Ten-year follow-up of a rotating-platform, posterior-stabilized total knee arthroplasty

Modern implants in total knee arthroplasty are more patellofemoral joint friendly compared to their traditional design: a systematic review and meta-analysis

BACKGROUND

Implant designs for total knee arthroplasties (TKA) are continuously evolving to improve outcomes and satisfaction rates after TKA. The present systematic review and meta-analysis aimed to explore the evidence in the literature regarding the outcomes of the Attune knee system over the PFC Sigma knee design and investigate the advantage of one over the other.

METHODS

A systematic review and meta-analysis of published studies till August 2021 was performed using the defined eligibility criteria. This was a systematic review of the literature published in the Cochrane Central Register of Controlled Trials (CENTRAL) Library, PUBMED, and EMBASE. The analysis included prospective and retrospective comparative trials comparing TKA by PFC sigma or Attune posterior stabilized (PS) or cruciate-retaining (CR), fixed bearing, or rotating platform systems. Patient-reported outcome measures (PROM) and postoperative patellar complications were analysed in the studies utilizing attune knee system (modern implants) to its counterpart PFC sigma (traditional implants) for TKA. Quality assessment was conducted using NIH Quality Assessment Tool for controlled intervention studies (RCTs and case-control studies).

RESULTS

This review included 3 RCTs and the rest, 10 of which were non-RCT, including 5852 patients. ATTUNE designs suggested a statistically significant improvement in KSS over PFC Sigma designs. Other PROMs such as OKS and WOMAC scores yielded comparable results between the two groups. ATTUNE knee prosthesis did not result in better knee range of motion, patient satisfaction, or radiological outcomes than the PFC design. Regarding the complications, attune knee prosthesis demonstrated favourable results over PFC Sigma for anterior knee pain and patellofemoral (PF) crepitus.

CONCLUSIONS

The present systematic review highlights better KSS and lesser chances of PF complications favouring a modern implant design over its traditional counterpart. Other patient-reported outcome analyses at a short-term follow-up period were comparable among patients undergoing total knee replacements with two different implant designs. Radiological outcomes for component positioning also suggested similar results among the two groups.

Local Periarticular Infiltration with Dexmedetomidine Results in Superior Patient Well-Being after Total Knee Arthroplasty Compared with Peripheral Nerve Blocks: A Randomized Controlled Clinical Trial with a Follow-Up of Two Years

BACKGROUND

This study aimed to compare local periarticular infiltration (LIA) with ultra-sound guided regional anesthesia (USRA) with ropivacaine and dexmedetomidine as an additive agent in primary total knee arthroplasty (TKA).

METHODS

Fifty patients were randomized into two groups in a 1:1 ratio. Patients in the LIA group received local periarticular infiltration into the knee joint. The USRA group received two single-shot USRA blocks. Functional outcomes and satisfaction (range of movement, Knee Society Knee Score, Western Ontario and McMaster Universities Osteoarthritis Index, Oxford Knee Score, and Forgotten Joint Score), including well-being, were analyzed preoperatively and at five days, six weeks, and one and two years postoperatively.

RESULTS

Functional outcomes did not significantly differ between the two groups at six weeks and one and two years after the implementation of TKA. A moderate correlation was observed in the LIA group regarding well-being and pain on day five. Six weeks postoperatively, the LIA group showed significantly superior well-being but worse pain scores. No differences between the groups in well-being and functional outcomes could be observed one and two years postoperatively.

CONCLUSION

Patients treated with LIA had superior postoperative well-being in the early postoperative phase of up to six weeks. Furthermore, LIA patients had similar functionality compared to patients treated with USRA but experienced significantly more pain six weeks postoperatively. LIA leads to improved short-term well-being, which is potentially beneficial for faster knee recovery. We believe that LIA benefits fast-track knee recovery with respect to improved short-term well-being, higher practicability, and faster application.

High rate of radiolucent lines following the cemented original design of the ATTUNE total knee arthroplasty

Aims

Loosening of components after total knee arthroplasty (TKA) can be associated with the development of radiolucent lines (RLLs). The aim of this study was to assess the rate of formation of RLLs in the cemented original design of the ATTUNE TKA and their relationship to loosening.

Methods

A systematic search was undertaken using the Cochrane methodology in three online databases: MEDLINE, Embase, and CINAHL. Studies were screened against predetermined criteria, and data were extracted. Available National Joint Registries in the Network of Orthopaedic Registries of Europe were also screened. A random effects model meta-analysis was undertaken.

Results

Of 263 studies, 12 were included with a total of 3,861 TKAs. Meta-analysis of ten studies showed high rates of overall tibial or femoral RLLs for the cemented original design of the ATTUNE TKA. The overall rate was 21.4% (95% confidence interval (CI) 12.7% to 33.7%) for all types of design but was higher for certain subgroups: 27.4% (95% CI 13.4% to 47.9%) for the cruciate-retaining type, and 29.9% (95% CI 15.6% to 49.6%) for the fixed-bearing type. Meta-analysis of five studies comparing the ATTUNE TKA with other implants showed a significantly higher risk of overall tibial or femoral RLLs (odds ratio (OR) 2.841 (95% CI 1.219 to 6.623); p = 0.016) for the ATTUNE. The rates of loosening or revision for loosening were lower, at 1.2% and 0.9% respectively, but the rates varied from 0% to 16.3%. The registry data did not report specifically on the original ATTUNE TKA or on revision due to loosening, but 'all-cause' five-year revision rates for the cemented ATTUNE varied from 2.6% to 5.9%.

Conclusion

The original cemented ATTUNE TKA has high rates of RLLs, but their clinical significance is uncertain given the overall low associated rates of loosening and revision. However, in view of the high rates of RLLs and the variation in the rates of loosening and revision between studies and registries, close surveillance of patients who have undergone TKA with the original ATTUNE system is recommended.

The Outcome of Posterior-Stabilized, Rotating Platform Total Knee Arthroplasty at a Minimum Ten-Year Follow-Up, a Middle East Institution Experience

Posterior-stabilized, rotating platform knee prosthesis design was aimed to decrease polyethylene wear for the sake of improving implant survivorship. The purpose of the present prospective study was to evaluate the long-term clinical and radiographic results as well as the survival rate after using a rotating platform, posterior-stabilized knee prosthesis at a minimum of 10 years at a Middle East institution. We compared the results with reports in the literature on western populations. From January 2002 to June 2008, 96 patients (106 knees) underwent total knee arthroplasty (TKA) using a cemented rotating platform posterior-stabilized knee prosthesis. At a mean of 11.5 ± 1.3 years, 85 patients (95 TKAs) were available for clinical, radiographic, and implant survival analysis. At the final follow-up, 78.9% of the patients had excellent Knee Society Scoring system score, the average knee flexion was 110 ± 17 degrees, the average anatomical knee coronal alignment was 186 ± 2 degrees and 187 ± 3 degrees for varus and valgus knees, respectively. Five (5.2%) knees were revised of these: two for bearing dislocation, two for aseptic loosening, and one for infection. The Kaplan-Meier survival rate was 94.7% for all revisions and 97.8% when only revision for aseptic loosening considered as the end point. At a long-term follow-up, reasonable clinical and radiographic outcomes had been achieved after using a rotating platform, posterior-stabilized knee prosthesis in our population with acceptable survival rate reaching up to 95%, which is comparable to reports from the western population.

Morphometric measurement of the proximal tibia to design the tibial component of total knee arthroplasty for the Thai population

Purpose

This study evaluates the morphology of the Thai proximal tibia based on three-dimensional (3D) models to design the tibial component.

Methods

The 3D models of 480 tibias were created using reverse engineering techniques from computed tomography imaging data obtained from 240 volunteers (120 males, 120 females; range 20–50 years). Based on 3D measurements, a digital ruler was used to measure the distance between the triangular points of the models. The morphometric parameters consisted of mediolateral length (ML), anteroposterior width (AP), medial anteroposterior width (MAP), lateral anteroposterior width (LAP), central to a medial length (CM), central to a lateral length (CL), medial anterior radius (MAR), lateral anterior radius (LAR), and tibial aspect ratio (AR). An independent t-test was performed for gender differences, and K-means clustering was used to find the optimum sizes of the tibial component with a correlation between ML length and AP width in Thai people.

Results

The average morphometric parameters of Thai proximal tibia, namely ML, AP, MAP, LAP, CM, and CL, were as follows: 72.52 ± 5.94 mm, 46.36 ± 3.84 mm, 49.22 ± 3.62 mm, 43.59 ± 4.05 mm, 14.29 ± 2.72 mm, and 15.28 ± 2.99 mm, respectively. The average of MAR, LAR, and AR was 24.43 ± 2.11 mm, 21.52 ± 2.00 mm, and 1.57 ± 0.08, respectively. All morphometric parameters in males were significantly higher than those of females. There was a difference between the Thai proximal tibia and other nationalities and a mismatch between the size of the commercial tibial component and the Thai knee. Using K-means clustering analysis, the recommended number of ML and AP is seven sizes for the practical design of tibial components to cover the Thai anatomy.

Conclusion

The design of the tibial component should be recommended to cover the anatomy of the Thai population. These data provide essential information for the specific design of Thai knee prostheses.

Risk Factors for Patellar Clunk or Crepitation after Primary Total Knee Arthroplasty: A Systematic Review and Meta-analysis

Patellar clunk and crepitation (PCC) have been reported as a consequence of primary total knee arthroplasty (TKA). The incidence and contributing factors have not been fully defined. We performed this systematic review to evaluate factors associated with PCC following primary TKA. We identified studies on PCC following TKA from an electronic search of articles in Medline, Embase and the Cochrane databases (dated up to May 2018). Eighteen studies altogether, including 600 cases of PCC within 8,131 TKAs, were included in the meta-analysis. Several factors including demographic, intraoperative, clinical variables, and radiographic measurements were pooled for meta-analysis. Among intraoperative and clinical variables, patients involved with patellar retention (odds ratio [OR] = 9.420; confidence interval [CI]: 5.770-13.070), lateral reticular release (OR = 2.818; CI: 1.114-7.125), and previous surgery (OR = 2.724; CI: 1.549-4.790) were more likely to having PCCs. Among radiographic measurements, increased anterior tibial offset (weighted mean difference [WMD] = 0.387; CI: 0.139-0.634), increased joint line changes (WMD = 1.325; CI: 0.595-2.055), and increased knee flexion angle (WMD = 3.592; CI: 1.811-5.374) were considered risk factors associated with PCC. Demographic factors (age, gender, body mass index [BMI], and diagnosis) and other reported radiographic measurements were not associated with PCCs. This study identified intraoperative variables (patellar retention and lateral reticular release), clinical variables (previous surgery), and radiographic measurements (increased anterior tibial offset, increased joint line changes, and increased postoperative knee flexion angle) that contribute to an increased risk for PCC. Modifiable factors (patellar retention and lateral reticular release) should be considered and addressed to limit the risk for PCC following TKA. Patients with conditions that may not be modifiable may benefit from counseling about their increased risks for PCC to limit potential dissatisfaction with their procedure.

Ten- to 14-Year Results of a High-Flex Rotating Platform Knee Implant: A Follow-Up Report of a Prospective Cohort

BACKGROUND

High-flex posterior stabilised rotating platform (PSRP) implant was introduced to provide for deep knee flexion. Few short-term results have been reported, but there are no long-term outcomes reported.

METHODS

We prospectively followed 48 patients (53 knees) implanted with one such design. Inclusion criteria for implantation were patients with good pre-operative flexion and wishing to perform activities requiring deep knee flexion post-operatively, with femorotibial varus angle < 15° and having good flexion stability at trialling stage. Previously, we reported their outcomes at 2-6 years (FU-1). We now report their functional and radiological results at a minimum follow-up of 10 years (FU-2) in 39 patients (43 knees); 5 patients having died and 4 lost to follow-up.

RESULTS

The mean pre-operative flexion of 124° improved to 130° at FU-1 and to 134° at FU-2. Flexion of 130° or more was seen in 59.6% knees at FU-1 and 74.42% knees at FU-2. At FU-2 mean Knee score was 90.5 and Function score was 67.8. Incidence of patellofemoral symptoms increased from 7.7% at FU-1 to 11.36% at FU-2. There were no cases of bearing spin out, osteolysis or revision surgeries.

CONCLUSION

At a minimum 10-year follow-up, high-flexion PSRP design in selected patients yielded 100% survival. We recorded good knee flexion and knee society scores, with no case of spin out, implant loosening, osteolysis or revision surgery. Although deep knee flexion improved at longer follow-up, its use in ADL had reduced due to other age-related factors. There was increased incidence of patellofemoral symptoms.

Unexpected high rate of revision of a modern cemented fixed bearing modular posterior-stabilized knee arthroplasty

AIMS

To establish our early clinical results of a new total knee arthroplasty (TKA) tibial component introduced in 2013 and compare it to other designs in use at our hospital during the same period.

METHODS

This is a retrospective study of 166 (154 patients) consecutive cemented, fixed bearing, posterior-stabilized (PS) TKAs (ATTUNE) at one hospital performed by five surgeons. These were compared with a reference cohort of 511 knees (470 patients) of other designs (seven manufacturers) performed at the same hospital by the same surgeons. There were no significant differences in age, sex, BMI, or follow-up times between the two cohorts. The primary outcome was revision performed or pending.

RESULTS

In total, 19 (11.5%) ATTUNE study TKAs have been revised at a mean 30.3 months (SD 15), and loosening of the tibial component was seen in 17 of these (90%). Revision is pending in 12 (7%) knees. There was no difference between the 31 knees revised or with revision pending and the remaining 135 study knees in terms of patient characteristics, type of bone cement (p = 0.988), or individual surgeon (p = 0.550). In the reference cohort, there were significantly fewer knees revised (n = 13, 2.6%) and with revision pending (n = 8, 1.5%) (both p < 0.001), and only two had loosening of the tibial component as the reason for revision.

CONCLUSION

This new TKA design had an unexpectedly high early rate of revision compared with our reference cohort of TKAs. Debonding of the tibial component was the most common reason for failure. Additional longer-term follow-up studies of this specific component and techniques for implantation are warranted. The version of the ATTUNE tibial component implanted in this study has undergone modifications by the manufacturer. Cite this article: Bone Joint J 2021;103-B(6 Supple A):137-144.

Utility and Prognostic Ability of a Diagnostic Injection Before Revision Total Knee Arthroplasty

BACKGROUND

Diagnostic injections are commonly utilized in the workup of painful total knee arthroplasties (TKA), particularly when the diagnosis remains unclear. However, current literature provides limited evidence regarding the utility and prognostic capability of anesthetic injections in this scenario. This study sought to establish the role of diagnostic injections in predicting successful revision TKA.

METHODS

A retrospective review was conducted on 144 consecutive aseptic revision TKAs receiving diagnostic anesthetic injections. Instability (57.6%) and aseptic loosening (33.3%) comprised most revision etiologies. Patient-reported percentage pain relief after the injection was statistically correlated with KOOS JR, Knee Society Score, UCLA Activity Level, and satisfaction scores.

RESULTS

About 74.3% (107/144) of revision TKAs reported >50% pain relief after injection. There were no differences in pain relief based on revision indication (P = .841). Improvement from preoperative activity level was greater in the >50% pain relief group (P = .024). Four-month patient satisfaction did not differ between patients who reported >50% and ≤50% pain relief (67% vs. 66%, P = .130). About 64% of patients who reported >50% pain relief were satisfied at minimum 1-year follow-up, compared with only 47% of those who reported ≤50% pain relief after diagnostic injection (P < .001).

CONCLUSION

Study results show that patients reporting >50% pain relief after diagnostic injection have improvements in activity level and maintain greater satisfaction at minimum 1-year than those reporting ≤50% pain relief. Expectations for improvement after revision TKA should be tempered if diagnostic anesthetic injection yields minimal subjective pain relief.

Clinical, Functional, and Midterm Survival Analysis on Sigma Curved Plus Ultracongruent Polyethylene Insert in Primary Total Knee Arthroplasty: A Retrospective Study

BACKGROUND

Posterior-stabilized (PS) total knee arthroplasty (TKA) poses problems such as the need for intercondylar notch bone resection as well as cam and post wear and patella clunk. Owing to its heightened anterior profile, an ultracongruent polyethylene insert prevents the excessive posterior translation of tibia in the case of a deficient or scarified posterior cruciate ligament (PCL). This study aimed to determine whether an ultracongruent insert provides satisfactory clinical and functional outcomes and midterm survival benefits.

METHODS

Based on the reviewed medical records of 200 patients, 240 primary TKA cases involving the use of Sigma Curved Plus (DePuy International, Ltd., Leeds, UK) ultracongruent insert were retrospectively enrolled in this study. Follow-up data were used to evaluate the clinical and radiological outcomes and to conduct a Kaplan-Meier survival analysis.

RESULTS

The mean follow-up duration for 224 knees was 5.8 years (range 5-6.5 years). A revision was made due to infection in two patients and due to periprosthetic fractures in two other patients. The mean knee flexion improved from 101.97° ± 9.43° (range 85°-125°) to 125.75° ± 9.58° (range 100°-140°) at the final follow-up. The mean Knee Society score improved from 43.1 ± 9.76 to 88.3 ± 3.2, and the function score improved from 44.95 ± 7.26 to 90.16 ± 3.71. None of the patients showed radiographic loosening of either insert component, but 22 (5%) patients showed radiolucent lines (<2 mm). The Kaplan-Meier analysis showed that the five-year survival of the insert with an endpoint of revision for any reason was 98.1% (confidence interval, CI, 95.7-99.6%).

CONCLUSION

The Sigma Curved Plus insert showed a low failure rate with good clinical, functional, and midterm survival outcomes in comparison to standard outcomes reported in earlier studies. Further follow-up studies are warranted to determine whether the insert's performance is maintained in the long term.

Complex Regional Pain Syndrome Following Total Knee Arthroplasty

Complex regional pain syndrome (CRPS) is an uncommon cause of residual pain after total knee arthroplasty (TKA). The presentation is variable, and there is no gold standard diagnostic test. Diagnosis is more difficult after TKA because some classic signs of CRPS may be unreliable and imaging may be difficult to interpret. Early intervention is the most important factor in predicting improvement, necessitating high suspicion in patients with exaggerated pain and stiffness after excluding more common causes. This article reviews the literature regarding CRPS following TKA, explains the diagnosis, and discusses treatment. [Orthopedics. 2020;43(6):e486-e491.].

Comparison of Posterior Cruciate-Retaining and High-Flexion Cruciate-Retaining Total Knee Arthroplasty Design

BACKGROUND

High-flexion prostheses have been developed to achieve deep flexion after total knee arthroplasty. The purpose of this study is to compare standard NexGen (CR, cruciate-retaining) and high-flexion NexGen (CR-flex) total knee prostheses in terms of range of motion, clinical and radiologic outcomes, rates of complications, and survivorship in long-term follow-up.

METHODS

From January 2000 to December 2008, 423 consecutive knees underwent total knee arthroplasty using standard CR or CR-flex prostheses. Fifty-three patients were lost to follow-up or declined to participate and 54 died, leaving 290 knees. The minimum duration of follow-up was 8 years (mean 10.1 years). Physical examination and knee scoring of patients were assessed preoperatively, at 6 months and 1 year after surgery, and annually thereafter. Supine anteroposterior and lateral radiographs and standing anteroposterior hip-to-ankle radiographs were obtained preoperatively and at each follow-up.

RESULTS

Mean postoperative range of motions in the standard CR group and the CR-flex group were similar, showing no significant difference between the 2 groups (P = .853). At the time of the final follow-up, mean total Hospital for Special Surgery scores were similar between the 2 groups (P = .118). Mean Knee Society pain (P = .325) and function scores (P = .659) were also comparable between the 2 groups. Western Ontario and McMaster Universities Osteoarthritis Index score showed no intergroup difference either (P = .586). The mean hip-knee-ankle angle at the final follow-up was approximately the same (P = .940). Mean coronal angles of femoral and tibial component at final follow-up were also similar (P = .211 and P = .764, respectively). The prevalence of the radiolucent line was 0.6% in the standard CR group and 0.9% in the CR-flex group. Estimated survival rate according to Kaplan-Meier survival analysis was 97.2% in the standard CR group and 95.6% in the CR-flex group at mean follow-up of 10.1 years.

CONCLUSION

This study suggests that excellent clinical and radiographic outcomes could be achieved with both standard and high-flexion CR total knee designs. High-flexion CR prosthesis did not show any advantages over the standard design.

Prediction of wear performance in femoral and tibial conformity in patient-specific cruciate-retaining total knee arthroplasty

BACKGROUND

Articular surface curvature design is important in tibiofemoral kinematics and the contact mechanics of total knee arthroplasty (TKA). Thus far, the effects of articular surface curvature have not been adequately discussed with respect to conforming, nonconforming, and medial pivot designs in patient-specific TKA. Therefore, this study evaluates the underlying relationship between the articular surface curvature geometry and the wear performance in patient-specific TKA.

METHODS

We compare the wear performances between conventional and patient-specific TKA under gait loading conditions using a computational simulation. Patient-specific TKAs investigated in the study are categorized into patient-specific TKA with conforming articular surfaces, medial pivot patient-specific TKA, and bio-mimetic patient-specific TKA with a patient's own tibial and femoral anatomy. The geometries of the femoral components in patient-specific TKAs are identical.

RESULTS

The anterior-posterior and internal-external kinematics change with respect to different TKA designs. Moreover, the contact pressure and area did not directly affect the wear performance. In particular, conforming patient-specific TKAs exhibit the highest volumetric wear and wear rate. The volumetric wear in a conforming patient-specific TKA is 29% greater than that in a medial pivot patient-specific TKA.

CONCLUSION

The findings in this study highlight that conformity changes in the femoral and tibial inserts influence the wear performance in patient-specific TKA. Kinematics and contact parameters should be considered to improve wear performance in patient-specific TKA. The conformity modification in the tibiofemoral joint changes the kinematics and contact parameters, and this affects wear performance.

Minimum twelve-year follow-up of fixed- vs mobile-bearing total knee arthroplasty: Double blinded randomized trial

BACKGROUND

Total knee arthroplasty (TKA) with fixed-bearing (FB) implants have demonstrated impressive functional results and survival rates. Meanwhile, rotating-platform (RP) constructs have biomechanically shown to reduce polyethylene wear, lower the risk of component loosening, and better replicate anatomic knee motion. There is growing question of the clinical impact these design changes have long-term.Questions/purposes: The aim of this double-blinded prospective randomized trial was to compare function and implant survival in patients who received either FB or RP press-fit condylar Sigma (PFC Sigma, DePuy, Warsaw, IN) total knee replacements at a minimum follow-up of twelve years.

PATIENTS AND METHODS

Patient reported outcome measures used included the functional Knee Society Score, Western Ontario and McMaster University Osteoarthritis Index (WOMAC) scores, Medical Outcomes Short Form-36 (SF-36) score, and satisfaction assessment on a four-point Likert scale. The data was collected from times preoperative, two-years, and final encounter (mean 13.95 years). A total of 28 RP and 19 FB knees (58.8%) were analyzed at the final follow-up.

RESULTS

Among all patients, KSS and WOMAC scores statistically improved from pre-op to 2-year, while KSS statistically worsened from 2-year to final follow-up. The RP group averaged better follow-up scores in all assessments at the final follow-up with exception of overall satisfaction. There was no statistically significant difference in the functional Knee Society Score, Short Form-36, WOMAC scores, patient satisfaction or implant survival between the two groups at any measured period.

CONCLUSIONS

The use of a fixed-bearing or rotating-platform design does not convey significant superiority in terms of function or implant longevity at a minimum twelve years after total knee arthroplasty.

LEVEL OF EVIDENCE

Level I, Experimental study, randomized controlled trial (RCT).

Arthrofibrosis After Total Knee Arthroplasty: Pathophysiology, Diagnosis, and Management

Arthrofibrosis is the pathologic stiffening of a joint caused by an exaggerated inflammatory response. As a common complication following total knee arthroplasty (TKA), this benign-appearing connective tissue hyperplasia can cause significant disability among patients because the concomitant knee pain and restricted range of motion severely hinder postoperative rehabilitation, clinical outcomes, and basic activities of daily living. The most effective management for arthrofibrosis in the setting of TKA is prevention, including preoperative patient education programs, aggressive postoperative physical therapy regimens, and anti-inflammatory medications. Operative treatments include manipulation under anesthesia, arthroscopic debridement, and quadricepsplasty.

Effect of Post-Cam Design for Normal Knee Joint Kinematic, Ligament, and Quadriceps Force in Patient-Specific Posterior-Stabilized Total Knee Arthroplasty by Using Finite Element Analysis

The purpose of this study is to investigate post-cam design via finite element analysis to evaluate the most normal-like knee mechanics. We developed five different three-dimensional computational models of customized posterior-stabilized (PS) total knee arthroplasty (TKA) involving identical surfaces with the exception of the post-cam geometry. They include flat-and-flat, curve-and-curve (concave), curve-and-curve (concave and convex), helical, and asymmetrical post-cam designs. We compared the kinematics, collateral ligament force, and quadriceps force in the customized PS-TKA with five different post-cam designs and conventional PS-TKA to those of a normal knee under deep-knee-bend conditions. The results indicated that femoral rollback in curve-and-curve (concave) post-cam design exhibited the most normal-like knee kinematics, although the internal rotation was the closest to that of a normal knee in the helical post-cam design. The curve-and-curve (concave) post-cam design showed a femoral rollback of 4.4 mm less than the normal knee, and the helical post-cam design showed an internal rotation of 5.6° less than the normal knee. Lateral collateral ligament and quadriceps forces in curve-and-curve (concave) post-cam design, and medial collateral ligament forces in helical post-cam design were the closest to that of a normal knee. The curve-and-curve (concave) post-cam design showed 20% greater lateral collateral ligament force than normal knee, and helical post-cam design showed medial collateral ligament force 14% greater than normal knee. The results revealed the variation in each design that provided the most normal-like biomechanical effect. The present biomechanical data are expected to provide useful information to improve post-cam design to restore normal-like knee mechanics in customized PS-TKA.

Using a Tibial Short Extension Stem Reduces Tibial Component Loosening After Primary Total Knee Arthroplasty in Severely Varus Knees: Long-term Survival Analysis With Propensity Score Matching

BACKGROUND

Patients with severe preoperative varus deformity have been reported to have high rates of loosening after total knee arthroplasty (TKA), primarily on the tibial side. This study investigated whether a short extension stem for the tibial component in severely varus knees would reduce the failure rate due to loosening on the tibial side.

METHODS

Patients who underwent TKA, performed by a single surgeon using a single implant between November 1998 and January 2009, were retrospectively evaluated. Patients diagnosed with primary osteoarthritis, having a hip-knee-ankle axis greater than varus 8° on preoperative long-film radiographs, and postoperatively followed up for more than 2 years were included. Patients were divided into "stem" and "nonstem" groups, followed by 1:1 propensity score matching according to age, gender, body mass index, preoperative mechanical axis, and postoperative alignment. Tibial loosening rates in the 2 groups were compared.

RESULTS

The study cohort included 602 patients, divided into "stem" and "nonstem" groups. Propensity score matching yielded 88 pairs of patients. Mean follow-up duration was similar in the stem and nonstem groups (109.22 vs 103.81 months, P = .451). None of the patients in the stem group, compared with 5 in the nonstem group, experienced aseptic loosening. The overall implant survival rate was significantly higher in the stem group than in the nonstem group (P = .0201).

CONCLUSION

Using a short extension stem for the tibial component in primary TKA in patients with severe varus deformity greater than 8° may reduce the rate of loosening of the tibial side and increase the longevity of the implant.

LEVEL OF EVIDENCE

Level III.

Mobility of the rotating platform in low contact stress knee arthroplasty is durable

PURPOSE

The mobile bearing or rotating platform (RP) in total knee arthroplasty (TKA) is originally part of a low contact stress (LCS) concept, with bearing undersurface mobility compensating higher bearing upper-surface congruency. The in vivo range of axial femorotibial rotation in RP knees has been the subject of many studies, but always involving the performance of relatively low demanding task conditions. Hardly any study has addressed the maintenance of this rotation over time.

METHODS

Two consecutive series of patients with LCS RP knees were studied in a cross-sectional study of 1- and 5-year follow-up. They were assessed using optoelectronic movement analysis during gait and the performance of a sit-to-walk (STW) task with and without turning steps.

RESULTS

A mean range of rotation (SD) was found in the 1-year group of 13.4° (3.7) during gait, 17.8° (6.8) during STW straight, and 17.9° (6.9) during STW with turning. The range in the 5-year group was 11.2° (6.0) during gait, 18.5° (8.7) during STW straight, and 18.3° (8.3) during STW with turning. A so-called paradoxical axial rotation pattern during gait and STW straight occurred in both groups in a normal prevalence.

CONCLUSION

The amount and pattern of rotation in a LCS RP knee does not become impaired between 1 and 5 years postoperatively. The theoretical benefit of RP TKA has not been proven in any clinical study so far, and studies with suitable long-term follow-up need to prove whether this mobility also leads to improved prosthesis survival. However, our findings support the functioning of the rotating platform at a basal science level and illustrate the need for the use of more complex tasks in kinematic studies.

LEVEL OF EVIDENCE

Therapeutic study, Level III.

Ten- to 13-Year Results of Mobile Bearing Posterior-Stabilized Rotating-Platform Knee Implants, Reported by Nondesigner Surgeon

BACKGROUND

Posterior-stabilized rotating-platform (PSRP) knee was designed with the purpose of improving postoperative flexion and stability. Its long-term performance has limited reports, which could show whether this purpose has been realized without deleterious effect. We report its long-term results at 10-13 years, of a previously studied cohort, evaluated longitudinally.

METHODS

A total of 133 consecutive PSRP implants, selected for 118 patients were studied. Twenty-one patients (24 knees) were deceased and 11 patients (12 knees) were lost to follow-up after 10 years. Eighty patients (97 knees) completed clinical evaluation, of whom 78 patients (88 knees) also completed radiological evaluation.

RESULTS

Mean flexion improved from 106.8° (30°-150°) to 127° (90°-155°). Forty-three percent patients could sit crosslegged, 32.5% could sit on floor, and 3.4% could squat. Mean knee subscore of Knee Society Score improved from 28 (1-59) to 96 (67-100). Mean function subscore improved from 53 (5-81) to 78 (-10 to 100). After 10 years, 5 patients had zero function score because of developing other debilitating medical illnesses. Twenty-one dead patients (24 knees), at their last follow-up (7.7 years), had satisfactory scores. No patient had spinout or revision. Radiologically, alignment was satisfactory and there was no osteolysis. Kaplan-Meier analysis showed 100% implant survival.

CONCLUSION

PSRP design, evaluated after 10 years of implantation in selected patients, had 100% survival with good flexion. Addition of post and cam to the original rotating platform design has provided good stability without untoward effects of wear or osteolysis at 10-13 years.

Clinical and Radiographic Results of Attune and PFC Sigma Knee Designs at 2-Year Follow-Up: A Prospective Matched-Pair Analysis

BACKGROUND

Anterior knee pain (AKP) and/or crepitation are important causes of dissatisfaction after total knee arthroplasty (TKA). Aim of this prospective, matched-pair study was to compare 2 different designs of patellofemoral (ie, trochlear groove) TKA. The Attune knee has an anatomic trochlear groove with a medialized dome patellar component vs the PFC Sigma with a single radius trochlear groove with a domed shaped patella.

METHODS

Between January 2010 and December 2014, 100 consecutive Attune TKAs were matched to 100 PFC Sigma TKAs based on age, gender, side, and body mass index. All surgeries were performed via medial parapatellar approach and used cemented, posterior-stabilized implants with patellar resurfacing. Clinical evaluations were assessed using Knee Society Scores (KSS) and a patient-administered questionnaire at 2-year follow-up (range, 1.5-3 years).

RESULTS

Based on the KSS clinical rating system, excellent clinical results were achieved in 89.4% and 90.7% of Attune and PFC Sigma TKAs, respectively. There were no significant differences in the KS pain or function scores. The overall incidence of AKP was significantly lower with the Attune knee compared to that of the PFC Sigma (12.5% vs 25.8%; P = .02). The incidence of hearing or feeling noise was also less with the Attune knee (17.7% vs 30.9%; P = .02). The incidence of painful crepitation was low in both groups (1.0% vs 4.1%) with no significant difference between groups (P = .37). Both groups had similar high satisfaction scores of 8.6 and 8.4 for the Attune and PFC groups, respectively (P = .09).

CONCLUSION

At 2-year follow-up, there were no differences between the PFC Sigma and Attune knees in KSS or satisfaction. However, the Attune group had a lesser incidence of AKP and crepitation. Further studies should focus on AKP and noise in cruciate-retaining knees.

Effects of measurement methods for tibial rotation axis on the morphometry in Korean populations by gender

BACKGROUND

There have been arguments for methodology in tibial rotation axis measurement, which accordingly determines the morphometry of the proximal tibia in total knee arthroplasty. The morphometry of the proximal tibia for the Korean population is determined by gender, based on the anatomical tibial axis and reliable rotational orientation in knee replacements, to evaluate the size suitability of the currently available prostheses in Korea.

METHODS

This study reconstructed the MRI images in three-dimensions for identification and measurement of the mediolateral (ML) and anteroposterior (AP) lengths of the proximal tibia and the tibial aspect ratio (ML/AP) using proximal tibial anthropometric data for 700 osteoarthritic knees (587 females and 113 males). The ML and AP lengths were measured using tibial rotation axis techniques based on the medial one-third tibial tubercle and Cobb's method.

RESULTS

Significant differences (P<0.05) in ML, medial anteroposterior (MAP), lateral anteroposterior (LAP) lengths, and aspect ratio (ML/LAP) were observed for males and females with respect to different measurement techniques for the tibial rotation axis. However, the measured aspect ratio (ML/MAP) of tibiae for the Korean population did not show significance. The measured aspect ratio (ML/AP) ratio of tibiae for the Korean population was higher than that of currently available tibial components.

CONCLUSIONS

Results from this study can guide development of gender-specific tibial prosthesis designs with different ML and AP aspect ratios based on the tibial anatomical rotation axis for the Korean population.

Diagnostic Algorithm for Residual Pain After Total Knee Arthroplasty

Although total knee arthroplasty is a successful and cost-effective procedure, patient dissatisfaction remains as high as 50%. Postoperative residual knee pain after total knee arthroplasty, with or without crepitation, is a major factor that contributes to patient dissatisfaction. The most common location for residual pain after total knee arthroplasty is anteriorly. Because residual pain has been associated with an un-resurfaced patella, this review includes only registry data and total knee arthroplasty with patella replacement. Some suggest that the pathogenesis of residual knee pain may be related to mechanical stimuli that activate free nerve endings around the patellofemoral joint. Various etiologies have been implicated in residual pain, including (1) low-grade infection, (2) midflexion instability, and (3) component malalignment with patellar maltracking. Less common causes include (4) crepitation and patellar clunk syndrome; (5) patellofemoral symptoms, including overstuffing and avascular necrosis of the patella; (6) early aseptic loosening; (7) hypersensitivity to metal or cement; (8) complex regional pain syndrome; and (9) pseudoaneurysm. Because all of these conditions can lead to residual pain, identifying the etiology can be a difficult diagnostic challenge. Often, patients with persistent pain and normal findings on radiographs and laboratory workup may benefit from a diagnostic injection or further imaging. However, up to 10% to 15% of patients with residual pain may have unexplained pain. This literature review summarizes the findings on the causes of residual pain and presents a diagnostic algorithm to facilitate an accurate diagnosis for residual pain after total knee arthroplasty.

Patients who underwent total hip or knee arthroplasty are more physically active than the general Dutch population

Total hip arthroplasty (THA) and total knee arthroplasty (TKA) bring relief of pain and functional disability to patients with end-stage osteoarthritis, and however, the literature on their impact on patients' level of physical activity (PA) is scarce. Cross-sectional study in patients who underwent THA/TKA surgery in the preceding 6-22 months and a random sample of persons aged >40 years from the Dutch general population, participating in a national survey. PA in minutes per week (min/week) and adherence to the Dutch recommendation for PA (NNGB yes/no) were measured by the short questionnaire to assess health-enhancing PA. Multivariable linear (total min/week) and logistic regression analyses (meeting recommendations PA), adjusting for confounders, were performed for THA and TKA separately. In total, 258 THA [62.3% female, aged 69.4 (9.1)] and 221 TKA [65.7% female, aged 69.5 (8.9)] patients and 4373 persons from the Dutch general population [51.4% female, aged 58.9 (11.6)] were included. The presence of THA was associated after adjusting for age, sex, BMI education and musculoskeletal comorbidities, with more total min/week spent on PA (THA 13.8% increase, 95% CI 1.6-27.6%), whilst both TJA groups were associated with adhering to NNGB (THA: OR 1.79, 95% CI 1.26-2.56; TKA: OR 1.73, 95% CI 1.20-2.51). As this study used questionnaires to compare the PA of THA/TKA patients to the general population, some recall and selection bias might have been induced. After surgery, overall, TJA patients are more likely to adhere NNGB than a representative sample of persons >40 years from the Dutch general population.

Comparison of ultra-congruent mobile- and fixed-bearing navigation-assisted total knee arthroplasty with minimum 5-year follow-up

PURPOSE

The purpose of this study was to compare the midterm outcomes between fixed and mobile ultra-congruent (UC) bearings in total knee arthroplasty (TKA).

METHODS

This is a retrospective matched-pairs case-control study of patients who underwent primary navigation-assisted TKA with a minimum 5-year follow-up. A total of 182 cases involved the fixed UC bearing system as Group 1 and 101 cases involved mobile UC bearing system group as Group 2. After 1:1 matching, 73 knees in each group were enrolled. Clinical and radiographic outcomes were evaluated.

RESULTS

The overall survival was 143 of 146 cases (97.9 %) at final follow-up, and 72 of 73 cases (96.3 %) in Group 1 and 71 of 73 cases (95.8 %) in Group 2 at final follow-up based on an endpoint of revision surgery. The reasons of revision TKA were periprosthetic fracture in Group 1, infection and bearing dislocation in Group 2. There was no statistical difference in Hospital for Special Surgery (HSS) scores, Knee Society Scores (KSS), WOMAC index score evaluations between groups.

CONCLUSIONS

This study demonstrated that the fixed-bearing UC prosthesis could provide satisfactory performance compared with that of the mobile-bearing UC prosthesis with minimum 5-year follow-up. The fixed-bearing UC prosthesis could be considered in navigation-assisted TKA with theoretical advantages of UC design.

LEVEL OF EVIDENCE

IV.

No Differences Identified in Transverse Plane Biomechanics Between Medial Pivot and Rotating Platform Total Knee Implant Designs

BACKGROUND

Total knee arthroplasties (TKAs) using well-designed, fixed bearing prostheses, such as medial pivot (MP), have produced good long-term results. Rotating-platform, posterior-stabilized (RP-PS) mobile bearing implants were designed to decrease polyethylene wear. Sagittal and coronal plane TKA biomechanics are well examined and correlated to polyethylene wear. However, limited research findings describe this relationship in transverse plane. We assumed that although axial plane biomechanics might not be the most destructive parameters on polyethylene wear, it is important to clarify their role because both joint kinematics and kinetics in all 3 planes are important input parameters for TKA wear testing (International Organization for Standardization 14243-1 and 14343-3). Our hypothesis was that transverse plane overall range of motion (ROM) and/or peak moment show differences that reflect on wear advantages when compared RP-PS implants to MP designs.

METHODS

Two groups (MPs = 24 and RP-PSs = 22 subjects) were examined by using 3D gait analysis. The variables were total internal-external rotation (IER) ROM and peak IER moments.

RESULTS

No statistically significant difference was demonstrated between the 2 groups in kinetics (P = .389) or kinematics (P = .275).

CONCLUSION

In the present study, no wear advantages were found between 2 TKAs. Both designs showed identical kinetics at the transverse plane in level-ground walking. Kinematic analysis could not illustrate any statistically significant difference in terms of overall IER ROM. Nevertheless, kinematic gait pattern differences observed possibly reflect different patterns of joint surface motion or abnormal gait patterns. Thus, wear testing with various input waveforms combined with functional data analysis will be necessary to identify the actual effects of gait variability on polyethylene wear.

What are the important manoeuvres for beginners to minimize surgical time in primary total knee arthroplasty?

PURPOSE

It was hypothesized that surgical time of beginners would be much longer than that of experts. Our purpose was to investigate and clarify the important manoeuvres for beginners to minimize surgical time in primary total knee arthroplasty (TKA) as a multicentre study.

METHODS

A total of 300 knees in 248 patients (averaged 74.6 years) were enrolled. All TKAs were done using the same instruments and the same measured resection technique at 14 facilities by 25 orthopaedic surgeons. Surgeons were divided into three surgeon groups (four experts, nine medium-volume surgeons and 12 beginners). The surgical technique was divided into five phases. Detailed surgical time and ratio of the time in each phase to overall surgical time were recorded and compared among the groups in each phase. A total of 62, 119, and 119 TKAs were done by beginners, medium-volume surgeons, and experts, respectively.

RESULTS

Significant differences in surgical time among the groups were seen in each phase. Concerning the ratio of the time, experts and medium-volume surgeons seemed cautious in fixation of the permanent component compared to other phases. Interestingly, even in ratio, beginners and medium-volume surgeons took more time in exposure of soft tissue compared to experts. (0.14 in beginners, 0.13 in medium-volume surgeons, 0.11 in experts, P < 0.05).

CONCLUSION

Beginners took more time in exposure and closure of soft tissue compared to experts. Improvement in basic technique is essential to minimize surgical time among beginners. First of all, surgical instructors should teach basic techniques in primary TKA for beginners.

LEVEL OF EVIDENCE

Therapeutic studies, Level IV.

Posterior Shift of Contact Point between Femoral Component and Polyethylene in the LCS Rotating Platform Implant under Weight Bearing Condition

Purpose

To analyze the contact mechanics of the femoral component and polyethylene of the Low Contact Stress rotating platform (LCS-RP) in nonweight bearing and weight bearing conditions using full flexion lateral radiographs.

Materials and Methods

From May 2009 to December 2013, 58 knees in 41 patients diagnosed with osteoarthritis and treated with total knee arthroplasty (TKA) were included in this study. TKA was performed using an LCS-RP knee prosthesis. Full flexion lateral radiographs in both weight bearing and nonweight bearing condition were taken at least one month postoperatively (average, 28.8 months). Translation of femoral component was determined by the contact point between the femoral component and polyethylene. Maximum flexion was measured as the angle between the lines drawn at the midpoint of the femur and tibia.

Results

Posterior shift of the contact point in LCS-RP TKA was observed under weight bearing condition, which resulted in deeper flexion compared to LCS-RP TKA under nonweight bearing condition.

Conclusions

In the LCS-RP TKA, the contact point between the femoral component and polyethylene moved posteriorly under weight bearing condition, and the joint was more congruent and maximum flexion increased with weight bearing.

Patient-Specific Total Knees Demonstrate a Higher Manipulation Rate Compared to "Off-the-Shelf Implants"

Patient-specific total knee replacements have been designed in hopes of providing better functional outcomes compared to "off-the-shelf" implants in primary total knee arthroplasty (TKA). We prospectively evaluated manipulation rates and clinical outcomes of 21 patient-specific TKAs matched with 42 posterior-stabilized and 11 cruciate-retaining "off-the-shelf" TKAs. Postoperatively, the patient-specific group had a range of motion significantly less than both control groups (P<0.01). Six of the 21 (28.6%) patient-specific TKAs required manipulation to improve range of motion. No manipulations were reported in either control groups. At minimum two-year follow-up the patient-specific TKAs had similar motion, but worse satisfaction and KSS pain scores. Radiographic analysis provided no insight to the cause of stiffness. Early manipulation is recommended for stiffness with patient-specific TKA.

Midterm survivorship and clinical outcome of INDUS knee prosthesis: 5 year followup study

BACKGROUND

INDUS knee implant has been designed as per the anatomical morphology of the Indian population and has shown good clinical outcome in short term studies. The purpose of the present study was to report the midterm survivorship and clinical outcome of this implant.

MATERIALS AND METHODS

Two hundred and twenty three primary total knee arthroplasties in 209 consecutive patients using the INDUS knee prosthesis were prospectively enrolled. There were 145 females (155 knees) and 64 males (68 knees) with a mean age of 69.95 years (range 42-86 years). Annual followup with clinical and radiological examination was conducted, and a survivorship analysis was done using the Kaplan-Meier analysis.

RESULTS

Mean followup was 5.8 years (range 5-6.5 years). Eleven patients died while eight were lost to followup and a total of 204 knees were available for followup. The mean knee flexion improved from preoperative 110.4° ± 11.24° (range 60°-130°) to 128.17° ± 8.32° (range 100°-140°) at the final followup. The mean knee score improved from 40.1 ± 10.7 to 90.3 ± 5.34 while the function score improved from 44.35 ± 12.9 to 89.58 ± 7.43. Two patient developed infection and required revision. The Kaplan-Meier analysis reported a survivorship of 98.6% (confidence interval 95.7-99.6%) at the end for 5 years for INDUS knee prosthesis.

CONCLUSION

INDUS knee prosthesis has excellent survivorship with a good clinical outcome and low failure rate.

Ten Year Follow-Up of Gap Balanced, Rotating Platform Total Knee Arthroplasty in Patients Under 60 Years of Age

68 patients (91 primary total knee arthroplasties) were evaluated at a mean 10-year, minimum 5 year follow up in patients younger than sixty years of age utilizing the gap balanced, rotating platform design. Follow up assessment included implant survivorship, adverse events, x-rays, Knee Society rating system and clinical evaluation. Three revisions were performed with only one for aseptic loosening at 45 months. Two manipulations were performed in the early postoperative period. Survivorship of the rotating platform, gap balanced knee was 96.7% using surgical revision for any reason and 98.9% using aseptic loosening as endpoints. The rotating platform design using the gap balancing technique in young patients had excellent survivorship at 10-year mean follow up.

What have we learned from 100% success of press fit condylar rotating platform posterior stabilized knees?: A 5-10 years followup by a nondesigner

BACKGROUND

Total joint arthroplasties of the hip and knee represent a remarkable feat of modern medicine in terms of reducing pain and restoring function to millions of patients afflicted with severe arthritis. Oftentimes, the performance and longevity of new implants and devices are based on limited data. This is the first study by a non-designer on the press fit condylar rotating platform posterior stabilized (PFC-RP-PS) design with 100' success. This has a relevance, vis-á -vis bias that one may have in terms of reproducibility of technique and funding from the manufacturer. We associate our excellent mid-term results to intra operative technical aspects and stringent intra operative exclusion criteria.

MATERIALS AND METHODS

Our study includes a cohort of 121 selected knees operated between January 2003 and October 2010. We used cemented, posterior stabilized (PS), mobile bearing (MB), and RP prosthesis from the same manufacturer in all these 121 knees. The patients were evaluated bi-annually with the calculation of their Knee Society Scores (KSS) and a radiological assessment for loosening/osteolysis.

RESULTS

120 knees were available for followup. The average Knee Society clinical and functional scores, respectively, were 27 points and 40 points preoperatively and 93 points and 95 points postoperatively. This indicates a mean increase of about 71' in the clinical score and about 58' in the functional score, which is statistically significant. The mean postoperative flexion was 124°, a mean increase of 23° from the preoperative flexion of 101°. There were no revisions (Kaplan--Meier survivorship of 100').

CONCLUSIONS

We feel durable and reproducible results of PFC-RP-PS design knees are very technique sensitive. The way ahead with the PFC-RP-PS knees looks promising when the exclusion criteria for this design are strictly met. Coming from a non-designer, this study acquires a higher degree of relevance without any designer's or manufacturer's bias.

The difficult primary total knee arthroplasty: a review

Primary total knee arthroplasty (TKA) is a reliable procedure with reproducible long-term results. Nevertheless, there are conditions related to the type of patient or local conditions of the knee that can make it a difficult procedure. The most common scenarios that make it difficult are discussed in this review. These include patients with many previous operations and incisions, and those with severe coronal deformities, genu recurvatum, a stiff knee, extra-articular deformities and those who have previously undergone osteotomy around the knee and those with chronic dislocation of the patella. Each condition is analysed according to the characteristics of the patient, the pre-operative planning and the reported outcomes. When approaching the difficult primary TKA surgeons should use a systematic approach, which begins with the review of the existing literature for each specific clinical situation.

Survivorship at minimum 10-year follow-up of a rotating-platform, mobile-bearing, posterior-stabilised total knee arthroplasty

PURPOSE

To evaluate prospectively the long-term clinical and radiographic results and survivorship of a rotating-platform, posterior-stabilised knee prosthesis at minimum 10 years (mean 11.5 ± 1.41 years), and to test the hypothesis that this design would have a mechanical survivorship greater than 95%.

METHODS

Between 2000 and 2002, 160 consecutive patients (166 knees) underwent total knee arthroplasty using a rotating-platform, posterior-stabilised prosthesis, and clinical and radiographic follow-up data were gathered prospectively.

RESULTS

One hundred and seven patients (112 knees) were available for final follow-up. Five patients (3%) had undergone revision surgery, giving a Kaplan-Meier survival rate of 96.6% for all causes of failure. No spin-out of the polyethylene insert was observed. The mean visual analogue scale, Knee Society and Oxford Knee Scores showed statistically significant improvements (p < 0.001). On radiographs, two cases (2.4%) had radiolucent lines >2 mm, and no patient had osteolysis.

CONCLUSIONS

The absence of osteolysis at minimum 10 years seems to support our hypothesis that this design may be able to reduce peri-prosthetic bone resorption in the long term. The survivorship was greater than 95% and is comparable to the best results reported for this type of knee prosthesis in the literature. The clinical scores are reasonable, given the presence of various disabling concomitant pathologies and the relatively advanced mean age of the study population. This study is clinically relevant because it adds valuable information to the limited data regarding the long-term survivorship and performance of rotating-platform knee prostheses and, more specifically, of a single knee design.

LEVEL OF EVIDENCE

IV.

Functional Results of the ROCC® Mobile Bearing Knee. 602 Cases at Midterm Follow-Up (5 to 14 Years)

We report midterm results of a prospective continuous cohort of ROCC® Total Knee Arthroplasties (TKA). Between 2001 and 2008, all primary TKA patients (n=500) received 602 ROCC saddle-shaped rotating platform TKAs. Mean follow-up was 7.5 years (5-13) (>10 years in 123 knees). 82 patients (93 knees) died; 20 patients (21 knees) were lost to follow-up. Active flexion improved from 119° (10°-150°) to 127° (90°-155°) and Knee Society knee score from 39±11 to 94±9. Two knees were reoperated for aseptic loosening: Kaplan-Meier 14-year survivorship with aseptic loosening as end-point was 99.4% (95% CI, 99.8-100). UCLA mean score increased from 3.8/10 at baseline to 7.3/10 at last FU, 91% recovering pre-disease activity, and 27% with UCLA score ≥8/10. ROCC TKA demonstrated solid midterm survivorship without activity-related complications.

LEVEL OF EVIDENCE

Therapeutic, Level IV.

Survival and functional results after a mean follow-up of 9 years with the Ceragyr® highly congruent mobile-bearing TKA

INTRODUCTION

Fixed-bearing total knee arthroplasty (TKA) implants have excellent long-term survival. Mobile-bearing implants were developed to reduce bone-implant interface stresses and polyethylene insert wear. The primary objective of this study was to analyze the survival rate of a highly congruent mobile-bearing TKA implant (Ceragyr(®)) in patients having a minimum follow-up of 7 years. We hypothesized that the survival rate would be 95-100% at that time point.

PATIENTS AND METHODS

A single-center prospective study included all the patients operated for a primary TKA procedure with a Ceragyr(®) implant between 2000 and 2003. All the implants were cemented. Patellar resurfacing was not carried out systematically, but could be carried out secondarily in cases of persistent anterior knee pain. Clinical and radiological data were collected before the surgery, at 3 months postoperative, at 1 year and then at a minimum follow-up of 7 years. The primary endpoint was the overall revision-free survival rate. Secondary endpoints were the survival without mechanical failure, IKS scores, knee range of motion and implant positioning.

RESULTS

One hundred and thirty-four patients (143 Ceragyr(®) TKA cases) were included; 9 patients (10 TKA) were lost to follow-up (6.7%) and the remaining 125 patients (133 TKA) were contacted. At the final review, 7 of the 133 TKA cases (5.3%) had been revised (6 men, 1 women; P = 0.002), 2 (1.5%) because of mechanical failure and 5 (3.8%) because of an infection. The overall revision-free survival rate was 94.8% [95% CI: 89.3-97.5]; survival was 98.4% [95% CI: 93.8-99.6] with mechanical failure as an endpoint. An in-person assessment was conducted on 76 patients (80 TKA cases) (49 women; 27 men) who had an average age of 70.3 ± 8.4 years at the time of the arthroplasty procedure. The patella had been resurfaced during the initial procedure in 49 cases, and was either not resurfaced or secondarily resurfaced in 31 cases. The average follow-up was 8.7 ± 1.1 years. The IKS score had significantly improved relative to the preoperative values (P < 0.00001). Knee flexion and the IKS knee score remained stable over time (P > 0.05). Patients who underwent patella resurfacing during the initial TKA procedure had better clinical results (P = 0.03).

CONCLUSION

After a minimum follow-up of 7years, the overall revision-free survival rate for the Ceragyr(®) was 94.8%; the survival was 98.4% with mechanical failure as an endpoint. The results were stable over time.

Total knee arthroplasty with mobile tibial weight-bearing: clinical evaluation after a minimum of five years of postoperative follow-up

Objective

To evaluate the medium and long term results from total knee arthroplasty with rotating tibial weight-bearing.

Methods

Between January 2000 and July 2007, 162 patients underwent total knee arthroplasty with mobile tibial weight-bearing. Among these, 96 were evaluated in a previous study with a mean follow-up of 4 years. In the present study, the same group was invited back for reassessment and the results were analyzed. Sixty-nine patients responded to this call (79 knees), and they were evaluated in accordance with the Knee Society Rating System (KSRS), after a mean follow-up of 8 years and 8 months (ranging from 5.5 and 13 years).

Results

A mean KSRS score of 74.41 points was obtained, with good or excellent results.

Conclusion

The medium and long-term results from total knee arthroplasty with mobile tibial weight-bearing were good, and a mean score of 74.41 points in the Knee Society Clinical Rating System was attained.

No difference in clinical and radiologic outcomes after total knee arthroplasty with a new ultra-congruent mobile bearing system and rotating platform mobile bearing systems after minimum 5-year follow-up

We retrospectively compared the clinical and radiographic results between 76 primary total knee arthroplasties (TKAs) using the e.motion Ultra-Congruent prosthesis and 155 primary TKAs using the Low Contact Stress rotating platform. All patients had a minimum 5-year follow-up. Range of motion, Hospital for Special Surgery score, Knee Society Knee Score and Knee Society Functional Score significantly increased in both groups postoperatively, but there was no significant difference between the two groups. The mechanical femorotibial angle improved in both groups postoperatively. Coronal and sagittal component angles were well maintained at the final follow-up. This study demonstrates that a new mobile-bearing prosthesis, designed to be highly congruent with a rotating bearing, could be considered with theoretical advantages and comparable outcomes of established mobile-bearing prostheses.

Electromagnetic navigation in total knee arthroplasty-a single center, randomized, single-blind study comparing the results with conventional techniques

We report on the results of a randomized study (n=200) to compare total knee arthroplasty performed using conventional instrumentation or electromagnetic computer assisted surgical technique. 92% of navigated and 85% of conventional knees were implanted within ±3° from neutral mechanical alignment; there was no statistically significant difference between these proportions. There was also no difference in femoral or tibial rotation assessed by CT scan. At 1year follow up there was no statistical difference between the two groups in American Knee Society Score, Oxford Knee Scores, patient satisfaction, quality of life, hospital length of stay, complication rates or other adverse events. Tourniquet time in the navigated group was longer. Proving value for navigation in total knee arthroplasty surgery remains a challenge.

"Forgotten knee" after total knee replacement: A pragmatic study from a single-centre cohort

OBJECTIVES

After total knee replacement (TKR), some patients find their operated knee totally natural and can be said to have "forgotten" it, while others, although satisfied with their results, remain conscious of their prosthesis. This is not well assessed on conventional end-points. Since 2001, we have studied the prevalence of "forgotten knee" (FK) after TKR in a prospective pragmatic cohort, with comparison to conventional scores.

METHODS

Patients undergoing TKR were enrolled between January 2001 and January 2008. Preoperative medical history and anthropometric and clinical data were recorded, and composite scores (Knee Society Score (KSS), Lequesne) were assessed. At each follow-up visit, FK acquisition was assessed by the closed question "Do you feel the operated knee to be always normal in all everyday activities?".

RESULTS

Five hundred and eighty-four TKRs in 485 patients were included. Among the TKR, 91.6% were performed for severe osteoarthritis of the knee. FK frequency at a mean 75.8 months' follow-up was 42.9% while 86.1% of TKRs had excellent (KS Knee Score (KSKS)>80) or 34.9% perfect (KSKS=100) outcome. Only 66.1% of the 204 TKRs with perfect outcome on KSKS were reported as FK. Most patients achieved FK within 18 months.

CONCLUSION

In this prospective study, 42.9% of TKRs were considered always forgotten in all everyday activities.

Lack of evidence to support present medial release methods in total knee arthroplasty

PURPOSE

The aim of this review was to identify a reliable sequential medial release protocol for restoration of soft tissue balance in total knee arthroplasty of the varus osteoarthritic knee and to allow for improved intraoperative decision-making.

METHOD

Current medial release sequences and applicability based upon pre-operative deformity have been reviewed. Furthermore, risks associated with over release, and the necessity of medial release, are discussed.

RESULTS

The different medial release sequences are discussed in relation to pre-operative deformity, along with potential complications associated with medial release. It was found that release sequences may include the deep and superficial components of the medial collateral ligament, the posteromedial capsule, the posterior oblique ligament, the pes anserinus (pes A), and tendons of the semimembranosus and medial gastrocnemius muscle. The sequences described were found to vary substantially between studies, and very few studies had systematically quantified the effect of each release on balance.

CONCLUSION

While medial release is the standard intraoperative mode of balancing, there is a lack of evidence to support current methods. The correct method for defining intraoperatively the sequence, extent and magnitude of releases required remains ill-defined. It could be argued that the classic extensive medial release may be unnecessary and may be associated with iatrogenic injury to the pes A and saphenous nerve, instability and abnormal knee kinematics. Minimal medial release may allow for improved soft tissue balancing leading ultimately to improved functional outcome.

LEVEL OF EVIDENCE

V (expert opinion).

NexGen® LPS mobile bearing total knee arthroplasty: 10-year results

PURPOSE

Mobile bearing (MB) knee prostheses were designed to improve the performances of the total knee arthroplasties (TKA). The clinical superiority of MB prosthesis compared to its fixed bearing counterpart has remained elusive. This study prospectively evaluates the cumulative survivorship, clinical, radiographic results, and complications of a large series of MB TKAs in relation to patient age, sex, severity of arthritis, and patellar resurfacing.

METHODS

This study evaluates the 5- to 10-year cumulative survival rate of the NexGen(®) LPS MB. Between 2000 and 2005, we performed a consecutive series of 332 MB, posterior-stabilized TKA in 249 patients (mean age 71.2 years, SD 6.9). The implants were clinically evaluated with the Hospital Special Surgery Knee Score (HSS-KS) and radiographically with the Knee Society Roentgenographic Evaluation System (KS-RES). The mean follow-up was 76.3 months (minimum 5 years).

RESULTS

The HSS-KS improved from 55 pre-operatively to 86 at the end of follow-up. According to the KS-RES, the implants were anatomically aligned and progressive radiolucent lines appeared in four knees (1.2 %). The patella was selectively resurfaced in 162 of 332 knees. Patients with the patella resurfaced had better clinical results compared to those not resurfaced, but there was no difference in terms of survival. The cumulative survival rate was 98.4 % at 10 years (Kaplan-Meier's analysis).

CONCLUSIONS

This MB implant provided reliable and durable clinical results with a survivorship of over 98 % at 10 years, in unselected patients regardless of age, sex, severity of disease, and patellar treatment.

A systematic review of clinical outcomes and survivorship after total knee arthroplasty with a contemporary modular knee system

A systematic review appraising the clinical performance and safety of the primary SIGMA modular knee system (DePuy-Synthes, Warsaw, Ind.) found 5 registry reports and 53 journal publications reporting survivorship or postoperative increase in Knee Society scores on 241632 primary SIGMA knee arthroplasties. Pooled data from national joint registries and clinical studies on primary SIGMA knee survivorship were comparable. Both were higher than for all other knees in 5 national joint registries up to 5 years. Compared with pooled data from 2 independent systematic reviews of primary non-SIGMA knees, the SIGMA system provided comparable postoperative changes in Knee Society knee score and a nonsignificant trend of higher postoperative changes in Knee Society function score. This finding suggests that this knee system provides excellent durable results.

Medium-term osteolysis with the Wallaby I® deep-dished total knee prosthesis

BACKGROUND

Highly congruent total knee prostheses were introduced in the 1990s in the hope of decreasing polyethylene wear, thereby minimising loosening and particle-induced peri-prosthetic osteolysis. Despite promising long-term outcomes, substantial rates of aseptic loosening were reported with conventional gamma-irradiated polyethylene inserts, suggesting that highly reticulated polyethylene should be used instead. We assessed medium-term outcomes of the Wallaby I® total knee prosthesis with a deep-dished tibial insert made of conventional gamma-irradiated polyethylene.

HYPOTHESIS

We hypothesised that the deep-dished Wallaby I® prosthesis was associated with similar or lower rates of aseptic loosening and peri-prosthetic osteolysis compared to posterior-stabilised prostheses.

MATERIALS AND METHODS

At our institution, 121 consecutive patients underwent total knee arthroplasty (TKA) with a deep-dished cemented prosthesis (Wallaby I®, Sulzer/Centerpulse, Zürich, Switzerland) between 2001 and 2005. Among them, 89 had complete follow-up data over a 4-year period and a mean follow-up of 96 months. We retrospectively analysed the clinical and radiographic IKS scores in these 89 patients.

RESULTS

Osteolysis with aseptic loosening required revision TKA of 10 knees after a mean follow-up of 81 months. Mean 9-year prosthesis survival was 88±17%. Four inserts exhibited evidence of delamination. A fracture of the postero-medial aspect of the tibial baseplate beneath a zone of insert wear was found in 1 knee and gross mobility of the insert on the baseplate in 6 knees. The other 79 patients had good clinical and radiographic outcomes with a mean range of active knee flexion of 108±15°.

DISCUSSION

The medium-term outcomes in our study were inferior to those reported with posterior-stabilised tibial components. Sporadic variations in polyethylene quality may explain the cases of osteolysis (shelf oxidation). In addition, the increased shear stresses related to the deep-dish design may increase backside wear, thereby compromising insert fixation to the baseplate. We believe the Wallaby I® prosthesis should no longer be used, and we recommend computed tomography follow-up of patients harbouring this prosthesis.

LEVEL OF EVIDENCE

Level IV (retrospective study).

180° rotatory dislocation of the rotating platform of a posterior-stabilized mobile-bearing knee prosthesis; possible complication after closed reduction of a posterior dislocation--a case report

Dislocation of the rotating platform is a significant early complication of mobile-bearing total knee arthroplasty. The authors report an unusual case of acute 180° rotatory dislocation of the rotating platform after closed reduction of a posterior dislocation of a posterior-stabilized mobile-bearing total knee prosthesis. A 71-year-old male with knee osteoarthritis underwent TKRA using a posterior-stabilized mobile-bearing prosthesis. Posterior dislocation of the prosthesis occurred at 5 weeks postoperatively, and closed reduction of the posterior dislocation resulted in complete 180° rotatory dislocation of the rotating platform. The patient was treated by open exploration and polyethylene exchange for a larger component. This case illustrates that dislocation of a posterior-stabilized mobile-bearing total knee prosthesis can occur given valgus laxity and causes a 90° spin-out of the polyethylene insert, and that closed reduction attempts may contribute to complete 180° rotatory dislocation of the rotating platform. Special attention should be given to both AP and lateral views to ensure that the platform is truly reduced and not rotated by 180°. Plain digital radiography, which enhances the density of polyethylene, or arthrography is helpful for diagnosing this complication.

Assessment of reactive synovitis in rotating-platform posterior-stabilized design: a 10-year prospective matched-pair MRI study

This is the first long-term (mean 11.6 years), prospective, matched-pair study (based on age, gender, BMI and UCLA scores) using MAVRIC (multi-acquisition variable-resonance image combination) magnetic resonance imaging to analyze reactive synovitis and osteolysis between rotating-platform posterior-stabilized (RP-PS), fixed-bearing metal-back (FB-MB), and all-polyethylene tibial (APT) in active patients (24 total, 8 in each group, mean age of 64 years, mean UCLA of 8.5) with identical femoral component and polyethylene. Reactive synovitis was observed in 6 RP-PS (75%), all 8 FB-MB (100%), and 6 APT (75%). There was a significant difference between the RP-PS and FB-MB knees in volumetric synovitis (P=0.023). Osteolysis with bone loss more than 4mm was seen in 3 FB-MB, 2 APT and none for RP-PS. These were not statistically significant.

Computed tomography morphometric study of gender differences in osteoarthritis proximal tibias

One hundred and thirty osteoarthritic knees(65 males, 65 females) from a Chinese population were measured by computed tomography for tibial mediolateral (ML), middle anteroposterior (AP), medial anteroposterior (MAP), lateral anteroposterior (LAP) dimensions and ML/AP aspect ratio. The ML/AP aspect ratio were classified into 3 groups based on AP dimensions(<48 mm, 48-52 mm, >52 mm) to compare the morphologic differences of proximal tibia between males and females. The mean ML, AP, MAP and LAP dimensions of proximal tibia showed significant differences for sex (P < .01). We found a progressively decreased in the ML/AP aspect ratio with an increasing AP dimension, and males have larger ML/AP aspect ratio than that of females under a given AP dimension (P < .01). This indicates that under a given AP dimension prosthesis, the tibial ML dimension have the potential to be undersized in males and to overhang in females. This study may provide important reference in designing proper gender-specific tibia prosthesis with different ML/AP aspect ratio for Chinese males and females.

Survival analysis of total knee arthroplasty at a minimum 10 years' follow-up: a multicenter French nationwide study including 846 cases

INTRODUCTION

Survivorship for modern total knee arthroplasties (TKA) is not precisely known from large series, other than registries. The present retrospective study therefore analyzed 846 TKAs at a minimum 10 years' follow-up.

HYPOTHESIS

Ten-year survivorship for TKAs in a multicenter study exceeds 90%, independently of design and level of prosthetic constraint.

MATERIALS AND METHODS

Eight hundred and twenty-eight patients (846 TKAs) were assessed on the Knee Society score. Mean age was 71 years (range, 41-93 years); 274 males and 554 females (67%); 496 patients (60%) were active; diagnosis was principally osteoarthritis (n=752 [89%]). Most TKAs were cemented (n=704 [83%]), replacing the patella (n=668 [79%]) and sacrificed the posterior cruciate ligament (PCL) (n=707 [84%]), 65% being posterior-stabilized and 35% ultracongruent, with fixed (39%) or mobile bearing (61%).

RESULTS

At a minimum 10 years' follow-up, mean knee score rose from 35 (15-55) to 83 points (74-95), and functional score from 24 (5-45) to 74 points (60-90); mean flexion rose from 105° (25-125°) to 112° (25-125°). Mean hip-knee-ankle angle was 179.5° (169-189°). Sixty-three (7.5%) revision surgeries were required, mainly for loosening (n=18 [2%]) or infection (n=18 [1.8%]). Overall 10-year survivorship was 92% (95% CI: 0.90-0.94). There was no significant difference in survivorship according to implant design or PCL retention. Activity level correlated with revision rate; mechanical complications were more frequent in active and infectious complications in sedentary subjects. Revision was not more frequent in TKA aligned outside the 177-183° range.

DISCUSSION

Ten-year TKA survivorship was 92%, independently of design and level of mechanical stress. Revision was mainly for infection or loosening, and not for greater than 3° axis misalignment. Mechanical complications were more frequent in younger and more active subjects, for whom therefore other treatment options or technical improvements should be sought.

LEVEL OF EVIDENCE

Level IV. Retrospective study.

No better flexion or function of high-flexion designs in Asian patients with TKA

BACKGROUND

Recently, high-flexion PCL-retaining (CR) and -substituting (PS) knee prostheses were designed to allow greater and safer flexion after TKA. However, the advantages of high-flexion TKA over standard design have been debated in terms of early maximal flexion. A recent study reported a high incidence of early loosening of the femoral component related to the deep flexion provided by high-flexion PS TKA.

QUESTIONS/PURPOSES

We determined whether high-flexion fixed bearing CR and PS prostheses would provide (1) a better flexion, (2) a better function, and (3) a higher incidence of radiographic loosening than TKA performed using standard fixed bearing CR prostheses in Asian patients.

METHODS

From a total of 182 patients with primary unilateral TKA, we retrospectively reviewed 137 TKAs: 47 with high-flexion CR, 42 with high-flexion PS, and 48 with standard CR designs. ROM, Knee Society scores, and WOMAC scores were evaluated and compared among the three groups. Radiographically, we assessed radiolucent zones and component loosening. Minimum followup was 5 years (mean, 6.2 years; range, 5-8 years).

RESULTS

We found no differences among the three groups in mean maximal flexion (high-flexion CR: 135°; high-flexion PS: 134°; standard CR: 136°), Knee Society scores, and WOMAC scores at last followup. Also, there were no differences among the three groups in terms of radiolucent lines around the prosthesis. No patient in any group had loosening of the femoral component.

CONCLUSIONS

The high-flexion CR or PS design had no advantages over the standard CR design with respect to ROM, clinical scores, and radiolucent lines around the femoral or tibial component after 5 years' followup.