Optimization of sulfate removal from wastewater using magnetic multi-walled carbon nanotubes by response surface methodology

Novel composites of activated carbon and layered double oxide for the removal of sulfate from synthetic and brackish groundwater

Sulfate (SO42-) is a major water and environmental concern that causes severe diarrhea, death of invertebrates and plant species, and clogging of industrial pipes. In the current work, treatment of SO42- from synthetic and real groundwater having 3901 mg(SO42-)/L was investigated for the first time using Zn-Al and Mg-Al layered double oxides doped granular activated carbon (GAC/Mg-Al LDO and GAC/Zn-Al LDO). The co-precipitation method was followed to synthesize the GAC/LDO composites using an Mg or Zn to Al molar ratio of 3:1. The GAC/Mg-Al LDO possessed a higher specific surface area (323.9 m2/g) compared to GAC/Zn-Al LDO (195.1 m2/g). The GAC/Mg-Al LDO demonstrated more than 99% removal of SO42- from synthetic water, while it was 50.9% for GAC/Zn-Al LDO and less than 1% for raw GAC at an initial concentration of 50 mg/L. The GAC/Mg-Al LDO was selected for further batch experiments and modeling investigation. The equilibrium data followed the Redlich-Peterson and Langmuir models with determination coefficients of 0.943 and 0.935, respectively. The maximum Langmuir adsorption capacity was 143.5 mg/g. In the real groundwater adsorption study, the screening experiment revealed high selectivity towards SO42- with 62% removal efficiency. The optimum dosage was found to be 50 g/L with an uptake capacity of 61.5 mg/g. The kinetic data of SO42- removal from synthetic and brackish water were in excellent agreement with the pseudo-second order model, and the equilibrium was attained in 5 h. Accordingly, it can be concluded that the GAC/Mg-Al LDO is an efficient material for treating SO42- from real groundwater and can be utilized as a pretreatment unit for high sulfate water resources.

Sulfate and phosphate ions removal using novel nano-adsorbents: modeling and optimization, kinetics, isotherm and thermodynamic studies

Many compounds containing sulfur and phosphorous are present in wastewater of various industries like food processing, paper making, etc. The higher level of phosphate and sulfate ions causes many problems in everyday life. Based on this, nickel monometallic and nickel-cobalt bimetallic nanoparticles were synthesized using leaves extract of Coix lacryma-jobi L. and applied for sulfate and phosphate ions removal. UV-Vis. spectroscopy, fourier transformed infrared spectroscopy; scanning electron microscopy; X-ray diffraction, and energy-dispersive X-ray spectroscopy were used as characterizing techniques for synthesized nanoparticles. UV spectra for Ni nanoparticles showed the absorption band in the 380-400 nm range, while for Ni-Co bimetallic nanoparticles was noticed at 396 nm and 513 nm. Different functional groups were observed in FTIR spectra of leaves extract which acted as reducing and capping agents to form stable NPs. Different factors like adsorbent dosage, pH, temperature, adsorbate concentration, and time were optimized for maximum removal of sulfate and phosphate anions. The antioxidant potential of prepared nanoparticles was assessed by three different methods. The kinetics, thermodynamics, and adsorption isotherms were also studied for these ions removal. In the current study, the green approach was easy, time-saving and proved to be beneficial to remove sulfate and phosphate anions from wastewater.

Phosphorus and sulphates removal from wastewater using copper smelter slag washed with acid

Abstract

In this study, we present the performance of acid washed copper smelter slag for the adsorption of phosphates and sulphates from wastewater. The aim of the study was to investigate the removal of phosphates and sulphates from wastewater using acid washed copper smelter slag at batch scale by exploring influences of different variables. The leachate concentrations of copper, iron, manganese and lead released from the adsorbent were 1.8, 128.2, 0.32 and 0.20 mg L−1, respectively at pH 2. The point of zero charge was at pH 6.04, Pseudo-Second Order kinetic model described the adsorption process better with an R2 value of 0.99. The experimental maximum adsorption capacities for phosphates and sulphates were 0.51 and 0.24 mg g−1 media, respectively, and 0.96 mg P g−1 media at pH 12 and 0.39 mg g−1 media for sulphates at pH 2, respectively. The process was endothermic with temperature having insignificant impact during adsorption. The maximum adsorption capacities for thermodynamic study were 0.103 ± 0.09 and 0.046 ± 0.004 mg g−1 media respectively, for PO43− P and SO42− at 60 °C. This study showed that acid washed copper smelter slag has an improved adsorption capacity for phosphate and sulphate ions but further investigations should be conducted to find ways of further improving the adsorbent performance.

Article highlights

Enhanced adsorption and reduction performance of nitrate by Fe-Pd-Fe3O4 embedded multi-walled carbon nanotubes

Multi walled carbon nanotubes (MWCNTs) have attracted more and more attention as adsorbents due to their excellent adsorption properties. By loading metal particles on MWCNTs, the chemical reduction ability of adsorbed pollutants could be provided, so as to achieve the purpose of adsorption and degradation of pollutants. Therefore, the removal process of NO₃^--N by Fe-Pd-Fe₃O₄/MWCNTs was studied, including rapid adsorption of initial pollutants, gradual reduction of intermediate products and re-adsorption of final products. The results showed that Fe-Pd-Fe₃O₄/MWCNTs completely removed NO₃^--N within 2 h, 39% and 25% of which were converted into NO₂^--N and NH₄⁺-N. The adsorption efficiency, kinetics, capacity and adsorption energy all followed the order of NH₄⁺-N > NO₂^--N > NO₃^--N. With the recoverability and reusability of Fe-Pd-Fe₃O₄/MWCNTs having been confirmed in 5 consecutive cycles, the removal rate of NO₃^--N still reached 43%. It has been shown that MWCNTs prolonged the reducing power for NO₃^--N, due to avoiding the aggregation of metal particles. The rapid adsorption of initial pollutants, effective stepwise reduction and convenient recovery processes were of great value for the rehabilitation of polluted water.

Sorption, mechanism, and behavior of sulfate on various adsorbents: A critical review

Sulfate decontamination has drawn widespread attention due to its harmful effects by broad human and animal exposure in recent decades. Adsorption is one of the most promising methods for sulfate decontamination. This review categorized various sulfate adsorbents, discussed the adsorption behavior, and introduced effective adsorbents in detail in terms of their preparation, characterization, and affecting factors on adsorption efficiency. Moreover, adsorption mechanisms of sulfate on different adsorbents are reviewed based on the intermolecular interaction, equilibrium, thermodynamic, and kinetic studies. Among natural bioadsorbents, synthesized-organic, and synthesized-inorganic adsorbents chitin-based shrimp shells (156 mg/g), bagasse pith cellulose-based (526.32 mg/g), and ZrO(OH)₂/Y-Zeolite (284.22 mg/g) showed the significant capacity for sulfate uptake from aqueous solution, respectively. Although natural adsorbents have been proved to be inexpensive and efficient, they are not as popular as synthesized adsorbents for sulfate decontamination in recent years due to their low recoverability and reusability. The adsorption mechanism of sulfate to various adsorbents is generally attributed to electrostatic interactions, covalent or ionic bonding, and hydrogen bonding. Based on equilibrium studies, sulfate adsorption processes were done mainly homogeneously for most of the adsorbents; however, there are some exceptions of the heterogeneous adsorption process of sulfate, which is done mostly for adsorbents that remove sulfate through hydrogen and covalent bonding. The kinetic studies illustrated that both film diffusion and pore-diffusion could control sulfate uptake by the various adsorbents. The thermodynamic studies showed that the sulfate adsorption is endothermic and spontaneous except for the sulfate removal by polypyrrole-modified activated-carbons and LDH-HPI mine waste, which requires energy for adsorption.

Magnetic Fe3O4/multi-walled carbon nanotubes materials for a highly efficient depletion of diclofenac by catalytic wet peroxideoxidation

The aim of this work is to synthesize a magnetic magnetite/multi-walled carbon nanotube (Fe₃O₄/MWCNT) catalyst by a method combining co-precipitation and hydrothermal treatments for the efficient removal of diclofenac (DCF) by catalytic wet peroxide oxidation (CWPO). The support (MWCNTs) shows a moderate-large surface area and good adsorption capacity, leading to the improvement of the magnetite (Fe₃O₄) dispersion on its surface. The response surface methodology (RSM) was applied in order to find out the effect of the reaction parameters on DCF removal, allowing to establish the optimum operating conditions (T = 60 °C, [H₂O₂]₀ = 2.7 mM, [catalyst] = 1.0 g L^-1). The optimum CWPO experiment showed an outstanding catalytic activity at non-modified pH solution (6.7), obtaining a 95% of DCF removal after 3 h reaction time; this high efficiency can be attributed to the synergistic effect of the iron-based catalyst with the high quantity of ^•OH radicals generated on the surface of the catalyst. In addition, the Fe₃O₄/MWCNT material exhibited good reusability along three consecutive reaction cycles, finding a pollutant removal close to 95% in each cycle of 3 h reaction time. Additionally, a degradation mechanism pathway was proposed for the removal of DCF by CWPO. The versatility of the material was finally demonstrated in the treatment of different environmentally relevant aqueous matrices (a wastewater treatment plant effluent, surface water, and hospital wastewater), obtaining an effective reduction in the ecotoxicity values.

Highly efficient Cd(II) adsorption using mercapto-modified bentonite as a novel adsorbent: an experimental design application based on response surface methodology for optimization

We report the optimization with response surface methodology (RSM) for adsorption conditions required for removal of Cd(II) from an aqueous environment with 3-mercaptopropyl trimethoxysilane-modified bentonite (MMB). Central composite design (CCD) in RSM was used to optimize the most significant adsorption variables of initial pH, temperature (°C), initial Cd(II) concentration (C_o, mg L^-1) and adsorbent dosage (g). With the quadratic model equation obtained from CCD, the optimum values were determined as initial pH 6.40, temperature 20 °C, C_o 49.55 mg L^-1 and adsorbent dosage 0.17 g. Under optimum conditions, the optimum adsorption amount of Cd(II) was 27.55 mg Cd(II)/g adsorbent and adsorption yield was 94.52%. The obtained results showed that the Langmuir and Dubinin Radushkevich (D-R) adsorption isotherms were more suitable for adsorption equilibrium data. The kinetic studies indicated that the pseudo-second-order kinetic model was fitted to the adsorption kinetic data. Additionally, thermodynamic studies indicated that the adsorption process was spontaneous and exothermic. As a result, MMB can be chosen as an effective adsorbent for treating heavy metals such as Cd(II) in wastewater and removing them from aqueous solutions. Furthermore, it is thought that it will positively contribute to the literature since the adsorbent-adsorbate combination (MMB-Cd(II)) is used for the first time.