Modified xanthan gum for crystal violet uptake: kinetic, isotherm, and thermodynamic behaviors

Advances in gum-based hydrogels and their environmental applications

Gum-based hydrogels (GBHs) have been widely employed in diverse water purification processes due to their environmental properties, and high absorption capacity. More desired properties of GBHs such as biodegradability, biocompatibility, material cost, simplicity of manufacture, and wide range of uses have converted them into promising materials in water treatment processes. In this review, we explored the application of GBHs to remove pollutants from contaminated waters. Water resources are constantly being contaminated by a variety of harmful effluents such as heavy metals, dyes, and other dangerous substances. A practical way to remove chemical waste from water as a vital component is surface adsorption. Currently, hydrogels, three-dimensional polymeric networks, are quite popular for adsorption. They have more extensive uses in several industries, including biomedicine, water purification, agriculture, sanitary products, and biosensors. This review will help the researcher to understand the research gaps and drawbacks in this field, which will lead to further developments in the future.

Selective adsorption and separation of methylene blue by facily preparable xanthan gum/amantadine composites

In this work, xanthan gum-based composites were successfully graft-modified by amantadine (XG-Fe³⁺/AM) with higher adsorption capacity and selectivity on recycling cationic dye (methylene blue, MB) from aqueous solution. The adsorption equilibrium of MB could be achieved approximately within 5 min when the initial concentration was 100 mg/L, and the maximum adsorption capacity was up to 565 mg/g. After 5 desorption-regeneration cycles, the removal rate of XG-Fe³⁺/AM for MB could still be as high as 95 % with slight decrement. Additionally, the effects of pH, contact time, temperature and initial dye concentration on the adsorption performance of MB were systematically examined. Furthermore, the adsorbent was characterized by FT-IR, BET and XPS analysis. In mixed anionic and cationic dyes, the adsorption selectivity of XG-Fe³⁺/AM on MB in the mixture of MB and methyl orange (MO) reached up to 99.69 %. Molecular dynamics simulation revealed that the trend of adsorption energy for dyes was in good agreement of the experimental order of adsorption capacities and molecular sizes among seven anionic and cationic dyes based on molecular matching effect and electrostatic interaction. Therefore, XG-Fe³⁺/AM is an eco-friendly, facile-synthesis and high-selectivity adsorbent, which remove cationic dyes in multi-component systems through electrostatic interaction and molecular matching effect.

Modified xanthan gum for methyl orange uptake: Kinetic, isotherm, and thermodynamic behaviors

A novel hydrogel, named XGTTE, was prepared by modification of acrylamide and trimethylolpropane triglycidyl ether (TTE) on xanthan gum (XG). XGTTE was utilized as an adsorbent to remove methyl orange (MO) from an aqueous solution. Functional groups present in the external surface of XGTTE, such as carboxyl, hydroxyl, and amino groups, were identified, and these functional groups are responsible for the occurrence of the mechanism for MO adsorption. The structure of XGTTE after MO adsorption became more disordered. The adsorption dynamics and isotherms of MO onto XGTTE conformed well to the pseudo-second-order kinetics and the Freundlich equation, indicated that the adsorption included physical and chemical adsorption, with electrostatic interaction and hydrogen-bonding interaction. The calculated values of the thermodynamic parameters, such as changes in enthalpy (ΔH) and entropy (ΔS) were 27.30 kJ/mol and 125.63 J/mol/K, respectively. The changes in free energy (ΔG) were - 9.53 kJ/mol (293.15 K), -10.16 kJ/mol (298.15 K), -10.78 kJ/mol (303.15 K), -11.41 kJ/mol (308.15 K), and - 12.04 kJ/mol (313.15 K), respectively, indicating the adsorption process is endothermic, spontaneous, and entropic. The maximum adsorption capacities of XGTTE2, XGTTE3, XGTTE4, XGTTE5, and XGTTE6 for MO were 18.62 ± 0.99, 21.92 ± 0.84, 28.60 ± 0.84, 29.56 ± 0.99, and 12.38 ± 0.84 mg/g, respectively.

Preparation and characterization of a novel Fe3O4-graphene-biochar composite for crystal violet adsorption

A novel Fe₃O₄-graphene-biochar composite (GBC-Fe₃O₄) was prepared to enhance the adsorption capacity and recollection efficiency of graphene-biochar composites (GBCs). The adsorption characteristics were tested to remove crystal violet (CV), which is a refractory compound in industrial wastewater. Structural and morphological analysis exhibited that a larger surface area, greater thermal stability, and more functional groups were present after Fe₃O₄ nanoparticles coated the GBC surface. This improved the CV adsorption versus uncoated GBC. The introduction of G and Fe₃O₄ nanoparticles collectively reduced the zeta potentials of GBC-Fe₃O₄ to -38.1 ± 1.1 mV versus -24.3 ± 2.2 mV for GBC and -20.7 ± 1.2 mV for BC. The maximum Q_max values were obtained 436.68 mg/g at 40 °C. Fourier transform infrared analysis suggested that the interactions of functional groups, such as aromatic C = C and C = O, -OH, C-C, and π-π played an important role in CV adsorption. The thermodynamic analysis of Langmuir and Freundlich isotherms indicated that the adsorption improved as a spontaneous endothermic process. The saturation magnetization of GBC-Fe₃O₄ reached 61.48 emu/g, allowing efficient recollection of the material with a magnet. The CV adsorbability of the re-collected GBC-Fe₃O₄ was 157.31 mg/g, which was slightly lower than freshly prepared GBC-Fe₃O₄ (199 mg/g). These findings demonstrated that GBC-Fe₃O₄ was an efficient and reusable multifunctional biochar.