Poly(2-(diethylamino)ethyl methacrylate)-based, pH-responsive, copolymeric mixed micelles for targeting anticancer drug control release

Delivery of Chemotherapy Agents and Nucleic Acids with pH-Dependent Nanoparticles

With less than one percent of systemically injected nanoparticles accumulating in tumors, several novel approaches have been spurred to direct and release the therapy in or near tumors. One such approach depends on the acidic pH of the extracellular matrix and endosomes of the tumor. With an average pH of 6.8, the extracellular tumor matrix provides a gradient for pH-responsive particles to accumulate, enabling greater specificity. Upon uptake by tumor cells, nanoparticles are further exposed to lower pHs, reaching a pH of 5 in late endosomes. Based on these two acidic environments in the tumor, various pH-dependent targeting strategies have been employed to release chemotherapy or the combination of chemotherapy and nucleic acids from macromolecules such as the keratin protein or polymeric nanoparticles. We will review these release strategies, including pH-sensitive linkages between the carrier and hydrophobic chemotherapy agent, the protonation and disruption of polymeric nanoparticles, an amalgam of these first two approaches, and the release of polymers shielding drug-loaded nanoparticles. While several pH-sensitive strategies have demonstrated marked antitumor efficacy in preclinical trials, many studies are early in their development with several obstacles that may limit their clinical use.

pH-Sensitive Polyacrylic Acid-Gated Mesoporous Silica Nanocarrier Incorporated with Calcium Ions for Controlled Drug Release

In this work, polyacrylic acid-functionalized MCM-41 was synthesized, which was made to interact with calcium ions, in order to realize enhanced pH-responsive nanocarriers for sustained drug release. First, mesoporous silica nanoparticles (MSNs) were prepared by the sol-gel method. Afterward, a (3-trimethoxysilyl)propyl methacrylate (TMSPM) modified surface was prepared by using the post-grafting method, and then the polymerization of the acrylic acid was performed. After adding a calcium chloride solution, polyacrylic acid-functionalized MSNs with calcium-carboxyl ionic bonds in the polymeric layer, which can prevent the cargo from leaking out of the mesopore, were prepared. The structure and morphology of the modified nanoparticles (PAA-MSNs) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis, etc. The controlled release of guest molecules was studied by using 5-fluorouracil (5-FU). The drug molecule-incorporated nanoparticles showed different releasing rates under different pH conditions. It is considered that our current materials have the potential as pH-responsive nanocarriers in the field of medical treatment.

Craft of Co-encapsulation in Nanomedicine: A Struggle To Achieve Synergy through Reciprocity

Achieving synergism, often by combination therapy via codelivery of chemotherapeutic agents, remains the mainstay of treating multidrug-resistance cases in cancer and microbial strains. With a typical core-shell architecture and surface functionalization to ensure facilitated targeting of tissues, nanocarriers are emerging as a promising platform toward gaining such synergism. Co-encapsulation of disparate theranostic agents in nanocarriers-from chemotherapeutic molecules to imaging or photothermal modalities-can not only address the issue of protecting the labile drug payload from a hostile biochemical environment but may also ensure optimized drug release as a mainstay of synergistic effect. However, the fate of co-encapsulated molecules, influenced by temporospatial proximity, remains unpredictable and marred with events with deleterious impact on therapeutic efficacy, including molecular rearrangement, aggregation, and denaturation. Thus, more than just an art of confining multiple therapeutics into a 3D nanoscale space, a co-encapsulated nanocarrier, while aiming for synergism, should strive toward achieving a harmonious cohabitation of the encapsulated molecules that, despite proximity and opportunities for interaction, remain innocuous toward each other and ensure molecular integrity. This account will inspect the current progress in co-encapsulation in nanocarriers and distill out the key points toward accomplishing such synergism through reciprocity.

Crosslinked p(MMA) Particles by RAFT Emulsion Polymerisation: Tuning Size and Stability

The controlled synthesis of amphiphilic di-block copolymers allows a large array of nanostructures to be created, including block copolymer particles, which have proved valuable for biomedical applications. Despite progress in...

Poly(Vinyl Alcohol)-Hydrogel Microparticles with Soft Barrier Shell for the Encapsulation of Micrococcus luteus

The encapsulation of bacteria in polymers results in hybrid materials that are essential for the long-term biological activity of bacteria and formulations in practical applications. Here, the problem of bacterial escape and the exchange of metabolism products from hydrogel microparticles within an aqueous environment are addressed. Bacteria are encapsulated in chemically cross-linked poly(vinyl alcohol) (PVA) hydrogel-microparticles followed by their encapsulation in a pH-responsive and soft antibacterial shell of poly(N,N-diethylamino ethyl methacrylate) (PDEAEMA). This polymer shell acts selectively with regards to the mass transport in and out of the microparticle core and is affected by environmental parameters, such as pH and antibacterial effect. The pH-responsive PDEAEMA shell forms an open porous structure that accelerates nutrient transfer into the PVA core containing living Micrococcus luteus (M. luteus). Results show that the antibacterial effect of PDEAEMA retards the escape of bacteria up to 35 days when the shell is open. Additionally, the permeation of a small molecule into the gel, for example, methylene blue dye through the core/open-shell structure, certifies a flexible barrier for mass transport, which is required in the long term for the biological activity of encapsulated M. luteus.

pH-Responsive copolymer micelles to enhance itraconazole efficacy against Candida albicans biofilms

Candida albicans (C. albicans) is a common fungal pathogen causing both localised and systemic infections. The majority of these infections are promoted by biofilm formation, providing a protective matrix for the embedded fungi thereby evading the host immune defence and promoting resistance against anti-mycotic agents. In this study, pH-responsive micellar systems based on poly-(ethylene glycol) ethyl ether methacrylate (PEGMA) and poly 2-(diethylamino) ethyl methacrylate (DEAEMA) block-copolymers of P(PEGMA-b-DEAEMA) were specifically developed and loaded with the antifungal itraconazole (ICZ) to defeat C. albicans biofilms. The P(PEGMA-b-DEAEMA) di-block polymer micelles demonstrated a particle size of 55 ± 6 nm and high ICZ loads (12.0 ± 0.5% w/w). Within the biofilm's acidic microenvironment, tertiary amines of the pH-sensitive DEAEMA block are protonated, altering their conformation and enhancing the release of the micellar contents. Encapsulation of ICZ within micelles significantly enhanced the activity against C. albicans biofilms, with a significant reduction in the biofilm biomass (>50%) and in the number of viable cells (2.4 Log reduction) achieved, compared with the non-encapsulated ICZ. Confocal microscopy revealed a high affinity and accumulation of the micelles in C. albicans biofilms as a result of their size and specific electrostatic interaction, hence their improved activity. P(PEGMA-b-DEAEMA) based pH-responsive micelles offer significant potential as antifungal carriers for controlling Candida infections.

One-Shot Preparation of Polybasic Ternary Hybrid Cryogels Consisting of Halloysite Nanotubes and Tertiary Amine Functional Groups: An Efficient and Convenient Way by Freezing-Induced Gelation

A convenient method for the preparation of polybasic ternary hybrid cryogels consisting of Halloysite nanotubes (HNTs) and tertiary amine functional groups by freezing-induced gelation is proposed. Ternary hybrid gels were produced via one-shot radical terpolymerization of 2-hydroxyethyl methacrylate (HEMA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS), and DEAEMA in the presence of HNTs. The equilibrium swelling in various swelling media and the mechanical properties of the produced ternary hybrid gels were analyzed to investigate their network structure and determine their final performance. The swelling ratio of HNT-free gels was significantly higher than the ternary hybrid gels composed of high amount of HNTs. The addition of HNTs to terpolymer network did not suppress pH- and temperature-sensitive behavior. While DEAEMA groups were effective for pH-sensitive swelling, it was determined that both HEMA and DEAEMA groups were effective in temperature-sensitive swelling. Ternary hybrid gels simultaneously demonstrated both negative and positive temperature-responsive swelling behavior. The swelling ratio changed considerably according to swelling temperature. Both DEAEMA and HEMA monomers in terpolymer structure were dominant in temperature-sensitive swelling. Mechanical tests in compression of both as-prepared and swollen-state demonstrated that strength and modulus of hybrid cryogels significantly increased with addition of HNTs without significant loss of mechanical strength. Ultimately, the results of the current system can benefit characterization with analysis tools for the application of innovative materials.

Antibacterial Amphiphilic Copolymers of Dimethylamino Ethyl Methacrylate and Methyl Methacrylate to Control Biofilm Adhesion for Antifouling Applications

Amphiphilic copolymers are recognized as important biomaterials and used as antibacterial agents due to their effective inhibition of bacterial growth. In current study, the amphiphilic copolymers of P(DMAEMA-co-MMA) were synthesized using free radical polymerization by varying the concentrations of hydrophilic monomer 2-dimethylamino ethylmethacrylate (DMAEMA) and hydrophobic monomer methyl methacrylate (MMA) having PDI value of 1.65-1.93. The DMAEMA monomer, through ternary amine with antibacterial property optimized copolymers, P(DMAEMA-co-MMA), compositions to control biofilm adhesion. Antibacterial activity of synthesized copolymers was elucidated against Gram-positive Staphylococcus aureus (ATCC 6538) and Gram-negative Escherchia coli (ATCC 8739) by disk diffusion method, and zones of inhibition were measured. The desired composition that was PDM1 copolymer had shown good zones of inhibition i.e., 19 ± 0.33 mm and 20 ± 0.33 mm for E. coli and S. aureus respectively. The PDM1 and PDM2 have exhibited significant control over bacterial biofilm adhesion as tested by six well plate method. SEM study of bacterial biofilm formation has illustrated that these copolymers act in a similar fashion like cationic biocide. These compositions viz. PDM1 and PDM2, may be useful in development of bioreactors, sensors, surgical equipment and drug delivery devices.

Charge-balanced terpolymer poly(diethylaminoethyl methacrylate-hydroxyethyl methacrylate-2-acrylamido-2-methyl-propanesulfonic acid) hydrogels and cryogels: scaling parameters and correlation with composition

The scaling laws relating the preparation conditions to the swelling degree, reduced modulus and effective crosslinking density of poly(diethylaminoethyl methacrylate-co-hydroxyethyl methacrylate-co-2-acrylamido-2-methyl-propanesulfonic acid), henceforth designated as PDHA, gels prepared by radical crosslinking copolymerization in a solvent mixture were reported. Charge-balanced terpolymer PDHA hydrogels and cryogels (PDHA-Hgs and Cgs) were prepared in different monomer feed compositions. The swelling dependence of the reduced modulus was described by a power law relationship G_r≈ (φ_V)^m with an exponent of m = -0.30 at low swelling degree, while in the high swelling region the scaling becomes 0.21, indicating the finite extensibility of the network chains. The scaling exponent for the swelling degree and terpolymer composition, φ_V≈ (Nν)^m, was found to be -0.13, indicating the increasing extent of the topological constraints arising from the trapped entanglements. By combining elasticity and swelling results, the scaling relationship between the apparent crosslink density and HEMA content used in the terpolymer feed was obtained as a cubic polynomial of the mol% of HEMA. In the HEMA-rich terpolymer PDHA Hgs and Cgs, the swelling degree was possibly controlled by the HEMA part of the terpolymer network, while the presence of DEAEM units in the network triggered the thermoresponsive swelling behavior. The dependence of interaction parameter χ on the volume fraction of the crosslinked terpolymer network in the swollen gel ν₂ was evaluated and the results revealed extremely strong concentration dependence of χ for all terpolymer samples. Because of their inherent properties, the resulting terpolymer gels might contribute to the improvement of the loading capacity of polymers used in anticancer drug delivery systems.

Synthesis and characterization of amphiphilic star-shaped copolymers based on β-cyclodextrin for micelles drug delivery

PURPOSE

A series of β-CD amphiphilic star-shaped copolymers with exceptional characteristics were synthesized and their potential as carriers for micelles drug delivery was investigated.

METHODS

A series of amphiphilic copolymers based on β-CD were synthesized by introducing poly (acrylic acid)-co-poly(methyl methacrylate)-poly (vinyl pyrrolidone) or poly (acrylic acid)-co-poly(methyl methacrylate)-co-poly(monoacylated-β-CD)-poly (vinyl pyrrolidone) blocks to the primary hydroxyl group positions of β-CD. The micellization behavior of the copolymers, the synthesis conditions, characteristics, drug release in vitro and tissue distribution of vinpocetine (VP) micelles in vivo were investigated.

RESULTS

Around 60 types of β-CD amphiphilic star-shaped copolymers were successfully synthesized and the critical micelle concentration ranged from 9.80 × 10^-4 to 5.24 × 10^-2g/L. The particle size, drug loading and entrapment efficiency of VP-loaded β-CD-P₄ micelles prepared with optimal formulation were about 65 nm, 21.44 ± 0.14%, and 49.05 ± 0.36%, respectively. The particles had good sphericity. The cumulative release rates at 72 h of VP-loaded β-CD-P₄ micelles in pH 1.0, pH 4.5, pH 6.5, or pH 7.4 media were 93%, 69%, 49%, and 43%, respectively. And, the lung targeting efficiency of VP-loaded β-CD-P₄ micelles was 8.98 times higher than that of VP injection.

CONCLUSION

The VP-loaded β-CD-P₄ micelles exhibited controlled-release property, pH-induced feature and lung targeting capacity compared with VP injection, suggesting that the β-CD-P₄ copolymers are an excellent candidate for micelles drug delivery.