Nanoparticle-based Point of Care Immunoassays for in vitro Biomedical Diagnostics

Inkjet Printing-Based Immobilization Method for a Single-Step and Homogeneous Competitive Immunoassay in Microchannel Arrays

In this study, we report an inkjet printing-based method for the immobilization of different reactive analytical reagents on a single microchannel for a single-step and homogeneous solution-based competitive immunoassay. The immunoassay microdevice is composed of a poly(dimethylsiloxane) microchannel that is patterned using inkjet printing by two types of reactive reagents as dissolvable spots, namely, antibody-immobilized graphene oxide and a fluorescently labeled antigen. Since nanoliter-sized droplets of the reagents could be accurately and position-selectively spotted on the microchannel, different reactive reagents were simultaneously immobilized onto the same microchannel, which was difficult to achieve in previously reported capillary-based single-step bioassay devices. In the present study, the positions of the reagent spots and amount of reagent matrix were investigated to demonstrate the stable and reproducible immobilization and a uniform dissolution. Finally, a preliminary application to a single-step immunoassay of C-reactive protein was demonstrated as a proof of concept.

A lateral flow biosensor based on gold nanoparticles detects four hemorrhagic fever viruses

The pathogen of viral hemorrhagic fever (VHF), which is harmful to human health, is a hemorrhagic fever virus. Clinicians have long needed convenient and sensitive point-of-care rapid diagnostic tests (RDTs) for hemorrhagic fever viruses. Commonly used methods for pathogen detection rely on conventional culture-based tests, antibody-based assays and polymerase chain reaction (PCR)-based techniques. However, these methods are costly, laborious and time-consuming. Herein, we present a simple and sensitive biosensor for the rapid detection of hemorrhagic fever viruses. For this assay, we develop lateral flow biosensors (LFBs) based on magnetic beads and nicking enzyme-assisted isothermal strand-displacement amplification (SDA) for the detection of hemorrhagic fever viruses. The detection limit of this assay is 10 fM.

Using Simple-Structured Split Aptamer for Gold Nanoparticle-based Colorimetric Detection of Estradiol

Demand for the detection of estradiol, which is a naturally occurring hormone, has been increasing. Gold nanoparticle-based colorimetric aptasensors have been developed for estradiol detection; however, the long sequence of aptamers due to the formation of the secondary structure likely affects the sensitivity of the aptasensors. Herein, a sensitive colorimetric biosensor is developed for label-free detection of estradiol by using an estradiol-specific split aptamer. The results demonstrate that a superior response is observed when a split aptamer with a high free energy of the secondary structure (ΔG > -3 kcal/mol) is used, in comparison to that observed using a split aptamer with a low free energy of the secondary structure (ΔG < -3 kcal/mol) at 27°C. After selecting the appropriate split aptamer, the standard calibration curve obtained for estradiol has a detection limit of 6.7 nM, with a linear range of 6.7 nM - 66.7 μM in the logarithmic scale. Furthermore, this assay is sensitive, easy-to-operate, inexpensive, and non-time-consuming (provides results within 50 min), thereby showing potential for clinical applications (detection of other small molecular targets).

Novel approaches for colorimetric measurements in analytical chemistry - A review

Colorimetric techniques have been developed and used in routine analyses for over a century and apparently all their potentialities have been exhaustively explored. However, colorimetric techniques have gained high visibility in the last two decades mainly because of the development of the miniaturization concept, for example, paper-based analytical devices that mostly employ colorimetric reactions, and by the advances and popularity of image capture instruments. The impressive increase in the use of these devices was followed by the development and enhancement of different modes of color detection to meet the demands of making qualitative, semi-quantitative, and fully quantitative analyses of multiple analytes. Cameras, scanners, and smartphones are now being used for this purpose and have become suitable alternatives for different approaches to colorimetric analysis; this, in addition to advancements in miniaturized devices. On the other hand, recent developments in optoelectronics technologies have launched more powerful, more stable and cheaper light-emitting diodes (LEDs), which once again have become an interesting tool for the design of portable and miniaturized devices based on colored reactions. Here, we present a critical review of recent developments and challenges of colorimetric detection in modern analytical chemistry in the last five years, and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric detection in different application approaches.

A vinyl sulfone clicked carbon dot-engineered microfluidic paper-based analytical device for fluorometric determination of biothiols

A microfluidic paper-based analytical device integrating carbon dot (CDs) is fabricated and used for a fluorometric off-on assay of biothiols. Vinyl sulfone (VS) click immobilization of carbon dots (CDs) on paper was accomplished by a one-pot simplified protocol that uses divinyl sulfone (DVS) as a homobifunctional reagent. This reagent mediated both the click oxa-Michael addition to the hydroxyl groups of cellulose and ulterior covalent grafting of the resulting VS paper to NH₂-functionalized CDs by means of click aza-Michael addition. The resulting cellulose nanocomposite was used to engineer an inexpensive and robust microfluidic paper-based analytical device (μPAD) that is used for a reaction-based off-on fluorometric assay of biothiols (GSH, Cys, and Hcy). The intrinsic blue fluorescence of CDs (with excitation/emission maxima at 365/450 nm) is turned off via the heavy atom effect of an introduced iodo group. Fluorescence is turned on again due to the displacement of iodine by reaction with a biothiol. The increase in fluorescence is related to the concentration over a wide range (1 to 200 μM for GSH and 5-200 μM for Cys and Hcy, respectively), and the assay exhibits a low detection limit (0.3 μM for GSH and Cys and 0.4 μM for Hcy). The method allows for rapid screening and can also be used in combination with a digital camera readout. Graphical abstract Schematic representation of a μPAD based on click immobilized carbon dots and used for a reaction-based fluorometric off-on assay of biothiols. The intrinsic blue fluorescence of carbon dots is turned off via the heavy atom effect of an introduced iodo group and turned on by the displacement of this atom by reaction with a biothiol.