Antimicrobial aptamers for detection and inhibition of microbial pathogen growth

Novel Aptamer Strategies in Combating Bacterial Infections: From Diagnostics to Therapeutics

Bacterial infections and antimicrobial resistance are posing substantial difficulties to the worldwide healthcare system. The constraints of conventional diagnostic and therapeutic approaches in dealing with continuously changing infections highlight the necessity for innovative solutions. Aptamers, which are synthetic oligonucleotide ligands with a high degree of specificity and affinity, have demonstrated significant promise in the field of bacterial infection management. This review examines the use of aptamers in the diagnosis and therapy of bacterial infections. The scope of this study includes the utilization of aptasensors and imaging technologies, with a particular focus on their ability to detect conditions at an early stage. Aptamers have shown exceptional effectiveness in suppressing bacterial proliferation and halting the development of biofilms in therapeutic settings. In addition, they possess the capacity to regulate immune responses and serve as carriers in nanomaterial-based techniques, including radiation and photodynamic therapy. We also explore potential solutions to the challenges faced by aptamers, such as nuclease degradation and in vivo instability, to broaden the range of applications for aptamers to combat bacterial infections.

Physical and Functional Characterization of PLGA Nanoparticles Containing the Antimicrobial Peptide SAAP-148

Synthetic antimicrobial and antibiofilm peptide (SAAP-148) commits significant antimicrobial activities against antimicrobial resistant (AMR) planktonic bacteria and biofilms. However, SAAP-148 is limited by its low selectivity index, i.e., ratio between cytotoxicity and antimicrobial activity, as well as its bioavailability at infection sites. We hypothesized that formulation of SAAP-148 in PLGA nanoparticles (SAAP-148 NPs) improves the selectivity index due to the sustained local release of the peptide. The aim of this study was to investigate the physical and functional characteristics of SAAP-148 NPs and to compare the selectivity index of the formulated peptide with that of the peptide in solution. SAAP-148 NPs displayed favorable physiochemical properties [size = 94.1 ± 23 nm, polydispersity index (PDI) = 0.08 ± 0.1, surface charge = 1.65 ± 0.1 mV, and encapsulation efficiency (EE) = 86.7 ± 0.3%] and sustained release of peptide for up to 21 days in PBS at 37 °C. The antibacterial and cytotoxicity studies showed that the selectivity index for SAAP-148 NPs was drastically increased, by 10-fold, regarding AMR Staphylococcus aureus and 20-fold regarding AMR Acinetobacter baumannii after 4 h. Interestingly, the antibiofilm activity of SAAP-148 NPs against AMR S. aureus and A. baumannii gradually increased overtime, suggesting a dose-effect relationship based on the peptide's in vitro release profile. Using 3D human skin equivalents (HSEs), dual drug SAAP-148 NPs and the novel antibiotic halicin NPs provided a stronger antibacterial response against planktonic and cell-associated bacteria than SAAP-148 NPs but not halicin NPs after 24 h. Confocal laser scanning microscopy revealed the presence of SAAP-148 NPs on the top layers of the skin models in close proximity to AMR S. aureus at 24 h. Overall, SAAP-148 NPs present a promising yet challenging approach for further development as treatment against bacterial infections.

Development of electrochemical aptasensors detecting phosphate ions on TMB substrate with epoxy-based mesoporous silica nanoparticles

This study, it is aimed to develop an electrochemical aptasensor that can detect phosphate ions using 3.3'5.5' tetramethylbenzidine (TMB). It is based on the principle of converting the binding affinity of the target molecule phosphate ion (PO₄^3-) into an electrochemical signal with specific aptamer sequences for the aptasensor to be developed. The aptamer structure served as a gate for the TMB to be released and was used to trap the TMB molecule in mesoporous silica nanoparticles (MSNPs). The samples for this study were characterized by transmission electron spectroscopy (TEM), Brunner-Emmet-Teller, dynamic light scattering&electrophoretic light scattering, and induction coupled plasma atomic emission spectroscopy. According to TEM analysis, MSNPs have a morphologically hexagonal structure and an average size of 208 nm. In this study, palladium-carbon nanoparticles (Pd/C NPs) with catalytic reaction were used as an alternative to the biologically used horseradish peroxidase (HRP) enzyme for the release of TMB in the presence of phosphate ions. The limit of detection (LOD) was calculated as 0.983 μM, the limit of determination (LOQ) was calculated as 3.276 μM, and the dynamic linear phosphate range was found to be 50-1000 μM. The most important advantage of this bio-based aptasensor assembly is that it does not contain molecules such as a protein that cannot be stored for a long time at room temperature, so its shelf life is very long compared to similar systems developed with antibodies. The proposed sensor shows good recovery in phosphate ion detection and is considered to have great potential among electrochemical sensors.

Prospects of Exploring the Metal-Organic Framework for Combating Antimicrobial Resistance

Infectious diseases are a major public health concern globally. Infections caused by pathogens with resistance against commonly used antimicrobial drugs or antibiotics (known as antimicrobial resistance, AMR) are becoming extremely difficult to control. AMR has thus been declared as one of the top 10 global public health threats, as it has very limited solutions. The drying pipeline of effective antibiotics has further worsened the situation. There is no absolute treatment, and the limitations of existing methods warrant further development in antimicrobials. Recent developments in the nanomaterial field present them as promising therapeutics and effective alternative to conventional antibiotics and synthetic drugs. The metal-organic framework (MOF) is a recent addition to the antimicrobial category with superior properties. The MOF exerts antimicrobial action on a wide range of species and is highly biocompatible. Additionally, their porous structures allow the incorporation of biomolecules and drugs for synergistic antimicrobial action. This review provides an inclusive summary of the molecular events responsible for resistance development and current trends in antimicrobials to combat antibiotic resistance and explores the potential role of the MOF in tackling the drug-resistant microbial species.

The systemic characterization of aptamer cocktail for bacterial detection studied by graphene oxide-based fluorescence resonance energy transfer aptasensor

Aptamers have gained significant attention as the molecular recognition element to replace antibodies in sensor development and target delivery. Nevertheless, it is noteworthy that unlike the wide application of polyvalent antibodies, existing researches on the combined use of heterologous aptamers with similar recognition affinity and specificity for target detection were sporadic. Herein, first, the wide existence of polyaptamer for bacteria was revealed through the summary of existing literature. Furthermore, based on the establishment of a sensitive aptamer cocktail/graphene oxide fluorescence resonance energy transfer polyaptasensor with a detection limit as low as 10 CFU/ml, the systemic characterization of aptamer cocktails in bacterial detection was carried out by taking E. coli, Vi. parahemolyticus, S. typhimurium, and C. sakazakii as the assay targets. It was turned out that the polyaptasensors for C. sakazakii and S. typhimurium owned prevalence in the broader concentration range of target bacteria. While the polyaptasensors for E. coli and V. parahemolyticus outperformed monoaptasensor mainly in the lower concentration of target bacteria. The linear relationships between fluorescence recovery and the concentration of bacteria were also discussed. The different characteristics of the bacterial cellular membrane, including the binding affinity and the robustness to variation, are analyzed to be the main reason for the diverse detection performance of aptasensors. The study here enhances a sensor detection strategy with super sensitivity. More importantly, this systemic study on the aptamer cocktail in reference to antibodies will advance the in-depth understanding and rational design of aptamer based biological recognition, detection, and targeting.

Targeted Stimuli-Responsive Mesoporous Silica Nanoparticles for Bacterial Infection Treatment

The rise of antibiotic resistance and the growing number of biofilm-related infections make bacterial infections a serious threat for global human health. Nanomedicine has entered into this scenario by bringing new alternatives to design and develop effective antimicrobial nanoweapons to fight against bacterial infection. Among them, mesoporous silica nanoparticles (MSNs) exhibit unique characteristics that make them ideal nanocarriers to load, protect and transport antimicrobial cargoes to the target bacteria and/or biofilm, and release them in response to certain stimuli. The combination of infection-targeting and stimuli-responsive drug delivery capabilities aims to increase the specificity and efficacy of antimicrobial treatment and prevent undesirable side effects, becoming a ground-breaking alternative to conventional antibiotic treatments. This review focuses on the scientific advances developed to date in MSNs for infection-targeted stimuli-responsive antimicrobials delivery. The targeting strategies for specific recognition of bacteria are detailed. Moreover, the possibility of incorporating anti-biofilm agents with MSNs aimed at promoting biofilm penetrability is overviewed. Finally, a comprehensive description of the different scientific approaches for the design and development of smart MSNs able to release the antimicrobial payloads at the infection site in response to internal or external stimuli is provided.

Inhibition of enteropathogenic Escherichia coli biofilm formation by DNA aptamer

Enteropathogenic Escherichia coli (EPEC) is a bioagent that causes diarrhea through the formation of biofilm. The recalcitrant of EPEC to the current conventional antibiotic treatment has grown a big concern in a way to find effective alternative inhibitors. Aptamers have been demonstrated to show the ability to kill the pathogenic bacteria through inhibition of biofilm formation. Therefore, this study aimed to investigate antibiofilm activities of six types of aptamers against EPEC K1.1 which was isolated from patients with diarrhea. Environmental conditions such as temperatures and pH which impacted on biofilm formation of EPEC K1.1 and also biofilm inhibition of aptamer on EPEC K1.1 were performed by counting the crystal violet formation in 96-well polystyrene microplates at OD₅₇₀. The motility examination combined with qPCR were applied to prove the mechanism of aptamers inhibition on biofilm by targeting essential genes that involve biofilm formation. The result showed that by applying cut off value at 0.399, aptamer SELEX 10 Colony 5 exhibited the highest biofilm inhibition against EPEC K1.1 with an absorbance value of 0.126. Further analysis showed that this aptamer also was able to reduce the motility diameter of EPEC K1.1. The effect of this aptamer on EPEC K1.1 motility was confirmed by qPCR where the mRNA level of motB, csgA and lsrA gene reduced significantly compared to the untreated group. Aptamer SELEX 10 Colony 5 was able to inhibit biofilm formation through interfering the motility ability of EPEC K1.1 and also by reducing the mRNA level of biofilm formation-related genes. This study provides evidences that aptamer is effective and promising for both antibiofilm of EPEC K1.1 and alternative treatment of diarrhea.

Inhibitory effects of aptamer targeted teicoplanin encapsulated PLGA nanoparticles for Staphylococcus aureus strains

Emergence of resistance to traditional antibiotic treatments necessitates alternative delivery systems. Teicoplanin is a glycopeptide antibiotic used in the treatments of serious infections caused by Gram-positive bacteria, including Methicillin Resistant Staphylococcus aureus (MRSA). One strategy to keep up with antibiotic resistance development is to limit dose and amount during treatments. Targeted delivery systems of antibiotics have been suggested as a mechanism to slow-down the evolution of resistance and to increase efficiency of the antimicrobials on already resistant pathogens. In this study, we report teicoplanin delivery nanoparticles of Poly Lactic-co-Glycolic Acid (PLGA), which are functionalized with S. aureus specific aptamers. A 32-fold decrease in minimum inhibitory concentration (MIC) values of teicoplanin for S. aureus was demonstrated for susceptible strains and about 64-fold decline in MIC value was achieved for moderately resistant clinical isolates of MRSA upon teicoplanin treatment with aptamer-PLGA nanoparticles. Although teicoplanin delivery in PLGA nanoparticles without targeting demonstrated eightfold decrease in MIC of susceptible strains of S. aureus and S. epidermidis and twofold in MIC of resistant strains, the aptamer targeting specifically decreased MIC for S. aureus, but not for S. epidermidis. Therefore, aptamer-targeted PLGA delivery of antibiotic can be an attractive alternative to combat with some of the multi-drug resistant bacterial pathogens.

Antibacterial Therapeutic Agents Composed of Functional Biological Molecules

Antibacterial agents are a group of materials that selectively destroy bacteria by interfering with bacterial growth or survival. With the emergence of resistance phenomenon of bacterial pathogens to current antibiotics, new drugs are frequently entering into the market along with the existing drugs, and the alternative compounds with antibacterial functions are being explored. Due to the advantages of their inherent biochemical and biophysical properties including precise targeting ability, biocompatibility, biodegradability, long blood circulation time, and low cytotoxicity, biomolecules such as peptides, carbohydrates, and nucleic acids have huge potential for the antimicrobial application and have been extensively studied in recent years. In this review, antimicrobial therapeutic agents composed of three kinds of functional biological molecules were summarized. In addition, the research progress of antibacterial mechanism, chemical modification, and nanoparticle coupling of those biomolecules were also discussed.

Therapeutic applications of nucleic acid aptamers in microbial infections

Today, the treatment of bacterial infections is a major challenge, due to growing rate of multidrug-resistant bacteria, complication of treatment and increased healthcare costs. Moreover, new treatments for bacterial infections are limited. Oligonucleotide aptamers are single stranded DNAs or RNAs with target-selective high-affinity feature, which considered as nucleic acid-based affinity ligands, replacing monoclonal antibodies. The aptamer-based systems have been found to be talented tools in the treatment of microbial infections, regarding their promising anti-biofilm and antimicrobial activities; they can reduce or inhibit the effects of bacterial toxins, and inhibit pathogen invasion to immune cell, as well as they can be used in drug delivery systems. The focus of this review is on the therapeutic applications of aptamers in infections. In this regard, an introduction of infections and related challenges were presented, first. Then, aptamer definition and selection, with a brief history of aptamers development against various pathogens and toxins were reviewed. Diverse strategies of aptamer application in drug delivery, as well as, the effect of aptamers on the immune system, as the main natural agents of human defense against pathogens, were also discussed. Finally, the future trends in clinical applications of this technology were discussed.

[Aptamers in the Treatment of Bacterial Infections: Problems and Prospects]

Aptamers are short single-stranded oligonucleotides which are selected via targeted chemical evolution in vitro to bind a molecular target of interest. The aptamer selection technology is designated as SELEX (Systematic evolution of ligands by exponential enrichment). SELEX enables isolation of oligonucleotide aptamers binding a wide range of targets of interest with little respect for their nature and molecular weight. A number of applications of aptamer selection were developed ranging from biosensor technologies to antitumor drug discovery. First aptamer-based pharmaceutical (Macugen) was approved by FDA for clinical use in 2004, and since then more than ten aptamer-based drugs undergo various phases of clinical trials. From the medicinal chemist’s point of view, aptamers represent a new class of molecules suitable for the development of new therapeutics. Due to the stability, relative synthesis simplicity, and development of advanced strategies of target specific molecular selection, aptamers attract increased attention of drug discovery community. Difficulties of the development of next-generation antibiotics basing on the conventional basis of combinatorial chemistry and high-throughput screening have also amplified the interest to aptamer-based therapeutic candidates. The present article reviews the investigations focused on the development of antibacterial aptamers and discusses the potential and current limitations of the use of this type of therapeutic molecules.

Electrochemical bacterial detection using poly(3-aminophenylboronic acid)-based imprinted polymer

Biosensors can deliver the rapid bacterial detection that is needed in many fields including food safety, clinical diagnostics, biosafety and biosecurity. Whole-cell imprinted polymers have the potential to be applied as recognition elements in biosensors for selective bacterial detection. In this paper, we report on the use of 3-aminophenylboronic acid (3-APBA) for the electrochemical fabrication of a cell-imprinted polymer (CIP). The use of a monomer bearing a boronic acid group, with its ability to specifically interact with cis-diol, allowed the formation of a polymeric network presenting both morphological and chemical recognition abilities. A particularly beneficial feature of the proposed approach is the reversibility of the cis-diol-boronic group complex, which facilitates easy release of the captured bacterial cells and subsequent regeneration of the CIP. Staphylococcus epidermidis was used as the model target bacteria for the CIP and electrochemical impedance spectroscopy (EIS) was explored for the label-free detection of the target bacteria. The modified electrodes showed a linear response over the range of 10³-10⁷cfu/mL. A selectivity study also showed that the CIP could discriminate its target from non-target bacteria having similar shape. The CIPs had high affinity and specificity for bacterial detection and provided a switchable interface for easy removal of bacterial cell.

Diazonium-based impedimetric aptasensor for the rapid label-free detection of Salmonella typhimurium in food sample

Fast and accurate detection of microorganisms is of key importance in clinical analysis and in food and water quality monitoring. Salmonella typhimurium is responsible for about a third of all cases of foodborne diseases and consequently, its fast detection is of great importance for ensuring the safety of foodstuffs. We report the development of a label-free impedimetric aptamer-based biosensor for S. typhimurium detection. The aptamer biosensor was fabricated by grafting a diazonium-supporting layer onto screen-printed carbon electrodes (SPEs), via electrochemical or chemical approaches, followed by chemical immobilisation of aminated-aptamer. FTIR-ATR, contact angle and electrochemical measurements were used to monitor the fabrication process. Results showed that electrochemical immobilisation of the diazonium-grafting layer allowed the formation of a denser aptamer layer, which resulted in higher sensitivity. The developed aptamer-biosensor responded linearly, on a logarithm scale, over the concentration range 1 × 10(1) to 1 × 10(8)CFU mL(-1), with a limit of quantification (LOQ) of 1 × 10(1) CFU mL(-1) and a limit of detection (LOD) of 6 CFU mL(-1). Selectivity studies showed that the aptamer biosensor could discriminate S. typhimurium from 6 other model bacteria strains. Finally, recovery studies demonstrated its suitability for the detection of S. typhimurium in spiked (1 × 10(2), 1 × 10(4) and 1 × 10(6) CFU mL(-1)) apple juice samples.

The application of capillary electrophoresis for assisting whole-cell aptamers selection by characterizing complete ssDNA distribution

Whole-cell SELEX faces more difficulties than SELEX against purified molecules target. In this work, we demonstrate the application of capillary electrophoresis for assisting whole-cell aptamers selection by characterizing complete ssDNA distribution. We chose three cancer cell lines U251, Hela and PC3 as target, FAM labeled Sgc8c (a 41mer aptamer) and FAM labeled 41mer random ssDNA library as ssDNA model. CE conditions of running buffer and capillary length and inner diameter as well as UV and LIF detection were optimized. The distribution percentage of Sgc8c and ssDNA library against U251, Hela and PC3 was demonstrated, the relative peak area of their complex is 8.94%, 1.05% and 0.44% for Sgc8c and 9.03%, 1.04% and 0.12% for ssDNA library respectively. Under the chosen experimental conditions, binding ability comparison of three cell lines was U251>Hela>PC3, which was validated by laser confocol microscope. For each cell, distribution percentage of ssDNA library was compared with that of Sgc8c. Finally, whole-cell complex of U251-Sgc8c was confirmed by increase incubation time and fraction CE analysis.

Aptamers Against Immunologic Targets: Diagnostic and Therapeutic Prospects

The concept of in vitro selection of nucleic acid aptamers emerged 25 years ago, and since then tremendous progress has been achieved in the development of different aptamers and their applications for various bioanalytical and therapeutic purposes. Among other protein targets of aptamers, immune system proteins are of particular interest both as diagnostic markers and therapeutic targets. The present review summarizes up-to-date articles concerning the selection and design of DNA and RNA aptamers against immunologic targets such as antibodies, cytokines, and T-cell and B-cell receptors. We also discuss the prospects of employing aptamers as recognizing modules of diagnostic aptasensors, potential therapeutic candidates for the treatment of autoimmune diseases and cancer, and specific tools for functional studies of immune system proteins.

Aptamers against pathogenic microorganisms

An important current issue of modern molecular medicine and biotechnology is the search for new approaches to early diagnostic assays and adequate therapy of infectious diseases. One of the promising solutions to this problem might be a development of nucleic acid aptamers capable of interacting specifically with bacteria, protozoa, and viruses. Such aptamers can be used for the specific recognition of infectious agents as well as for blocking of their functions. The present review summarizes various modern SELEX techniques used in this field, and of several currently identified aptamers against viral particles and unicellular organisms, and their applications. The prospects of applying nucleic acid aptamers for the development of novel detection systems and antibacterial and antiviral drugs are discussed.

Pathogen detection by core-shell type aptamer-magnetic preconcentration coupled to real-time PCR

The presence of pathogenic bacteria is a major health risk factor in food samples and the commercial food supply chain is susceptible to bacterial contamination. Thus, rapid and sensitive identification methods are in demand for the food industry. Quantitative polymerase chain reaction (PCR) is one of the reliable specific methods with reasonably fast assay times. However, many constituents in food samples interfere with PCR, resulting in false results and thus hindering the usability of the method. Therefore, we aimed to develop an aptamer-based magnetic separation system as a sample preparation method for subsequent identification and quantification of the contaminant bacteria by real-time PCR. To achieve this goal, magnetic beads were prepared via suspension polymerization and grafted with glycidylmethacrylate (GMA) brushes that were modified into high quantities of amino groups. The magnetic beads were decorated with two different aptamer sequences binding specifically to Escherichia coli or Salmonella typhimurium. The results showed that even 1.0% milk inhibited PCR, but our magnetic affinity system capture of bacteria from 100% milk samples allowed accurate determination of bacterial contamination at less than 2.0 h with limit of detection around 100 CFU/mL for both bacteria in spiked-milk samples.