Effect of anoxic selector configuration on sludge volume index control and bacterial population fingerprinting

Cultivation of activated sludge using sea mud as seed to treat industrial phenolic wastewater with high salinity

A technique is proposed to treat saline hazardous wastewater by using marine activated sludge, cultivated with sea mud as seed. Since the developed marine activated sludge had phenol-tolerant microorganisms (MAS-1, MAS-2 and MAS-3) which originated from the ocean, it was envisaged that these bacteria could survive and breakdown phenol in saline environments. In this work, typical phenol-tolerant microorganisms were isolated from the marine activated sludge and identified. After a hierarchical acclimation process, the marine activated sludge was used to treat the industrial phenolic wastewater with high salinity. The marine activated sludge was able to break down phenol and other organic components effectively and efficiently in treating the wastewater with salinity of 5.7% w/v. The results showed a high removal of phenol (99%), COD (80%) and NH₃-N (68%).

A comparative analysis of the characteristics of a range of real and synthetic wastewaters

Synthetic wastewaters are widely used in many fields of wastewater research and operational management. However, few comparative studies have been conducted on the large number of published formulations. Eleven synthetic formulations simulating municipal wastewaters were selected based on their frequency of use, relative complexity, ease of formulation and cost and compared to two real municipal wastewaters. Synthetic wastewaters vary significantly in their compositions and characteristics, especially in terms of alkalinity, BOD K 1, SOUR, BODU, COD/BOD and C/N/P ratio, although they are portrayed as 'typical' in terms of characteristics and suitability for use. The pH, alkalinity and the presence of Ca and Mg should be considered in combination with the diluent used. Where the diluent is tap water, then the presence of treatment chemicals should also be considered. The effects of the micronutrients present are also an important factor. The study found that no single formulation is appropriate for all situations. Both the Syntho and Synthes formulations attempt to simulate real wastewater, whereas other formulations primarily act as readily biodegradable vectors for toxicity analyses, characterisation studies and treatment process evaluations. The criteria for choosing a particular synthetic wastewater very much depend on its intended application and require careful selection.

Bacterial community analysis of activated sludge: an evaluation of four commonly used DNA extraction methods

The effectiveness of three commercially available direct DNA isolation kits (Mobio, Fast, Qiagen) and one published direct DNA extraction protocol (Bead) for extracting bacterial DNA from different types of activated sludge was investigated and mutually compared. The DNA quantity and purity were determined using real-time PCR targeting the bacterial 16S rDNA gene. Microbial community fingerprints were assessed by automated ribosomal intergenic spacer analysis. The resulting community profiles were analyzed with canonical correspondence analysis. Our results clearly demonstrate that direct DNA extraction methods can significantly influence the DNA quantity, purity, and observed community patterns of microbiota in activated sludge. Fast and Mobio generated high amounts of good quality DNA compared to Bead and Qiagen. Mobio also resulted in the detection of the highest number of species while Fast scored the best in discriminating between the community patterns of different activated sludge types. With respect to the characterization of community profiles, our analyses demonstrated a strong sludge type dependent variability among methods. Taking into account our results, we recommend Fast as the most suitable DNA extraction method for activated sludge samples used for bacterial community studies.

Bacterial community and "Candidatus Accumulibacter" population dynamics in laboratory-scale enhanced biological phosphorus removal reactors

"Candidatus Accumulibacter" and total bacterial community dynamics were studied in two lab-scale enhanced biological phosphorus removal (EBPR) reactors by using a community fingerprint technique, automated ribosomal intergenic spacer analysis (ARISA). We first evaluated the quantitative capability of ARISA compared to quantitative real-time PCR (qPCR). ARISA and qPCR provided comparable relative quantification of the two dominant "Ca. Accumulibacter" clades (IA and IIA) detected in our reactors. The quantification of total "Ca. Accumulibacter" 16S rRNA genes relative to that from the total bacterial community was highly correlated, with ARISA systematically underestimating "Ca. Accumulibacter" abundance, probably due to the different normalization techniques applied. During 6 months of normal (undisturbed) operation, the distribution of the two clades within the total "Ca. Accumulibacter" population was quite stable in one reactor while comparatively dynamic in the other reactor. However, the variance in the clade distribution did not appear to affect reactor performance. Instead, good EBPR activity was positively associated with the abundance of total "Ca. Accumulibacter." Therefore, we concluded that the different clades in the system provided functional redundancy. We disturbed the reactor operation by adding nitrate together with acetate feeding in the anaerobic phase to reach initial reactor concentrations of 10 mg/liter NO(3)-N for 35 days. The reactor performance deteriorated with a concomitant decrease in the total "Ca. Accumulibacter" population, suggesting that a population shift was the cause of performance upset after a long exposure to nitrate in the anaerobic phase.