Coconut shell derived ZnCl2 activated carbon for malachite green dye removal

Mesoporous activated carbon derived from fruit by-product by pyrolysis induced chemical activation: optimization and mechanism for fuchsin basic dye removal

In this study, pineapple crown (PC) feedstock residues were utilized as a potential precursor toward producing activated carbon (PCAC) via pyrolysis induced with ZnCl2 activation. The PCAC has a surface area (457.8 m2/g) and a mesoporous structure with an average pore diameter of 3.35 nm, according to the Brunauer-Emmett-Teller estimate. The removal of cationic dye (Fuchsin basic; FB) was used for investigating the adsorption parameters of PCAC. The optimization of significant adsorption variables (A: PCAC dose (0.02-0.1 g/100 mL); B: pH (4-10); C: time (10-90); and D: initial FB concentration (10-50 mg/L) was conducted using the Box-Behnken design (BBD). The pseudo-second-order (PSO) model characterized the dye adsorption kinetic profile, whereas the Freundlich model reflected the equilibrium adsorption profile. The maximum adsorption capacity (qmax) of PCAC for FB dye was determined to be 171.5 mg/g. Numerous factors contribute to the FB dye adsorption mechanism onto the surface of PCAC, which include electrostatic attraction, H-bonding, pore diffusion, and π-π stacking. This study illustrates the utilization of PC biomass feedstock for the fabrication of PCAC and its successful application in wastewater remediation.

High surface area activated carbon from a pineapple (ananas comosus) crown via microwave-ZnCl2 activation for crystal violet and methylene blue dye removal: adsorption optimization and mechanism

In this investigation, microwave irradiation assisted by ZnCl2 was used to transform pineapple crown (PN) waste into mesoporous activated carbon (PNAC). Complementary techniques were employed to examine the physicochemical characteristics of PNAC, including BET, FTIR, SEM-EDX, XRD, and pH at the point-of-zero-charge (pHpzc). PNAC is mesoporous adsorbent with a surface area of 1070 m2/g. The statistical optimization for the adsorption process of two model cationic dyes (methylene blue: MB and, crystal violet: CV) was conducted using the response surface methodology-Box-Behnken design (RSM-BBD). The parameters include solution pH (4-10), contact time (2-12) min, and PNAC dosage (0.02-0.1 g/100 mL). The Freundlich and Langmuir models adequately described the dye adsorption isotherm results for the MB and CV systems, whereas the pseudo-second order kinetic model accounted for the time dependent adsorption results. The maximum adsorption capacity (qmax) for PNAC with the two tested dyes are listed: 263.9 mg/g for CV and 274.8 mg/g for MB. The unique adsorption mechanism of MB and CV dyes by PNAC implicates multiple contributions to the adsorption process such as pore filling, electrostatic forces, H-bonding, and π-π interactions. This study illustrates the possibility of transforming PN into activated carbon (PNAC) with the potential to remove two cationic dyes from aqueous media.

Deep eutectic solvent-treated palm oil mill sludge adsorbents for methylene blue adsorption

This study evaluated the adsorptive properties of deep eutectic solvent (DES)-treated palm oil mill sludge adsorbents for methylene blue removal. The adsorbents were prepared at a ratio of 1:2 at 80°C to form P1:D2@80°C, at 25°C to form P1:D2@25°C and without DES to form dry sludge (DS). The adsorbent samples were characterized for surface functional groups, textural properties and surface morphology. The values of specific area were 534, 236 and 184 m2/g, respectively. Batch adsorption of methylene blue at varying concentration, adsorbent dosage, pH, contact time and temperature was performed. The maximum adsorption capacities by Sips model were recorded as 72.07, 56.18 and 48.33 mg/g for P1:D2@80°C, P1:D2@25°C and DS, respectively. P1:D2@80°C displayed the highest rate constant (Ks = 0.0037 g/mg.min). The adsorption data were well fitted into Sips isotherm and pseudo-second-order kinetic models, suggesting that the adsorption is a physical process onto heterogeneous adsorbent surface via pore filling and electrostatic attraction. The adsorption was spontaneous, feasible and exothermic with decreased disorderliness in the solid-bulk solution interface. The DES-treated palm oil mill sludge adsorbent is a promising alternative adsorbent for dye removal from wastewater.

Vitex doniana seed activated carbon for methylene blue adsorption: equilibrium and kinetics

This study evaluated the characteristics of zinc chloride modified vitex doniana seed activated carbon (VDZnCl2) for the removal of methylene blue. VDZnCl2 was characterized for textural properties, surface morphology and surface chemistry. Batch adsorption of methylene blue by VDZnCl2 was evaluated for the effects of concentration, contact time, adsorbent dosage, and solution pH. The surface area increased from 14 to 933 m2/g with porous texture to facilitate adsorption. The SEM micrograph showed varieties of pores with widened cavities. The FTIR spectra showed the characteristics of O-H and C=C groups commonly found in carbonaceous materials. The maximum methylene blue adsorption was recorded as 238 mg/g at concentration range of 1-800 mg/L and VDZnCl2 dosage of 50 mg. Sips isotherm fitted well with the equilibrium data, suggesting that the adsorption by VDZnCl2 was a physical process onto its heterogeneous surface, while the applicability of pseudo-first-order kinetics implies that external diffusion was the rate controlling mechanism. The performance put up by VDZnCl2 suggested that it is a potential adsorbent substitute for dye wastewater treatment.

Towards a win-win chemistry: extraction of C.I. orange from Kamala fruit (Mallotus philippensis), and simultaneous exercise of its peels for the removal of Methylene Blue from water

Kamala fruit (Mallotus philippensis), hereinafter MP, has been simultaneously exercised for the extraction of a natural dye, C.I. orange and its peels were converted into an efficient adsorbent for the rapid removal of methylene blue (MB) dye from aqueous solutions. The material has been characterized by Fourier Transform Infra-red (FTIR),Field Emission Scanning Electron Microscopy- Electron dispersive spectroscopy (FESEM-EDS), Brunauer-Emmett-Teller (BET) surface area, and pH_ZPC. FTIR suggests the presence of polyphenolic moieties responsible for adsorption, whereas FESEM confirms the porous texture. Optimization of process variables such as contact time, pH, adsorbent dose, and temperature of operation indicates that the adsorption gets modulated by the pH, with a best at 11. The Freundlich model (R² = 0.994), and pseudo-second-order kinetics (R² = 0.999) best describe the adsorption pathway. Dilute hydrochloric acid is sufficient to induce >66% regeneration, which ensures reusability. With the maximal uptake for MB is 30.2 mg/g at ambient conditions, the superiority over the existing materials has been confirmed. Treatment of dye containing industrial effluent suggests about a 50% reduction in one cycle. It can be concluded that both-way benefits, namely natural dye extraction and preparation of a peel-based adsorbent for methylene blue removal from aqueous solution, can be achieved using the kamala fruit peels.

Iodine adsorption isotherms on Matamba fruit shell stemmed biochar for wastewater re-use strategy in rural areas owing to climate change

Remote communities in developing countries are facing ever-increasing water scarcities, due to cumulative demand induced by the climate change and global warming impacts. For the socio-economic and health well-being of the local communities, sufficient, efficient, and affordable water supply is fundamental from local-based adsorbents. Matamba Fruit shell was obtained and pyrolyzed to obtain well-transformed biochar, which exhibited enough capacity to remove Iodine from aqueous solution. The maximum capacity of adsorption of the Matamba Fruit shell was 2.122 mmol L^-1 and 2.12 mmol L^-1 from conventional and Bayesian statistics correspondingly. The difference was insignificant. The surface morphology was evaluated by the Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (FESEM-EDX) which revealed porous structures with irregular openings enough to purge wastewater pollutants. The material surface area was 267.0 m² g^-1, as estimated by both approaches, making the Matamba Fruit shell an emerging potential candidate for environmental pollution control and use in bioremediation practices. The Fourier-transform infrared spectroscopy (FTIR) revealed that surface functional groups of Matamba Fruit shell biochar have enough peak variations in intensity and position due to vibration variations of the surface. The Fruit shell has different functional groups including the hydroxyl (-OH) and the carbonyl groups (CO), CC stretches of aromatic rings, and the carboxylate (C-O-O-) groups. The biochar understudy unveiled its capability for wastewater-treatment reuse in local and urban communities of developing countries to safeguard their health and access to water-supply as the climate change reverberations are affecting the developing countries more pronounced than before.

A Facile Review on the Sorption of Heavy Metals and Dyes Using Bionanocomposites

Presently, hazardous metal and dye removal from wastewater is one of the major areas of research focus. For the elimination of these contaminants, many approaches have been devised and applied. However, the accomplishment of various water treatment processes has largely depended on the medium utilized and the associated problem with the leaching of harmful compounds into the water process with most commercial and chemically manufactured materials for water treatment processes. Hence, this study is aimed at reviewing existing studies on the sorption of heavy metals (HMs) and dyes using bionanocomposites (BNCs). The key focus of this review is on the development of eco-friendly, effective, and appropriate nanoadsorbents that could accomplish superior and enhanced contaminant sequestration using BNCs owing to their biodegradability, biocompatible, environmentally friendly, and not posing as secondary waste to the environment. The sorption of most pollutants was observed to be pH, sorbent dosage, and initial contaminant concentration-dependent, with most contaminants’ elimination taking place in the pH range of 2-10. The sorption process of HMs and dyes to various BNCs was superlatively depicted utilizing the Langmuir (LNR) and Freundlich (FL) as well as the pseudo-second-order (PSO) models, suggestive of the sorption process of a monolayer and multilayer and the chemisorption process, the rate-limiting stage in surface sorption. The established sorption capacities for the reviewed sorption process for various contaminants ranged from 1.47 to 740.97 mg/g. Future prospective for the treatment and remediation of contaminated water using BNCs was also discussed.

New low-cost biofilters for SARS-CoV-2 using Hymenachne grumosa as a precursor

The ongoing global spread of COVID-19 (SARS-CoV-2 2019 disease) is causing an unprecedented repercussion on human health and the economy. Despite the primary mode of transmission being through air droplets and contact, the transmission via wastewater is a critical concern. There is a lack of techniques able to provide complete disinfection, along with the uncertainty related to the behavior of SARS-CoV-2 in the natural environment and risks of contamination. This fact makes urgent the research towards new alternatives for virus removal from water and wastewater. Thus, this research aimed to characterize new lost-cost adsorbents for SARS-CoV-2 using Hymenachne grumosa as a precursor and verify its potential for removing SARS-CoV-2 from the solution. The aquatic macrophyte H. grumosa had in natura and activated carbon produced with H. grumosa and zinc chloride (ZnCl_2,1:1) impregnation and carbonization (700 °C, 1 h) were incubated for 24 h with inactivated SARS-CoV-2 viral suspension, and then the ribonucleic acid (RNA) was extracted and viral load quantified through reverse transcription-quantitative polymerase chain reaction (RT-qPCR) technique. The results demonstrated the great adsorption potential, achieving removal of 98.44% by H. grumosa "in natura", and 99.61% by H. grumosa with carbon activation, being similar to commercial activated carbon (99.67%). Thus, this study highlights the possibility of low-cost biofilters to be used for SARS-CoV-2 removal, as an excellent alternative for wastewater treatment or watercourses decontamination.

Alkali treated water chestnut (Trapa natans L.) shells as a promising phytosorbent for malachite green removal from water

Search for eco-friendly adsorbents for sustainable dye treatment is on the rise. The present study demonstrated the enhanced removal of malachite green (MG) with alkali-modified shells of water chestnut (AWCN) under optimized physio-chemical parameters. Alkali treatment significantly reduces the lignocellulosic components which in turn increased the water stability. The material was been characterized by pHzpc, FTIR, FESEM-EDAX, and BET surface area analysis. pH-dependent adsorption was noticed and the maximum adsorption capacity was determined as 136.46 mg/g. Adsorption followed pseudo-second-order kinetics (R²=0.99) and Langmuir isotherm model (R²=0.99). Thermodynamic parameters suggested that the adsorption process is spontaneous (ΔG°= -2.99 kJ/mol), favorable and endothermic (ΔH°=34.72 kJ/mol). Simple regeneration allows multi-cycle use with minimal loss of activity. The mechanism has been proposed to be a combination of electrostatic interaction, H-bonding, and π-π stacking between AWCN and MG. In conclusion, alkali modification of Trapa natans L. shells provides excellent removal of MG from water.

Malachite Green Removal by Activated Potassium Hydroxide Clove Leaf Agrowaste Biosorbent: Characterization, Kinetic, Isotherm, and Thermodynamic Studies

Although several approaches have been explored for the removal of dyes and other toxic materials from water as well as the entire environment, notwithstanding, researchers/scientists are still pursuing novel, low-cost, and eco-friendly biosorbents for the effective removal of such contaminants. Herein, clove leaves (CL) were utilized as a biosorbent for the sequestration of malachite green (MG) from a water-soluble solution. The CL was subsequently activated using potassium hydroxide (KOH) and characterized using the FTIR and FESEM to determine the functional groups on the activated clove leaves (CL-KOH) and the morphology of the adsorbent. The adsorption of MG was observed to be relatively dependent on the dosage of sorbent utilized, initial MG concentration, and sorption process contact time. The adsorption process of MG to CL was ideally described using the Dubinin–Radushkevich and Elovich models with the determination of maximum sorption capacity of approximately 131.6 mg·g-1. Furthermore, the thermodynamic parameters calculated showed that the adsorption of MG to the adsorbent was exothermic with the process involving physical sorption as well as chemical sorption processes with negligible adsorption energy. In conclusion, the study has revealed that the CL is a cost-effective biosorbent with high adsorption efficiency for the sequestration of MG from a water-soluble solution and can be recycled for further usage.