Dentofacial characteristics in orthodontic patients with centric relation-maximum intercuspation discrepancy

Three-Dimensional Distance Mapping Method to Evaluate Mandibular Symmetry and Morphology of Adults with Unilateral Premolar Scissors Bite

(1) Objective: This study aimed to evaluate the association between unilateral premolar scissors bite and mandibular symmetry of adults via the 3D distance mapping method. (2) Methods: A total of 53 cone-beam computed tomography (CBCT) images of adults with unilateral premolar scissors bite were set as study samples. A total of 53 age- and sex-matched samples without scissors bite were in the control group. Three-dimensional mandibular models and seven mandibular functional units, including condylar process (Co), coronoid process (Cr), mandibular ramus (Ra), mandibular angle (Ma), alveolar process (Ap), mandibular body (Mb), and chin process (Ch) were constructed and mirrored. After superimposition of the original and the mirrored models, 3D distance maps and deviation analysis were performed to evaluate the mandibular symmetry and morphology. (3) Results: In the study group, the matching percentages of the entire mandible (50.79 ± 10.38%), Ap (67.00 ± 12.68%), Mb (66.62 ± 9.44%), Ra (62.52 ± 11.00%), Ch (80.75 ± 9.86%), and Co (62.78 ± 13.56) were lower than that of the entire mandible (58.60 ± 5.52) (p < 0.01), Ap (73.83 ± 8.88%) (p < 0.01), Mb (72.37 ± 8.69%) (p < 0.01), Ra (68.60 ± 7.56%) (p < 0.01), Ch (85.23 ± 6.80%) (p < 0.01), and Co (67.58 ± 10.32%) (p < 0.05) in the control group. However, Cr and Ma showed no significant difference (p > 0.05). (4) Conclusions: The 3D distance mapping method provided a qualitative and quantitative mandibular symmetry and morphology assessment. Mandibular asymmetry was found in adults with unilateral premolar scissors bites. Mandibular functional units, including the alveolar process, mandibular body, mandibular ramus, chin process, and condylar process, showed significant differences, while no significant difference was observed in the coronoid process and mandibular angle.

The Role of Maxillofacial Structure on Condylar Displacement in Maximum Intercuspation and Centric Relation

Purpose

This study is aimed at evaluating the impact of the craniofacial structure and occlusal conditions on the position of the articular heads of the mandibular condyles in the maximum intercuspal position (MIP) and comparing the centric relation (CR) and MIP of the mandibular condyles prior to orthodontic treatment.

Methods

The studied group consisted of 33 women and 15 men (median age of 17.75 years). Contact points of opposing teeth in the MIP were assessed by hand-held casts. Condylar displacement (CD) in three spatial planes on both sides was measured on models mounted in an articulator using a mandibular position indicator (MPI). Patients were divided into groups according to craniofacial structures (vertical and horizontal growth directions). The Mann-Whitney, Kruskal-Wallis, post hoc Dwass-Steel-Critchlow-Fligner, and Pearson's χ² independence tests as well as Spearman's nonparametric correlations were used in the statistical analyses.

Results

Within the limitations of this study, no statistically significant correlation of CD with certain cephalometric measurements from a lateral cephalometric radiograph (ANB, SN-ML, and SGo/NMe) was observed. Correlation, however, was found between condylar displacement in the transverse axis and the mandibular plane angle SN-ML (p = 0.033) and also between condylar displacement in the anteroposterior axis and a midline shift of the mandible (p = 0.041). The results revealed a relationship between Angle's classification of molar position on the right side and anteroposterior CD values (p = 0.006).

Conclusions

Cephalometric measurements cannot be used to predict CD at the level of the condyles. Analysis of occlusal conditions of models mounted in an articulator is desirable for patients with Angle's class I and lower jaw asymmetry.

The Law of Minimum Vertical Dimension: Evidence for Improvement of Dental Occlusion

The law of minimum vertical dimension (MVD) states that “when the mandible moves to reach the maximum intercuspal position, this always involves bringing the mandible and maxilla as close together as possible.” Therefore, after the first occlusal contact is made, the MIP will be reached through reduction of the vertical dimension. Our objective of this study, through an integrative review of the literature review, was to determine whether ignoring this law is a factor that contributes to malocclusion, temporomandibular joint dysfunction, and recurrences of functional orthodontic and orthopedic treatments.We conducted a search of the literature in five of the main electronic scientific databases. The following medical subject heading terms were used in our search: centric relation, dental occlusion, malocclusion, vertical dimension, and mastication. We cross-referenced the descriptors in the following four groups: centric relation and maximum intercuspation; occlusal plane and malocclusion; neuro-occlusal rehabilitation; and vertical dimension and unilateral chewing. From this, we selected 277 potentially eligible articles. Out of these, 209 were excluded in accordance with the exclusion criteria already described. Thus, 65 studies were included in the qualitative synthesis.The articles were also classified according to their impact factor and degree of recommendation, in conformity with the table of the Oxford Centre for Evidence-Based Medicine. The scientific interest in the scope of the articles was also assessed by using three charts developed according to year and country of publication and the percentage of publication. Unilateral chewing creates a vicious cycle of damage that leads to an ever-increasing masticatory deficiency. Most of the articles chosen for this review confirmed that noncompliance with law of MVD was a predisposing factor in cases of relapse, in functional orthodontic and orthopedic treatments, as well as a causal factor in malocclusion and in functional and morphological TMJ dysfunctions.

The Relationship Between Centric Occlusion and The Maximal Intercuspal Position and Their Use as Treatment Positions for Complete Mouth Rehabilitation: Best Evidence Consensus Statement

PURPOSE

The purpose of this Best Evidence Consensus Statement was to evaluate the existing literature relative to two focus questions: How often does centric occlusion coincide with maximal intercuspal position in dentate and partially dentate populations?; and should centric occlusion or maximal intercuspal positions be equivalent for dentate and partially dentate patients undergoing complete mouth rehabilitation?

MATERIALS AND METHODS

Keywords used in the initial search were: intercuspal position, centric occlusion, centric relation, maximal intercuspal position, prosthodontic rehabilitation, and occlusion. The search was then limited to Systematic Reviews, Randomized Controlled Studies, Meta-analyses and Clinical Trials.

RESULTS

The initial search strategy related to the selected search terms resulted in more than 15,000 articles. When the subsequent search was limited to Systematic Reviews, Randomized Controlled Studies, and Meta-Analysis and Clinical Trials, 313 articles were selected for further analysis.

CONCLUSIONS

Review of the literature reveals that most dentate and partially dentate patients do not have coincident centric occlusion and maximal intercuspal position. There is support for coincidence between centric occlusion and maximal intercuspal position as the preferred occlusal relationship in complete mouth rehabilitations. The literature does not report conclusive evidence of adverse prosthodontic outcomes with complete rehabilitations in centric occlusion or maximal intercuspal position in a healthy population. However, there is support for an association between centric occlusion-maximal intercuspal position discrepancies and occlusal instability as well as temporomandibular joint disorders. Hence, it is concluded that partially and completely dentate patients requiring complete mouth rehabilitation should be restored in centric occlusion.

[Research progress on the relationship between centric relation and orthodontic treatment]

Centric relation (CR) is one of the core research contents in orthodontics, prosthodontics, and gnathology, acting as an important physiological factor in reconstructing the occlusion and adjusting the occlusal relationship. For over a century, CR is still a controversial subject in dentistry. CR has been redefined for several times, and recently, its application has been widened in orthodontics, including orthodontic diagnosis, clinical examination and analysis, and treatment goals. The purpose of this article is to review the definition of CR, its relationship with malocclusion, and the application of this relationship in orthodontic treatment.

The Use of Mini-Plates for the Treatment of a High-Angle, Dual Bite, Class II Malocclusion

To present a case report of an orthodontic treatment of a high-angle, dual bite, Class II malocclusion without extractions and with the use of mini-plates. Class II malocclusion treatment protocols vary according to the morphological component of the malocclusion and the magnitude and direction of craniofacial growth. It is generally agreed that the cooperation of the patient and careful planning of anchorage are the key determinants of successful treatment. Protrusion of the upper and lower lip and a retrognathic mandible were the patient's chief concerns. The patient had learned to project her mandible forward to disguise the overjet. The patient's parents elected to correct the malocclusion with the use of bilateral infrazygomatic mini-plates. Pre-treatment condylar stabilization with an orthotic established a stable centric relation position, followed by mounting of the models on a semi-adjustable Panadent articulator. This allowed diagnosis and treatment planning from a stable condylar position and eliminated possible misdiagnosis due to the dual bite. Distal retraction and vertical control of the upper teeth enabled correction of the Class II malocclusion with minimal patient cooperation. Mini-plate-assisted treatment corrected the excessive overbite and overjet. The patient completed treatment with a stable occlusion and no longer postured her jaw forward. The parents and patient were completely satisfied with the positive treatment outcome. A 2-year follow-up confirmed the clinical stability.

Centric relation-intercuspal position discrepancy and its relationship with temporomandibular disorders. A systematic review

OBJECTIVE

The objective of this study is to assess the relationship between centric relation-intercuspal position discrepancy (CR-ICP discrepancy) and temporomandibular disorders (TMDs), by systematically reviewing the literature.

MATERIALS AND METHODS

A systematic research was performed between 1960 and 2016 based on electronic databases: PubMed, Cochrane Library, Medline, Embase, Scopus, EBSCOhost, BIREME, Lilacs and Scielo, including all languages. Analytical observational clinical studies were identified. Two independent authors selected the articles. PICO format was used to analyze the studies. The Newcastle-Ottawa Scale (NOS) was used to verify the quality of the evidence.

RESULTS

Four hundred and sixty-seven potentially eligible articles were identified. Twenty studies were analyzed, being grouped according to intervention in studies in orthodontic patients (n = 3) and studies in subjects without intervention (n = 17). Quality of evidence was low, with an average score of 3.36 according to Newcastle-Ottawa Scale. In most studies, the presence of CR-ICP discrepancy is associated with the presence of muscle (pain) and joint disorders (noise, disc displacement, pain, crepitus, osteoarthritis and osteoarthrosis). However, the lack of consistency of the results reported reduces the validity of the studies making it impossible to draw any definite conclusions.

CONCLUSIONS

Because of the heterogeneity of the design and methodology and the low quality of the articles reviewed, it is not possible to establish an association between CR-ICP discrepancy and TMD. The consequence of CR-ICP discrepancy on the presence of TMD requires further research, well-defined and validated diagnostic criteria and rigorous scientific methodologies. Longitudinal studies are needed to identify CR-ICP discrepancy as a possible risk factor for the presence of TMD.

The relevance analysis of hyoid bone position to skeletal or dental openbite and dentofacial characteristics

OBJECTIVE

The aim of this study was to investigate the relationship between the hyoid bone position and skeletal or dental openbite and to investigate dentofacial characteristics as indicated by the hyoid bone position.

STUDY DESIGN

In our study, 182 patients were included on the basis of skeletal and dental openbite. The hyoid bone position of the subjects was compared and evaluated. In addition, by dividing the samples according to the hyoid bone position, dentofacial characteristics of the subjects were compared and analyzed.

RESULTS

There were significant differences in the hyoid bone position according to the skeletal pattern, not dental pattern. The skeletal openbite group showed low hyoid bone position. In addition, the low hyoid bone group showed short ramus height, short posterior facial height, retrusive chin, and clockwise-rotated mandible.

CONCLUSIONS

Patients with low hyoid bone had a tendency toward skeletal openbite, even though there was no dental openbite. Moreover, low hyoid bone position had relevance to retrognathic dentofacial characteristics.