Economic comparison of enzymatic reactors and advanced oxidation processes applied to the degradation of phenol as a model compound

Removal and detoxification of pentahalogenated phenols using a photocatalytically induced enzymatic process

Poly-halogenated phenols generated from a range of industrial processes can find their way into rivers and ground water. Here we report on a potential treatment for reducing the toxicity of these aqueous pollutants using two highly toxic penta-halogenated phenols (pentachlorophenol (PCP) and pentabromophenol (PBP)) as surrogates. Solutions were passed through a glass column packed with a silica support fused with titanium dioxide (TiO2) and horseradish peroxidase (HRP) immobilized on its TiO2/glass surface (HRP-Tglass). TiO2 photocatalysis was activated through irradiation with UVB (320 nm) which in turn activated the HRP. Two operational flow rates (0.5 and 1.25 mL min-1; hydraulic retention times (HRTs) of 20 and 8 min, respectively), tested the effect of retention time on the extent of degradation and reduction in toxicity of the treated effluent. Microtox® was used to measure the toxicity of the substrate and its by-products at both flow rates. At the highest flow rate, dehalogenation was limited (removal of 37 % chlorine and 22 % bromine) and the toxicity of the reaction products increased. At the lowest flow rate, the longer exposure time resulted in approximately 97 % and 96 % transformation of PCP and PBP, respectively, a greater degree of dehalogenation (removal of 65 % chlorine and 70 % bromine) and a substantial decrease in toxicity of the treated solutions. The higher toxicity of effluent from the higher flow rate was attributed to the initial degradation products being more toxic than the substrates. With a longer HRT, these were then further broken down to less toxic products. Additional toxicity tests (Hydra hexactinella (Hydra) and Chinese Hamster Ovary (CHO) cell toxicity were conducted on the effluent from the lowest flow rate. Both were less sensitive than the Microtox test, with Hydra proving more sensitive than CHO. The novelty of this work is the toxicity risk assessment of the products resulting from the use of a spatially separated immobilized enzyme and photooxidation system. The system was robust and showed no decrease in treatment efficacy over 10 h.

Free and immobilized biocatalysts for removing micropollutants from water and wastewater: Recent progress and challenges

Enzymatic conversion of micropollutants into less-toxic derivatives is an important bioremediation strategy. This paper aims to critically review the progress in water and wastewater treatment by both free and immobilized enzymes presenting this approach as highly efficient and performed under environmentally benign and friendly conditions. The review also summarises the effects of inorganic and organic wastewater matrix constituents on enzymatic activity and degradation efficiency of micropollutants. Finally, application of enzymatic reactors facilitate continuous treatment of wastewater and obtaining of pure final effluents. Of a particular note, enzymatic treatment of micropollutants from wastewater has been mostly reported by laboratory scale studies. Thus, this review also highlights key research gaps of the existing techniques and provides future perspectives to facilitate the transfer of the lab-scale solutions to a larger scale and to improve operationability of biodegradation processes.

Process technology for multi-enzymatic reaction systems

In recent years, biocatalysis has started to provide an important green tool in synthetic organic chemistry. Currently, the idea of using multi-enzymatic systems for industrial production of chemical compounds becomes increasingly attractive. Recent examples demonstrate the potential of enzymatic synthesis and fermentation as an alternative to chemical-catalysis for the production of pharmaceuticals and fine chemicals. In particular, the use of multiple enzymes is of special interest. However, many challenges remain in the scale-up of a multi-enzymatic system. This review summarizes and discusses the technology options and strategies that are available for the development of multi-enzymatic processes. Some engineering tools, including kinetic models and operating windows, for developing and evaluating such processes are also introduced.