Calcium-alginate/carbon nanotubes/TiO2 composite beads for removal of bisphenol A

Progresses in lignin, cellulose, starch, chitosan, chitin, alginate, and gum/carbon nanotube (nano)composites for environmental applications: A review

Water sources are becoming increasingly scarce, and they are contaminated by industrial, residential, and agricultural waste-derived organic and inorganic contaminants. These contaminants may pollute the air, water, and soil in addition to invading the ecosystem. Because carbon nanotubes (CNTs) can undergo surface modification, they can combine with other substances to create nanocomposites (NCs), including biopolymers, metal nanoparticles, proteins, and metal oxides. Furthermore, biopolymers are significant classes of organic materials that are widely used for various applications. They have drawn attention due to their benefits such as environmental friendliness, availability, biocompatibility, safety, etc. As a result, the synthesis of a composite made of CNT and biopolymers can be very effective for a variety of applications, especially those involving the environment. In this review, we reported environmental applications (including removal of dyes, nitro compounds, hazardous materialsو toxic ions, etc.) of composites made of CNT and biopolymers such as lignin, cellulose, starch, chitosan, chitin, alginate, and gum. Also, the effect of different factors such as the medium pH, the pollutant concentration, temperature, and contact time on the adsorption capacity (AC) and the catalytic activity of the composite in the reduction or degradation of various pollutants has been systematically explained.

Monitoring of infection volatile markers using CMOS-based luminescent bioreporters

Over the past two decades, whole-cell biosensors (WCBs) have been widely used in the environmental field, with only few applications proposed for use in agricultural. This study describes the development and optimization of a WCB for the detection of volatile organic compounds (VOCs) that is produced specifically by infected potato tubers. First, the effect of calcium-alginate matrix formation (beads vs. tablets) on the membrane uniformity and sensing efficiency was evaluated. Then, important parameters in the immobilization process were examined for their effect on the sensitivity to the presence of VOCs. The highest sensitivity to the target VOC was obtained by 20 min polymerization of bacterial suspension with optical density of 0.2 at 600 nm, dissolved in low-viscosity sodium alginate (1.5% w/v) and exposure to VOC at 4 °C. After optimization, the lowest limit of detection for three infection-sourced VOCs (nonanal, 3-methyl-1-butanol, and 1-octen-3-ol) was 0.17-, 2.03-, and 2.09-mg/L, respectively, and the sensor sensitivity was improved by 8.9-, 3.1- and 2-fold, respectively. Then, the new optimized immobilization protocol was implemented for the CMOS-based application, which increased the sensor sensitivity to VOC by 3-fold during real-time measurement. This is the first step in creating a sensor for real-time monitoring of crop quality by identifying changes in VOC patterns.

Lanthanide recovery by silica-Cyanex 272 material immobilized in alginate matrix

Mesoporous silica impregnate with Cyanex 272 (bis/2,4,4-trimethylpentyl/phosphinic acid) extractant was immobilized into an alginate matrix to obtain a composite sorbent easy to use and applicable in fixed-bed column continuous systems. The sorption efficiency of this material was tested for the recovery of Eu(III) ions from aqueous solutions in batch and continuous mode. The competition among rare earths ions (europium, lanthanum, and lutetium) and among rare earths and calcium or sodium ions was investigated. High calcium concentrations strongly reduce the sorption capacity of the alginate matrix that composes the hybrid material and the Cyanex 272 impregnated into silica powder improves the rare earths' sorption performance in this calcium charged media. The experimental breakthrough curves obtained were satisfactory fitted by Thomas model.

A "signal-on" chemiluminescence biosensor for thrombin detection based on DNA functionalized magnetic sodium alginate hydrogel and metalloporphyrinic metal-organic framework nanosheets

A "signal-on" chemiluminescence biosensor was established for detecting thrombin. The thrombin aptamer1-functionalized magnetic sodium alginate (Malg-Apt1) hydrogel was synthesized by physical interaction between sodium alginate and Ca²⁺, and it was used in the biosensor for separating and enriching thrombin. Ethylenediamine tetraacetic acid (EDTA) was used to chelate with Ca²⁺ to dissolve the hydrogel and release thrombin. A metalloporphyrinic metal-organic framework nanosheet, named as Cu-TCPP(Co) MOFs, was prepared as signal amplification strategy. Cu-TCPP(Co) MOFs/Au-ssDNA (ssDNA: single-strand DNA) was synthesized for controllable further amplification of chemiluminescent signal. The thrombin aptamer2-functionalized magnetic carbon nanotubes (MCNTs-Apt2) were used as a matrix, and Cu-TCPP(Co) MOFs/Au-ssDNA was adsorbed on the MCNTs by the complementary pairing of the partial bases between ssDNA and Apt2. Compared with ssDNA, Apt2 has a stronger interaction with thrombin. Therefore, thrombin can trigger the release of Cu-TCPP(Co) MOFs/Au-ssDNA to achieve signal amplification. Under the optimal conditions, the biosensor could detect thrombin as low as 2.178 × 10^-13 mol/L with the range from 8.934 × 10^-13 to 5.956 × 10^-10 mol/L and exhibited excellent selectively. Moreover, the "signal-on" chemiluminescence biosensor showed potential application for the detection of thrombin in body fluids.

Probing the toxicity mechanism of multiwalled carbon nanotubes on bacteria

Carbon nanotubes (CNTs) have emerged recently as superior adsorbent materials for the removal of recalcitrant pollutants. The potential of combining the sorption capability of CNTs with bacterial degradation for pollutant removal, however, necessitates further investigation of the mechanisms of CNTs' toxicity towards bacterial cells. In this study, we used a panel of stress-responsive recombinant Escherichia coli bioluminescence bacterial strains to explore the possible mechanisms of toxicity of multiwalled carbon nanotubes (MWCNTs). The effects of MWCNTs on markers of oxidative stress, protein, DNA, and membrane damage enabled the exposition of some of the mechanisms of their antimicrobial properties. Using both a bioluminescence bioreporter panel and live/dead staining, we observed that membrane damage played a role in the toxicity of MWCNTs. A subsequent viability study using three strains of bacteria-two gram-negative (Escherichia coli, Pseudomonas aeruginosa) and one gram-positive (Bacillus subtilis)-showed significant MWCNT toxicity in hypotonic water and phosphate-buffered saline solution, compared with the MWCNT toxicity towards the same bacteria incubated in isotonic-rich media. Using a field-emission scanning electron microscope, we demonstrated that membrane damage is caused largely by MWCNTs trapping bacteria and piercing the cell walls. As a result of our observations, we propose integrating MWCNTs and bacteria degradation for pollutant removal in nutrient-rich media to minimize the toxicity effect of CNTs.