Maxillary expansion in an animal model with light, continuous force

Reducing relapse and accelerating osteogenesis in rapid maxillary expansion using an injectable mesoporous bioactive glass/fibrin glue composite hydrogel

Rapid maxillary expansion (RME), as a common treatment for craniomaxillofacial deformity, faces the challenge of high relapse rates and unsatisfactory therapeutic effects. In this study, a standardized Sprague-Dawley (SD) rat RME model was first established with a modified expander as well as retainer design and optimized anterior maxillary expanding force of 100 g which exerted the most synchronized mobility of mid-palatal suture and incisors. Via the standardized model, the high relapse rate was proven to be attributed to insufficient osteogenesis in expanded suture, requiring long-term retainer wearing in clinical situations. To reduce the relapse rate, mesoporous bioactive glass/fibrin glue (MBG/FG) composite hydrogels were developed for an in situ minimal invasive injection that enhance osteogenesis in the expanded palate. The component of 1 wt% MBG was adopted for enhanced mechanical strength, matched degradation rate and ion dissolution, excellent in vitro biocompatibility and osteoinductivity. Effects of 1%MBG/FG composite hydrogel on osteogenesis in expanded mid-palatal sutures with/without retention were evaluated in the standardized model. The results demonstrated that injection of 1%MBG/FG composite hydrogel significantly promoted bone formation within the expanded mid-palatal suture, inhibited osteoclastogenesis and benefited the balance of bone remodeling towards osteogenesis. Combination of retainer and injectable biomaterial was demonstrated as a promising treatment to reduce relapse rate and enhance osteogenesis after RME. The model establishment and the composite hydrogel development in this article might provide new insight to other craniomaxillofacial deformity treatment and design of bone-repairing biomaterials with higher regenerative efficiency.

•

A standardized rat RME model was established with optimized parameters.

•

Sufficient osteogenesis was the prerequisite of reducing relapse ratio.

•

Design of an injectable MBG/FG composite hydrogel for osteogenic enhancement.

•

Combinatory treatment of injection and retention was developed for relapse reduction.

Cone‐Beam Computed Tomography Assessment of Maxillary Anterior Alveolar Bone Remodeling in Extraction and Non‐Extraction Orthodontic Cases Using Stable Extra‐Alveolar Reference

OBJECTIVE

To explore alveolar cortical positional change in response to tooth movement in extraction and non-extraction orthodontic cases, using cone-beam computed tomography (CBCT) and stable extra-alveolar references.

MATERIALS AND METHODS

The pre-treatment (T1) and post-treatment (T2) CBCT scans of 25 extraction (EXT) and matched 25 non-extraction (Non-EXT) orthodontic cases were imported into Dolphin Imaging 3D, and oriented uniformly. Sagittal and axial CBCT cross-sections were traced using customized software-generated guides. The displacement of teeth and alveolar bone cortices were automatically measured using the palatal plane (PP) and the line perpendicular to PP and passing Sella as reference. Intra- and inter-group differences between T1 and T2 were analysed. Subjects were also superimposed three-dimensionally using Geomagic Control X for qualitative analysis of cortical remodelling.

RESULTS

The EXT group showed incisor retraction, while the Non-EXT group exhibited statistically significant incisor anterior tipping (P < .05). In EXT, both the labial and palatal cortices are resorbed. Non-EXT showed labial cortex anterior modelling, and statistically significant palatal cortex resorption (P < .05). In both groups, statistically significant decrease in total and palatal alveolar widths, increase in labial widths, and palatal dehiscence were observed. Comparatively, EXT showed significantly more incisal total and palatal width decrease and palatal vertical bone loss.

CONCLUSION

Labial cortical remodelling was shown to follow anterior tooth movement, but the palatal cortical response to incisor retraction and labial cortical remodelling in general remained inconclusive. Narrowing of the alveolar housing and palatal dehiscence were observed regardless of extraction following orthodontic treatment.

Parathyroid hormone promotes maxillary expansion and reduces relapse in the repeated activation maxillary expansion rat model by regulating Wnt/β-catenin pathway

Background

Constricted maxillary bone is a common skeletal deformity, which may lead to crowding and posterior crossbite. Mid-palatal suture expansion is often used to increase the maxillary width, but its skeletal effects are limited and tend to relapse, even with prolonged retention. We hypothesized that parathyroid hormone (PTH) may reduce the relapse of maxillary expansion.

Methods

We established a novel rat maxillary expansion model using palatal tubes with an insertable “W”-shaped spring which can be repeatedly activated. A total of 32 male healthy Wistar rats were randomly divided into six groups: the control group, the PTH group, the expansion group, the expansion + PTH group, the expansion + relapse group and the expansion + PTH + relapse group. All animals in the first 4 groups were killed after 10 days and the 2 relapse groups were killed after 15 days. The maxillary arch widths and histological staining were used to assess the expansion and relapse effects. The immunohistochemical staining, micro-CT, RT-qPCR and Western blot were used to evaluate the bone remodeling during expansion.

Results

The suture width was increased by the expansion device, and the repeated activation maxillary expansion rat model showed better expansion effects than the conventional model. PTH significantly promoted the expansion width and reduced the relapse ratio. Meanwhile, in the expansion + PTH group, histological and immunohistochemical staining showed that osteoblasts, osteoclasts, new cartilage and osteoid were significantly increased, micro-CT showed increased bone mass, and PCR and Western blot results confirmed up-regulation of RANKL, β-catenin, type II collagen and OCN.

Conclusion

The novel repeated activation maxillary expansion rat model has better effects than the conventional model. PTH enhances the maxillary expansion and reduces its relapse by regulating Wnt/β-catenin and RANKL pathways. PTH administration may serve as an adjunctive therapy in addition to mechanical expansion for treatment of maxillary constriction.

Impact of Orthodontic Forces on Plasma Levels of Markers of Bone Turnover and Inflammation in a Rat Model of Buccal Expansion

Plasma levels of protein analytes might be markers to predict and monitor the kinetics of bone and tissue remodeling, including maximization of orthodontic treatment stability. They could help predict/prevent and/or diagnose possible adverse effects such as bone dehiscences, gingival recession, or root resorption. The objective of this study was to measure plasma levels of markers of bone turnover and inflammation during orthodontic force application in a rat model of orthodontic expansion. Two different orthodontic forces for bilateral buccal expansion of the maxillary arches around second and third molars were applied in 10 rats equally distributed in low-force (LF) or conventional force (CF) groups. Four rats served as the control group. Blood samples were collected at days 0, 1, 2, 3, 6, 13, 21, and 58. Longitudinal concentrations of osteoprotegerin (OPG), soluble receptor activator of nuclear factor kappaB ligand (sRANKL), interleukin-4 (IL-4), interleukin-6 (IL-6), interleukin-10 (IL-10), tumor necrosis factor α (TNF), and parathyroid hormone (PTH) were determined in blood samples by a multiplex immunoassay. CF and LF resulted in a significantly maxillary skeletal expansion while the CF group demonstrated significantly higher expansion than the LF group in the long term. Bone turnover demonstrated a two-phase response. During the “early phase” (up to 6 days of force application), LF resulted in more sRANKL expression and increased sRANKL/OPG ratio than the CF and control animals. There was a parallel increase in PTH levels in the early phase in response to LF. During the “late phase” (6–58 days), the markers of bone turnover were stable in both groups. IL-4, IL-6, and IL-10 levels did not significantly change the test groups throughout the study. These results suggest that maxillary expansion in response to different orthodontic forces follows different phases of bone turnover that may be force specific.

The Temporomandibular Joint: A Critical Review of Life-Support Functions, Development, Articular Surfaces, Biomechanics and Degeneration

The temporomandibular joint is a highly conserved articulation because it promotes survival and propagation via the essential functions of mastication, communication, and routine mating success (dentofacial esthetics). The temporomandibular joint is a unique secondary joint formed between the endochondral temporal bone and the mandibular secondary condylar cartilage via Indian hedgehog and bone morphogenetic protein signaling that is closely related to ear development. A dynamic epigenetic environment is provided by Spry1 and Spry2 genetic induction of the lateral pterygoid and temporalis muscles. Mechanical loading of the condylar periosteum during fetal development produces a superficial layer of fibrocartilage that separates from the condyle to form the interposed temporomandibular joint disc. The articular surfaces of the condyle and fossa are dynamically modified periosteum that has healing and regenerative capability. This unique tissue is composed of a superficial fibrous layer (synovial surface) with an underlying proliferative (cambium) layer that produces a cushioning layer of fibrocartilage which subsequently forms bone. Prior to occlusion of the first primary (deciduous) molars at about 16 months, facial development is dominated by primary genetic mechanisms. After achieving posterior functional occlusion, biomechanics enhances temporomandibular joint maturation, and assumes control of facial growth, development and adaptation. Concurrently, hypothalamus control of musculoskeletal physiology shifts from insulin-like growth factor IGF2 to IGF1, which affects bone via muscular loading (biomechanics). Three layers of temporomandibular joint fibrocartilage are resistant to heavy functional loading, but parafunctional clenching may result in degeneration that is first manifest as trabecular sclerosis of the mandibular condyle.

Botulinum toxin A injection into the anterior belly of the digastric muscle increased the posterior width of the maxillary arch in developing rats

Background

The purpose of this study was to evaluate the effects of botulinum toxin A (BTX) injection into the anterior belly of the digastric muscle on a growing rat.

Methods

Ten Sprague Dawley rats were used in this study. When the rats were 13 days old, 0.5 units of BTX was injected into the anterior belly of the digastric muscle for the experimental group (n = 5). For the control, the same volume of normal saline was injected (n = 5). The rats were sacrificed at 60 days old, and the skulls were harvested for micro-computed tomography (μCT) analysis.

Results

In anthropometric analysis, the zygomatic arch and mandibular bi-condylar width were significantly lower in the experimental group than those in the control group (P = 0.025 and 0.027, respectively). The maxillary point width was significantly higher in the experimental group than that in the control group (P = 0.020).

Conclusion

BTX injection into the anterior belly of the digastric muscle had effects on the maxillofacial bony width in growing rats.

Part II: Temporomandibular Joint (TMJ)-Regeneration, Degeneration, and Adaptation

PURPOSE OF REVIEW

Elucidate temporomandibular joint (TMJ) development and pathophysiology relative to regeneration, degeneration, and adaption.

RECENT FINDINGS

The pharyngeal arch produces a highly conserved stomatognathic system that supports airway and masticatory function. An induced subperiosteal layer of fibrocartilage cushions TMJ functional and parafunctional loads. If the fibrocartilage disc is present, a fractured mandibular condyle (MC) regenerates near the eminence of the fossa via a blastema emanating from the medial periosteal surface of the ramus. TMJ degenerative joint disease (DJD) is a relatively painless osteoarthrosis, resulting in extensive sclerosis, disc destruction, and lytic lesions. Facial form and symmetry may be affected, but the residual bone is vital because distraction continues to lengthen the MC with anabolic bone modeling. Extensive TMJ adaptive, healing, and regenerative potential maintains optimal, life support functions over a lifetime. Unique aspects of TMJ development, function, and pathophysiology may be useful for innovative management of other joints.

Low-Magnitude Forces for Bone Modeling and Remodeling in Dentofacial Orthopedics

PURPOSE OF REVIEW

To examine the evidence in support of light continuous forces for enhancing bone adaptation (modeling and remodeling) in orthodontics and dentofacial orthopedics.

RECENT FINDINGS

Clinical evidence suggests that light continuous orthodontic force can achieve physiologic expansion of the maxillary arch, but the long-term stability and the biological effects of the procedure are unclear. Compared to conventional orthodontic appliances that deliver heavy interrupted forces for tooth movement, the application of low-magnitude forces in animal models leads to anabolic modeling and remodeling of the alveolar bone in the path of orthodontic tooth movement. This results in dental translation and expansion of the alveolar process. Light continuous forces are preferable to heavy forces for more physiologic dentofacial orthopedics. The interaction of low-magnitude loads with soft tissue posture achieves therapeutic adaptation of the craniofacial skeleton. The increasing emphasis on genomic medicine and personalized treatment planning should focus on low-magnitude loads in orthodontics and dentofacial orthopedics.