Synthesis and characterization of a propazine imprinted polymer for the extraction of triazines herbicides

Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples

Benomyl is a benzimidazol fungicide used against various crop pathogens. Although banned in many countries, it is still widely used worldwide and is listed in different monitoring programs among the substances to be monitored to assess human exposure to pesticide residues. The assessment of benomyl is mainly based on the analysis of the residues of its most important metabolite, carbendazim. Existing methods often lack of selectivity and display a limited performance because of the presence of co-extracted compounds. Molecularly imprinted polymers (MIPs) offer an alternative methodology, adsorbing preferentially those target molecules for which the polymers are specifically prepared. In this study, we optimized the synthesis of a polymer imprinted with benomyl. Tests of specificity recognition showed a good performance for carbendazim compared with other similar pesticides. The mean recovery of benomyl (measured as carbendazim) from water samples was estimated to be 90% for MIPs while with real soil samples collected in Morocco the recovery efficiency was 62%. Preliminary tests also suggest that this MIP can implement traditional SPE techniques for assessing benomyl residual concentrations in environmental samples.

Removal of triazine-based herbicides on specific polymeric sorbent: batch studies

The triazine-based herbicides removal from aqueous solution on specific polymeric adsorbent was studied. Poly(divinylbenzene) modified with maleic anhydride in Diels-Alder reaction was selected for the sorption experiments because molecular structures of triazine derived herbicides exhibit complementarity to the arrangement of functional groups in the polymer. The presence of carboxyl groups in adsorbent structure resulted in specific directional interactions, such as hydrogen bonds, which can intensify adsorption ability towards triazines. In the case of both atrazine and terbuthylazine the effect is more intensive, whereas in sorption of simazine and propazine the non-specific interactions have higher importance than hydrogen bonds. Specific interactions in investigated systems are between the hydrogen atom of the amino group of triazine and the carbonyl oxygen atom of the carboxyl group of the modified poly(divinylbenzene) (O…H–N). Only in the case of terbuthylazine the creation of hydrogen bonds between hydroxyl hydrogen atom of carboxylic group and nitrogen atom containing free electron pair from triazine (O–H…N) was observed. The sorption of simazine, atrazine and propazine does not depend on pH in the acidic region, whereas in the case of terbuthylazine an increase in sorption efficiency is observed while pH decreases.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Atrazine molecular imprinted polymers: comparative analysis by far-infrared and ultraviolet induced polymerization

Atrazine molecular imprinted polymers (MIPs) were comparatively synthesized using identical polymer formulation by far-infrared (FIR) radiation and ultraviolet (UV)-induced polymerization, respectively. Equilibrium binding experiments were carried out with the prepared MIPs; the results showed that MIP_uv possessed specific binding to atrazine compared with their MIP_FIR radiation counterparts. Scatchard plot’s of both MIPs indicated that the affinities of the binding sites in MIPs are heterogeneous and can be approximated by two dissociation-constants corresponding to the high-and low-affinity binding sites. Moreover, several common pesticides including atrazine, cyromazine, metamitron, simazine, ametryn, terbutryn were tested to determine their specificity, similar imprinting factor (IF) and different selectivity index (SI) for both MIPs. Physical characterization of the polymers revealed that the different polymerization methods led to slight differences in polymer structures and performance by scanning electron microscope (SEM), Fourier transform infrared absorption (FT-IR), and mercury analyzer (MA). Finally, both MIPs were used as selective sorbents for solid phase extraction (SPE) of atrazine from lake water, followed by high performance liquid chromatography (HPLC) analysis. Compared with commercial C₁₈ SPE sorbent (86.4%–94.8%), higher recoveries of atrazine in spiked lake water were obtained in the range of 90.1%–97.1% and 94.4%–101.9%, for both MIPs, respectively.

Preparation of Melamine Molecularly Imprinted Polymeric Microspheres by Two-Step Seed Swelling Polymerization

Melamine molecularly imprinted polymeric microsphere (MIPM) was initially prepared by two-step seed swelling polymerization methods. Factors affecting the particle morphologies including emulsifier, dispersant, the water-oil ratio, and etc were optimized in order to obtain the MIPMs with a final narrow particle diameter of 3-5 μm. Characterization of the resulted polymeric microspheres was investigated by scanning electron microscope (SEM), infrared absorption spectroscopy (IR), and mercury analyzer (MA), respectively. When the initial concentration of melamine was 1.0 mmol L-1, the affinity capacity of MIPMs was 2.0 times than that of NIPMs. Scatchard analysis suggested melamine were recognized by the prepared MIPMs with two classes of binding sites. The apparent maximum binding capacity and dissociation constant were calculated to be 43.2 μmol g-1 (Qmax1) and 2.2×10-4 mol L-1 (Kd1) for high affinity site, whilst to be 102.3 μmol g-1 (Qmax2) and 1.3×10-3 mol L-1 (Kd2) for low affinity site, respectively. Obvious molecular effects towards melamine were further confirmed by the comparative HPLC experiments using NIPMs and MIPMs as the stationary phases, respectively.