Adsorption and removal of triphenylmethane dyes from water by magnetic reduced graphene oxide

Introduction of nitrogen doped graphene nanosheets as efficient adsorbents for nitrate removal from aqueous samples

PURPOSE

Introducing and developing new kinds of adsorbents are always a significant challenge in water treatments. In this work, for the first time, graphene oxide (GO), nitrogen-doped graphene oxide (ND-GO), highly nitrogen-doped graphene oxide (HND-GO), and 3D high nitrogen-doped graphene oxide (3D-HND-GO) were synthesized and comparatively evaluated in the removal of nitrate content of tap and underground waters.

METHODS

The removal of the target analyte was performed through a batch adsorption approach, and the factors influencing its removal efficiency (i.e., initial pH of the sample, primary concentrations of nitrate, amount of adsorbent, and contact time) were evaluated through a central composite design (CCD) and response surface methodology (RSM).

RESULTS

Based on the results, 3D-HND-GO showed the highest removal efficiency in comparison with the other mentioned nanoparticles. The nitrate removal using this adsorbent was modeled successfully so that R 2, adjusted R 2, and predicted R 2 values were 0.9717, 0.9508, and 0.9010, respectively. In addition, the optimal removal condition was achieved using the Nelder-Mead non-linear optimization algorithm as follow: the initial concentrations of nitrate (expressed as nitrogen): 15.0 mg/mL, the amount of the adsorbent: 2.0 mg/mL; pH of the sample: 3.0; and the contact time: 20.0 min. Under this optimal condition, the actual removal result (92.5 ± 4.0%) was in good agreement with the expected value (94.8 ± 5.1%). Additional studies were also performed to comprehensibly evaluate the adsorption activity of the adsorbent (e.g., kinetic, isotherm, and desorption parameters). The adsorption isotherm complied with the Langmuir model illustrating the considerable mono-layer adsorption capacities for the target ions with qm of 8.7 mg/g. The adsorption process was indicated to obey a pseudo 2nd order kinetic model, with the rate-limiting step for the adsorption phase.

CONCLUSIONS

This study revealed which 3D-HND-G leads to improved yield in the nitrate ions elimination, particularly at acidic media, which was related to the enhanced dispersibility and larger surface area. The adsorbent was further successfully used for treating tap and underground water samples. At the present moment, research as grown to modify 3D-HND-G in orders to increase the potentiality for industrial applications.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00741-7.

Preparation of β-cyclodextrin/graphene oxide and its adsorption properties for methylene blue

Graphene oxide (GO) and GO-based materials have shown excellent adsorption properties because of bounteous structure and rich oxygen functional groups. Many studies have shown that GO are utilized as adsorbents to remove organic dyes from wastewater. GO was prepared by modified Hummers method using graphite powder as raw material. On this basis, β-cyclodextrin/graphene oxide composite (β-CD/GO) was prepared by modifying graphene oxide via β-cyclodextrin(β-CD) crosslinking method. GO and β-CD were characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray (XRD), scanning electron (SEM) and thermogravimetric analysis (TGA). Their adsorbents properties have been studied with methylene blue (MB) as adsorbate. The factors affecting the study include the temperature, adsorption time, amount of adsorbent and system pH value. Adsorption isotherm and kinetics of the adsorption process are systematically analyzed. The results show that β-CD/GO has a different adsorption capacity from GO under the same adsorption factors. Under the optimized conditions (the reaction temperature is 70 °C, the reaction time is 60 min and the concentration of adsorbent is 0.04 g/L), the removal efficiency of β-CD/GO is 20% higher than that of GO from 70% to 90%. The maximum adsorption capacity of β-CD/GO is 76.4 mg/g. β-CD/GO can be effectively regenerated by elution with absolute alcohol. In these tests, β-CD/GO was suggested to be more efficient than GO in the removal of organic dyes.

Synthesis of Porous Biochar Containing Graphitic Carbon Derived From Lignin Content of Forestry Biomass and Its Application for the Removal of Diclofenac Sodium From Aqueous Solution

Porous biochar containing graphitic carbon materials have received great attention from various disciplines, especially for environmental pollutant treatment, due to their cost-effective and specific textural properties. This study exhibited a two-step strategy to compose lignin-porous biochar containing graphitic carbon (LPGC) from pitch pine sawdust and investigated its adsorptive removal for diclofenac sodium (DCF) from an aqueous solution. Sulfuric acid (H2SO4) was utilized to obtain lignin content from biomass and potassium ferrate (K2FeO4) and was adopted to fulfill the synchronous carbonization and graphitization of LPGC. Through slow pyrolysis in atmospheric N2 (900°C - 2 h), the structure of the as-prepared sample was successfully modified. Using SEM images, a stripped layer structure was observed on the H2SO4-treated sample for both one-step and two-step activated samples, indicating the pronounced effect of H2SO4 in the layering of materials. K2FeO4 acted as an activator and catalyst to convert biomass into the porous graphitic structure. The BET surface area, XRD and Raman spectra analyses demonstrated that LPGC possessed a micro/mesoporous structure with a relatively large surface area (457.4 m2 g-1) as well as the presence of a graphitic structure. Further adsorption experiments revealed that LPGC exhibited a high DCF adsorption capacity (qmax = 159.7 mg g-1 at 298 K, pH = 6.5). The effects of ambient conditions such as contact time, solution pH, temperature, ionic strength, electrolyte background on the uptake of DCF were investigated by a batch adsorption experiment. Results indicated that the experimental data were best fitted with the pseudo second-order model and Langmuir isotherm model. Furthermore, the adsorption of DCF onto the LPGC process was spontaneous and endothermic. Electrostatic interaction, H-bonding interaction, and π-π interaction are the possible adsorption mechanisms. The porous biochar containing graphitic carbon obtained from the lignin content of pitch pine sawdust may be a potential material for eliminating organic pollutants from water bodies.

Adsorption of nicotine in aqueous solution by a defective graphene oxide

Extensive concerns have been focused on the emerging contaminants including nicotine in the aquatic system recently. Graphene oxide (GO) and modified graphene oxides (GO-COOH and defective GO-COOH) are used as effective adsorbents to remove nicotine from aqueous solution. The adsorption isotherms and kinetics of the adsorbents all fit well with Langmuir model and pseudo-second-order model, respectively. The thermodynamic studies show that the adsorption is an exothermic and spontaneous process. The influence of pH and ionic solution strength on the adsorbents is also investigated. The maximum adsorption capacity can be observed at pH value of ca. 8. The adsorption capacities of nicotine are decreased upon the increase of sodium ion concentration. Among all the adsorbents, the defective GO-COOH adsorbents possess the maximum adsorption capacity of nicotine of 196.5 mg g^-1 obtained from Langmuir isotherm. In regeneration experiments, the defective GO-COOH adsorbents can maintain 95.1% of adsorption capacity after five times of cyclic adsorption-desorption processes. The adsorbents are identified by Fourier transform infrared, ¹³C solid-state magic-angle spinning nuclear magnetic resonance, X-ray photoelectron and Raman spectroscopies to determine the adsorption mechanisms and structure on the adsorbents. It can be deduced that the surpassing performance of defective GO-COOH may be ascribed to the unique adsorption mechanism of defects, the enhanced π-π interaction and cation-π bonding. The highly-efficient and stable features enable the defective GO-COOH a promising adsorbent to eliminate nicotine from water.

Superior adsorption performance of metal-organic-frameworks derived magnetic cobalt-embedded carbon microrods for triphenylmethane dyes

In this work, magnetic Co/C microrods were successfully synthesized using direct carbonization of [Co₃(BTC)₂(H₂O)₁₂] precursors. After the carbonization, the original shape of the precursors was well-maintained, while the magnetic Co nanoparticles were well dispersed in the carbon matrix. The Co/C microrods were used as adsorbents for the adsorption of methyl blue (MB), acid fuchsin (AF), malachite green (MG), rhodamine B (Rh B), methyl orange (MO) and methylene blue (MTB) from their aqueous solutions. The results show that Co/C microrods can selectively adsorb triphenylmethane (TPM) dyes, while the adsorption capacities are about 13960, 11,610 and 4893 mg/g for MB, AF and MG dyes, respectively. The adsorption mechanism can be attributed to π-π interaction forces between the sp² graphitic carbon in Co/C microrods and the triphenyl structure of dyes. In addition, the synthesized magnetic Co/C microrods can be easily removed from water using magnetic separation, and subsequently, regenerated using ethanol treatment.

Design of an enhanced SAT using the graphene-MAR mixture for the removal of 17β-E2 at a demonstration site of Qianjin farm in China

An adsorption-enhanced soil aquifer treatment (SAT) system was designed to reduce the level of estrogens below the threshold stipulated by the standards. The 17β-E2 adsorption by graphene and MARs (H103) was investigated and an optimum amount of graphene and MARs in the mixture was determined using the linear programming. The kinetics and isotherm characteristics of both adsorbents were well described by the Lagergren pseudo-second order and the Freundlich model, respectively. The 17β-E2 adsorption on graphene and H103 was 88% and 70.37%, and the high temperature was beneficial to the 17β-E2 adsorption on graphene while the thermodynamic behaviors of H103 were in direct contrast to that of graphene. The study found that the maximum economic benefits could be achieved when the mass of graphene and H103 in the mixture is 2.79 g and 13.20 kg, respectively.

Graphene oxide papers with high water adsorption capacity for air dehumidification

Graphene oxide (GO) has shown a high potential to adsorb and store water molecules due to the oxygen-containing functional groups on its hydrophilic surface. In this study, we characterized the water absorbing properties of graphene oxide in the form of papers. We fabricated three kinds of graphene oxide papers, two with rich oxygen functional groups and one with partial chemical reduction, to vary the oxygen/carbon ratio and found that the paper with high oxygen content has higher moisture adsorption capability. For the GO paper with reduction, the overall moisture absorbance was reduced. However, the absorbance at high humidity was significantly improved due to direct formation of multilayer water vapor in the system, which derived from the weak interaction between the adsorbent and the adsorbate. To demonstrate one application of GO papers as a desiccant, we tested grape fruits with and without GO paper. The fruits with a GO paper exhibited longer-term preservation with delayed mold gathering because of desiccation effect from the paper. Our results suggest that GO will find numerous practical applications as a desiccant and is a promising material for moisture desiccation and food preservation.

Advanced Nanomaterials for the Removal of Chemical Substances and Microbes From Contaminated and Waste Water

The development of cost-effective, efficient and stable materials helps to provide the affordable solutions to get safe and fresh water to increasing population with health guidelines of emerging contaminants. Nanomaterials (NMs)-based techniques involve the design, synthesis, manipulation, characterization and exploitation of materials for adsorption and separation of target species from the contaminated and waste water. NMs show better adsorption capacity and catalytic for number chemical species and microbes because of their small size and large surface area that favors the purification and treatment of waste or contaminated environmental water. Here, we present the chemical properties, adsorption/removal mechanism and applications of advanced NMs such as magnetic nanoparticles (MNPs), carbon nanotubes (CNTs), graphene and graphene oxide (GO), titanium oxide (TiO2), silica (SiO2), silver (Ag), gold (Au) NPs and zeolites in effective and efficient removal of toxic metal ions, organic and inorganic chemical substances and disease-causing microbes from contaminated and wastewater.

A novel graphene oxide coated biochar composite: synthesis, characterization and application for Cr(vi) removal

In the current work, a graphene oxide coated water hyacinth biochar composite (WHB-GO) was synthesized to remove Cr(vi) from aqueous solution.

Magnetic graphene-carbon nanotube iron nanocomposites as adsorbents and antibacterial agents for water purification

One of the biggest challenges of the 21st century is to provide clean and affordable water through protecting source and purifying polluted waters. This review presents advances made in the synthesis of carbon- and iron-based nanomaterials, graphene-carbon nanotubes-iron oxides, which can remove pollutants and inactivate virus and bacteria efficiently in water. The three-dimensional graphene and graphene oxide based nanostructures exhibit large surface area and sorption sites that provide higher adsorption capacity to remove pollutants than two-dimensional graphene-based adsorbents and other conventional adsorbents. Examples are presented to demonstrate removal of metals (e.g., Cu, Pb, Cr(VI), and As) and organics (e.g., dyes and oil) by grapheme-based nanostructures. Inactivation of Gram-positive and Gram-negative bacterial species (e.g., Escherichia coli and Staphylococcus aureus) is also shown. A mechanism involving the interaction of adsorbents and pollutants is briefly discussed. Magnetic graphene-based nanomaterials can easily be separated from the treated water using an external magnet; however, there are challenges in implementing the graphene-based nanotechnology in treating real water.