.

Does osteoporosis have a negative effect on the functional outcome of an osteoporotic distal radial fracture treated with a volar locking plate?

We performed a retrospective study to determine the effect of osteoporosis on the functional outcome of osteoporotic distal radial fractures treated with a volar locking plate. Between 2009 and 2012 a total of 90 postmenopausal women with an unstable fracture of the distal radius treated with a volar locking plate were studied. Changes in the radiological parameters of 51 patients with osteoporosis (group 1, mean age 66.9, mean T-score –3.16 (sd 0.56)) were not significantly different from those in 39 patients without osteoporosis (group 2, mean age 61.1, mean T-score –1.72 (sd 0.57)). The mean Disabilities of the Arm, Shoulder and Hand (DASH) score at final follow-up was 11.5 (sd 12.2) in group 1 and 10.5 (sd 13.25) in group 2. The mean modified Mayo wrist score at final follow-up was 79.0 (sd 14.04) in group 1 and 82.6 (sd 13.1) in group 2. However, this difference was not statistically significant (p = 0.35 for DASH score, p = 0.2 for modified Mayo wrist score). Univariable and multivariable logistic regression analysis showed that only the step-off of the radiocarpal joint was related to both a poor DASH and modified Mayo wrist score. Pearson’s correlation coefficient showed a weak negative relationship only between the T-score and the change in volar tilt (intraclass coefficient –0.26, p = 0.02).

We found that osteoporosis does not have a negative effect on the functional outcome and additional analysis did not show a correlation between T-score and outcome.

Cite this article: Bone Joint J 2015;97-B:229–34.

Orthobiologics in the augmentation of osteoporotic fractures

Many orthobiologic adjuvants are available and widely utilized for general skeletal restoration. Their use for the specific task of osteoporotic fracture augmentation is less well recognized. Common conductive materials are reviewed for their value in this patient population including the large group of allograft adjuvants categorically known as the demineralized bone matrices (DBMs). Another large group of alloplastic materials is also examined-the calcium phosphate and sulfate ceramics. Both of these materials, when used for the proper indications, demonstrate efficacy for these patients. The inductive properties of bone morphogenic proteins (BMPs) and platelet concentrates show no clear advantages for this group of patients. Systemic agents including bisphosphonates, receptor activator of nuclear factor κβ ligand (RANKL) inhibitors, and parathyroid hormone augmentation all demonstrate positive effects with this fracture cohort. Newer modalities, such as trace ion bioceramic augmentation, are also reviewed for their positive effects on osteoporotic fracture healing.

Increased risk of hip fractures in patients with dementia: a nationwide population-based study

BACKGROUND

Dementia has been associated with an increased risk of hip fracture. However, little research has been conducted on the impact of dementia on wrist or vertebral fracture development. The aim of this study was to investigate whether dementia is a risk factor for different types of fracture in Taiwan.

METHODS

The study sample was drawn from Taiwan's National Health Insurance Research Database of reimbursement claims, and comprised 1408 patients who visited ambulatory care centers or were hospitalized with a diagnosis of dementia. The comparison group consisted of 7040 randomly selected individuals. Cox proportional hazard regression model was used to examine associations between dementia and the risk of different types of fracture.

RESULTS

During a 3-year follow-up period, 264 patients with dementia (18.75%) and 1098 patients without dementia (15.60%) developed fractures. Dementia was independently associated with increased risk of hip fracture [adjusted hazard ratio (HR) 1.92, 95% CI 1.48-2.49]. Patients with dementia and osteoporosis had the highest risk of developing hip fracture (adjusted HR 2.27, 95% CI 1.28-4.01). Dementia did not increase wrist fracture or vertebral fracture risk when compared to the control group, even in patients with osteoporosis.

CONCLUSIONS

Individuals with dementia are at greater risk of developing hip fracture, particularly if they also have osteoporosis. Early mental screening programs and health education should be initiated to decrease disability and dependence in patients with dementia.

The use of bone cement in difficult distal radius fractures

BACKGROUND

The lack of structural support remains a challenge in the treatment of comminuted distal radius fractures. Calcium phosphate and calcium sulfate bone cement has been used in other fracture locations in addition to fixation and has been shown to allow for retention of reduction in difficult cases.

METHODS

A case-control retrospective review of 34 consecutive distal radius fractures treated with surgery was performed with the patients classified by Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification. Complications and postoperative radiographs were evaluated.

RESULTS

Cement was used in the most difficult cases. Radial height was retained in both groups. Volar tilt was significantly better in the cement group. There were no significant differences between the case and control groups for any complication. No complications related to the use of the cement were found.

CONCLUSIONS

The use of bone cement as an adjunct to fixation of distal radius fractures seems to include minimal risks and may afford a technical advantage in maintaining reduction during surgery for difficult fractures. Since there is an aspect of fracture difficulty that we cannot control for by using radiographic assessment alone, cement may provide an advantage over fixation without cement, despite similar outcomes. Bone cement can be part of the "tool box" for difficult distal radius fractures. Further study is necessary to define the technical advantages and limitations of each particular cement product.

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability

PURPOSE

Distal radius fractures represent the most common fractures in adults. Volar locking plating to correct unstable fractures has become increasingly popular. Although reasonable primary reduction is possible in most cases, maintenance of reduction until the fracture is healed is often problematic in osteoporotic bone. To our knowledge, no biomechanical studies have compared the effect of enhancement with biomaterial on two different volar fixed-angle plates.

METHODS

Human fresh-frozen cadaver pairs of radii were used to simulate an AO/OTA 23-A3 fracture. In a total of four groups (n = 7 for each group), two volar fixed-angle plates (Aptus 2.5 mm locking fracture plate, Medartis, Switzerland and VA-LCP two-column distal radius plate 2.4, volar, Synthes, Switzerland) with or without an additional injection of a biomaterial (Hydroset Injectable HA Bone Substitute, Stryker, Switzerland) into the dorsal comminution zone were used to fix the distal metaphyseal fragment. Each specimen was tested load-controlled under cyclic loading with a servo-hydraulic material testing machine. Displacement, stiffness, dissipated work and failure mode were recorded.

RESULTS

Improved mechanical properties (decreased displacement, increased stiffness, decreased dissipated work) were found in both plates if the biomaterial was additionally injected. Improvement of mechanical parameters after biomaterial injection was more evident in the Synthes plate compared to the Aptus plate. Pushing out of the screws was noticed as a failure mode only in samples lacking supplementary biomaterial.

CONCLUSIONS

Injection of a biomaterial into the dorsal comminution zone increases stability after volar locking plating of distal radius fractures in vitro.

Outcomes after volar plate fixation of low-grade open and closed distal radius fractures are similar

BACKGROUND

Low-grade (Gustilo and Anderson Type I or II) open distal radius fractures (DRFs) have been treated by volar locking plate fixation. However, it is unclear whether the outcomes after volar locking plate fixation for low-grade open DRFs are comparable to those for closed DRFs.

QUESTIONS/PURPOSES

We asked whether low-grade open DRFs had worse DASH scores and higher infection rates than closed DRFs when the DRFs were treated by volar plate fixation.

METHODS

Twenty consecutive patients treated by volar locking plate fixation for low-grade open DRFs constituted the open fracture group, and 40 patients were selected from among the total number of patients treated by volar, locking plate fixation for closed DRFs as the closed fracture group. Complications including infection were recorded. Clinical outcomes and radiographic assessments were performed postoperatively at 3 months and 1 year.

RESULTS

At 3 postoperative months, wrist flexion and extension, grip strengths, and DASH scores were better in the closed fracture group; however, no difference was observed postoperatively between the two groups in terms of any functional outcome measure at 1 year. Any of the radiographic parameters were not different between the groups. There were no differences in infection rate and in any other complication rate between the groups.

CONCLUSIONS

Although functional outcomes of open DRFs were inferior to those of closed DRFs at 3 months, at 1 year, outcomes of low-grade open DRFs were found to be comparable to those of closed DRFs when volar plate fixation was used.

Opening wedge distal femoral varus osteotomy using the Puddu plate and calcium phosphate bone cement

PURPOSE

The goal of this study was to document the outcome at midterm follow-up of 19 patients treated for lateral osteoarthritis of the knee between 1999 and 2007. It was our hypothesis that the results and complication rate would be comparable to or better than those reported in the literature for closing wedge or alternative open wedge techniques.

METHODS

All patients underwent an open wedge distal femoral varisation osteotomy using the Puddu plate system combined with calcium phosphate injection into the defect. Knee Society Knee Score and Kellgren-Lawrence osteoarthritis score were assessed preoperatively and at final follow-up.

RESULTS

The average knee score improved significantly from 43 ± 8 preoperatively to 78 ± 23 at final follow-up. The Kellgren-Lawrence osteoarthritis score remained unchanged. Kaplan-Meier analysis using revision surgery or conversion to TKA as an endpoint demonstrated an 82% successful survivorship at 7 years of follow-up.

CONCLUSION

Based upon these results, we believe that a distal femoral varisation osteotomy using the Puddu plate and injectable bone cement is an equivalent treatment option compared to closing wedge techniques and leading to good results at midterm follow-up in patients with lateral gonarthrosis and valgus alignment.

LEVEL OF EVIDENCE

IV.

Distal radius fracture fixation with volar locking plates and additional bone augmentation in osteoporotic bone: a biomechanical study in a cadaveric model

BACKGROUND

Fractures of the distal radius represent the most common fractures in adults. Volar locked plating has become a popular method for treating these fractures, but has been subject to several shortcomings in osteoporotic bone, such as loss of reduction and screw purchase. In order to overcome these shortcomings, cement augmentation has been proposed.

METHODS

AO-type 23-A3.3 fractures were made in 8 pairs of fresh frozen osteoporotic cadaveric radial bones. All specimens were treated with volar plating, and divided into cement augmentation or non-augmentation groups (n = 8/group). Constructs were tested dynamically and load to failure, construct-stiffness, fracture gap movement and screw cutting distance were measured.

RESULTS

Cement augmentation resulted in a significant increase in cycles and load to failure, as well as construct stiffness at loads higher than 325 N. When compared to the non-augmented group, fracture gap movement decreased significantly at this load and higher, as did screw cutting distance at the holes of the ulnar column. The cycles to failure depend on the BMD in the distal region of the radius.

CONCLUSION

Cement augmentation improves biomechanical properties in volar plating of the distal radius.

Early initiation of bisphosphonate does not affect healing and outcomes of volar plate fixation of osteoporotic distal radial fractures

BACKGROUND

Bisphosphonates can adversely affect fracture-healing because they inhibit osteoclastic bone resorption. It is unclear whether bisphosphonates can be initiated safely for patients who have sustained an acute distal radial fracture. The purpose of this randomized study was to determine whether the early use of bisphosphonate affects healing and outcomes of osteoporotic distal radial fractures treated with volar locking plate fixation.

METHODS

Fifty women older than fifty years of age who had undergone volar locking plate fixation of a distal radial fracture and had been diagnosed with osteoporosis were randomized to Group I (n = 24, initiation of bisphosphonate treatment at two weeks after the operation) or Group II (n = 26, initiation of bisphosphonate treatment at three months). Patients were assessed for radiographic union and other radiographic parameters (radial inclination, radial length, and volar tilt) at two, six, ten, sixteen, and twenty-four weeks, and for clinical outcomes that included Disabilities of the Arm, Shoulder and Hand (DASH) scores, wrist motion, and grip strength at twenty-four weeks. The two groups were compared with regard to the time to radiographic union, the radiographic parameters, and the clinical outcomes.

RESULTS

No significant differences were observed between the two groups with respect to radiographic or clinical outcomes after volar locking plate fixation. All patients obtained fracture union, and the mean times to radiographic union in Groups I and II were similar (6.7 and 6.8 weeks, respectively; p = 0.65). Furthermore, the time to radiographic union was not related to osteoporosis severity or fracture type.

CONCLUSIONS

In patients with an osteoporotic distal radial fracture treated with volar locking plate fixation, the early initiation of bisphosphonate treatment did not affect fracture-healing or clinical outcomes.

LEVEL OF EVIDENCE

Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.