Appearance or attitude: what matters to craniosynostosis patients? Association of self-esteem, depressive symptoms, and facial aesthetics in patients with sagittal and metopic synostosis

PURPOSE

The aim of this study was to investigate the presence of depressive symptoms and self-esteem, and their association with facial asymmetry in adults who were operated on in early childhood due to metopic and sagittal craniosynostosis.

METHODS

The study population consisted of 49 non-syndromic patients of whom 41 had premature fusion of the sagittal and 8 of metopic suture. There were 64 controls from the Finnish National Register. Self-esteem, depressive symptoms, and subjective satisfaction with one's appearance were evaluated by using the Rosenberg self-esteem questionnaire (RSE), the short form of Beck Depression Inventory (R-BDI), and a purpose-designed questionnaire on satisfaction with facial and overall appearance. Aesthetic evaluation was done from standard photographs using panels. The facial symmetry was calculated by using 3D photogrammetric methods.

RESULTS

Patients did not have a lower self-esteem or experience significantly more moderate or severe depressive symptoms. However, 20% of the patients and 6% of the controls (p = 0.041) experienced mild depressive symptoms. There was no difference between self-assessed evaluation of appearance between the groups. Only weak correlation was found between facial asymmetry and RSE or R-BDI results (cc = 0.27-0.42, p < 0.05). The self-assessed evaluation of facial and overall appearance correlated strongly with the R-BDI results.

CONCLUSION

Non-syndromic craniosynostosis patients are as satisfied with their appearance in adulthood as the control group and do not experience a lower self-esteem or more depressive symptoms. Facial asymmetry does not correlate with low self-esteem or clinically significant depressive symptoms in adulthood. Subjective evaluation of one's appearance correlated with depressive symptoms. Age and gender do not influence the former results. Overall, patients are satisfied with their appearance.

Craniofacial characteristics and cosmetic satisfaction of patients with sagittal and metopic synostosis: a case-control study using 3D photogrammetric imaging

PURPOSE

The aim of this study was to investigate the craniofacial and aesthetic characteristics of adult metopic and sagittal craniosynostosis patients operated on in early childhood compared to controls. The goal was to find objective measurements that would correlate with the patient's subjective self-evaluation of their own cosmetic appearance.

METHODS

The study population consisted of 49 patients from whom 41 had premature fusion of the sagittal and in 8 of metopic suture. There were 65 age and gender matching controls from The Finish National Register. The 3D photogrammetric models were created from all patients and controls. The images were analysed using Rapidform 2006. Facial landmarks were set by the standard Farkas points. Facial symmetry parameters were calculated by using the landmarks and the mirror shell of the face. Aesthetic evaluation was done from standard photographs using panels. Subjective satisfaction with one's own appearance was evaluated using questionnaires.

RESULTS

Patients had the greatest asymmetry in the forehead area when compared to controls (symmetry percentage 59% versus 66%, p = 0.013). In the control group, the gap between the eyes was smaller than in the case group, resulting in an absolute 2 mm difference (p = 0.003). The area of the chin and the landmarks were more located on the left side in the patient group, resulting in up to a 1.1 mm difference between the groups (p = 0.003). Only a weak association was found between craniofacial symmetry and appearance evaluations.

CONCLUSION

Patients operated on because of sagittal and metopic synostoses were found to have facial asymmetry at long follow-up. However, the differences were < 3 mm and not clinically important. The long-term aesthetical outcome of the surgery performed because of sagittal or metopic craniosynostosis based on the 3D image evaluation was good.

Two- and Three-Segment Surgically Assisted Rapid Maxillary Expansion: A Clinical Trial

BACKGROUND

The literature shows no consensus on whether two- or three-segment surgically assisted rapid maxillary expansion is the best operative technique.

METHODS

The present clinical trial was designed to compare the outcome of two- and three-segment osteotomy surgically assisted rapid maxillary expansion. Thirty-two adult patients with transverse maxillary deficiency greater than or equal to 5 mm were randomly assigned to two- and three-segment groups (n = 16). Dimensional and psychological assessments (Oral Health Impact Profile and Brazilian Orthognathic Quality of Life Questionnaire) were carried out before surgical intervention and at one of the following time points: completion of expansion, removal of expanding device, 6 months after completion of expansion, or 10 months after completion of expansion. Dimensional assessments for asymmetric expansion of the maxilla and for changes in the area and volume of the palatine vault were performed on digital data from tomographic and laser scanning with the aid of an engineering inspection software.

RESULTS

No statistically significant differences were found in asymmetry or stability outcomes between groups. The psychological benefit provided by the three-segment technique did not spread through the domains of the quality-of-life questionnaires.

CONCLUSIONS

The current findings suggest that three-segment surgically assisted rapid maxillary expansion outcomes do not exceed those obtained with its two-segment counterpart regarding symmetry of maxillary expansion and stability of area and volume of the palatine vault. Furthermore, psychological nuances evidenced in two- and three-segment groups with the tools used play a limited, short-lasting role, or a specific, more sensitive assessment tool needs to be developed.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, II.

3D Analysis of Facial Morphology of a Colombian Population Compared to Adult Caucasians

Objective:  The purpose of this study involves describing the facial morphology of a Colombian population with three-dimensional (3D) imaging, and comparing their facial morphology with the Caucasian to create a database for this ethnicity.

Materials and Methods:  The study, which included 135 subjects selected from the Valle University in Cali, Colombia, and 535 Caucasian subjects selected from the FaceBase–Data (1U01DE024449–01), was funded by the National Institute of Dental and Craniofacial Research. All images were taken in the natural head position (NHP) and captured using a stereo-photogrammetric camera system (3dMDface) to obtain a 3D image of each patient. The subjects were between 19 to 31 years of age, with a normal body mass index (BMI), and no craniofacial deformities. All images were plotted and analyzed using the 3dMDVultus software to calculate linear and angular measurements. Standard deviation (SD) and means were calculated for each measurement and analyzed using t -test for different samples.

Results:  The Hispanic population had wider eyes, more protruded upper and lower lips, wider face, and greater mandibular width. Caucasian females had a more acute full profile, larger middle third, and less protrusive lips. Understanding the facial morphology of different populations would help to establish a better diagnosis and treatment planning for each ethnicity.

Conclusions:  From this study, the following conclusions may be drawn:

1. The mean values of Colombian males showed greater measurements than females in the majority of measurements.

2. Caucasian females had a more acute full profile, larger middle and lower third, and less protrusive lips.

3. This study showed significant ethnic differences in the linear and angular measurements, showing us the importance of considering these findings in the diagnosis and treatment planning when a Hispanic population is involved. Soft tissue values should reflect the norms according to each ethnic population in order to achieve treatment goals.

Craniofacial Asymmetry from One to Three Years of Age: A Prospective Cohort Study with 3D Imaging

Deformational plagiocephaly (DP) is considered a risk factor for facial asymmetry. This cohort-based, prospective, follow-up study used three-dimensional (3D) stereophotogrammetry to assess the development of facial asymmetry in a normal birth cohort and to investigate the impact of DP on facial asymmetry for the age range of one to three years. The study sample consisted of 75 children: 35 girls (47%) and 40 (53%) boys recruited from Oulu University Hospital. A total of 23 (31%) subjects had a history of DP in infancy. 3D facial images were obtained at the mean (SD) age of 1.01 (0.04) year old at T1 and 3.02 (0.14) years old at T2. To determine facial asymmetry, both landmark-based and surface-based facial symmetry methods were used. As measured with the surface-based methods, upper facial symmetry improved from T1 to T2 (p < 0.05). As measured with the landmark-based methods, facial symmetry improved on the upper and lower jaw from T1 to T2 (p < 0.05). The asymmetric effect of DP on the upper parts of the face tends to correct spontaneously during growth. Results indicate that previous DP does not seem to transfer to facial or occlusal asymmetry at the age of three years old.

Plagiocephaly after Neonatal Developmental Dysplasia of the Hip at School Age

Developmental dysplasia of the hip (DDH) may require early abduction treatment with infants sleeping on their back for the first few months of life. As sleeping on back is known to cause deformational plagiocephaly, we assessed school age children treated for dislocation or subluxation of the hip-joint in infancy. Plagiocephaly was analyzed by using cephalic index (CI) and oblique cranial length ratio (OCLR) as anthropometric measurements from 2D digital vertex view photographs. Six of the 58 (10.3%) DDH children and only one of the 62 (1.6%) control children had plagiocephaly (p = 0.041). Furthermore, cross bite was found in 14 (24.1%) of the DDH children and in 7 (10.3%) of the control children. Developmental dysplasia of the hip in infancy was associated with cranial asymmetries and malocclusions at school age. Preventive measures should be implemented.

3D follow-up study of facial asymmetry after developmental dysplasia of the hip

OBJECTIVES

To evaluate the change in facial asymmetry among subjects treated for developmental dysplasia of the hip (DDH) from childhood to adolescence.

SETTING AND SAMPLE POPULATION

A total of 39 adolescents (26 females and 13 males), born and treated for DDH during 1997-2001, participated in the first examination in 2007 (T1; at the age of 8.2) and in the follow-up in 2016 (T2; at the age of 16.6).

MATERIAL AND METHODS

In this longitudinal study, three-dimensional (3D) images were taken using a 3DMD face system based on a stereophotogrammetric method. Facial asymmetry was determined as the average distance (mm) calculated between the original and superimposed mirrored face and the symmetry percentage (%) calculated as the face area where the distance between the original face and the mirrored surface does not exceed 0.5 mm.

RESULTS

Results showed increased asymmetry from T1 to T2. The average distance increased for whole face (from 0.51 mm to 0.59 mm, P = .001), upper face (from 0.41 mm to 0.49 mm, P = .005), mid-face (from 0.48 mm to 0.57, P = .002) and lower face (from 0.74 mm to 0.85 mm, P = .147). Facial symmetry percentage decreased for whole face from 61.23% to 55.38% (P = .011), for upper face from 69.27% to 62.24% (P = .005) and for mid-face from 62.29% to 55.63% (P = .007) and for lower face from 43.37% to 42.19% (P = .66).

CONCLUSION

Facial asymmetry increases from childhood to adulthood in subjects treated for DDH. Orthodontic treatment does not eliminate this asymmetric facial growth.

The course of positional cranial deformation from 3 to 12 months of age and associated risk factors: a follow-up with 3D imaging

Deformational plagiocephaly is reported in up to 46.6 % of healthy infants, with the highest point prevalence at around 3 months of age. Few prospective studies on the natural course of skull deformation have been conducted, and we know of no studies using 3D imaging starting from the highest point prevalence period. In this prospective, population-based cohort study, we describe the course of cranial asymmetry and shape in an unselected population using 3D stereophotogrammetry and investigate factors associated with late cranial deformation and failure to recover from previous deformation. We evaluated 99 infants at 3, 6, and 12 months of age. We acquired 3D craniofacial images and performed structured clinical examinations and parental interviews at each visit. Eight outcome variables, representing different aspects of cranial shape, were calculated from a total of 288 3D images. Scores of asymmetry-related variables improved throughout the observation period. However, the rate of correction for cranial asymmetry decreased as the infants grew older, also in relation to the rate of head growth, and a significant amount of asymmetry was still present at 12 months. Positional preference at 3 months predicted an unfavorable course of cranial asymmetry after 3 months, increasing the risk for DP persisting. What is known: • The prevalence of deformational plagiocephaly spontaneously decreases after the first months of life. • Limited neck range of motion and infant positional preference increase the risk of deformational plagiocephaly during the first months of life. What is new: • Positional preference at 3 months predicts an unfavorable spontaneous course of deformation also from three to 12 months of age, presenting a potential target for screening and treatment. • The spontaneous rate of correction for cranial asymmetry decreases after 6 months of age, also in relation to the rate of head growth.

Preventing deformational plagiocephaly through parent guidance: a randomized, controlled trial

Deformational plagiocephaly (DP) occurs frequently in otherwise healthy infants. Many infants with DP undergo physiotherapy or helmet therapy, and ample treatment-related research is available. However, the possibility of preventing DP has been left with little attention. We sought to evaluate the effectiveness of intervention in the newborn's environment, positioning, and handling on the prevalence of DP at 3 months and to investigate the causal relationship between DP and cervical imbalance. We carried out a randomized controlled trial, with healthy newborns randomized into two groups at birth. All families received standard positioning instructions to prevent SIDS. Additionally, the intervention group received detailed instructions regarding the infant's environment, positioning, and handling, with the goal of creating a nonrestrictive environment that promotes spontaneous physical movement and symmetrical motor development. Two- and three-dimensional photogrammetry served to assess cranial shape and goniometry to measure cervical motion. At 3 months, the prevalence of DP was lower in the intervention group in both 2D (11 vs 31 %) and 3D analyses (15 vs 33 %), and the asymmetry was milder in the intervention group. Infants with DP at follow-up had also developed more torticollis.

CONCLUSION

An early educational intervention reduces the prevalence and severity of DP at 3 months.

WHAT IS KNOWN

•Deformational plagiocephaly, often with associated torticollis, is common in healthy infants. •Parental education is frequently recommended for preventing deformational plagiocephaly, although information regarding the effectiveness of preventive strategies is scarce.

WHAT IS NEW

•Early parent guidance effectively reduces the prevalence and severity of DP and improves the cervical range of motion at three months. •Educating both parents and professionals about proper infant positioning on a national scale could help minimize public healthcare costs.

A 3D analysis of Caucasian and African American facial morphologies in a US population

INTRODUCTION

This study aimed to compare facial morphologies of an adult African-American population to an adult Caucasian-American population using three-dimensional (3D) surface imaging.

MATERIALS AND METHODS

The images were captured using a stereophotogrammetric system (3dMDface(TM) system). Subjects were aged 19-30 years, with normal body mass index and no gross craniofacial anomalies. Images were aligned and combined using RF6 Plus Pack 2 software to produce a male and female facial average for each population. The averages were superimposed and the differences were assessed.

RESULTS

The most distinct differences were in the forehead, alar base and perioricular regions. The average difference between African-American and Caucasian-American females was 1·18±0·98 mm. The African-American females had a broader face, wider alar base and more protrusive lips. The Caucasian-American females had a more prominent chin, malar region and lower forehead. The average difference between African-American and Caucasian-American males was 1·11±1·04 mm. The African-American males had a more prominent upper forehead and periocular region, wider alar base and more protrusive lips. No notable difference occurred between chin points of the two male populations.

CONCLUSIONS

Average faces were created from 3D photographs, and the facial morphological differences between populations and genders were compared. African-American males had a more prominent upper forehead and periocular region, wider alar base and more protrusive lips. Caucasian-American males showed a more prominent nasal tip and malar area. African-American females had broader face, wider alar base and more protrusive lips. Caucasian-American females showed a more prominent chin point, malar region and lower forehead.

Influence of maxillary obturator prostheses on facial morphology in patients with unilateral maxillary defects

STATEMENT OF PROBLEM

Facial asymmetry is prominent with individuals with unilateral bone resorption and can lead to decreased quality of life.

PURPOSE

The purpose of this study was to investigate the influence of maxillary obturator prostheses on facial morphology of individuals with unilateral maxillary defects by using 3-dimensional digital stereophotogrammetry.

MATERIAL AND METHODS

The facial data of 8 participants with unilateral maxillary defects were acquired with a noncontact 3-dimensional digitizer, both with and without maxillary prostheses. The mid-facial plane was established by overlapping an original facial image with its mirror image. Displacement at 18 measurement points, including 7 bilateral pairs, was compared between the 2 sides, with and without the prostheses. Asymmetry indices of these 7 pairs also were calculated. Multivariate repeated-measures ANOVA was used to determine differences.

RESULTS

Displacements of the lateral and inferior points at the ala of the nose were significantly greater on the defect side than on the normal side. The distances between the ideal and defect side points at the superior ala, the upper lip, and the angle of the mouth decreased significantly with the prosthesis. No significant differences were found in asymmetry indices, but the angle of the upper lip line to the mid-sagittal plane increased significantly with the prosthesis.

CONCLUSIONS

The 3-dimensional analyzing method developed in this study can be useful in evaluating facial reconstruction with maxillary obturator prostheses with individuals with unilateral maxillary defects. The prostheses affect the region of the nasal ala, the upper lip, and the angles of the mouth.

Making three-dimensional Monson's sphere using virtual dental models

OBJECTIVES

The Monson's sphere and curve of Wilson can be used as reference for prosthetic reconstructions or orthodontic treatments. This study aimed to generate and measure the three-dimensional (3-D) Monson's sphere and curve of Wilson using virtual dental models and custom software.

METHODS

Mandibular dental casts from 79 young adults of Korean descent were scanned and rendered as virtual dental models using a 3-D digitizing scanner. 26 landmarks were digitized on the virtual dental models using a custom made software program. The Monson's sphere was estimated by fitting a sphere to the cusp tips using a least-squares method. Two curves of Wilson were generated by finding the intersecting circle between the Monson's sphere and two vertical planes orthogonal to a virtual occlusal plane. Non-parametric Mann-Whitney and Kruskal-Wallis tests were performed to test for difference between sex and in cusp number within tooth position.

RESULTS

The mean radius of Monson's sphere was 110.89 ± 25.75 mm. There were significant differences between males and females in all measurements taken (p<0.01), within 16.87-17.27 mm. Furthermore, morphological variation derived from variability in cusp number in the second premolar and second molar were not found to influence occlusal curvature (p>0.05).

CONCLUSIONS

This study describes a best-fit algorithm for generating 3-D Monson's sphere using occlusal curves quantified from virtual dental models. The radius of Monson's sphere in Korean subjects was greater than the original four-inch value suggested by Monson.

CLINICAL SIGNIFICANCE

The Monson's sphere and curve of Wilson can be used as a reference for prosthetic reconstruction and orthodontic treatment. The data found in this study may be applied to improve dental treatment results.

Three-dimensional evaluation of changes in lip position from before to after orthodontic appliance removal

INTRODUCTION

Our objectives were to develop a reproducible method of superimposing 3-dimensional images for measuring soft-tissue changes over time and to use this method to document changes in lip position after the removal of orthodontic appliances.

METHODS

Three-dimensional photographs of 50 subjects were made in repose and maximum intercuspation before and after orthodontic appliance removal with a stereo camera. For reliability assessment, 2 photographs were repeated for 15 patients. The images were registered on stable areas, and surface-to-surface measurements were made for defined landmarks.

RESULTS

Mean changes were below the level of clinical significance (set at 1.5 mm). However, 51% and 18% of the subjects experienced changes greater than 1.5 mm at the commissures and lower lips, respectively.

CONCLUSIONS

The use of serial 3-dimensional photographs is a reliable method of documenting soft-tissue changes. Soft-tissue changes after appliance removal are not clinically significant; however, there is great individual variability.

MANDIBULAR ASYMMETRY CHARACTERIZATION USING GENERALIZED TENSOR-BASED MORPHOMETRY

Quantitative assessment of facial asymmetry is crucial for successful planning of corrective surgery. We propose a tensor-based morphometry (TBM) framework to locate and quantify asymmetry using 3D CBCT images. To this end, we compute a rigid transformation between the mandible segmentation and its mirror image, which yields global rotation and translation with respect to the cranial base to guide the surgery's first stage. Next, we nonrigidly register the rigidly aligned images and use TBM methods to locally analyze the deformation field. This yields data on the location, amount and direction of "growth" (or "shrinkage") between the left and right sides. We visualize this data in a volumetric manner and via scalar and vector maps on the mandibular surface to provide the surgeon with optimal understanding of the patient's anatomy. We illustrate the feasibility and strength of our technique on 3 representative patients with a wide range of facial asymmetries.

Facial morphology of Finnish children with and without developmental hip dysplasia using 3D facial templates

BACKGROUND

Developmental dysplasia of the hip (DDH) is a condition that affects the femoral head and the acetabulum and leads to hip subluxation and dislocation. Infants with DDH are usually treated using splints that immobilize their hip joint and are forced on their back for long periods of time. The link between positioning and facial asymmetries is poorly understood.

OBJECTIVE

To compare the facial morphologies of children with DDH to a group of healthy controls.

SUBJECTS AND METHODS

Fifty-six Finnish patients born with DDH were matched on the basis of gender and age to a control group. Three-dimensional surface images were captured using the 3dMDface system. Using RF6 PP2 software, anthropometric landmarks were plotted and used to calculate asymmetry based on 3D co-ordinates in a reference framework.

RESULTS

There was statistically significant difference between all paired facial shells. Relative to the control group, DDH boys and girls presented a chin-point deviation to the right, a more prominent left orbital ridge, a more protrusive nose and upper lip. The gender-specific subgroups show a similarity of 66.54 and 65.22% in girls and boys, respectively.

CONCLUSIONS

Patients with DDH present a facial asymmetry when compared to healthy controls. Gender characteristics are marked whether subjects are affected with DDH or not. Three-dimensional surface imaging is a powerful diagnostic and research tool.