Stability of nano-sized titanium dioxide in an aqueous environment: effects of pH, dissolved organic matter and divalent cations

Combined toxic effects of TiO2 nanoparticles and organochlorines on Chlorella pyrenoidosa in karst area natural waters

With the discharge of nanoparticles (NPs) into the environment, NPs can interact with coexisting organic pollutants, resulting in combined toxic effects. In order to more realistically evaluate the potential toxic effects of NPs and coexisting pollutants on aquatic organisms. We evaluated the combined toxicities of TiO₂ nanoparticles (TiO₂ NPs) and three different organochlorines(OCs)-pentachlorobenzene (PeCB), 3,3',4,4'-tetrachlorobiphenyl (PCB-77) and atrazine to algae (Chlorella pyrenoidosa) in three karst natural waters. The results indicate that the individual toxicities of TiO₂ NPs and OCs in natural waters were less than those of OECD medium, and the combined toxicities were different from but generally similar to those of OECD medium. The individual and combined toxicities were the largest in UW. The correlation analysis showed that the toxicities of TiO₂ NPs and OCs were mainly related to TOC, ionic strength, Ca²⁺ and Mg²⁺ in natural water. The binary combined toxicities of PeCB and atrazine with TiO₂ NPs to algae were synergistic. The binary combined toxicity of TiO₂ NPs and PCB-77 to algae was antagonistic. The presence of TiO₂ NPs increased the algae-accumulations of OCs. PeCB and atrazine all increased the algae-accumulations of TiO₂ NPs, while PCB-77 showed the opposite result. The above results indicated that due to the influence of different hydrochemical properties in karst natural waters, there were differences between TiO₂ NPs and OCs in their toxic effects, structural and functional damage, and bioaccumulation.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

A semi-quantitative risk ranking of potential human exposure to engineered nanoparticles (ENPs) in Europe

Large quantities of engineered nanoparticles (ENPs) have emerged on the European market with the rapid development of nanotechnology, however knowledge of potential health risks to humans remains in its infancy. The ENP safety issue is of pressing concern as their novel physicochemical characteristics have been illustrated compared to other bulk-form counterparts. Therefore, it is critical to carry out a comprehensive risk assessment for ENPs to guide risk management in industrial sectors. Based on current data availability, a risk ranking model is developed in accordance with the European Chemicals Agency (ECHA) advice for ENP risk assessment. In this study a Quantity, Exposure, Hazard (QEH) risk scoring model was adopted for characterizing both quantitative and qualitative data, including potential exposure pathways and hazard information. Scores were assigned to quantities of ENPs used in consumer products, intake likelihoods (oral, inhalation, and dermal intake), and hazard potential. Exposure through environmental routes and through consumer products are regarded as significant potential exposure routes. This model prioritized ENPs used in Europe according to human health risk potential. Nano-titanium dioxide (TiO₂) ranked the highest, resulting from exposure through consumer products. Silver nanoparticles (AgNP), as the second most critical ENP, is of most concern in terms of the risk from environmental sinks. Regarding the compartmentalization of total ENP risks to humans, the consumption of consumer products with nano-ingredients, especially nano-TiO₂, nano-silicon dioxide (SiO₂), and AgNP, constitutes the majority of the QEH risk index. The inadequacy of ENP risk management procedures is highlighted, not only during manufacturing, but also during nanomaterial waste disposal processes from marketplace through to the environment. Current risk assessments are based upon recent knowledge of the ENP class as novel pollutants, highlighting the need for further quantification of underlying risks as data emerges.

Impacts of dissolved organic matter on aqueous behavior of nano/micron-titanium nitride and their induced enzymatic/non-enzymatic antioxidant activities in Scenedesmus obliquus

Freshwater dispersion stability and ecotoxicological effects of titanium nitride (TiN) with particle size of 20 nm, 50 nm, and 2-10 μm in the presence of dissolved organic matter (DOM) at various concentrations were studied. The TiN particles that had a more negative zeta potential and smaller hydrodynamic size showed more stable dispersion in an aqueous medium when DOM was present than when DOM was absent. Biochemical assays indicated that relative to the control, the TiN particles in the presence of DOM alleviated to some extent the antioxidative stress enzyme activity in Scenedesmus obliquus. In addition, it was found that the TiN with a primary size of 50 nm at a high concentration presented a significant impact on non-enzymatic antioxidant defense in algal cells.

Influence of organic molecules on the aggregation of TiO2 nanoparticles in acidic conditions

Engineered nanoparticles released into the environment may interact with natural organic matter (NOM). Surface complexation affects the surface potential, which in turn may lead to aggregation of the particles. Aggregation of synthetic TiO₂ (anatase) nanoparticles in aqueous suspension was investigated at pH 2.8 as a function of time in the presence of various organic molecules and Suwannee River fulvic acid (SRFA), using dynamic light scattering (DLS) and high-resolution transmission electron microscopy (TEM). Results showed that the average hydrodynamic diameter and ζ-potential were dependent on both concentration and molecular structure of the organic molecule. Results were also compared with those of quantitative batch adsorption experiments. Further, a time study of the aggregation of TiO₂ nanoparticles in the presence of 2,3-dihydroxybenzoic acid (2,3-DHBA) and SRFA, respectively, was performed in order to observe changes in ζ-potential and particle size over a time period of 9 months. In the 2,3-DHBA-TiO₂ system, ζ-potentials decreased with time resulting in charge neutralization and/or inversion depending on ligand concentration. Aggregate sizes increased initially to the micrometer size range, followed by disaggregation after several months. No or very little interaction between SRFA and TiO₂ occurred at the lowest concentrations tested. However, at the higher concentrations of SRFA, there was an increase in both aggregate size and the amount of SRFA adsorbed to the TiO₂ surface. This was in correlation with the ζ-potential that decreased with increased SRFA concentration, leading to destabilization of the system. These results stress the importance of performing studies over both short and long time periods to better understand and predict the long-term effects of nanoparticles in the environment.

Toxicogenomics analysis of mouse lung responses following exposure to titanium dioxide nanomaterials reveal their disease potential at high doses

Titanium dioxide nanoparticles (TiO₂NPs) induce lung inflammation in experimental animals. In this study, we conducted a comprehensive toxicogenomic analysis of lung responses in mice exposed to six individual TiO₂NPs exhibiting different sizes (8, 20 and 300nm), crystalline structure (anatase, rutile or anatase/rutile) and surface modifications (hydrophobic or hydrophilic) to investigate whether the mechanisms leading to TiO₂NP-induced lung inflammation are property specific. A detailed histopathological analysis was conducted to investigate the long-term disease implications of acute exposure to TiO₂NPs. C57BL/6 mice were exposed to 18, 54, 162 or 486 µg of TiO₂NPs/mouse via single intratracheal instillation. Controls were exposed to dispersion medium only. Bronchoalveolar lavage fluid (BALF) and lung tissue were sampled on 1, 28 and 90 days post-exposure. Although all TiO₂NPs induced lung inflammation as measured by the neutrophil influx in BALF, rutile-type TiO₂NPs induced higher inflammation with the hydrophilic rutile TiO₂NP showing the maximum increase. Accordingly, the rutile TiO₂NPs induced higher number of differentially expressed genes. Histopathological analysis of lung sections on Day 90 post-exposure showed increased collagen staining and fibrosis-like changes following exposure to the rutile TiO₂NPs at the highest dose tested. Among the anatase, the smallest TiO₂NP of 8nm showed the maximum response. The anatase TiO₂NP of 300nm was the least responsive of all. The results suggest that the severity of lung inflammation is property specific; however, the underlying mechanisms (genes and pathways perturbed) leading to inflammation were the same for all particle types. While the particle size clearly influenced the overall acute lung responses, a combination of small size, crystalline structure and hydrophilic surface contributed to the long-term pathological effects observed at the highest dose (486 µg/mouse). Although the dose at which the pathological changes were observed is considered physiologically high, the study highlights the disease potential of certain TiO₂NPs of specific properties.

Biological Activity of Mesoporous Dendrimer-Coated Titanium Dioxide: Insight on the Role of the Surface-Interface Composition and the Framework Crystallinity

Hitherto, the field of nanomedicine has been overwhelmingly dominated by the use of mesoporous organosilicas compared to their metal oxide congeners. Despite their remarkable reactivity, titanium oxide-based materials have been seldom evaluated and little knowledge has been gained with respect to their "structure-biological activity" relationship. Herein, a fruitful association of phosphorus dendrimers (both "ammonium-terminated" and "phosphonate-terminated") and titanium dioxide has been performed by means of the sol-gel process, resulting in mesoporous dendrimer-coated nanosized crystalline titanium dioxide. A similar organo-coating has been reproduced using single branch-mimicking dendrimers that allow isolation of an amorphous titanium dioxide. The impact of these materials on red blood cells was evaluated by studying cell hemolysis. Next, their cytotoxicity toward B14 Chinese fibroblasts and their antimicrobial activity were also investigated. Based on their variants (cationic versus anionic terminal groups and amorphous versus crystalline titanium dioxide phase), better understanding of the role of the surface-interface composition and the nature of the framework has been gained. No noticeable discrimination was observed for amorphous and crystalline material. In contrast, hemolysis and cytotoxicity were found to be sensitive to the nature of the interface composition, with the ammonium-terminated dendrimer-coated titanium dioxide being the most hemolytic and cytotoxic material. This surface-functionalization opens the door for creating a new synergistic machineries mechanism at the cellular level and seems promising for tailoring the biological activity of nanosized organic-inorganic hybrid materials.

Interactions of dissolved organic matter with natural and engineered inorganic colloids: a review

This contribution critically reviews the state of knowledge on interactions of natural colloids and engineered nanoparticles with natural dissolved organic materials (DOM). These interactions determine the behavior and impact of colloids in natural system. Humic substances, polysaccharides, and proteins present in natural waters adsorb onto the surface of most colloids. We outline major adsorption mechanisms and structures of adsorption layers reported in the literature and discuss their generality on the basis of particle type, DOM type, and media composition. Advanced characterization methods of both DOM and colloids are needed to address insufficiently understood aspects as DOM fractionation upon adsorption, adsorption reversibility, and effect of capping agent. Precise knowledge on adsorption layer helps in predicting the colloidal stability of the sorbent. While humic substances tend to decrease aggregation and deposition through electrostatic and steric effects, bridging-flocculation can occur in the presence of multivalent cations. In the presence of DOM, aggregation may become reversible and aggregate structure dynamic. Nonetheless, the role of shear forces is still poorly understood. If traditional approaches based on the DLVO-theory can be useful in specific cases, quantitative aggregation models taking into account DOM dynamics, bridging, and disaggregation are needed for a comprehensive modeling of colloids stability in natural media.