Investigating the effect of hydrogen peroxide as an electron acceptor in increasing the capability of slurry photocatalytic process in dye removal

Dual functional covalent triazine framework-TiO2 S-scheme heterojunction for efficient sequestration of ciprofloxacin: Mechanism and degradation products

The development of adsorbent and/or photocatalysts based on covalent triazine frameworks (CTF) is fascinating research due to their structural properties, functional groups, and active sites. Herein, a CTF-TiO2 heterojunction was synthesized by modifying CTF sheets with TiO2 particles through wet impregnation technique and adsorptive and photocatalytic activities determined for ciprofloxacin (CIP) removal. Comprehensive characterisation of the composites revealed suitable properties of the composites, such as sandwich-like CTF-TiO2 morphology, improved thermal stability, and better heteroatom effect (HAE). The adsorption capacity of CTF-TiO2-1 (CT-1) and CTF-TiO2-2 (CT-2) reached 30.30 mg g-1 and 13.61 mg g-1, respectively. Meanwhile, the CT-2/H2O2 system, compared to all other materials, achieved a better degradation efficiency of 90.7 % within 40 min compared to 77.5 % observed in using only CT-2 for 120 min. In addition, scavenging results suggested that e- and h+ was crucial for the effective degradation of CIP. Identification of the degradation product of CIP suggests hydroxylation, decarboxylation, and opening of the quinolone and piperazine ring as possible degradation pathways. The mineralization of CIP was 90.93 % for the CT-2/H2O2 system and its stability maintained for four cycles. The outstanding performance of CT-2 is attributed to its enhanced band gap energy of 2.86 eV, and reduced recombination rate of photogenerated electrons and holes. These results prove these materials are efficient adsorbent/photocatalyst in CIP removal from solution.

The effect of silica-doped graphene oxide (GO-SiO2) on persulfate activation for the removal of Acid Blue 25

The release of synthetic dyes into water bodies poses many environmental issues, and their removal is a necessity. Advanced oxidation processes (AOPs) can be employed for removal, in many of which a catalyst is used. graphene oxide (GO) is a viable catalyst due to its distinctive structural properties; however, it is reportedly incapable of effectively activating persulfate. Thus, this study delves for the first time into the influence of doping silica on enhancing GO's catalytic performance to activate persulfate for decolorizing Acid Blue 25 (AB25). Based on the results, an equal weight proportion of GO to silica was selected as the most efficient ratio. In addition, pH had no significant effect on removal efficiency, while temperature had the highest impact. Within 150 min with 0.075 gr/L of GO-SiO2 as the catalyst and 1 gr/L of Na2S2O8 as the oxidant, the investigated process removed Acid Blue 25 up to 82%, which was 9% higher than when GO alone was used as the catalyst. As for COD removal, the contribution of doping silica was more significant and led to 37% COD removal, which was 17% higher than when GO alone was used.

Comparative study of different ultrasound based hybrid oxidation approaches for treatment of real effluent from coke oven plant

The present study investigates the treatment of real coke plant effluent utilising several ultrasound-based hybrid oxidation approaches including Ultrasound (US) alone, US + catalyst, US + H2O2, US + Fenton, US + Ozone, and US + Peroxone, with main objective as maximizing the reduction of chemical oxygen demand (COD). Ultrasonic horn at power of 130 W, frequency as 20 kHz and duty cycle as 70% was applied. Study with varying catalyst (TiO2) dose from 0.5 g/L - 2 g/L revealed 1 g/L as the optimum dose resulting in 65.15% reduction in COD. A 40 ml/L dose of H2O2 was shown to be optimal, giving an 81.96% reduction in COD, based on the study of varied doses of H2O2 from 20 ml/L to 60 ml/L. US + Fenton reagent combination at optimum Fe2+/H2O2 (w/v) ratio of 1:1 resulted in a COD reduction of 85.29% whereas reduction of COD as 81.75% was obtained at the optimum flow rate of ozone as 1 LPM for US + Ozone approach. US + Peroxone demonstrated the best efficiency (90.48%) for COD reduction. To find the toxicity effects, the treated (US + peroxone) and non-treated samples were tested for the growth of bacterial cultures. It was observed that the toxicity of the treated sample increased only marginally after treatment. High-resolution liquid chromatography mass spectrometry (HR-LCMS) analysis was also performed to establish intermediate compounds. Overall, the coupling of ultrasound with oxidation processes produced better results with US + Peroxone established as best treatment approach for coke plant effluent.

Advances in Polyoxometalates as Electron Mediators for Photocatalytic Dye Degradation

The increasing concerns over the environment and the growing demand for sustainable water treatment technologies have sparked substantial interest in the field of photocatalytic dye removal. Polyoxometalates (POMs), known for their intricate metal-oxygen anion clusters, have received considerable attention due to their versatile structures, compositions, and efficient facilitation of photo-induced electron transfers. This paper provides an overview of the ongoing research progress in the realm of photocatalytic dye degradation utilizing POMs and their derivatives. The details encompass the compositions of catalysts, catalytic efficacy, and light absorption propensities, and the photocatalytic mechanisms inherent to POM-based materials for dye degradation are exhaustively expounded upon. This review not only contributes to a better understanding of the potential of POM-based materials in photocatalytic dye degradation, but also presents the advancements and future prospects in this domain of environmental remediation.

Sunlight-assisted photocatalytic degradation of orange G dye using cost-effective zinc oxide nanoparticles

We have used an environmentally friendly approach to produce zinc oxide nanoparticles from an aqueous extract of Cucumis maderaspatanus L. leaves (Cm-ZnO NPs). Leaf extract phytoconstituents work as both reducing and stabilising agents. Calcination at 300, 500, 700, and 800 °C allowed fine-tuning of the bandgap of synthesised Cm-ZnO NPs, which has been well-characterized. The XRD analysis confirmed the crystalline nature of the Cm-ZnO NPs. The Cm-ZnO NPs were found to be spherical and averaged 8.6 nm in size, as determined by transmission electron microscopy and field emission scanning electron microscopy. TGA testing validated the nanoparticles' resilience to heat. The zeta potential measurements showed that the Cm-ZnO NPs were stable. By analysing the sorption of nitrogen onto the nanoparticles, we were able to calculate their surface area, which came in at 19 m2/g. The degradation of orange G (OG) dye in the presence of hydrogen peroxide (H2O2) served as an oxidizing agent and measured the photocatalytic efficiency of the Cm-ZnO NPs. In addition, the effect of varying dye, H2O2, and catalyst concentrations on photodegradation was studied. The rate of reactions was computed. In conclusion, the obtained data demonstrated that the produced Cm-ZnO NPs can be employed as a cost-efficient catalyst for textile industrial effluent treatment.

V. Metal peroxides as potential photocatalysts for environmental remediation

Inorganic oxide materials such as TiO₂ and ZnO have been extensively studied for environmental remediation, that operates through photo generated Reactive Oxygen Species (ROS) such as H₂O₂, ·OH and O₂ ^- to decontaminate waste water. However, inorganic solid oxidants such as metal peroxides capable of generating ROS in aqueous solutions have not been studied for environmental remediation. Towards this objective, we have synthesized peroxides of Zn, Mg, and Ba and characterized these by powder X-ray diffraction, Transmission Electron Microscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of these wide band gap semiconductors has also been investigated. The novelty of the work is in the use of these peroxides as chemical sources of ROS in aqueous suspensions in addition to their photochemical generation. Hence, these peroxides, in particular Ba, exhibit high photocatalytic activity, better than the well-known ZnO. The mechanisms of ROS generation and subsequent dye degradation are elucidated. ROS has been estimated and is correlated to the photocatalytic activity. This work reports for the first time BaO₂ as potential photocatalyst.

A review on TiO2/SnO2 heterostructures as a photocatalyst for the degradation of dyes and organic pollutants

Industrialization, civilization and human activities have all grown steadily in recent years. As a result, small and large industries discharge many organic pollutants into the environment and contribute to environmental pollution. These compounds are quite stable and challenging to break down over time, posing a long-term risk. The heterogeneous advanced oxidation processes technology has gained tremendous attention. It depends on the light-induced formation of e^-/h⁺ pairs, which combine with water and aqueous oxygen to generate highly reactive hydroxyl radicals that degrade the organic pollutants in a solution and convert them ultimately into non-toxic products. In this paper, the synergetic impact of TiO₂-SnO₂ coupling with other semiconductor materials and their photodegradation performance on toxic contaminants in an aqueous medium has been reviewed. In addition, multiple approaches for the synthesis of TiO₂-SnO₂ photocatalysts have been discussed. Among them, hydrothermal, sol-gel, electrospinning, precipitation and even their combination are extensively used to synthesize various forms of nanostructures. These techniques demonstrate better tunability for visible absorption, suppression of e^-/h⁺ pair recombination and enhanced e^-/h⁺ separation to improve photocatalytic performance. This paper also summarises the role of different operating factors such as catalyst loading, pH, pollutants variation concentration, various light sources and oxidizing agents on the photodegradation of organic pollutants.