A facile approach to manufacturing non-ionic surfactant nanodipsersions using proniosome technology and high-pressure homogenization

Formulation of Glibenclamide proniosomes for oral administration: Pharmaceutical and pharmacodynamics evaluation

Glibenclamide (GB), oral antidiabetic sulfonylurea, is used in the management of diabetes mellitus type II. It suffers from low bioavailability due to low water solubility. This work aimed to enhance the dissolution of GB by formulating the drug as a proniosomes which then improves the pharmacological effect. GB proniosomal formulations were prepared using a slurry method with sucrose as a carrier. The formulations were characterized by particle size, zeta potential, entrapment efficiency %, flow properties of the powder, and in vitro dissolution study. The pharmacological effect was also assessed by determining and measuring the fasting blood glucose level (BGL) before and after the treatment. Formulating GB proniosomes with the slurry method produces a free-flowing powder with a particle size range from 190.050 ± 43.204 to 1369.333 ± 150.407 nm and the zeta potential was above 20 mV (-24 to -58 mV), indicating good stability. The dissolution rate for all formulations was higher than that of the pure drug, indicating the efficiency of the proniosome in enhancing the drug solubility. A significant reduction in the fasting blood glucose level (73 %) was observed in animals treated with proniosomal formulation with no sign of liver damage. In contrast, the pharmacodynamics results show a significant reduction in fasting blood glucose level for animals treated with proniosomes compared to a 17.6 % reduction in BGL after treatment with pure drug. Moreover, the histopathological results showed no sign of liver damage that occurred with proniosomal treatment. GB proniosomal formulations is a promising drug delivery system with good therapeutic efficacy and stability.

A novel method for the microencapsulation of curcumin by high-pressure processing for enhancing the stability and preservation

Curcumin is used for the development of new pharmaceutical and food products, but its application is generally hindered by the poor solubility of curcumin and thermal instability during storage and processing. In this study, the liposomes of curcumin (cur-liposomes) were prepared by a novel combination of ethanol injection and high-pressure processing (HPP) to enhance the stability and preservation of curcumin. The pasteurization, mean particle size, size distribution, and encapsulation efficiency of cur-liposomes and the kinetics of their thermal degradation were also investigated in this research. From the results, the kinetic rate constants of curcumin in samples of free curcumin and cur-liposome at 25 °C were found to be 1.6 × 10^-3 and 0.8 × 10^-3 min^-1, respectively. The phospholipid bilayer structure could protect curcumin. The results propose that the HPP method for liposome preparation is superior to the probe-sonication method in terms of stability, encapsulation efficiency, and homogeneity. Furthermore, the preparation of cur-liposomes by HPP with a hydrostatic pressure of 200 MPa could maintain the optimal particle size (206.4 nm) and polydispersity index (0.19). Conclusively, the combination of ethanol injection and HPP can not only successfully inactivate the microorganisms during liposome preparation for microencapsulation of bioactive compounds but also effectively preventthe thermal degradation of heat-sensitive substances in non-thermal processing for practical applications.

Simulation, In Vitro, and In Vivo Cytotoxicity Assessments of Methotrexate-Loaded pH-Responsive Nanocarriers

In this study, pH-responsive niosomal methotrexate (MTX) modified with ergosterol was prepared for potential anticancer application. The prepared formulation had a size of 176.7 ± 3.4 nm, zeta potential of −31.5 ± 2.6 mV, EE% of 76.9 ± 2.5%, and a pH-responsive behavior in two different pHs (5.4 and 7.4). In-silico evaluations showed that MTX intended to make a strong hydrogen bond with Span 60 compartments involving N2 and O4 atoms in glutamic acid and N7 atom in pteridine ring moieties, respectively. The cytotoxic effects of free and pH-MTX/Nio were assessed against MCF7 and HUVECs. Compared with free MTX, we found significantly lower IC50s when MCF7 cells were treated with niosomal MTX (84.03 vs. 9.464 µg/mL after 48 h, respectively). Moreover, lower cell killing activity was observed for this formulation in normal cells. The pH-MTX/Nio exhibited a set of morphological changes in MCF7 cells observed during cell death. In-vivo results demonstrated that intraperitoneal administration of free MTX (2 mg/kg) after six weeks caused a significant increase in serum blood urea nitrogen (BUN), serum creatinine, and serum malondialdehyde (MDA) levels of rats compared to the normal control rats. Treatment with 2 and 4 mg/kg doses of pH-MTX/Nio significantly increased serum BUN, serum creatinine, and serum lipid peroxidation. Still, the safety profile of such formulations in healthy cells/tissues should be further investigated.

Quality by Design Approach for the Development of Liposome Carrying Ghrelin for Intranasal Administration

The therapeutic use of peptides has increasingly recognized in the development of new therapies. However, the susceptible enzymatic cleavage is a barrier that needs to overcome. Nose-to-brain delivery associated with liposomes can protect peptides against biodegradation and improve the accessibility to brain targets. The aim was to develop a liposomal formulation as ghrelin carrier. The quality by design (QbD) approach was used as a strategy for method development. The initial risk assessments were carried out using a fishbone diagram. A screening design study was performed for the critical material attributes/critical process parameters (CMAs/CPPs) on critical quality attributes (CQAs). Liposomes were obtained by hydrating phospholipid films, followed by extrusion or homogenization, and coated with chitosan. The optimized liposome formulation was produced by high-pressure homogenization coated with chitosan, and the resulted were liposomes size 72.25 ± 1.46 nm, PDI of 0.300 ± 0.027, the zeta potential of 50.3 ± 1.46 mV, and encapsulation efficiency of 53.2%. Moreover, chitosan coating improved performance in ex vivo permeation and mucoadhesion analyzes when compared to the uncoated liposome. In this context, chitosan coating is essential for the performance of the formulations in the ex vivo permeation and mucoadhesion analyzes. The intranasal administration of ghrelin liposomes coated with chitosan offers an innovative opportunity to treat cachexia.

Facile L-Glutamine delivery to erythrocytes via DOPC-DPPG mixed liposomes

Sickle cell disease (SCD) is a mortal erythrocyte-based disease which is hard to treat effectively. Development of a treatment method that can prevent deoxygenation of erythrocytes or reduce the oxidative stress of sickle erythrocytes is one of the important issues towards SCD. Among a wide variety of potential drug carriers, liposomes are advantageous and preferable with their easy preparation and biocompatibility. In this study, L-Glutamine (Gln) loaded liposomes were prepared with 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-Dioleoyl-sn-glycero-3-phospho-rac-(1-glycerol) sodium salt (DPPG). Liposomes were characterized via zeta potential, size measurements, differential scanning calorimetry, Fourier Transform Infra-red Spectroscopy and they were visualized via transmission electron microscopy and scanning electron microscopy. Effect of the encapsulated amount of Gln was investigated by encapsulating Gln at three different concentrations (i.e0.20 mM, 40 mM and 60 mM). Drug encapsulation and release studies were implemented with high pressure liquid chromatography (HPLC). The encapsulation efficiency of Gln was determined to be the higher than the ones reported in the literature: 83.6%, 87.1% and 84.9% for 20 mM, 40 mM and 60 mM Gln, respectively. It was found that after 6 hours, liposomes loaded with 60 mM of Gln had released 45.7% of Gln. Optical microscopy images of the erythrocytes after 3 hours of incubation and haemolysis measurements proved that presence of liposomes did not cause any structural changes on the erythrocyte shape. Overall, it was concluded that L-Gln loaded PC/PG liposomes provide promising results in terms of developing a new drug delivery platform for SCD.

Drug-Excipients Compatibility Studies in Proniosomal Formulation: A Case Study with Resveratrol

Proniosomal drug delivery system is one of the advancements in nanotechnology. Similarly to traditional dosage forms, chemical and physical compatibility of proniosomes components with the active ingredient(s) is a key step in the preformulation process of such systems. In this work, the compatibility of resveratrol with selected excipients in the development of proniosomal formulation was investigated by thermal and spectroscopic techniques. To evaluate the drug-excipient compatibility, different techniques such as differential scanning calorimetric study, attenuated total reflectance Fourier transform infrared spectroscopy study and powder X-ray diffraction were adopted. The results showed that the excipients used in the formulation were compatible with resveratrol.

Fabrication, characterization and optimization of nanostructured lipid carrier formulations using Beclomethasone dipropionate for pulmonary drug delivery via medical nebulizers

Aerosolization is a non-invasive approach in drug delivery for localized and systemic effect. Nanostructured lipid carriers (NLCs) are new generation versatile carriers, which offer protection from degradation and enhance bioavailability of poorly water soluble drugs. The aim of this study was to develop and optimize NLC formulations in combination with optimized airflow rates (i.e. 60 and 15 L/min) and choice of medical nebulizers including Air jet, Vibrating mesh and Ultrasonic nebulizer for superior aerosolization performance, assessed via a next generation impactor (NGI). Novel composition and combination of NLC formulations (F1 - F15) were prepared via ultrasonication method, employing five solid lipids (glycerol trimyristate (GTM), glycerol trilaurate (GTL), cetyl palmitate (CP), glycerol monostearate (GMS) and stearic acid (SA)); and three liquid lipids (glyceryl tributyrate (GTB), propylene glycol dicaprylate/dicaprate (PGD) and isopropyl palmitate (IPP)) in 1:3 w/w ratios (i.e. combination of one solid and one liquid lipid), with Beclomethasone dipropionate (BDP) incorporated as the model drug. Out of fifteen BDP-NLC formulations, the physicochemical properties of formulations F7, F8 and F10 exhibited desirable stability (one week at 25 °C), with associated particle size of ~241 nm, and >91% of drug entrapment. Post aerosolization, F10 was observed to deposit notably smaller sized particles (from 198 to 136 nm, 283 to 135 nm and 239 to 157 nm for Air jet, Vibrating mesh and Ultrasonic nebulizers, respectively) in all stages (i.e. from stage 1 to 8) of the NGI, when compared to F7 and F8 formulations. Six week stability studies conducted at 4, 25 and 45 °C, demonstrated F10 formulation stability in terms of particle size, irrespective of temperature conditions. Nebulizer performance study using the NGI for F10 identified the Air jet to be the most efficient nebulizer, depositing lower concentrations of BDP in the earlier stages (1-3) and higher (circa 82 and 85%) in the lateral stages (4-8) using 60 and 15 L/min airflow rates, when compared to the Vibrating mesh and Ultrasonic nebulizers. Moreover, at both airflow rates, the Air jet nebulizer elicited a longer nebulization time of ~42 min, facilitating aerosol inhalation for prophylaxis of asthma with normal tidal breathing. Based on characterization and nebulizer performance employing both 60 and 15 L/min airflow rates, the Air jet nebulizer offered enhanced performance, exhibiting a higher fine particle dose (FPD) (90 and 69 µg), fine particle fraction (FPF) (70 and 54%), respirable fraction (RF) (92 and 69%), and lower mass median aerodynamic diameter (MMAD) (1.15 and 1.62 µm); in addition to demonstrating higher drug deposition in the lateral parts of the NGI, when compared to its counterpart nebulizers. The F10 formulation used with the Air jet nebulizer was identified as being the most suitable combination for delivery of BDP-NLC formulations.

Enhanced nuclear translocation and activation of aryl hydrocarbon receptor (AhR) in THP-1 monocytic cell line by a novel niosomal formulation of indole-3-carbinol

Although niosomes structurally resemble liposomes, they are composed of nonionic surfactants which result in less toxicity and more stability. Here, we developed a novel niosomal formulation of I3C and investigated the nuclear translocation and activation of AhR among human acute myeloid leukaemia (AML) monocytic THP-1 cell line. Niosomal vesicles comprised of nonionic surfactants, cholesterol and I3C were prepared using thin film hydration (TFH) method and characterized according to the entrapment efficiency (EE %), size and zeta potential, by Dynamic light scattering method (DLS), and the surface morphology visualized by Transmission electron microscopy (TEM). In vitro release of I3C was evaluated and MTS assay was used to evaluate the viability of THP-1 cells. The nuclear translocation of AhR was assessed by immunocytochemistry (ICC) and Real-time RT-PCR was conducted using AhR target genes. The ratio of Cholesterol:Span 60 (1:1) niosomal formulations with the highest significant EE% were selected. I3C exerted cytotoxic effects on THP-1 cells in a dose- and time-dependent manner, while administration of niosomal I3C reduced these effects. Both niosomal and free I3C formulations facilitated the nuclear translocation of AhR. CYP1A1 was overexpressed in response to both free and niosomal I3C treatments, while IL1β was overexpressed merely in niosomal I3C-treated THP-1 cells. Niosomal formulation of I3C resulted in reduced cytotoxicity effects by enhancing the functional effects of I3C on AhR in THP-1 cells, including its nuclear translocation and overexpression of the target genes.

Development of Injectable PEGylated Liposome Encapsulating Disulfiram for Colorectal Cancer Treatment

Disulfiram (DS), an anti-alcoholism medicine, shows strong anti-cancer activity in the laboratory, but the application in clinics for anti-cancer therapy has been limited by its prompt metabolism. Conventional liposomes have shown limited ability to protect DS. Therefore, the aim of this study is to develop PEGylated liposomes of DS for enhanced bio-stability and prolonged circulation. PEGylated liposomes were prepared using ethanol-based proliposome methods. Various ratios of phospholipids, namely: hydrogenated soya phosphatidylcholine (HSPC) or dipalmitoyl phosphatidylcholine (DPPC) and N-(Carbonyl-methoxypolyethylenglycol-2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE-PEG₂₀₀₀) with cholesterol were used. DS was dissolved in the alcoholic solution in different lipid mol% ratios. The size of the resulting multilamellar liposomes was reduced by high-pressure homogenization. Liposomal formulations were characterized by size analysis, zeta potential, drug loading efficiency and stability in horse serum. Small unilamellar vesicles (SUVs; nanoliposomes) were generated with a size of approximately 80 to 120 nm with a polydispersity index (PDI) in the range of 0.1 to 0.3. Zeta potential values of all vesicles were negative, and the negative surface charge intensity tended to increase by PEGylation. PEGylated liposomes had a smaller size (80–90 nm) and a significantly lower PDI. All liposomes showed similar loading efficiencies regardless of lipid type (HSPC or DPPC) or PEGylations. PEGylated liposomes provided the highest drug biostability amongst all formulations in horse serum. PEGylated DPPC liposomes had t_1/2 =77.3 ± 9.6 min compared to 9.7 ± 2.3 min for free DS. In vitro cytotoxicity on wild type and resistant colorectal cancer cell lines was evaluated by MTT assay. All liposomal formulations of DS were cytotoxic to both the wild type and resistant colorectal cancer cell lines and were able to reverse chemoresistance at low nanomolar concentrations. In conclusion, PEGylated liposomes have a greater potential to be used as an anticancer carrier for disulfiram.

Proniosomes derived niosomes: recent advancements in drug delivery and targeting

Vesicular drug delivery systems have gained wide attention in the field of nanotechnology. Among them proniosomes become the superior over other vesicular carriers. Proniosomes are dry formulations of water soluble nonionic surfactant coated carrier system which immediately forms niosomes upon hydration. They have the capability to overcome the instability problems associated with niosomes and liposomes and have the potential to improve solubility, bioavailability, and absorption of various drugs. Furthermore, they offer versatile drug delivery concept for enormous number of hydrophilic and hydrophobic drugs. They have the potential to deliver drugs effectively through different routes at specific site of action to achieve controlled release action and reduce toxic effects associated with drugs. This review discusses the general preparation techniques of proniosomes and mainly focus on the applications of proniosomes in drug delivery and targeting. Moreover, this review demonstrates critical appraisal of the literature for proniosomes. Additionally, this review extensively explains the potential of proniosomes in delivering drugs via different routes, such as oral, parenteral, dermal and transdermal, ocular, oral mucosal, vaginal, pulmonary, and intranasal. Finally, the comparison of proniosomes with niosomes manifests the clear distinction between them. Moreover, proniosomes need to be explored for proteins and peptide delivery and in the field of nutraceuticals and develop pilot plant scale up studies to investigate them in industrial set up.

Technology overview and drug delivery application of proniosome

Rapid advancement in the field of colloidal science has shown a great progress in the development of proniosome technology (PT) as an impending drug delivery system. PT is a valuable carrier system for delivery of hydrophobic as well as hydrophilic drugs. It is a liquid crystalline compact niosomal hybrid, which upon hydration gives niosomes. They can augment the bioavailability of encapsulated drug and provide better therapeutic activity in a controlled manner. Non-toxicity, penetration enhancing the effect of surfactant and modified drug release from the proniosomal transdermal gel has attracted a greater attention of formulation scientist toward PT. Free flowing dry proniosomal powder are suitable for unit dosage forms such as tablet and capsules. Proniosomes are auspicious drug delivery system for the future. Proniosomes-derived niosomes are a better alternative to the other vesicular system due to their superior physicochemical stability and effective drug delivery capability. The focus of this review is to bring out all the aspects of proniosomes including their different compositions, various methods of preparation, characterization and recent development in their therapeutic applications.