Assessing point-of-use ultraviolet disinfection for safe water in urban developing communities

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Applications of waste-derived visibly active Fe-TiO2 composite incorporating the hybrid process of photocatalysis and photo-Fenton for the inactivation of E. coli

The study reports the applications of waste-derived visibly active Fe-TiO₂ composite for the inactivation of E. coli present in water. The Fe/TiO₂ catalyst holds remarkable properties of in situ hybrid effect via combining the TiO₂-photocatalytic and photo-Fenton process in one system causing increased production of OH˚. The quantum yield (QY) and reaction rate constant of this hybrid process at 40 W m^-2 (UV-A irradiation) were found to be significantly higher in less treatment time (45 min) of E. coli inactivation. 23% synergy of in situ hybrid process over single processes was also observed. The increase in the K⁺ concentration at regular intervals confirmed the cell wall damage. In fully inactivated samples, no regrowth of cells was observed even after 24 and 48 h of dark study. Additionally, even after 100 recycles, the Fe/TiO₂ catalyst demonstrated an exceptional durability/recyclability efficacy. The findings of this study highlight the potential of the hybrid process as a viable idea for post-treatment of the wastewater that can be implemented effectively in practice.

Repeated pressurization as a potential cause of deterioration in virus removal by aged reverse osmosis membrane used in households

Reverse osmosis (RO) membrane is widely used for household water treatment in areas with limited access to safe drinking water; however, some studies documented deterioration in the quality of RO permeate. Repeated pressurization from intermittent operation in households is suspected to have an adverse effect on RO. This study aimed to evaluate virus removal by RO used in actual households as well as the water quality of permeate, and to elucidate the main cause of RO deterioration. We conducted a survey in households in Hanoi, Vietnam, to collect 27 membranes along with their usage history, where virus removal was investigated in laboratory. Of the used RO membranes, 22% did not show the protective level, >3 log₁₀ (99.9%) virus removal, recommended by World Health Organization. The differences in virus removal among Aichi virus, MS2 and φX-174 were <0.5 log₁₀. All membranes with estimated pressurization times of <4000 showed >3 log₁₀ virus removal, while 17% of membranes used for <3years, the manufacturers' warranty period, did not achieve the criterion. Therefore, virus removal performance may not be assured even if the users replace the membrane following the warranty period. Furthermore, more pressurized membranes exhibited significantly lower virus removal than less pressurized ones, suggesting a major role of repeated pressurization in the deterioration of RO. Coliforms were detected from 44% of the permeate of the point-of-use devices applying RO (RO-POU), raising concerns on the extrinsic contamination and regrowth of bacteria. Consequently, RO in households may deteriorate more rapidly than the manufactures' expectation due to repeated pressurization. RO in households should be replaced based on not only membrane age but also total pressurized times (i.e., 4000 times) to keep the protective level of virus removal. The deteriorated bacterial quality in RO permeate suggested the need for installing post-treatment, such as UV irradiation.