"Effective" TMJ and chin position changes in Class II treatment

Oral Implications of Herbst Device Modification: A Case Report

BACKGROUND

Many studies analyse the effectiveness of the Herbst device in the treatment of dentoskeletal Class II malocclusion due to mandibular retrusion. This fixed device was devised by Emil Herbst for Class II treatment using a bite jumping, i.e., a device that holds the jaw in a forced anterior position. Comparison of the results obtained in numerous studies is difficult because they are often not comparable and not congruent due to a number of variables that prevent standardization.

METHODS

The purpose of the present study is to report some clinical-level considerations that may be important in order to obtain more predictable therapeutic outcomes. The simplified design of the Herbst device offers better patient comfort and easier cleanability but may show some disadvantages, such as less anchorage.

RESULTS

The device was evaluated in conjunction with the multi-bracket phase that preceded Herbst therapy and concluded after the device was removed. The therapy was performed in the absence of skeletal anchorage.

CONCLUSIONS

In our opinion, standardization of therapy according to precise protocols may positively affect the therapeutic outcomes by achieving faster occlusal stabilization, more proper neuro-muscular balance, less stress on anchor units, and shorter treatment time.

Comparisons of soft tissue changes after Herbst appliance treatment in three different growth phases

BACKGROUND

This study aimed to compare the soft tissue effects of Herbst appliance in Class II malocclusion patients treated in three different craniofacial growth phases: prepubertal (PRE), circumpubertal (CIR), and postpubertal (POS).

METHODS

In total, 95 patients with Class II Division 1 malocclusion previously treated with a Herbst appliance were analyzed. Through the cervical vertebral maturation stages method, patients were allocated into three groups depending on the growth craniofacial phase at the beginning of treatment: PRE, CIR, and POS. Seventeen cephalometric measures were evaluated from each lateral radiograph before and after Herbst therapy using the Radiocef 2 software (Radio Memory, Belo Horizonte). Intragroup and intergroup treatment changes were compared statistically using a paired t test and MANOVA test, respectively.

RESULTS

Soft tissue thickness changes were related only to mandible; all three mandibular measurements (L1_LL, B_B', and Pog_Pog') showed thickening for the PRE group ranging from 0.92 mm (Pog_Pog') to 2.02 mm (B_B'), and only lower lip thickened overtime for the POS group (L1_LL = 0.99 mm). Soft and hard tissue pogonion displaced anteriorly, but only the soft tissue showed differences among groups; PRE group presented more anterior displacement than POS group (3.61 mm and 1.39 mm, respectively). Hard and soft tissue facial convexity decreased more in the PRE and CIR groups than in the POS group. Mentolabial sulcus depth reduced more in the PRE (1.07 mm) and CIR (1.29 mm) groups than in the POS (0.55 mm) group. Horizontal movement of the skeletal and soft pogonion presented a moderate-high positive correlation (r = 0.783), and hard and soft facial convexity showed a moderate-low positive correlation (r = 0.403).

CONCLUSIONS

Herbst appliance therapy produces soft tissue improvements in the three phases of craniofacial growth, being greater in patients in the PRE and CIR phases.

A Three-Dimensional Evaluation of Skeletal and Dentoalveolar Changes in Growing Class II Patients after Functional Appliance Therapy: A Retrospective Case-Control Study

Background: The aim was to assess three-dimensionally mandibular and maxillary changes in growing Class II patients treated with removable functional appliances followed by fixed appliances. Methods: Twenty-four Class II patients (age range: 9 to 14, mean: 12.1 ± 1.1 years) treated with removable functional appliances followed by fixed appliances (functional appliance group-FAG) were retrospectively selected and compared to an age-matched control group (CG) treated with fixed appliances only. To be included in the study, pre- and post-treatment CBCT scans had to be available. The CBCTs were used to analyze, in 3D, the changes following treatment and growth. Results: Before treatment, overjet (FAG: 9 mm ± 2.8 (mean ± standard deviation); CG: 4 mm ± 1.7), ANB (FAG: 5.7° ± 2.0; CG: 3.2° ± 1.4), and effective mandibular length (FAG: 113.0 mm ± 4.1; CG: 116.6 mm ± 5.9) were statistically significantly different between the two groups. After treatment, overjet (FAG: -6.8 mm ± 2.8; CG: -1.8 mm ± 1.8) and effective mandibular length (FAG: 6.3 mm ± 2.6; CG: 3.9 mm ± 2.6) statistically significantly changed. There was a significant difference in the treatment effect between the FAG and the CG in overjet, ANB, and effective mandibular length. Conclusions: The results indicate that functional appliances are effective in correcting Class II malocclusions. The growth modification in the FAG resulted in an increase in mandibular length. Yet, the final length of the mandible in the FAG was smaller when compared to the CG.

Actual contribution ratio of maxillary and mandibular molars for total molar relationship correction during maxillary molar sequential distalization using clear aligners with Class II elastics: A finite element analysis

INTRODUCTION

Class II elastics, in combination with clear aligners (CA), are efficient for molar distalization. However, the effects of this combination on intermaxillary molar relationship correction have yet to be investigated. This study aimed to investigate the actual contribution ratio of the maxillary and mandibular molars for total molar relationship correction during maxillary molar distalization using Class II elastics with CA and further explore therapeutic recommendations for clinical practice.

METHODS

Finite element models (FEMs) were established, including the distalization of the second molars (Set I), followed by the distalization of the first molars (Set II). Model A simulated elastics attached by precision cutting, whereas Model B simulated elastics attached to buttons. Force magnitudes of 100 g, 150 g, and 200 g of force were applied. We recorded the contribution ratio of the maxillary and mandibular molars for total molar relationship correction, effective distalizing distance in 0.25 mm step distance, tipping and rotation angles, and the hydrostatic stress in the periodontal ligament.

RESULTS

During maxillary molar distalization, mesialization of the mandibular molar had a notable contribution ratio for molar relationship correction. The mandibular first molar was mesialized with mesiolingual rotation tendency. Approximately half of the 0.25 mm step distance was occupied by maxillary molar distalization; the remainder was occupied by anchorage teeth mesialization and tipping or rotation. When traction forces increased, the total molar relationship correction and effective distalization increased; the mandibular molars mesialization contribution ratio also increased, as did rotation and inclination tendency. Precision cutting had a higher total molar relationship correction and more effective distalization than a button but also had a larger contribution ratio of mandibular molar mesialization and inclination or rotation.

CONCLUSIONS

Mandibular molar mesialization should be considered when correcting the molar relationship using CA with intermaxillary elastics during maxillary molar distalization. It is also important to consider the anchorage teeth mesialization and undesired tipping or rotation.

Skeletal Class II Malocclusion: From Clinical Treatment Strategies to the Roadmap in Identifying the Genetic Bases of Development in Humans with the Support of the Collaborative Cross Mouse Population

Depending on how severe it is, malocclusion, which may involve misaligned teeth, jaws, or a combination of the two, can hurt a person's overall facial aesthetics. The maxillary molar develops before the mandibular molar in class II malocclusion, which affects 15% of the population in the United States. With a retrusive mandible, patients typically have a convex profile. The goal of this study is to classify the skeletal and dental variability present in class II malocclusion, to reduce heterogeneity, present the current clinical treatment strategies, to summarize the previously published findings of genetic analysis, discuss these findings and their constraints, and finally, propose a comprehensive roadmap to facilitate investigations aimed at determining the genetic bases of malocclusion development using a variety of genomic approaches. To further comprehend the hereditary components involved in the onset and progression of class II malocclusion, a novel animal model for class II malocclusion should be developed while considering the variety of the human population. To overcome the constraints of the previous studies, here, we propose to conduct novel research on humans with the support of mouse models to produce contentious findings. We believe that carrying out a genome-wide association study (GWAS) on a large human cohort to search for significant genes and their modifiers; an epigenetics-wide association study (EWAS); RNA-seq analysis; integrating GWAS and the expression of quantitative trait loci (eQTL); and the testing of microRNAs, small RNAs, and long noncoding RNAs in tissues related to the skeletal class II malocclusion (SCIIMO) phenotype, such as mandibular bone, gum, and jaw in humans and the collaborative cross (CC) mouse model, will identify novel genes and genetic factors affecting this phenotype. We anticipate discovering novel genetic elements to advance our knowledge of how this malocclusion phenotype develops and open the venue for the early identification of patients carrying the susceptible genetic factors so that we can offer early prevention treatment strategies.

Three-dimensional spatial analysis of the temporomandibular joint in adult patients with Class II division 2 malocclusion before and after orthodontic treatment: a retrospective study

BACKGROUND

To investigate changes in the three-dimensional (3D) spatial morphology of the temporomandibular joint (TMJ) and condyle position in adult patients with Class II division 2 malocclusion using a 3D spatial measurement method and to investigate the similarities and differences in the effects of fixed appliance and clear aligner treatments on the TMJ.

METHODS

Cone-beam computed tomography (CBCT) data of 47 adult patients with Class II division 2 malocclusion (25, fixed appliance group; 22, clear aligner group) were collected before and after treatment. Mimics 21.0 was used to reconstruct the TMJ 3D model. Fourteen measurement items, such as the anterior, upper, and posterior joint spaces, were measured directly on the 3D model and compared.

RESULTS

Post-orthodontic treatment, the shape and position of the condyle changed in adult patients with Class II division 2 malocclusion. Reduction in the anterior joint space and increase in the posterior joint space after orthodontic treatment were significant in both fixed appliance and clear aligner treatments; the condyle moved forward to the center of the fossa. The superior joint space and depth of the glenoid fossa increased after clear aligner treatment, but there was no significant change after fixed appliance treatment.

CONCLUSIONS

The condylar shape and position in patients with Class II division 2 malocclusion changed significantly post-treatment, indicating that the condyle undergoes adaptive reconstruction during orthodontic treatment in these patients. These results provide a reference for diagnosis, design of treatment plan, and monitoring of treatment in orthodontic clinics.

Numerical investigation of the biomechanical effects of orthodontic intermaxillary elastics on the temporomandibular joint

Temporomandibular joint disorder (TMD) often coincides with malocclusion, and in some cases TMDs are reported after orthodontic treatment. Intermaxillary elastics (also known as orthodontic elastics, OE) are a common way to apply force during orthodontic treatment, and they might cause mechanical effects on the temporomandibular joint (TMJ), thereby lead to joint remodeling. It is still a controversial topic whether the adapted remodeling of the TMJ or of the alveolar bone is the main cause for the alteration of occlusion after treatment with OEs. It was the aim of this study to analyze whether variations of OEs would develop harmful effects on the healthy TMJ. A TMJ model with a masticatory system based on Hill-type muscle actuators was established. Mouth opening and closure with and without OEs were simulated, and maximum principal stresses in the disc and condylar cartilage as well as the displacement of the mandible were analyzed. We found no considerably difference in the mandibular movement without and with symmetrical OEs during mouth opening and closing. At full mouth opening, stresses in the disc and condylar cartilage of some models with OEs were much smaller than without OEs, but we did not find consistency in the results from the left and right sides of the same model (e.g. the lowest compressive stress on the left side of disc from the model with Class II OEs is much smaller than without OEs, -17.3 MPa compared with -28.2, while on the right side, there was no obvious difference). Hence, we could not conclude that OEs would develop deleterious effects on the healthy TMJ.

Dental and Skeletal Effects of Herbst Appliance, Forsus Fatigue Resistance Device, and Class II Elastics-A Systematic Review and Meta-Analysis

Background: Our study aimed to systematically summarize the dentoskeletal effects of Herbst appliance; Forsus fatigue resistance device; and Class II elastics in adolescent Class II malocclusion. Methods: Five databases; unpublished literature; and reference lists were last searched in August 2022. Randomized clinical trials and observational studies of at least 10 Class II growing patients that assessed dentoskeletal effects through cephalometric/CBCT superimpositions were eligible. The included studies quality was assessed with the RoB 2 and ROBINS-I tools. A random-effects model meta-analysis was performed. Heterogeneity was explored with subgroup and sensitivity analyses. Results: Among nine studies (298 patients); two-to-three studies were included in each meta-analysis. Less post-treatment upper incisor retroclination (<2) and no overbite; overjet; SNA; SNB; and lower incisor inclination differences were found between Herbst/Forsus and Class II elastics. No differences in maxilla; condyle; glenoid fossa; and most mandibular changes were found between Herbst and Class II elastics; except for a greater 1.5 mm increase in mandibular length and right mandibular ramus height (1.6 mm) with Herbst. Conclusions: Herbst and Class II elastics corrected the molar relationship; but Herbst moved the lower molars more mesially. Apart from an additional mandibular length increase; no other dental and anteroposterior skeletal difference was found. Forsus was more effective in molar correction; overjet reduction; and upper incisor control than Class II elastics. Trial registration number OSF: 10.17605/OSF.IO/8TK3R.

Skeletal and dentoalveolar effects of class II malocclusion treatment using bi-maxillary skeletal anchorage: a systematic review

BACKGROUND

The goal of this systematic review was to assess the available evidence regarding the skeletal and dentoalveolar effects of bi-maxillary skeletal anchorage devices (BMSADs) used in treating growing class II malocclusion patients.

METHODS

A comprehensive search was conducted on PubMed, Scopus, Science Direct, Web of Science, Cochrane, and LILACS up to November 2021, which was augmented by a manual search. The studies included were clinical trials (RCTs) and/or follow-up observational studies (retrospective and prospective). The outcomes of interest were the skeletal, dentoalveolar, and occlusal treatment-induced changes obtained from pre- and post-cephalometric measurements. The risks of bias of the included studies were assessed using an assessment tool from previous publications.

RESULTS

Out of 742 screened articles, only 4 were eligible and thus included in the qualitative synthesis. They showed a moderate overall risk of bias. The results are presented as mean changes in both the study and control groups. All studies reported retrusion of the maxillary base and advancement of the mandible (meaning reduced ANB angle). Three of the included studies reported an increase in the vertical jaw relation, which was contrary to what the fourth study reported. Three studies reported an increase in the maxillary incisors' inclination or position, while one study reported their retroclination. Proclination of the mandibular incisors happened in two studies, whereas the other two studies reported retroclination. The overjet was reduced in all included studies.

CONCLUSION

Apart from the protrusive effects on the mandible, retrusive effects on the maxilla, and the consequent reduction of the overjet, BMSADs results in inconsistent skeletal and dentoalveolar effects. However, the current evidence is limited due to the variability in the biomechanics of the intermaxillary components, type of anchorage, and comparable groups in the included studies. Further RCTs with more standardized methodologies are highly encouraged.

CLINICAL RELEVANCE

BMSADs (using miniscrews or miniplates on both jaws) induces more skeletal than dentoalveolar effects. However, this must be practiced with caution, based on the benefit to risk (surgical insertion) ratio, and the limited evidence available in hand so far. Registration The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199601).

Effects of fixed functional appliances with temporary anchorage devices on Class II malocclusion: A systematic review and meta‑analysis

BACKGROUND

The use of fixed functional appliances (FFAs) in conjunction with temporary anchorage devices (TADs) has been proposed to enhance skeletal changes and reduce proclination of the lower incisors.

OBJECTIVES

To systematically investigate the skeletal and dentoalveolar effects of FFAs with TADs on Class II malocclusion in adolescents.

METHODS

Electronic searches of databases and manual searches of references were performed up to August 30, 2020. Randomized controlled trials (RCTs) and clinical controlled trials (CCTs) focusing on adolescent patients treated with FFAs combining TADs were included. The modified Cochrane risk-of-bias tool (R.O.B 2.0) and ROBINS-I (Risk of Bias in Non-randomized Studies-of Interventions) Tool were used to assess the risk of bias in RCTs and CCTs, respectively. Meta-analyses of SNA, SNB, ANB, Co-Gn, SN-MP, the lower and upper incisor inclination changes were performed. Subgroup analyses and sensitivity analyses were conducted based on TAD types, FFA types, record types and types of study designs.

RESULTS

Ten studies were included with a sample size of 281. Meta-analyses revealed significant differences in the changes in SNB (mean difference [MD] 0.67; 95% confidence interval [CI] 0.04-1.29), ANB (MD -1.22, 95% CI -2.04 to -0.39), Co-Gn (MD 1.57; 95% CI 0.22-2.92), inclination of the lower incisors (MD -5.64, 95% CI -7.78 to -3.50)] and inclination of the upper incisors (MD -1.91; 95% CI -3.69 to -0.13). TAD types and FFA types seem to affect the treatment outcome.

CONCLUSIONS

Compared with FFAs alone, FFAs with TADs exhibit superior skeletal effects and reduce the inclination of the lower incisors in the short term; however, the evidence showed moderate to high risk of bias. Registration number CRD42020177611.

Soft tissue profile changes in Angle class II patients treated with Twin Force or intermaxillary elastics-a comparison

PROPOSITION

This study aimed to compare soft tissue profile changes in Angle class II malocclusion patients treated with a Twin Force appliance (Ortho Organizers, Inc., Carlsbad, CA, USA) or class II elastics.

METHODS

The sample comprised 47 class II malocclusion patients treated orthodontically without extractions, divided into two groups. Group 1 (Twin Force): 25 patients were treated with the Twin Force, with initial and final mean ages of 17.91 and 20.45 years, respectively, and mean treatment time of 2.53 years. Group 2 (elastics): 22 patients were treated with class II elastics, with initial and final mean age of 15.87 and 18.63 years, respectively, and mean treatment time of 2.75 years. The lateral cephalograms were evaluated at the initial and final stages. Intragroup comparisons were performed with dependent t-tests and intergroup comparisons were performed with independent t-tests.

RESULTS

Treatment-related changes in the Twin Force group included reduction of facial convexity, retrusion of the upper lip, increase of the H‑Nose distance, and decrease in Sn‑H distance, indicating improvement in facial profile. In the elastics group, treatment resulted in an increase in nasolabial angle, retrusion of the upper lip, increase of the H‑Nose distance, and decrease in Sn‑H distance, indicating improvement in facial profile. The Twin Force group showed a greater reduction of the facial convexity with treatment than the elastics group.

CONCLUSIONS

Class II patients treated with the Twin Force appliance showed greater reduction in facial convexity than patients treated with class II elastics. The other soft tissue changes were similar for both groups.

Three-Dimensional Assessment of Mandibular Condylar Volume and Position Subsequent to Twin Block Functional Therapy of Skeletal Class II Malocclusion Accompanied by Low-Level Laser Therapy

This study aimed to evaluate and compare the effect of low-level laser therapy (LLLT) on mandibular condylar volume and position following treatment of a Class II malocclusion with a twin block (TB) appliance employing cone beam computed tomography (CBCT). Twenty-four growing patients, aged 9–12 years, were randomly allocated into control and laser groups. All patients were treated with a TB appliance. The patients in the laser group were treated weekly with a gallium–aluminum–arsenide (GaAlAs) diode laser around the temporomandibular joint (TMJ) region for three months. CBCT images were obtained before and after TB therapy and the changes in TMJ and skeletal variables were evaluated and compared among and between the groups. In the laser group, the condylar volume of the right and left sides significantly increased by 213.3 mm³ and 231.2 mm³, respectively (p < 0.05), whereas in the control group it significantly increased by 225.2 mm³, and 244.2 mm³, respectively (p < 0.05), with forward and lateral positioning of both sides. Furthermore, effective mandibular, ramus, and corpus lengths were increased, which were not significant between the groups. Low-Level Laser therapy accomplished no considerable effect on mandibular condylar volume and position following the functional orthopedic treatment of skeletal Class II malocclusions using a TB appliance.

Three-dimensional condylar changes from Herbst appliance and multibracket treatment: A comparison with matched Class II elastics

INTRODUCTION

The purpose of this study was to quantify and qualify the 3-dimensional (3D) condylar changes using mandibular 3D regional superimposition techniques in adolescent patients with Class II Division 1 malocclusions treated with either a 2-phase or single-phase approach.

METHODS

Twenty patients with Herbst appliances who met the inclusion criteria and had cone-beam computed tomography (CBCT) images taken before, 8 weeks after Herbst removal, and after the completion of multibracket appliance treatment constituted the Herbst group. They were compared with 11 subjects with Class II malocclusion who were treated with elastics and multibracket appliances and who had CBCT images taken before and after treatment. Three-dimensional models generated from the CBCT images were registered on the mandible using 3D voxel-based superimposition techniques and analyzed using semitransparent overlays and point-to-point measurements.

RESULTS

The magnitude of lateral condylar growth during the orthodontic phase (T2-T3) was greater than that during the orthopedic phase (T1-T2) for all condylar fiducials with the exception of the superior condyle (P <0.05). Conversely, posterior condylar growth was greater during the orthopedic phase than the subsequent orthodontic phase for all condylar fiducials (P <0.05). The magnitude of vertical condylar development was similar during both the orthopedic (T1-T2) and orthodontic phases (T2-T3) across all condylar fiducials (P <0.05). Posterior condylar growth during the orthodontic phase (T2-T3) of the 2-phase approach decreased for all condylar fiducials with the exception of the posterior condylar fiducial (P <0.05) when compared with the single-phase approach.

CONCLUSIONS

Two-phase treatment using a Herbst appliance accelerates condylar growth when compared with a single-phase regime with Class II elastics. Whereas the posterior condylar growth manifested primarily during the orthopedic phase, the vertical condylar gains occurred in equal magnitude throughout both phases of the 2-phase treatment regime.

Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

Objective

To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment.

Methods

Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption.

Results

Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG.

Conclusions

We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

Condyle-glenoid fossa relationship after Herbst appliance treatment during two stages of craniofacial skeletal maturation: A retrospective study

OBJECTIVES

To perform a three-dimensional evaluation of the position of the condyles in patients treated with Herbst appliance (HA) in two stages of cervical vertebral maturation.

SETTING AND SAMPLE POPULATION

Retrospective case-control study. Pubertal Herbst group (PHG; n = 24, mean age 14.5 years, CS 3 and CS 4) and pre-pubertal Herbst group (PPHG; n = 17, mean age 9.9 years, CS 1 and CS 2) were contrasted with comparison groups of non-orthopaedically treated Class II patients in pubertal (PCG; n = 17, mean age 13.9 years) and pre-pubertal maturational stages (PPCG; n = 18, mean age 10.6 years).

MATERIALS AND METHODS

Cone-beam computer tomography scans were taken before treatment (T0) and at T1 after 8 to 12 months. Point-to-point measurements of the displacement of the condyles between T0 and T1, relative to the glenoid fossae, were performed in the X, Y, Z and 3D perspectives. Qualitative assessments using semi-transparent overlays and colour mapping also were produced.

RESULTS

The displacement of the condyles within the glenoid fossae in the treated groups was small (<0.75 mm; P > .05). Relative to the glenoid fossa, condylar position at T1 was similar to T0 in pre-pubertal and pubertal groups (P > .05). Similar condylar rotations from T0 to T1 were observed in Herbst and comparison groups, and no significant difference was found between pre-pubertal and pubertal patients.

CONCLUSIONS

Regardless the stage of skeletal maturation, HA treatment did not change the condyle-glenoid fossa relationship.

What effect does functional appliance treatment have on the temporomandibular joint? A systematic review with meta-analysis

BACKGROUND

The aim of the current systematic review was to compare the radiologic effects of functional appliance Class II treatment compared to no treatment on the temporomandibular joint and its components.

METHODS

Nine databases were searched up to June 2019 for randomized or prospective non-randomized clinical trials comparing Class II patients treated with functional appliances to untreated patients. After duplicate study selection, data extraction, and risk of bias assessment with the Cochrane tool and the ROBINS-I tool, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by the assessment of the quality of evidence with GRADE.

RESULTS

A total of 11 papers on 8 unique trials with 377 patients (39.8% male; average age 10.3 years) were finally included. Limited evidence indicated that compared to untreated growing patients functional appliance treatment was associated with increased condylar width (2 studies; MD 1.1 mm; 95% CI 0.1 to 2.2 mm; very low evidence quality), decreased anterior joint space (2 studies; MD - 0.7 mm; 95% CI - 0.5 to - 0.9 mm; very low evidence quality), increased superior joint space (2 studies; MD 0.7 mm; 95% CI 0.5 to 1.0 mm; very low evidence quality), increased posterior joint space (2 studies; MD 1.0 mm; 95% CI 0.9 to 1.2 mm; very low evidence quality), and vertical displacement of the glenoid fossa (2 studies; MD 0.4 mm; 95% CI 0.1 to 0.7 mm; very low evidence quality). The main limitations affecting the validity of the present findings were the inclusion of non-randomized studies with methodological issues, imprecision due to limited samples of the included studies, and inconsistencies among studies.

CONCLUSIONS

Currently existing evidence from controlled clinical studies on humans indicates that functional appliance treatment is associated with positional and skeletal alterations of the temporomandibular joint in the short term compared to untreated controls. However, the clinical relevance of these changes remains unclear, while the quality of existing evidence is low due to methodological issues of existing studies.

REVIEW REGISTRATION

PROSPERO, CRD42018109271.

Are morphologic and topographic alterations of the mandibular fossa after fixed functional treatment detectable on tomograms? Visual classification and morphometric analysis

AIM

The goal was to evaluate if changes in morphology and topography of the mandibular fossa after Functional Mandibular Advancer (FMA) treatment are detectable on tomograms. Furthermore, the suitability of digital tomograms (DT) over magnetic resonance imaging (MRI) for this particular question was investigated.

MATERIALS AND METHODS

In all, 25 patients (14 female, 11 male) with a skeletal class II malocclusion received treatment with a FMA. DTs were available prior to (T1) and after (T2) FMA treatment. A total of 50 temporomandibular joints were investigated. The mandibular fossae were evaluated metrically and visually regarding treatment-induced alterations. A p < 0.05 was set as the level for statistical significance for all tests. Results were compared to the results of a recent MRI study.

RESULTS

Visual inspection of all 50 joints in the DT at T1 and T2 revealed no alterations of the fossa shape in the sagittal plane; 24 patients showed identical morphology of right and left joints. The metrical analysis revealed no significant changes regarding width, depth and ratio thereof between T1 and T2. There also were no bilateral differences. Another 18 different distance measurements between porion, mandibular fossa, articular eminence and pterygoid fossa showed no significant changes. There was no detectable proof of a fossa shift.

CONCLUSIONS

No changes in the sagittal plane, mandibular fossa, the articular tubercle, or a possible fossa shift were found in the DT of class II patients after FMA treatment. DT and MRI measurements and the visual inspection revealed identical findings; thus, DT appears to be a valuable research tool for sagittal analysis of mandibular fossa changes.

Three-dimensional treatment outcomes in Class II patients with different vertical facial patterns treated with the Herbst appliance

INTRODUCTION

The aims of this study were to evaluate, using 3-dimensional superimposition techniques, the skeletal changes in Class II subjects with different vertical facial patterns treated with the Herbst appliance and to compare these skeletal changes to those of Class II controls treated with elastics.

METHODS

Sixteen Herbst patients who met the inclusion criteria were divided into 2 equal groups based on vertical facial pattern as determined by the Frankfort mandibular plane angle (brachyfacial, ≤22°; mesofacial, 23°-29°) and had cone-beam computed tomographs taken before treatment, 8 weeks after Herbst appliance removal, and after subsequent fixed appliance treatment. Eleven Class II control patients treated with fixed appliances and elastics had cone-beam computed tomographs taken before and after treatment. Three-dimensional models were generated from the cone-beam computed tomography images, registered on the anterior cranial bases, and analyzed using color maps and point-to-point measurements.

RESULTS

There were minimal differences in treatment response between the 2 Herbst groups across all skeletal parameters measured. The Herbst subjects showed a greater inferior displacement of anterior nasal spine compared with the Class II controls (Herbst brachyfacial, -1.44 mm; Herbst mesofacial, -1.95 mm) with other maxillary changes being clinically insignificant. The Herbst subjects showed greater inferior displacement of B-point compared with the Class II controls (Herbst brachyfacial, -2.59 mm; Herbst mesofacial, -2.75 mm). There were no statistically significant differences in mean linear mandibular measurements. All groups showed a trend toward posterior displacement of the condyles and glenoid fossae from the start to the end of treatment, with no significant differences across the 3 groups. There were minimal differences in the changes in gonial angle and Frankfort mandibular plane angle across all groups.

CONCLUSION

Approximately 2 years after Herbst treatment, the Herbst subjects with different vertical facial patterns showed similar patterns of skeletal change compared with the Class II controls treated with elastics.

Three-dimensional skeletal mandibular changes associated with Herbst appliance treatment

OBJECTIVES

Three-dimensional evaluation of skeletal mandibular changes following Herbst appliance treatment.

SETTING AND SAMPLE POPULATION

Retrospective case-control study, based on a sample size calculation. Twenty-five pubertal patients treated with Herbst appliance (HAG), and 25 matched Class II patients who received other non-orthopaedic dental treatments (CG).

MATERIAL AND METHODS

Three-dimensional models were generated from pre-treatment (T0) and post-treatment (T1) cone beam computed tomograms. Volumetric registration on the cranial base was used to assess mandibular displacement; volumetric regional registration was performed to evaluate mandibular growth. Quantitative measurements of X, Y, Z and 3D Euclidian changes, and also qualitative visualization by colour-mapping and semi-transparent overlays were obtained.

RESULTS

Downward displacement of the mandible was observed in both HAG and CG (2.4 mm and 1.5 mm, respectively). Significant forward displacement of the mandible was observed in the HAG (1.7 mm). HAG showed greater 3D superior and posterior condylar growth than the CG (3.5 mm and 2.0 mm, respectively). Greater posterior growth of the ramus was noted in the HAG than in CG.

CONCLUSIONS

Immediately after Herbst therapy, a significant mandibular forward displacement was achieved, due to increased bone remodelling of the condyles and rami compared to a comparison group. Three-dimensional changes in the direction and magnitude of condylar growth were observed in Herbst patients.

Treatment changes of hypo- and hyperdivergent Class II Herbst patients

OBJECTIVES

To determine the relative effects of Herbst appliance therapy in hypo- and hyperdivergent patients.

MATERIALS AND METHODS

The treated group included 45 growing Class II, division 1, patients treated with stainless steel crown Herbst appliances, followed by fixed edgewise appliances. The untreated control group consisted of 45 Class II, division 1, subjects, matched to the treated sample based on Angle classification, age, sex, and pretreatment mandibular plane angle (MPA). Subjects were categorized as hypo- or hyperdivergent based on their MPAs. Pre- and posttreatment cephalograms were traced and superimposed on cranial base and mandibular structures.

RESULTS

The primary effect of the Herbst in terms of maxillomandibular correction was in the maxilla. It significantly restricted maxillary growth, producing a "headgear effect." Mandibular treatment changes depended on divergence. Hyperdivergent patients experienced a deleterious backward true mandibular rotation with Herbst treatment. Hypodivergent patients, as well as untreated hypo- and hyperdivergent controls, underwent forward true mandibular rotation. However, hypodivergent chins did not advance any more than expected for untreated hypodivergent Class II patients.

CONCLUSIONS

Hypo- and hyperdivergent patients benefit from the Herbst's headgear effect. While the mandibular growth of hypodivergent patients overcomes the negative rotational effects, hyperdivergent patients undergo a deleterious backward mandibular rotation and increases in facial height.

Impact of functional mandibular advancement appliances on the temporomandibular joint - a systematic review

Background

Although many orthodontists have no doubts about the effectiveness of functional appliances for mandibular advancement, the impact on the temporomandibular joint (TMJ) is still in dispute. The objective of this systematic review is to examine the main effects on the TMJ of using functional appliances, both in healthy patients and in patients with a pre-existing disorder.

Material and Methods

A systematic review of the literature was conducted in accordance with the PRISMA guidelines. Only systematic reviews, meta-analyses, randomized clinical trials (RCTs), case-control studies and cohort studies were included. A detailed language-independent electronic search was conducted in the Pubmed, Scopus, Cochrane Library and Embase databases. All studies published between 2000 and 2015 were included.

Results

A total of 401 articles were identified. Of these, 159 were duplicates and were excluded. On reading the title and abstract, 213 articles were excluded because they did not answer the research question, leaving a total of 29 articles. These articles were read and assessed. Following critical reading of the full text, eight articles were excluded: seven because they were considered of low quality and one because it published redundant data. As a result, 21 articles were included.

Conclusions

After treatment with functional appliances, the condyle was found to be in a more advanced position, with remodelling of the condyle and adaptation of the morphology of the glenoid fossa. No significant adverse effects on the TMJ were observed in healthy patients and the appliances could improve joints that initially presented forward dislocation of the disk.

Key words:Temporomandibular joint, TMJ, orthodontic appliances, functional, mandibular advancement, herbst appliance, bionator.

Treatment effects of removable functional appliances in patients with Class II malocclusion: a systematic review and meta-analysis

OBJECTIVE

To assess the treatment effects of removable functional appliances (RFAs) in treated versus untreated patients with Class II malocclusion by means of lateral cephalometric radiographs.

SEARCH METHODS

Unrestricted electronic search of 18 databases and manual searches up to October 2013.

SELECTION CRITERIA

Prospective randomized and non-randomized controlled trials reporting on cephalometric angular measurements of Class II patients treated with RFAs and their matched controls.

DATA COLLECTION AND ANALYSIS

Skeletal, dental, and soft tissue changes were annualized and stratified to short- and long-term effects. Methodological limitations were evaluated with the Cochrane Risk of Bias tool and the Downs and Black checklist. Mean differences (MDs) with their 95% confidence intervals (CIs) were calculated from random-effects meta-analyses. Patient- or appliance-related subgroup analyses and sensitivity analyses were performed with mixed-effects models.

RESULTS

Seventeen studies were included (1031 patients; mean age: 10.6 years), with most of them originating from university clinics and reporting short-term effects (directly after the removal of RFAs). Treatment was associated with minimal reduction of SNA angle (11 studies, MD = -0.28 degree/year, 95% CI: -0.44 to -0.12 degree/year), minimal increase of SNB angle (11 studies, MD = 0.62 degree/year, 95% CI: 0.36-0.88 degree/year), and small decrease of ANB angle (10 studies, MD = -1.14 degree/year, 95% CI: -1.52 to -0.77 degree/year) compared to untreated Class II patients. RFAs caused significant dentoalveolar changes (predominantly retroclination of the upper incisors) and significant soft tissue changes. Skeletal changes were more pronounced with the Twin Block appliance. Various patient- or appliance-related factors influenced the results of the subgroup analyses, while the sensitivity analyses indicated robustness. Existing evidence was inadequate to assess the long-term effectiveness of RFAs.

CONCLUSIONS

The short-term evidence indicates that RFAs are effective in improving Class II malocclusion, although their effects are mainly dentoalveolar, rather than skeletal.

Expression of matrix metalloproteinases-8 and -9 and their tissue inhibitor in the condyles of diabetic rats with mandibular advancement

The present study aimed to evaluate the effects of type 1 diabetes mellitus on the condylar response during treatment with a functional appliance. Sprague-Dawley rats were divided into 3 groups, normal (NG), diabetes (DG) and diabetes with insulin-treatment (TG). Bite-jumping appliances were fitted to the rats in the experimental groups. At 7, 14, 21 and 28 days following fitting, animals were sacrificed and condyles were excised and processed using routine histological techniques. The expression of matrix metalloproteinase (MMP)-8, MMP-9 and tissue inhibitor of metalloproteinase-1 (TIMP-1) was detected using immunohistochemical analysis. Mandibular advancement increased the expression levels of MMP-8 (peaked on day 28), MMP-9 (peaked on day 21), TIMP-1 (peaked on days 21 and 28) and the ratio of MMP-8 to TIMP-1 and MMP-9 to TIMP-1. In the DG, diabetes decreased the expression levels of MMP-8 and MMP-9 induced by mandibular advancement and increased the expression levels of TIMP-1 compared with that of the NG. The ratio of MMP-8 to TIMP-1 and MMP-9 to TIMP-1 also showed a significant decrease in the DG compared with that of the NG. A recovery of these parameters was observed in the TG. Diabetes significantly altered the condylar response, which was triggered by mandibular advancement, and weakened subsequent bone deposition. The results from the TG were not significantly different from that of the NG.

Three-dimensional treatment outcomes in Class II patients treated with the Herbst appliance: a pilot study

INTRODUCTION

The aims of this study were to analyze 3-dimensional skeletal changes in subjects with Class II malocclusion treated with the Herbst appliance and to compare these changes with treated Class II controls using 3-dimensional superimposition techniques.

METHODS

Seven consecutive Herbst patients and 7 Class II controls treated with Class II elastics who met the inclusion criteria had cone-beam computed tomographs taken before treatment, and either after Herbst removal or at posttreatment for the control subjects. Three-dimensional models were generated from the cone-beam computed tomography images, registered on the anterior cranial bases, and analyzed using color maps and point-to-point measurements.

RESULTS

The Herbst patients demonstrated anterior translation of the glenoid fossae and condyles (right anterior fossa, 1.69 ± 0.62 mm; left anterior fossa, 1.43 ± 0.71 mm; right anterior condyle, 1.20 ± 0.41 mm; left anterior condyle, 1.29 ± 0.57 mm), whereas posterior displacement predominated in the controls (right anterior fossa, -1.51 ± 0.68 mm; left anterior fossa, -1.31 ± 0.61 mm; right anterior condyle, -1.20 ± 0.41 mm; left anterior condyle, -1.29 ± 0.57 mm; P <0.001). There was more anterior projection of B-point in the Herbst patients (2.62 ± 1.08 mm vs 1.49 ± 0.79 mm; P <0.05). Anterior displacement of A-point was more predominant in the controls when compared with the Herbst patients (1.20 ± 0.53 mm vs -1.22 ± 0.43 mm; P <0.001).

CONCLUSIONS

Class II patients treated with the Herbst appliance demonstrated anterior displacement of the condyles and glenoid fossae along with maxillary restraint when compared with the treated Class II controls; this might result in more anterior mandibular projection.

Temporomandibular joint changes after activator appliance therapy: a prospective magnetic resonance imaging study

The aim of this prospective clinical and magnetic resonance imaging study was to analyze the effect of 1-year Activator (Yi-fan Dental Co., Shanghai, China) treatment in internal anatomical relationships of the temporomandibular joint (TMJ) complex, including the condyle-disc relationship, condyle-fossa relationship, condylar height change, disc length change, and morphologic change of the glenoid fossa. The study was composed of patients with class II division 1 malocclusion (11 girls and 13 boys) who underwent 1-year Activator treatment. All the patients were in the acceleration or peak phase of the pubertal growth spurt. Magnetic resonance imaging in closed-mouth position and lateral cephalometric radiographs before and after 1 year of Activator treatment were analyzed metrically. Overall, condylar height showed a significant increase (P < 0.001), and the eminence angle decreased (P = 0.037). TMJ disc length has no statistically significant change before and after treatment. A slight advancement (P = 0.041) was found in the sagittal condylar position. A significant backward movement (P = 0.04) was shown in the sagittal disc position. Our results showed that the disc is not impaired by Activator therapy; it seems possible that adaptive remodeling, including a shallower glenoid fossa and increased condylar height, was seen after treatment.

Correction of Class II malocclusion with Class II elastics: a systematic review

INTRODUCTION

Although Class II elastics have been widely used in the correction of Class II malocclusions, there is still a belief that their side effects override the intended objectives. The aim of this systematic review was to evaluate the true effects of Class II elastics in Class II malocclusion treatment.

METHODS

A search was performed on PubMed, Scopus, Web of Science, Embase, Medline, and Cochrane databases, complemented by a hand search. Study eligibility criteria were the application of Class II elastics in Class II malocclusion treatment and the presentation of dental or skeletal outcomes of treatment. All age groups were included.

RESULTS

The search identified 417 articles, of which 11 fulfilled the inclusion criteria. Four studied the isolated effects of Class II elastics, and 7 were comparisons between a single use of elastics and another method for Class II malocclusion correction. Because of the differences in treatment modalities in these articles, a meta-analysis was not possible.

CONCLUSIONS

Based on the current literature, we can state that Class II elastics are effective in correcting Class II malocclusions, and their effects are primarily dentoalveolar. Therefore, they are similar to the effects of fixed functional appliances in the long term, placing these 2 methods close to each other when evaluating treatment effectiveness. Little attention has been given to the effects of Class II elastics on the soft tissues in Class II malocclusion treatment.

The biology of TMJ growth modification: a review

Several studies have indicated a positive response of the temporomandibular joint (TMJ) to mandibular advancement, while others have reported that TMJ adaptive responses are non-existent and negligible. Controversy continues to grow over the precise nature of skeletal changes that occur during mandibular growth modification, due to an apparent lack of tissue markers required to substantiate the precise mechanism by which this is occurring. However, evidence suggests that orthopedic forces clinically modify the growth of the mandible. To further our knowledge about the effect of orthopedic treatment on the TMJ, it is necessary that we understand the biologic basis behind the various tissues involved in the TMJ's normal growth and maturation. The importance of this knowledge is to consider the potential association between TMJ remodeling and mandibular repositioning under orthopedic loading. Considerable histologic and biochemical research has been performed to provide basic information about the nature of skeletal growth modification in response to mandibular advancement. In this review, the relevant histochemical evidence and various theories regarding TMJ growth modification are discussed. Furthermore, different regulatory growth factors and tissue markers, which are used for cellular and molecular evaluation of the TMJ during its adaptive response to biomechanical forces, are underlined.