A comparative treatment of bleaching wastewater by physicochemical processes

Unraveling the shift in bacterial communities profile grown in sediments co-contaminated with chlorolignin waste of pulp-paper mill by metagenomics approach

Pulp-paper mills (PPMs) are known for consistently generating a wide variety of pollutants, that are often unidentified and highly resistant to environmental degradation. The current study aims to investigate the changes in the indigenous bacterial communities profile grown in the sediment co-contaminated with organic and inorganic pollutants discharged from the PPMs. The two sediment samples, designated PPS-1 and PPS-2, were collected from two different sites. Physico-chemical characterization of PPS-1 and PPS-2 revealed the presence of heavy metals (mg kg-1) like Cu (0.009-0.01), Ni (0.005-0.002), Mn (0.078-0.056), Cr (0.015-0.009), Pb (0.008-0.006), Zn (0.225-0.086), Fe (2.124-0.764), Al (3.477-22.277), and Ti (99.792-45.012) along with high content of chlorophenol, and lignin. The comparative analysis of organic pollutants in sediment samples using gas chromatography-mass spectrometry (GC-MS) revealed the presence of major highly refractory compounds, such as stigmasterol, β-sitosterol, hexadecanoic acid, octadecanoic acid; 2,4-di-tert-butylphenol; heptacosane; dimethyl phthalate; hexachlorobenzene; 1-decanol,2-hexyl; furane 2,5-dimethyl, etc in sediment samples which are reported as a potential toxic compounds. Simultaneously, high-throughput sequencing targeting the V3-V4 hypervariable region of the 16S rRNA genes, resulted in the identification of 1,249 and 1,345 operational taxonomic units (OTUs) derived from a total of 115,665 and 119,386 sequences read, in PPS-1 and PPS-2, respectively. Analysis of rarefaction curves indicated a diversity in OTU abundance between PPS-1 (1,249 OTUs) and PPS-2 (1,345 OTUs). Furthermore, taxonomic assignment of metagenomics sequence data showed that Proteobacteria (55.40%; 56.30%), Bacteoidetes (11.30%; 12.20%), and Planctomycetes (5.40%; 4.70%) were the most abundant phyla; Alphproteobacteria (20.50%; 23.50%), Betaproteobacteria (16.00%; 12.30%), and Gammaproteobacteria were the most recorded classes in PPS-1 and PPS-2, respectively. At the genus level, Thiobacillus (7.60%; 4.50%) was the most abundant genera grown in sediment samples. The results indicate significant differences in both the diversity and relative abundance of taxa in the bacterial communities associated with PPS-2 when compared to PPS-1. This study unveils key insights into contaminant characteristics and shifts in bacterial communities within contaminated environments. It highlights the potential for developing efficient bioremediation techniques to restore ecological balance in pulp-paper mill waste-polluted areas, stressing the importance of identifying a significant percentage of unclassified genera and species to explore novel genes.

Recent advances in the treatment of lignin in papermaking wastewater

More than 695.7 million m³ of papermaking wastewater is discharged globally. It contains a mixture of complex pollutants, of which lignin is the major constituent (600-1000 mg/L) of papermaking black liquor, making it the second-largest energy-containing biomass globally and accounting for 47.4% and 59.4% of chemical oxygen demand (16,400 ± 120 mg/L) and chroma (3100 ± 22.32 mg/L) of papermaking wastewater. The complex process and dissolved pollutants are responsible for high pH, biochemical oxygen demand, chemical oxygen demand, total suspended solids, dark color, and toxicity. Papermaking wastewater has emerged as a substantial source of environmental pollution as the conventional wastewater treatment processes are high cost and seldom efficacious. This work introduces the shortcomings of the common treatment methods for papermaking wastewater and lignin, focusing on lignin biodegradation and discussing the metabolic pathways and application prospects of lignin-degrading microbial species. A comprehensive review of the existing lignin treatment methods has proposed that the reasonable amalgamation of biodegradation and various physicochemical techniques are environmentally friendly, sustainable, and economical. Lignin extraction from papermaking wastewater by technology combination is an effective approach to recover valuable organic materials and detoxify wastewater. This review focuses on recent breakthroughs and future trends in papermaking wastewater treatment and lignin removal, with special emphasis on biodegradation, recovery, and utilization of lignin, providing guidance for the mechanism exploration of lignin-degrading microorganisms and the optimization of high-value chemical production.

Sustainable Alternatives for Tertiary Treatment of Pulp and Paper Wastewater

In this work, different alternatives to conventional tertiary treatment of pulp and paper (P&P) wastewater (WW), i.e., physicochemical coagulation-flocculation, were investigated to enhance the environmental and economic sustainability of industrial wastewater treatment. In particular, following a preliminary characterization of secondary effluents, cloth filtration and adsorption were studied, the former by pilot-scale tests, while the latter at laboratory scale. An economic analysis was finally accomplished to verify the full-scale applicability of the most promising technologies. Cloth filtration showed excellent total suspended solids (TSS) removal efficiency (mean 81% removal) but a very limited influence on chemical oxygen demand (COD) (mean 10% removal) due to the prevalence of soluble COD on particulate COD. Adsorption, instead, led to a good COD removal efficiency (50% abatement at powdered activated carbon—PAC—dosage of 400 mg/L). The economic analysis proved that adsorption would be convenient only if a local low-cost (100 €/ton) adsorbent supply chain was established. Ultrafiltration was considered as well as a potential alternative: its huge capital cost (19 M€) could be recovered in a relatively short timeframe (pay-back time of 4.7 years) if the ultrafiltrated effluent could be sold to local industries.

Performance of photo-catalytic oxidation for degradation of chlorophenols: Optimization of reaction parameters and quantification of transformed oxidized products

In a pulp and paper mill, chlorine bleaching of pulp generates toxic aqueous stream containing various chlorophenols (CPs) which are not removed easily by biological process. The objective of the study was to optimize photo-catalytic oxidation reaction for synthetic wastewater containing mixture of mono-, di-, tri- and penta-CPs (i.e., 4-CP; 2,4-DCP; 2,4,6-TCP, and PCP) and evaluate its performance for simulated bleaching effluents produced during pulp bleaching stages. The experimental runs were performed in a glass reactor (capacity = 500 ml) with UV lamp (200-390 nm). A maximum TOC reduction of 93% was achieved for synthetic wastewater (initial TOC = 42 mg/L) at the following conditions: pH = 4.4 (unadjusted), H₂O₂ dose = 6.8 mM (stoichiometric), [H₂O₂]:[Fe²⁺] = 65 and run time = 37 min. Under these conditions, ∼90% of the chlorine atoms were dissolved as chloride ions in the treated wastewater. High performance liquid chromatography analysis on liquid samples extracted during the oxidation reaction revealed no accumulation of carboxylic acids in treated wastewater. At similar operating conditions, TOC removal from simulated bleaching effluent was 78% during photo-catalytic process compared to ∼50% obtained after Fenton's oxidation.