Periprosthetic DXA after total hip arthroplasty with short vs. ultra-short custom-made femoral stems: 37 patients followed for 3 years

Stable fixation of an ultra-short femoral neck-preserving hip prosthesis: a 5-year RSA, DXA, and clinical prospective outcome study of 48 patients

BACKGROUND AND PURPOSE

We previously showed promising primary stability and preservation of bone stock with the ultra-short neck-loading hip implant in total hip arthroplasty (THA). The aim of this study was to evaluate clinical outcome, implant stability, and bone mineral density (BMD).

METHODS

50 patients were treated with the ultra-short neck Primoris hip implant at baseline and 48 were available for evaluation at 5-year follow-up. 5 different patient-reported outcome measures (PROMs) including hip-specific scores, disease-specific and generic quality of life outcome measures, and an activity score were used. Furthermore, implant stability using radiostereometric analysis (RSA) and assessment of periprosthetic BMD using dual-energy X-ray absorptiometry (DXA) were applied.

RESULTS

By 1-year follow-up, all PROMs showed improvements and remained high at 5-year follow-up. After initial distal translation (subsidence) and negative rotation around the z-axis (varus tilt) the implant showed stable fixation at 5-year follow-up with no further migration beyond 12 months. In the regions of interest (ROI) 3 and 4, BMD remained stable. In ROI 2, further bone loss of 12% was found at 5-year follow-up.

CONCLUSION

Clinical outcome including PROMs was satisfying throughout the 5-year follow-up period. The hip implant remains stable with both bone preservation and loss 5 years after surgery.

Longitudinal Radiographic Bone Density Measurement in Revision Hip Arthroplasty and Its Correlation with Clinical Outcome

The subjective analysis of conventional radiography represents the principal method for bone diagnostics in endoprosthetics. Alternative objective quantitative methods are described but not commonly used. Therefore, semi-quantitative methods are tested using digital computation and artificial intelligence to standardize, simplify, and ultimately improve the assessment. This study aimed to evaluate the correlation between relative density progressions and clinical outcomes. Radiographs and clinical examinations before and 24 and 48 weeks after surgery were obtained from sixty-eight patients with a modular hip stem. For the calculation of the relative bone density, the modal gray values of the Gruen zones were measured using ImageJ and were normalized by gray values of the highest and lowest ROI. The clinical outcomes were measured according to the Harris hip score before evaluating them for correlations. Analyses were performed separately for subgroups and bone regions. The Harris hip score increased from 44.15 ± 15.00 pre-operatively to 66.20 ± 13.87 at the latest follow-up. The relative bone density adjustment of Gruen zone 7 showed a significant correlation to its clinical outcome. Other bone adaptations could be realistically reproduced and differences by regional zones and patients' histories visualized. Next to the simplicity and that no additional examination is required, the method provides good semi-quantitative results and visualizes adaptations, which make it suitable for use.

Could Short Stems THA Be a Good Bone-Saving Option Even in Obese Patients?

Short femoral stems, with preservation of the femoral bone stock, are commonly used in recent years for hip replacement in younger and more active patients. Obesity is increasingly spreading even in the younger population. The aim of this case-series study is to evaluate short stems compared to traditional hip prostheses in the obese population. A total of 77 consecutive patients with a BMI greater than or equal to 30 Kg/m2 were enrolled in this prospective study and were divided into two groups: 49 patients have been implanted with short stems while 28 patients were implanted with traditional stems. All the patients were treated for primary osteoarthritis or avascular necrosis and all the stems were implanted by the same surgeon using a posterior approach. Clinical (Harris Hip Score—HHS, Western Ontario and McMaster Universities Osteoarthritis Index—WOMAC, visual analogue scale—VAS, 12-item Short Form Health Survey—SF-12) and radiographic outcomes were recorded. Radiological evaluations were carried out by three different blinded surgeons. A statistical analysis was performed (chi-square, t-test, Wilcoxon Rank Sum Test, 2-factor ANOVA). At a mean follow-up of 42.6 months both groups showed a marked improvement in pain and in the clinical scores between pre- and post-surgical procedures (p < 0.05) with no significant differences between the two groups at last follow-up (p > 0.05). The radiological evaluations, with high concordance correlation between the three blinded surgeons (ICC consistently >0.80), showed good positioning and osseointegration in all cases, with no significant differences in the restoration of the joint geometry and complications. No revisions were recorded during the follow-up period. In conclusion, short stems appear to be a good option for bone preservation even in obese patients, showing comparable results to traditional implants.

Continuous periprosthetic bone loss but preserved stability for a collum femoris-preserving stem: follow-up of a prospective cohort study of 21 patients with dualenergy X-ray absorptiometry and radiostereometric analysis with minimum 8 years of follow-up

Background and purpose - We previously described a decrease in bone mineral density (BMD) in the calcar region 2 years after insertion of the collum femoris-preserving (CFP) stem, but the implants were stable. Now we have examined the long-term changes in periprosthetic BMD and stability of the CFP stem. Patients and methods - We conducted a minimum 8-year follow-up of 21 patients from our original investigation. We examined periprosthetic BMD by dual-energy X-ray absorptiometry (DEXA) and implant stability by radiostereometric analysis (RSA). Results - Between 2 and 8 years 1 stem was revised due to aseptic loosening. Between 2 and 8 years we found a 14% (95% confidence interval [CI] 9-19) reduction in BMD in Gruen zone 6 and 17% (CI 6-28) in Gruen zone 7. From baseline the reduction in BMD was 30% (CI 23-36) in Gruen zone 6, 39% (CI 31-47) in Gruen zone 7, and 19% (CI 14-23) in Gruen zone 2. Between 2 and 8 years, RSA (n = 17) showed a mean translation along the stem axis of 0.02mm (CI -0.02 to 0.06) and a mean rotation around the stem axis of 0.08° (CI -0.26 to 0.41). From baseline mean subsidence was 0.07 mm (CI -0.16 to 0.03) and mean rotation around the stem axis was 0.23° (CI -0.23 to 0.68) at 8 years. Interpretation - There was continuous loss of proximomedial BMD at 8 years while the CFP stem remained stable. Proximal periprosthetic bone loss cannot be prevented by this stem.

Preserved periprosthetic bone stock at 5 years post-operatively with uncemented short hip stem in both collared and collarless version

INTRODUCTION

Previous bone density studies have generally shown bone resorption around both cemented and uncemented total hip arthroplasty (THA) stems. This is presumed to be due to stress shielding. Short stems have been introduced partly to preserve bone in the proximal femur by a more physiological loading of the bone. The purpose of this study was to evaluate bone remodeling around a short, fully hydroxyapatite-coated titanium stem that comes in a collared and collarless version.

PATIENTS AND METHODS

A prospective cohort of 50 patients included in a study evaluating the Furlong Evolution stem has been followed for 5 years. Examination was done with dual energy X-ray absorptiometry (DXA) postoperatively, at 1, 2 and 5 years. Clinical outcome was followed with radiography and both general and hip specific outcome measures.

RESULTS

The two versions of the stem behaved similarly regarding bone remodeling. After an initial decrease up to 1 year, bone mineral density (BMD) increased in all Gruen zones up to 2 years and at 5 years bone stock was still preserved compared with postoperatively (net BMD + 1.2% (95% CI - 0.4 to 2.8)). Increase in BMD occurred mainly in the greater trochanter and distally around the stem with a decrease in the calcar area. Both versions showed excellent clinical outcome up to 5 years.

CONCLUSION

This short stem seems to preserve proximal bone stock up to 5 years, exhibiting similar behaviour both with and without a collar.

TRIAL REGISTRATION NUMBER AND DATE OF REGISTRATION

ClinicalTrials.gov, (identifier: NCT01894854). July 10, 2013.

Short-term success of proximal bone stock preservation in short hip stems: a systematic review of the literature

Total hip arthroplasty is performed more frequently in younger patients nowadays, making long-term bone stock preservation an important topic. A mechanism for late implant failure is periprosthetic bone loss, caused by stress shielding around the hip stem due to different load distribution. Short stems are designed to keep the physical loading in the proximal part of the femur to reduce stress shielding. The aim of this review is to give more insight into how short and anatomic stems behave and whether they succeed in preservation of proximal bone stock.

A systematic literature search was performed to find all published studies on bone mineral density in short and anatomic hip stems. Results on periprosthetic femoral bone mineral density, measured with dual-energy X-ray absorptiometry (DEXA), were compiled and analysed per Gruen zone in percentual change.

A total of 29 studies were included. In short stems, Gruen 1 showed bone loss of 5% after one year (n = 855) and 5% after two years (n = 266). Gruen 7 showed bone loss of 10% after one year and –11% after two years. In anatomic stems, Gruen 1 showed bone loss of 8% after one year (n = 731) and 11% after two years (n = 227). Gruen 7 showed bone loss of 14% after one year and 15% after two years.

Short stems are capable of preserving proximal bone stock and have slightly less proximal bone loss in the first years, compared to anatomic stems.

Cite this article: EFORT Open Rev 2021;6:1040-1051. DOI: 10.1302/2058-5241.6.210030

Outcomes of primary total hip arthroplasty using 3D image-based custom stems in unselected patients: a systematic review

To report clinical and radiographic outcomes of primary THA using three-dimensional (3D) image-based custom stems.

This systematic review was performed according to PRISMA guidelines and registered with PROSPERO (CRD42020216079). A search was conducted using MEDLINE, Embase and Cochrane. Clinical studies were included if they reported clinical or radiographic outcomes of primary THA using 3D image-based custom stems. Studies were excluded if specific to patients with major hip anatomical deformities, or if not written in English.

Fourteen studies were eligible for inclusion (n = 1936 hips). There was considerable heterogeneity in terms of manufacturer, proximal geometry, coating and length of custom stems. Revision rates ranged from 0% to 1% in the short-term, 0% to 20% in the mid-term, and 4% to 10% in the long-term, while complication rates ranged from 3% in the short-term, 0% to 11% in the mid-term and 0% to 4% in the long-term. Post-operative Harris hip scores ranged from 95 to 96 in the short-term, 80 to 99 in the mid-term, and 87 to 94 in the long-term. Radiographic outcomes were reported in eleven studies, although none reported 3D implant sizing or positioning, nor compared planned and postoperative hip architecture.

Primary THA using 3D image-based custom stems in unselected patients provides limited but promising clinical and radiographic outcomes. Despite excellent survival, the evidence available in the literature remains insufficient to recommend their routine use. Future studies should specify proximal geometry, length, fixation, material and coating, as well as management of femoral offset and anteversion. The authors propose a classification system to help distinguish between custom stem designs based primarily on their proximal geometry and length.

Cite this article: EFORT Open Rev 2021;6:1166-1180. DOI: 10.1302/2058-5241.6.210053

Current Applications and Selected Technical Details of Dual-Energy X-Ray Absorptiometry

The application of dual-energy X-ray absorptiometry (DXA) examinations in the assessment of bone mineral density (BMD) in the lumbar spine, hip, and forearm is the basic diagnostic method for recognition of osteoporosis. The constant development of DXA technique is due to the aging of societies and the increasing importance of osteoporosis as a public health problem. In order to assess the degree of bone demineralization in patients with hyperparathyroidism, forearm DXA examination is recommended. The vertebral fracture assessment (VFA) of the thoracic and lumbar spine, performed by a highly-skilled technician, is an interesting alternative to the X-ray examination. The DXA total body examination can be useful in the evaluation of fat redistribution among patients after bariatric surgery, in patients infected with HIV and receiving antiretroviral therapy, and in patients with metabolic diseases and suspected to have sarcopenia. The assessment of visceral adipose tissue (VAT) and detection of abdominal aortic calcifications may be useful in the prediction of cardiovascular events. The positive effect of anti-resorptive therapy may affect some parameters of DXA hip structure analysis (HSA). Long-term anti-resorptive therapy, especially with the use of bisphosphonates, may result in changes in the DXA image, which may herald atypical femur fractures (AFF). Reduction of the periprosthetic BMD in the DXA measurements can be used to estimate the likelihood of loosening the prosthesis and periprosthetic fractures. The present review aims to present current applications and selected technical details of DXA.

Mechanical Performance of Artificial Hip Stems Manufactured by Hot Forging and Selective Laser Melting Using Biocompatible Ti-15Zr-4Nb Alloy

We investigated the microstructures, tensile properties, fatigue strengths, and durability limits of hot-forged Ti-15Zr-4Nb (Ti-15-4) alloy artificial hip stems. These properties were compared with those of Ti-15Zr-4Nb-4Ta (Ti-15-4-4) and Ti-6Al-4V (Ti-6-4) alloy stems annealed after selective laser melting. The tensile and fatigue properties of test specimens cut from Ti-15-4 stems annealed after hot forging were excellent compared with those of the Alloclassic Zweymüller Stepless (SL) stem, which is used globally. The 0.2% proof stress (σ₀._2%PS), ultimate tensile strength (σ_UTS), total elongation (TE) at breaking, and fatigue strength (σ_FS) after 10⁷ cycles were 919 ± 10, 983 ± 9 MPa, 21 ± 1%, and 855 ± 14 MPa, respectively. The durability limit (P_D) after 5 × 10⁶ cycles of Ti-15-4 stems was excellent compared with that of the SL stem. The σ_UTS values of 90°- and 0°-direction-built Ti-15-4-4 rods were 1032 ± 1 and 1022 ± 2 MPa, and their TE values were 14 ± 1% and 16 ± 1%, respectively. The σ_FS values of annealed 90°-direction-built Ti-15-4-4 and Ti-6-4 rods were 640 ± 11 and 680 ± 37 MPa, respectively, which were close to that of the wrought Ti-15-4 rod (785 ± 17 MPa). These findings indicate that the hot forging and selective laser melting (SLM) techniques can also be applied to the manufacture of artificial hip prostheses. In particular, it was clarified that selective laser melting using Ti-15-4-4 and Ti-6-4 powders is useful for the low-cost manufacturing of custom-made artificial joint prostheses and other prosthetic implants.

Does radiopaque cement conceal periprosthetic bone loss around femoral stems?

BACKGROUND

Periprosthetic bone remodelling may increase fracture risk and deplete bone stock around hip implants. These changes are in part caused by implant design, advocating an early evaluation of bone remodelling properties of new implants. This can be done by repeated dual-energy x-ray absorptiometry (DXA) measurements. We know that radiopaque cement falsely elevates bone mineral density (BMD) in single measurements, however, its impact on repeated measurements, i.e. BMD changes is unexplored. We have therefore investigated whether the presence of radiopaque cement affect repeated BMD measurements.

METHODS

33 patients eligible for total hip replacement were randomly assigned to either radiopaque or radiolucent cement. BMD changes up to 12 months were measured by DXA, in addition to Harris Hip Score, plain radiographs and radiostereometric analysis (RSA).

RESULTS

Periprosthetic BMD declined during the first 3-6 months in all zones in both groups. The greatest reduction (14%) was seen in the proximal Gruen zones (1 and 7). We found a significant difference in Gruen zones 1 and 2, where the measured bone loss was higher in the radiolucent cement group.

CONCLUSIONS

The presence of radiopaque agents in bone cement may influence DXA measurements of bone remodelling.ClinicalTrials.gov identifier NCT00473421.

Precision of Bone Mineral Density Measurements Around Total Ankle Replacement Using Dual Energy X-ray Absorptiometry

INTRODUCTION

Joint prosthesis survival is associated with the quality of surrounding bone. Dual-energy X-ray absorptiometry (DXA) is capable to evaluate areal bone mineral density (BMD) around different prosthetic implants, but no studies evaluated periprosthetic bone around total ankle replacement (TAR). Our aim is to determine the precision of the DXA periprosthetic BMD around TAR.

METHODOLOGY

Short-term precision was evaluated on 15 consecutive patients. Each ankle was scanned 3 times both in the posteroanterior (PA) and lateral views with a dedicated patient positioning protocol. Up to four squared regions of interest (ROIs) were placed in the periprosthetic bone around tibial and talar implants, with an additional ROI to include the calcaneal body in the lateral scan. Coefficient of variation (CV%) and least significant change were calculated according to the International Society for Clinical Densitometry.

RESULTS

The lateral projection showed lower mean CV values compared to the PA projection, with an average precision error of 2.21% (lateral scan) compared to 3.34% (PA scans). Overall, the lowest precision error was found at both "global" ROIs (CV = 1.25% on PA and CV = 1.3% on lateral). The highest CV value on PA was found at the medial aspect of talar side (ROI 3; CV = 4.89%), while on the lateral scan the highest CV value was found on the posterior aspect of talar side (ROI 2; CV = 2.99%).

CONCLUSIONS

We found very good reproducibility BMD values of periprosthetic bone around TAR, that were comparable or even better compared to other studies that evaluated periprosthetic BMD around different prosthetic implants. DXA can be used to precisely monitor bone density around ankle prostheses, despite further long-term longitudinal studies are required to assess the clinical utility of such measurements.

Is the strain pattern of conventional stems negatively affected by a previously short stem THA? An experimental study in cadavaric bone

BACKGROUND

A short stem hip arthroplasty can be revised in many cases using a conventional stem. Furthermore, in some cases the implantation of a short stem is intended, but intraoperatively reasons may lead to the decision to implant a conventional stem after previous preparation of a short stem.

OBJECTIVE

In both cases it is questionable if the anchorage of a conventional stem is negatively affected by the previous preparation of a short stem. In clinical practice mid- or long-term follow up for these special cases hardly exist.

METHODS

The strain patterns for the conventional Bicontact stem in primary implantation and after preparation of the proximal femur for a METHA short stem were tested biomechanically in three pairs of cadaveric femora.

RESULTS

The strain patterns for the conventional Bicontact after preparation of the METHA short stem were similar to conditions after testing the conventional stem in primary conditions.

CONCLUSIONS

These data lead to the consequence that in clinical practise the implantation of a conventional stem after preparation of a short stem and even after revision of a short stem is possible without increased risk of loosening or long-term stress-shielding.

Bone remodelling and integration of two different types of short stem: a dual-energy X-ray - absorptiometry study

PURPOSE

Different kinds of bone preserving hip stems have been created to assure a more physiological distribution of the strengths on the femur. The aim of this research is to evaluate the density reaction of the periprosthetic bone while changing the conformation of the prosthetic implant on dual-energy X-ray - absorptiometry (DXA).

METHODS

This is a prospective, single-centre study assessing bone remodelling changes after implantation of two short hip stems, dividing the patients in two groups according to the implant used: 20 in group A, Metha (B-Braun), and 16 in group B, SMF (Smith and Nephew). All participants had a pre-operative and a post-operative (24 months) DXA evaluating the changes in bone mass density (BMD) occurred in the five Gruen's zones.

RESULTS

Compared to the pre-operative value, differences in BMD percentage were statistically significant only in ROI 4 (p < 0.05), with an increase in both groups (9 and 18%, respectively). The average increase in BMD was of 7.3% and 7.2% in the 2 groups.

CONCLUSION

According to our study, both stems have proved able to provide good load distribution across the metaphyseal region favouring proper system integration. Nonetheless, is certainly needed to perform other studies with longer follow-up and bigger populations to give strength to these conclusions.

An Ultra-Short Femoral Neck-Preserving Hip Prosthesis: A 2-Year Follow-up Study with Radiostereometric Analysis and Dual X-Ray Absorptiometry in a Stepwise Introduction

BACKGROUND

Total hip arthroplasty (THA) with a diaphyseal stem may risk bone loss. In order to save proximal bone stock in young patients with a high activity level and a long life expectancy, the interest in short stems has evolved. The purpose of this prospective observational cohort study was to evaluate the fixation of, and bone remodeling around, the Primoris femoral neck-preserving hip implant.

METHODS

Fifty younger patients with end-stage osteoarthritis were managed with the Primoris hip implant. We evaluated bone mineral density (BMD) using dual x-ray absorptiometry (DXA) and implant migration using radiostereometric analysis (RSA). A region-of-interest (ROI) protocol for 4 ROIs was applied to assess BMD. The association between BMD and migration was evaluated to determine the fixation of the Primoris implant and bone remodeling in the proximal part of the femur. Follow-up evaluation was performed at regular intervals from day 1 (baseline) until 24 months after surgery.

RESULTS

The major stem migrations were subsidence (Y axis; mean, 0.38 mm) at 6 weeks and varus tilt (rotation) (Z axis; mean, 0.93°) at 6 to 12 months. In ROI4 (the calcar area), a significant gain in bone was found with a mean difference of 4.1% (95% confidence interval [CI], 0.8% to 7.4%; p < 0.02) at 24 months postoperatively. Significant bone loss was found in ROI1 and ROI2, with a mean difference of -4.9% (95% CI, -7.4% to -2.4%; p = 0.0003) and -8.9% (95% CI, -11.5% to -6.2%; p = 0.0001), respectively. Linear regression and multivariate regression analysis showed a significant negative association between maximal total point motion and BMD (p = 0.02, R = 15%; and p < 0.05, R = 26%, respectively).

CONCLUSIONS

The Primoris component showed satisfactory primary stability with promising results at the 24-month follow-up. DXA scans showed limited stress-shielding with the proximal loading pattern of the Primoris. Better bone quality was associated with less implant migration.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Age-related osseointegration of a short hip stem: a clinical and radiological 24 months follow-up

PURPOSE

The purpose of this study was to examine potential differences between patients under and over 60 years who underwent a total short hip stem arthroplasty in a 24-month follow-up in a clinical setting.

METHODS

Sixty seven patients were included in this prospective study and divided in two groups. In the younger cohort 39 patients ≤ 59 years and in the older cohort 28 patients ≥ 60 years were included. Clinical and radiological examinations of the patients took place preoperatively, postoperatively and after 3, 6, 12 and 24 months. The Harris Hip Score (HHS) was raised as clinical examination. Changes of bone mass density (BMD), stress shielding, reactive lines, spot welds and sclerosing were examined as radiological analysis.

RESULTS

The HHS improved from 53.6 ± 8.2 preoperative to 93.2 ± 9.6 in the younger cohort and for the older cohort from 57.6 ± 14.8 to 94.1 ± 7.6 after 24 months. BMD growth was detectable in regions of interest (ROI) 3 and 6 for both groups. Different results between the cohorts could only be detected in ROIs 4 and 5. The older cohort showed a loss of BMD of 5.95% in ROI 4 and 3.17% in ROI 5 after 24 months, whereas the younger cohort showed no loss of BMD in both ROIs.

CONCLUSIONS

No significant differences or any influences of osseointegration and clinical outcome of the short hip stem for both groups were detectable. Lower losses (ROIs 1 and 2) and higher growths (ROIs 3, 4, 5) were discovered in younger patients and the HHS improved in both groups. Reasons for this result could be age, sex or the level of activity of the patients, but in both groups the short hip stem shows comparable results in clinical as well as in radiological examination. We conclude that the short hip stem seems to be an adequate treatment also for older patients.

Relative radiographic bone density measurement in revision hip arthroplasty and its correlation with qualitative subjective assessment by experienced surgeons

BACKGROUND

Conventional radiography (CR) is the imaging method of choice in monitoring bone remodelling and other stability parameters after total hip arthroplasty (THA). Quantitative roentgen- or computed-tomography-based methods to determine bone density are prone to metal artifacts and often very costly, which is why they are not used as standard in a clinical setting. Since subjective assessment of bone remodelling in CR also has a certain susceptibility to errors, semi-quantitative methods have been developed to help approximate periprosthetic bone density development via CR to open up an additional tool for documentation of radiographic THA follow-up.

OBJECTIVE

Proof-of-principle of a newly designed imaging-software-aided method to measure relative bone density around the femoral stem in a series of conventional radiographs following THA.

METHODS

Eighty-six patients with hip modular tapered, fluted titanium stems were selected from the clinical database and series of baseline and postoperative follow-up radiographs were obtained after 24 and 48 weeks. Relative bone densities were measured per Gruen zones G1-7 with the use of an open-source image analysis package (ImageJ) by means of greyscale histograms. In addition, subjective evaluation of selected cases was performed by three independent, blinded orthopedic surgeons. Besides descriptive and nonparametric analyses, intra-class correlation (ICC) was performed and objective and subjective results were compared by linear regression analysis.

RESULTS

Two individual cases are presented as a proof-of-principle. Increase or decrease of bone density could be measured correctly over time in each case. In a collective analysis there were no significant differences in mean relative bone densities between groups after 24 and 48 weeks, although a positive tendency was visible towards increased bone formation over time. Individual analyses by Gruen zones revealed that some zones, namely the proximal ones (e.g. G6), exhibit a broader scattering than others over time. This could be explained by the design of the evaluated tapered revision stem that achieves distal fixation and allows for proximal micromotion. Correlation analysis with subjective ratings (inter-rater reliability ICC = 0.71) showed a positive correlation with objective results, suggesting a feasibility of the method for clinical use.

CONCLUSIONS

In conclusion the presented method is an easy and accessible tool to quantify relative bone density changes during THA follow-up. It shows a positive correlation to established subjective assessment of bone remodelling and may therefore serve as a quantitative supplement in clinical documentation.

Bone remodelling of the proximal femur after total hip arthroplasty with 2 different hip implant designs: 15 years follow-up of the thrust plate prosthesis and the Bi-Metric stem

INTRODUCTION

The thrust plate prosthesis (TPP) was introduced to preserve bone in patients undergoing total hip arthroplasty. We assessed the long-term results of hip arthroplasty in patients who received the TPP compared to a traditional intramedullary stem (Bi-Metric).

METHODS

In this prospective observational cohort study, we evaluated bone mineral density (BMD) using dual-energy X-ray absorptiometry (DXA), radiological imaging and clinical outcome using Harris Hip Score (HHS). Twenty patients received the TPP (group A) and 18 patients received the Bi-Metric stem (group B). Baseline was the 1st postoperative day, and subsequent follow-up was performed at 6 months, 1, 2, 8, 12 and 15 years after surgery. A four regions of interest (ROI) protocol was developed to assess BMD.

RESULTS

In ROI1, bone resorption was significantly higher for group A at 6 months with a mean difference of 10% (95% confidence interval [CI], 4-16; p = 0.003) and 8% (95% CI, 1-15; p = 0.03) at 8 years. Regarding ROI4, group A had a lesser decrease in general compared to group B. The radiological findings did not reveal any subsidence or detectable implant migration. HHS improved from 53 (23-69) to 93 (55-100) in group A and from 51 (24-72) to 94 (78-100) in group B.

CONCLUSION

The TPP was not found to be inferior to the Bi-Metric stem regarding bone preservation. The decrease in BMD in ROI4 was greater in group B. Clinical and radiological results also revealed that the TPP was not inferior to the Bi-Metric stem.

Are short-stem prostheses superior to conventional stem prostheses in primary total hip arthroplasty? A systematic review and meta-analysis of randomised controlled trials

OBJECTIVE

Cementless total hip arthroplasty (THA) is associated with reliable clinical results and high patient satisfaction. Short-stem prostheses (SS) were designed to achieve superior preservation of proximal bone stock and stability compared with those of conventional-stem prostheses (CS). This meta-analysis was conducted to determine the proximal bone remodelling, revision rate, Harris Hip Score, radiolucent line and maximum total point motion values of both SS and CS for primary THA.

METHOD

Relevant randomised controlled trials (RCTs) involving SS and CS in primary THA were identified from electronic databases, such as EMBASE, PubMed and the Cochrane Library.

RESULT

Ultimately, 12 RCTs involving 1130 patients (1387 hips) were included. The results showed that compared with CS, SS resulted in less bone mineral density (BMD) changes in Gruen zone 7 at 1 year and 2 years postoperatively (mean difference (MD)=5.11; 95% CI, 1.61, 8.61; P=0.30; and MD=4.90; 95% CI, 1.01, 8.79; P=0.17, respectively). No difference in BMD changes was found for Gruen zone 1 (MD=2.66; 95% CI, -3.31, 8.64; P<0.00001), and no differences were observed for the revision rate (relative risk (RR)=1.52; 95% CI, 0.71, 3.26; P=0.94), Harris Hip Score (MD=-0.38; 95% CI, -1.02, 0.26; P=0.89) or stem migration (MD=0.02; 95% CI, -0.07, 0.11; P=0.04).

CONCLUSION

Our results suggest that compared with CS, SS may provide superior bone remodelling and similar survival rates and clinical outcomes. However, the short-term follow-up of the included studies was inadequate to determine the long-term performance of SS.

Comparison of periprosthetic bone remodeling after implantation of anatomic and tapered cementless femoral stems in total hip arthroplasty: A prospective cohort study protocol

INTRODUCTION

Current total hip arthroplasty (THA) implant usage trends favor cementless fixation, and plenty studies have demonstrated that numbers of cementless femoral stems are associated with excellent long-term survivorship and functional outcomes. Various types of cementless femoral stems have been developed and utilized in multiple applications, including straight, tapered, anatomic, customized, short, and even neck stems. All of these designs aimed to achieve maximal primary stability and promote osseointegration. Nevertheless, stress-shielding and periprosthetic bone loss continue to occur and remain critical issues in promoting long-term survivorship of THA. Considering anatomic and tapered stems are the most popular cementless designs today, this prospective cohort study aimed to investigate the effect of stem design on stress-shielding and periprosthetic bone remodeling after implantation of an anatomic stem with proximal fixation (Ribbed Hip system; Waldemar Link, Hamburg, Germany) and the direct comparison to a fully coated tapered stem (LCU Hip system; Waldemar Link).

MATERIALS AND METHODS

This prospective cohort study will comprise patients who receive primary unilateral THA with the Ribbed anatomic hydroxyapatite (HA)-coated stem or LCU tapered fully HA-coated stem. The changes in periprosthetic bone mineral density after insertion of Ribbed and LCU stem prostheses will be assessed by means of dual-energy X-ray absorptiometry in the periprosthetic region of interest according to Gruen and colleagues. Standard anteroposterior and lateral plain radiography will be performed for qualitative assessment of the periprosthetic bone remodeling. The following items will be analyzed or measured on follow-up radiographs to compare with the initial appearance on the radiographs taken immediately postoperatively: cortical thickness in each Gruen zone, fitness of the distal stem within the isthmus, femoral stem alignment, radiolucent line, reactive line, periosteal bone reactions, and subsidence. Biologic fixation and stability of the cementless implant will be evaluated using Engh grading scale, and heterotopic ossification will be graded according to Brooker classification. Furthermore, Harris hip score and Western Ontario and McMaster Universities Osteoarthritis Index Score will also be assessed for postoperative functional evaluation. These radiologic and clinical assessments will be taken postoperatively, at 6 months, 1, 2, 3, 4, and 5 years after surgery.

ETHICS AND DISSEMINATION

This study was approved by The First Affiliated Hospital of Chongqing Medical University Ethics Committee. The study results will be disseminated at national and international conferences and published in peer-reviewed journals.

STUDY REGISTRATION

Chinese Clinical Trial Registry (http://www.chictr.org.cn): ChiCTR1800017841.

Long-term follow-up of 1217 consecutive short-stem total hip arthroplasty (THA): a retrospective single-center experience

BACKGROUND

An arthroplasty registry in Germany has been recently established but long-term results for most short-stem innovations are missing. Short-stem hip arthroplasty is usually indicated in young active patients. Our indication was extended to older age groups, femoral neck fractures (FNF), and dysplasia. We evaluated all total hip arthroplasties (THAs) in this population with a collum femoris preserving stem (CFP) performed from 2003 to 2013.

METHODS

A consecutive cohort of 1217 CFP THAs with a mean age of 68.7 years was followed retrospectively for a median of 4.8 years (patient follow-up interquartile range from 3.0 to 6.9 years). A questionnaire, which we used in two previous studies, was answered by 89.15% of patients and included information regarding complaints, grade of satisfaction, re-operations, and dislocation. Of the 1217 patients, 77 had died. Survival of the stem and the cup was assessed using a competing risks approach according to an Aalen-Johanson estimator with revision for septic or aseptic loosening or death as a competing endpoint.

RESULTS

Of the patients who answered the questionnaire, 92.5% had no complaints related to the procedures. In all 1217 patients, there were 43 revisions (4.2%) as follows: stem and cup revisions due to aseptic loosening of the stem (n = 10), infections (n = 6), pain (n = 4), or trauma (n = 3); cup revisions due to aseptic loosening (n = 3), dislocation (n = 5), and offset revisions (n = 12). Survivorship was 96% for the stem and 99% for the cup 9 years postoperatively. Statistical analysis confirmed a higher risk for revision in patients with a younger age (p = 0.033), male sex (p = 0.040), dysplasia (p = 0.032), and undersized or extra-large stems for stem revisions (p = 0.001) and female sex (p = 0.036) for cup revisions. FNF (p > 0.20) and age ≥ 80 years (p = 0.114) had no higher risk for loosening of the stem. Our data is also compared with the current literature, especially with the available CFP studies.

CONCLUSION

The survival rate of the CFP stem was as high as 96% after 9 years of followup which compares well-to-previously published long-term survival rates. There is no higher risk for revision in patients 80 years old or older and in cases with femoral neck fractures. The CFP preserves also allowed using standard stems in the rare cases of revision.

Quantitating the effect of prosthesis design on femoral remodeling using high-resolution region-free densitometric analysis (DXA-RFA)

Dual energy X-ray absorptiometry (DXA) is the reference standard method used to study bone mineral density (BMD) after total hip arthroplasty (THA). However, the subtle, spatially complex changes in bone mass due to strain-adaptive bone remodeling relevant to different prosthesis designs are not readily resolved using conventional DXA analysis. DXA region free analysis (DXA RFA) is a novel computational image analysis technique that provides a high-resolution quantitation of periprosthetic BMD. Here, we applied the technique to quantitate the magnitude and areal size of periprosthetic BMD changes using scans acquired during two previous randomized clinical trials (2004 to 2009); one comparing three cemented prosthesis design geometries, and the other comparing a hip resurfacing versus a conventional cementless prosthesis. DXA RFA resolved subtle differences in magnitude and area of bone remodeling between prosthesis designs not previously identified in conventional DXA analyses. A mean bone loss of 10.3%, 12.1%, and 11.1% occurred for the three cemented prostheses within a bone area fraction of 14.8%, 14.4%, and 6.2%, mostly within the lesser trochanter (p < 0.001). For the cementless prosthesis, a diffuse pattern of bone loss (-14.3%) was observed at the shaft of femur in a small area fraction of 0.6% versus no significant bone loss for the hip resurfacing prosthesis (p < 0.001). BMD increases were observed consistently at the greater trochanter for all prostheses except the hip-resurfacing prosthesis, where BMD increase was widespread across the metaphysis (p < 0.001). DXA RFA provides high-resolution insights into the effect of prosthesis design on the local strain environment in bone. © 2017 The Authors Journal of Orthopaedic Research published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 35:2203-2210, 2017.

Efficacy of Alendronate for the Prevention of Bone Loss in Calcar Region Following Total Hip Arthroplasty

BACKGROUND

Bone mineral density (BMD) loss around femoral implants, particularly in the proximal femur, is a common outcome after total hip arthroplasty. Previous studies reported the prevention of postsurgical decrease in BMD with the use of osteoporosis drug therapy. This randomized study evaluated the efficacy of alendronate and alfacalcidol for preserving BMD over a long-term follow-up.

METHODS

Sixty consecutive patients with hip osteoarthritis who had undergone primary cementless total hip arthroplasty were randomly assigned to an alendronate (n = 20), alfacalcidol (n = 18), or control (n = 22) group. Periprosthetic BMD was measured using dual-energy X-ray absorptiometry at 1 week, 1 year, and the current follow-up (minimum 9 years after surgery). Changes in BMD are reported as mean percentages relative to the values at 1 week (baseline reference).

RESULTS

All groups showed a significant decrease in the BMD of the calcar at the current follow-up compared to the values at both 1 week and 1 year postoperatively (P < .001). The BMD values were significantly higher in the alendronate group than in the alfacalcidol and control groups (P < .05). The BMD values at the current follow-up were 76% ± 30% (alendronate group), 64% ± 22% (alfacalcidol group), and 59% ± 22% (control group) of the baseline values.

CONCLUSION

Our findings demonstrate the efficacy of early administration of alendronate for the prevention of bone loss in the calcar region.

No Difference in Periprosthetic Bone Loss and Fixation Between a Standard-Length Stem and a Shorter Version in Cementless Total Hip Arthroplasty. A Randomized Controlled Trial

BACKGROUND

Cementless femoral stems in total hip arthroplasty provide dependable clinical and radiographic results in the treatment of osteoarthritis. Stem length might affect the preservation of proximal bone stock and stability. We hypothesized that a shorter stem decreases proximal bone loss without affecting implant stability.

METHODS

We randomly assigned 60 patients aged between 50 and 70 years to either a standard cementless femoral stem or a 35-mm shorter version. Patients were followed with dual-energy X-ray absorptiometry, radiostereometric analysis, Harris hip score, Western Ontario and McMaster Universities Osteoarthritis Index score, and clinical follow-up at 3, 6, 12, and 24 months. The trial is registered on ClinicalTrials.gov/.

RESULTS

After 24 months, short stems had on average 3.8% (95% confidence interval, 1.2%-8.9%) more bone loss in zone 1 compared to standard stems (P = .14). In zone 7, the bone loss was on average 6.5% (95% confidence interval, 6.6%-19.7%) higher compared to standard stems (P = .33). After 24 months, standard stems had migrated 0.93 mm (range, 0.25-4.66 mm) and short stems 0.93 mm (range, 0.17-2.96 mm; Student t-test after log transformation, P = .3). Patient-reported outcome measures were similar in both groups. One patient in the standard stem group was diagnosed with infection, one with a posterior dislocation, and one with a deep venous thrombosis. No stems were revised.

CONCLUSION

There were no statistically significant differences in periprosthetic bone loss or fixation between the stems at 24 months.

Increase in physical activity after resurfacing hip arthroplasty is associated with calcar and acetabular bone mineral density changes

PURPOSE

Bone preservation is an important advantage of the resurfacing hip arthroplasty (RHA) concept. We hypothesised that patients' increase in physical activity level after RHA would positively relate with periprosthetic bone mineral density (BMD) changes and thus facilitate bone preservation.

METHODS

BMD-changes were prospectively recorded in 38 patients after RHA. Dual-energy absorptiometry was used to quantify BMD-changes in 6 periprosthetic regions of interest preoperatively, at 6 months, 1, 2 and 3 years postoperative. The effect estimates of patients' physical activity, according to their Harris Hip Score (HHS) and University of California at Los Angeles (UCLA) Activity Score, on these BMD changes were assessed in linear mixed models.

RESULTS

The UCLA (coefficient = 0.02 (95% CI, 0.010-0.034); p<0.001) and HHS (coefficient = 0.002 (95% CI, 0.001-0.003); p<0.001) were associated with the BMD in the calcar region. As for BMD changes in the femoral neck only the HHS was associated (coefficient = 0.0006 (95% CI, <0.0001-0.001); p = 0.04). Both the UCLA and the HHS were inversely associated with BMD in the medial acetabular region (UCLA: coefficient = -0.02 (95% CI, -0.038 to -0.007); p = 0.005, HHS: coefficient = -0.002 (95% CI, -0.003 to -0.001), the same accounted for the HHS to BMD-change cranial to the acetabulum (-0.001 [95% CI, -0.0018 to -0.0001]; p = 0.03). For the caudal acetabular and femoral subtrochanteric region no relation with BMD-changes was found.

CONCLUSIONS

The increase in activity scores after RHA was indeed associated with an increase in BMD in the calcar region, however unexpectedly also with a BMD decrease on the acetabular side. Stress shielding from the implant is the most likely causative factor.

Finite element analysis of cementless femoral stems based on mid- and long-term radiological evaluation

BACKGROUND

Femoral bone remodeling in response to stress shielding induces periprosthetic bone loss. Computerized finite element analysis (FEA) is employed to demonstrate differences in initial stress distribution. However, FEA is often performed without considering the precise sites at which the stem was fixed. We determined whether FEA reflects mid-term radiological examination exactly as predicted following long-term stress shielding.

METHODS

Femur-stem fixation sites were evaluated radiologically according to the location of spot welds in two anatomical cementless stem designs. Based on mid-term radiological results, four femur-stem bonding site conditions were defined as: (Condition A) no bonding; (Condition B) bonding within the 10 mm area proximal to the distal border of the porous area; (Condition C) bonding of the entire porous area; and (Condition D) bonding of the entire femoral stem, prior to conducting FEA analysis. Furthermore, we radiographically evaluated mid- and long-term stress shielding, and measured bone mineral density of the femur 10 years after total hip arthroplasty.

RESULTS

Spot welds appeared frequently around the border between the porous and smooth areas. FEA showed that, based on mid-term radiological evaluation, von Mises stress was reduced in condition B in the area proximal to the femur-stem bonding sites for both stem designs compared with condition A (no bonding). Conversely, von Mises stress at all areas of the femur-stem bonding sites in conditions C and D was higher than that in condition A. With respect to stress shielding progression, there was no significant difference between the two types of stem designs. However, stress shielding progressed and was significantly higher in the presence of spot welds (p = 0.001). In both stem designs, bone mineral density in zone VII was significantly lower than that in the contralateral hips.

CONCLUSIONS

These results indicate that FEA based on mid-term radiological evaluation may be helpful to predict the influence of long-term stress shielding more precisely.

Favorable Results of a Short, Tapered, Highly Porous, Proximally Coated Cementless Femoral Stem at a Minimum 4-Year Follow-Up

BACKGROUND

Shorter femoral stems have been increasingly used in total hip arthroplasty. However, there are few clinical studies evaluating the outcomes of these stems and comparing them to their regular-sized counterparts.

METHODS

Our study provides radiologic and functional outcomes at 5-year mean follow-up of 131 cementless Tri-Lock Bone Preservation Stems, a short tapered stem with a proximal porous coating.

RESULTS

Stem-related complications were low with one revision for stem aseptic loosening. Kaplan-Meier analysis estimated 99.2% stem survival rate at 5 years, comparable to conventional length Tri-Lock stems (99.8% at 8.9 years).

CONCLUSION

This study demonstrates that the Tri-Lock Bone Preservation Stem can provide successful outcomes at 5-year follow-up. Further studies are required to determine the long-term outcome of these implants in patients with poor bone stock.

Difference in periprosthetic acetabular bone mineral density: Prior total hip arthroplasty: Osteonecrosis of the femoral head versus primary osteoarthritis

BACKGROUND

Total hip arthroplasty (THA) could be associated with a higher failure rate in patients after osteonecrosis of the femoral head (ONFH) compared to a patient population with primary osteoarthritis prior THA, especially regarding the acetabular component. One major reason could be the compromised acetabular bone quality. Therefore, we performed a retrospective case matched study to assess: 1) Is there a difference in periprosthetic bone mineral density between patients with an ONFH prior THA and controls? 2) Do patients with an ONFH prior THA have a lower bone mineral density compared to controls? 3) Which region in the periprosthetic bone stock is more likely to present differences in periprosthetic bone mineral density between both groups?

HYPOTHESIS

We hypothesized that there is a poorer bone mineral density (BMD) in the periacetabular bone stock in patients with an ONFH prior THA compared to controls receiving a THA due to primary osteoarthritis.

PATIENTS AND METHODS

We compared the BMD of 50 patients with ONFH to 50 controls with primary osteoarthritis prior THA using the same implant in mean 5 years after surgery by means of dual energy X-ray absorptiometry (DXA). We analysed 3 acetabular ROIs according to DeLee and Charnley in a modified measurement technique.

RESULTS

In ROI 3, representing acetabulum's upper aspect, statistically significant lower BMD values for the ONFH group could be found (P < 0.05). No difference was found for the modified ROIs 1 and 2 (respectively medial and lower acetabulum).

DISCUSSION

The results indicate a poorer periacetabular BMD in patients with ONFH prior THA, which might be responsible for premature loosening of the acetabular cup in THA. Due to a lack of literature, further clinical investigations are required to confirm our results.

LEVEL OF EVIDENCE

III: retrospective case-control study.

Lower periprosthetic bone loss and good fixation of an ultra-short stem compared to a conventional stem in uncemented total hip arthroplasty

BACKGROUND AND PURPOSE

We hypothesized that an ultra-short stem would load the proximal femur in a more physiological way and could therefore reduce the adaptive periprosthetic bone loss known as stress shielding.

PATIENTS AND METHODS

51 patients with primary hip osteoarthritis were randomized to total hip arthroplasty (THA) with either an ultra-short stem or a conventional tapered stem. The primary endpoint was change in periprosthetic bone mineral density (BMD), measured with dual-energy x-ray absorptiometry (DXA), in Gruen zones 1 and 7, two years after surgery. Secondary endpoints were change in periprosthetic BMD in the entire periprosthetic region, i.e. Gruen zones 1 through 7, stem migration measured with radiostereometric analysis (RSA), and function measured with self-administered functional scores.

RESULTS

The periprosthetic decrease in BMD was statistically significantly lower with the ultra-short stem. In Gruen zone 1, the mean difference was 18% (95% CI: -27% to -10%). In zone 7, the difference was 5% (CI: -12% to -3%) and for Gruen zones 1-7 the difference was also 5% (CI: -9% to -2%). During the first 6 weeks postoperatively, the ultra-short stems migrated 0.77 mm more on average than the conventional stems. 3 months after surgery, no further migration was seen. The functional scores improved during the study and were similar in the 2 groups.

INTERPRETATION

Up to 2 years after total hip arthroplasty, compared to the conventional tapered stem the ultra-short uncemented anatomical stem induced lower periprosthetic bone loss and had equally excellent stem fixation and clinical outcome.

Densitometric evaluation of bone remodelling around Trabecular Metal Primary stem: a 24-month follow-up

BACKGROUND

Today, an increasing number of total hip arthroplasty (THA) procedures are being performed. Osseointegration is a physiological phenomenon that leads to the direct anchorage of an implant by the formation of bony tissue around the implant without the growth of fibrous tissue at the bone-implant interface. Several factors may affect this phenomenon: some of these depend on the patient and others may depend on implant design and materials. Variations in periprosthetic bone mineral density (BMD) can be studied through several scans by dual energy X-ray absorptiometry (DEXA) around the femoral stem.

AIMS

The purpose of this study is to investigate correlations between periprosthetic BMD and the factors affecting osseointegration.

METHODS

We retrospectively analysed patients who underwent primary THA. In all the patients, Trabecular Metal Primary (TMP), a standard uncemented tapered stem with a proximal porous tantalum coating, was implanted. Preoperatively, postoperatively, 3 and 6 months, 1 year and 2 years after implantation, DEXA scans were performed around the femoral stem. The patients were matched for diagnosis, sex, BMD of the lumbar spine and contralateral femur, Body Mass Index and age.

RESULTS

One hundred and eight patients (51 males and 57 females) with a mean age of 73 years were studied. Different BMD changing patterns were observed and a greater bone resorption was noted in all the conditions associated with poor bone quality.

DISCUSSION

The proximal coating of Trabecular Metal Primary (TMP) seemed to be effective in promoting new bone formation in the proximal femur also in the conditions associated with poor bone quality.

CONCLUSIONS

At the present time, DEXA is considered the most reliable tool for evaluating bone remodelling after THA.

Use of high resolution dual-energy x-ray absorptiometry-region free analysis (DXA-RFA) to detect local periprosthetic bone remodeling events

Dual-energy x-ray absorptiometry (DXA) is the gold standard method for measuring periprosthetic bone remodeling, but relies on a region of interest (ROI) analysis approach. While this addresses issues of anatomic variability, it is insensitive to bone remodeling events at the sub-ROI level. We have validated a high-spatial resolution tool, termed DXA-region free analysis (DXA-RFA) that uses advanced image processing approaches to allow quantitation of bone mineral density (BMD) at the individual pixel (data-point) level. Here we compared the resolution of bone remodeling measurements made around a stemless femoral prosthesis in 18 subjects over 24 months using ROI-based analysis versus that made using DXA-RFA. Using the ROI approach the regional pattern of BMD change varied by region, with greatest loss in ROI5 (20%, p < 0.001), and largest gain in ROI4 (6%, p < 0.05). Analysis using DXA-RFA showed a focal zone of increased BMD localized to the prosthesis-bone interface (30-40%, p < 0.001) that was not resolved using conventional DXA analysis. The 20% bone loss observed in ROI5 with conventional DXA was resolved to a focal area adjacent to the cut surface of the infero-medial femoral neck (up to 40%, p < 0.0001). DXA-RFA enables high resolution analysis of DXA datasets without the limitations incurred using ROI-based approaches.

Periprosthetic bone remodeling around short stem

Total hip arthroplasty (THA) has become standard treatment for advanced degenerative changes of the hip. A few studies have reported promising clinical outcomes with the Metha stem fixated by metaphyseal anchoring. This study evaluated early bone remodeling around the Metha stem during 12 months of follow-up. The study population included 36 patients (18 women and 18 men) with a mean age of 50.4 years who underwent THA between 2009 and 2011 for advanced degenerative changes of the hip with the Metha stem. Patients were evaluated on the day of surgery, 10 days postoperatively, and then at 3, 6, and 12 months postoperatively. Evaluation included Harris Hip Score and dual-energy x-ray absorptiometry (DEXA) scanning in 7 Gruen zones. At 12 months postoperatively, Harris Hip Score increased significantly by 38 points. A significant change in bone mineral density (BMD) was found immediately after surgery; this change was most pronounced in Gruen zone 3 (+36%), followed by Gruen zones 2 and 5. The smallest postoperative BMD increase was observed in Gruen zone 7 (+3.66%). In contrast, at 3 months postoperatively, a trend toward decreased BMD was observed in all Gruen zones. At 6 months postoperatively, mean BMD decreased in all Gruen zones except for Gruen zone 6. At 12 months postoperatively, mean BMD increased in Gruen zones 2 through 6, with the highest value (30%) observed in Gruen zone 3; in Gruen zones 1 and 2, mean BMD decreased. Short-term assessment of periprosthetic bone remodeling after uncemented Metha stem implantation revealed different host-bone responses. Apparently, the Metha stem can reduce BMD loss in the proximal femur. DEXA is a precise method for assessing BMD changes around implanted Metha stem.

Changes in bone mineral density and femoral neck narrowing in the proximal femur three to five years after hip resurfacing versus conventional total hip arthroplasty

We studied whether bone mineral density (BMD) is preserved without significant femoral neck narrowing (FNN) after hip resurfacing (RHA) (n=42) versus small diameter metal-on-metal total hip arthroplasty (MoM THA) (n=40). In this three to five year randomized trial BMD was measured in the calcar with dual energy absorptiometry (DXA) preoperatively, at three and six months, one, two, three and five years postoperatively. Four additional BMD regions of interest (ROIs) and femoral neck narrowing (FNN) were measured after RHA. BMD in the calcar increased to 107% (P<0.001) at one year and remained stable. Additional ROIs in the femoral neck and trochanter-area BMD changes fluctuated between 99.9% and 104.1%. FNN was minimal with a mean of 1.3% at three years. After THA BMD decreased in the calcar to 80% at one year (P<0.001) and stabilized. This bone stock preserving nature of RHA must be weighed against potential disadvantages caused by specific metal-on-metal bearing problems.

Periprosthetic bone loss: diagnostic and therapeutic approaches

Total joint replacement surgery is being performed on an increasingly large part of the population. Clinical longevity of implants depends on their osseointegration, which is influenced by the load, the characteristics of the implant and the bone-implant interface, as well as by the quality and quantity of the surrounding bone. Aseptic loosening due to periprosthetic osteolysis is the most frequent known cause of implant failure. Wear of prosthetic materials results in the formation of numerous particles of debris that cause a complex biological response. Dual-energy X-ray Absorptiometry (DXA) is regarded as an accurate method to evaluate Bone Mineral Density (BMD) around hip or knee prostheses. Further data may be provided by a new device, the Bone Microarchitecture Analysis (BMA), which combines bone microarchitecture quantification and ultra high resolution osteo-articular imaging. Pharmacological strategies have been developed to prevent bone mass loss and to extend implant survival. Numerous trials with bisphosphonates show a protective effect on periprosthetic bone mass, up to 72 months after arthroplasty. Strontium ranelate has been demonstrated to increase the osseointegration of titanium implants in treated animals with improvement of bone microarchitecture and bone biomaterial properties.

WITHDRAWN: Periprosthetic Bone Mineral Density After Total Hip Arthroplasty With an AMIStem or Quadra Femoral Component Performed by a Minimally Invasive Anterior Approach (AMIS): A Prospective Randomized Clinical Dual-Energy X-ray Absorptiometry Study

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Clinical comparison of THA with a standard-length or short femoral component

The purposes of this 2-part study were to determine whether reduced distal femoral component geometry allows for routinely larger component sizes to be used and whether clinical or radiographic outcomes differ between total hip arthroplasty (THA) patients treated with either standard-length or short femoral components. Femoral component size and ongrowth surface area were retrospectively compared in a group of bilateral THA patients that had both a standard-length component and a contralateral short component. Then, clinical and radiographic outcomes were compared between matched groups of THA patients that had either a standard-length or short femoral component. The use of the short component resulted in a significantly larger femoral component size being used (P=.01), and the potential ongrowth surface area was significantly larger for the short component than for the standard component (median, 36.69 vs 35.55 cm2; P=.02). In the matched-pairs analysis, no group differences were noted in modified Harris Hip Scores (P=.43) or femoral component subsidence (P=.35), but there was a significantly greater prevalence of radiolucent lines in Gruen zone 8 with the short component (P=.008). The use of a short femoral component was associated with consistently larger component sizes being used, which corresponded with a larger potential ongrowth surface area. Short-term clinical and radiographic outcomes did not differ between standard-length and short femoral components. Studies are necessary to determine whether the increased proximal ongrowth surface area may result in improved long-term fixation or, on the contrary, may increase the risk of periprosthetic fracture.

Comparison of mechanical stress and change in bone mineral density between two types of femoral implant using finite element analysis

Stress shielding after total hip arthroplasty (THA) remains an unsolved issue. Various patterns of mechanical stress appear according to the type of femoral stem used. To compare differences in mechanical stress conditions between Zweymuller type and fit-and-fill type stems, finite element analysis (FEA) was performed. Differences in bone mineral density (BMD) changes in the femur were also compared. Maximum stress was confirmed in Gruen zone 4, whereas zone 1 had the minimum amount of stress with both types of implant. The Zweymuller stem group had less mechanical stress and lower BMD in zone 7 than the fit-and-fill stem group. In conclusion, differences in mechanical stress may be related to changes in BMD after THA.

Periacetabular bone mineral density changes after resurfacing hip arthroplasty versus conventional total hip arthroplasty. A randomized controlled DEXA study

A randomized controlled trial was performed to evaluate acetabular bone mineral density (BMD) changes after hip resurfacing (RHA) versus an established conventional total hip arthroplasty (THA). A total of 71 patients were allocated randomly to receive either an RHA press-fit cobalt-chromium cup (n=38) or a THA with a threaded titanium cup and polyethylene-metal-inlay insert (n=33). The BMD in five separate periacetabular regions of interest (ROI) was prospectively quantified preoperative until 24 months. We conclude that, in contrast to our hypothesis, periacetabular BMD was better preserved after RHA than after placement of a conventional THA. Long term follow-up studies are necessary to see whether this benefit in bone preservation sustains over longer time periods and whether it is turned into clinical benefits at future revision surgery.

Application of sub-regional analysis to bone mineral density of the lower limb from whole body DXA scans

Bone mineral density at spine and hip is widely used to diagnose osteoporosis. Certain conditions cause changes in bone density at other sites, particularly in the lower limb, with fractures occurring in non-classical locations. Bone density changes at these sites would be of interest for diagnosis and treatment. We describe an application, based on an existing software option for Hologic scanners, which allows reproducible measurement of bone density at six lower limb sites (upper femur, mid-femur, lower femur; upper leg, mid-leg, lower leg). In 30 unselected subjects, referred for bone density, precision (CV%) measured on 2 occasions, separated by repositioning, ranged from 1.7% (mid-femur) to 4.5% at the lowest leg site. Intra-operator precision, measured by three operators on ten subjects on three occasions, was between 1.0% and 2.9%, whilst inter-operator precision was between 1.0% and 3.6%, according to region. These values compare well with those at the spine and upper femur, and in the literature. There was no evidence that this operator agreement improved between occasions 1 and 3. This technique promises to be useful for assessing bone changes at vulnerable sites in the lower limb, in diverse pathological states and in assessing response to treatment.

Shortening of an anatomical stem, how short is short enough? An in vitro study of load transfer and primary stability

An anatomical stem should be short enough to avoid distal locking and distal load transfer but long enough to ensure adequate primary stability of the stem. In this in vitro study, the cortical strains in the femur and the primary stability of the stem were measured after insertion of Anatomic Benoist Girard-I anatomical stems with gradually reduced stem length in six human cadaver femurs in order to find the optimal stem length. A shortening of 40–50 mm, corresponding to a stem extending 30–40 mm below the lesser trochanter, did not affect stem stability but nearly normalized the load distribution in the lower metaphysis and upper diaphysis. The large strain shielding observed in the calcar region was not influenced by shortening of the stem.

A prospective cohort study on the short collum femoris-preserving (CFP) stem using RSA and DXA. Primary stability but no prevention of proximal bone loss in 27 patients followed for 2 years

BACKGROUND AND PURPOSE

Short femoral stems have been introduced in total hip arthroplasty in order to save proximal bone stock. We hypothesized that a short stem preserves periprosthetic bone mineral density (BMD) and provides good primary stability.

METHODS

We carried out a prospective cohort study of 30 patients receiving the collum femoris-preserving (CFP) stem. Preoperative total hip BMD and postoperative periprosthetic BMD in Gruen zones 1-7 were investigated by dual-energy x-ray absorptiometry (DXA), stem migration was analyzed by radiostereometric analysis (RSA), and the Harris hip score (HHS) was determined.

RESULTS

2 patients were excluded intraoperatively and 1 patient was revised due to a deep infection, leaving 27 patients for analysis. The mean HHS increased from 49 (24-79) preoperatively to 99 (92-100) after 2 years. DXA after 1 year showed substantial loss of BMD in Gruen zone 7 (-31%), zone 6 (-19%), and zone 2 (-13%, p < 0.001) compared to baseline BMD determined immediately postoperatively. The bone loss in these regions did not recover after 2 years, whereas the more moderate bone loss in Gruen zones 1, 3, and 5 partially recovered. There was a correlation between low preoperative total hip BMD and a higher amount of bone loss in Gruen zones 2, 6 and 7. RSA showed minor micromotion of the stem: mean subsidence was 0.13 (95% CI: -0.28 to 0.01) mm and mean rotation around the longitudinal axis was 0.01º (95% CI: -0.1 to 0.39) after 2 years.

INTERPRETATION

We conclude that substantial loss in proximal periprosthetic BMD cannot be prevented by the use of a novel type of short, curved stem, and forces appear to be transmitted distally. However, the stems showed very small migration-a characteristic of stable uncemented implants.

The influence of resection height on proximal femoral strain patterns after Metha short stem hip arthroplasty: an experimental study on composite femora

PURPOSE

The number of candidates for a total hip arthroplasty (THA) is steadily increasing, while the average patient age is decreasing for primary THA. The rise in THA is mainly due to excellent clinical outcomes and the extended longevity of modern implants. Short stem arthroplasties with predominantly metaphyseal fixation such as the Metha® stem are suggested for young patients. It is hypothesised that the more physiological load transfer of these devices reduces stress shielding, which in turn may reduce the risk of aseptic loosening. However, patients with femoral deformities often require a deviation of the resection height. To this end, our aim was to evaluate how resection height influences strain patterns in order to characterise possible limits for short stem implantation.

METHODS

Biomechanical testing using ten strain gauges on synthetic bone illustrated the strain patterns of three different resection heights (0, +5 and +10 mm) for the Metha stem.

RESULTS

The greatest differences in strains were displayed at the "high" (most proximal) resection height (+10 mm) when compared to the non-implanted strain pattern. At the medial calcar, the strain was 143% for +10 mm, 96% for +5 mm and 94% for 0 mm. Overall, discrepancies were less for deeper resections.

CONCLUSIONS

The deeper the resection, the more similar the strain patterns are when compared to a non-implanted synthetic bone. Changes in strain patterns are induced by variation in the varus/valgus positioning of the implant and by different offsets.

Neck-preserving femoral stems

BACKGROUND

Surgeons undertaking total hip arthroplasty (THA) routinely perform a distal femoral neck resection. It has been argued that retaining the femoral neck during THA can provide mechanical and biological advantages.

PURPOSES

The objectives of this study were to review: (1) the current evidence on the advantages of femoral neck preservation during THA and (2) the clinical and radiological outcome of neck-preserving femoral stems.

METHODS

A search of the English-language literature on neck-preserving THA and on the individual neck-preserving implants was performed using PubMed, Ovid SP and Science Direct.

RESULTS

Studies have indicated that neck preservation offers superior tri-planar implant stability and allows more accurate restoration of the hip geometry and biomechanics. The trend towards tissue sparing surgery has contributed to the development of bone-conserving short-stem implants that offer variable levels of neck preservation. Despite an initial learning curve, these implants have generated promising early clinical results, with low revision rates and high outcome scores. However, radiological evaluation of some neck-preserving implants has detected a characteristic pattern of proximal femoral bone loss with distal cortical hypertrophy. The long-term implications of this finding are not yet known.

CONCLUSIONS

Preserving the femoral neck during THA has biomechanical advantages. However, long-term outcome data are needed on neck-preserving femoral stems to evaluate on-going bone remodelling and assess implant performance and survival.

Bone remodelling around a cementless straight THA stem: a prospective dual-energy X-ray absorptiometry study

The design of the Bicontact® stem (BBraun, Aesculap, Tuttlingen, Germany) and the implantation technique have undergone no major alterations in the last 20 years leading, and good clinical results have been reported. The aim of our study was to investigate whether the implant encourages beneficial bone remodelling. Twenty-four patients were included in a prospective dual-energy X-ray absorptiometry (DEXA) study of this stem, after appropriate statistical power analysis. Preoperative and postoperative (1 week, 6 months, and 12 months) clinical and DEXA examinations were performed. The Harris Hip Score increased significantly by 39 points. The strongest decreases in BMD were observed in the greater trochanter region (-11%) and the calcar (-12%). In the second half of the study period the bone mineral density recovered slightly and even returned to baseline values in the lesser trochanter region. Therefore, proximal load transfer and physiological bone remodelling around the Bicontact® stem appeared to be achieved.

The cementless Bicontact stem in a prospective dual-energy X-ray absorptiometry study

PURPOSE

The cementless Bicontact total hip arthroplasty (THA) system (AESCULAP AG, Tuttlingen, Germany) was introduced in 1986/1987 and has been in successful clinical use in an unaltered form up to today. Although good long-term results with the Bicontact stem have been published, it is questionable whether the implant provides the criteria for a state-of-the-art stem regarding proximal bone stock preservation. The purpose of the study was to monitor the periprosthetic bone mineral density (BMD) in a prospective two-year follow-up dual-energy X-ray absorptiometry (DEXA) study.

METHODS

After power analysis, a consecutive series of 25 patients with unilateral Bicontact stem implantation was examined clinically and underwent DEXA examinations. Scans of seven regions of interest were taken preoperatively and at one week, six months, and one and two years.

RESULTS

One patient required stem revision due to a deep infection. The Harris Hip Score increased significantly by 44 points. The most significant bone loss was observed in the calcar region (R7) in the first six months (-19.2 %). It recovered in the following 18 months to -8.5 %. The BMD in the greater trochanter dropped significantly after six months and remained stable at this level. BMD exceeded baseline values in distal regions and even more in the lesser trochanter region after two years.

CONCLUSIONS

We conclude that the Bicontact stem provides adequate proximal bone stock preservation. We observed some signs of stress shielding at the tip of the stem, which is inevitable to some degree in THA with cementless straight stems. However, in this prospective DEXA investigation, we showed that proximal off-loading does not occur after THA with the Bicontact system. Thus, we believe that this stem is still a state-of-the-art implant.

Stress-related femoral cortical and cancellous bone density loss after collum femoris preserving uncemented total hip arthroplasty: a prospective 7-year follow-up with quantitative computed tomography

PURPOSE

Bone loss around uncemented femoral components is suspected to precede implant loosening and contribute to problems in revision surgery. Short-stemmed cementless femoral components are designed to preserve proximal femoral bone stock and ultimately the longevity of the prosthesis.

METHODS

With quantitative computed tomography-assisted osteodensitometry, we prospectively analyzed femoral cortical and cancellous bone density (BD) and contact area changes of an uncemented collum femoris preserving stem (n = 38) 10 days, 1, 3 and 7 years post-operatively.

RESULTS

Seven years post-operatively, cancellous BD (mg CaHA/mL) had decreased by as much as -66 % and cortical BD by up to -27 % at the metaphyseal portion of the femur; the decrease was progressive between the 1- and 3-year examinations and halted thereafter. Contact area (in % out of a possible 100 %) decreased proximally between the 1- and 3-year follow-up.

CONCLUSION

Proximal cortical and cancellous bone density loss and decrease of contact area indicate that metaphyseal fixation cannot be achieved. The lack of cortical BD loss and increase of contact area values below the trochanter minor suggest diaphyseal fixation.

Periacetabular cortical and cancellous bone mineral density loss after press-fit cup fixation: a prospective 7-year follow-up

The impact of total hip arthroplasty on strain adaptive bone remodeling has been extensively analyzed by dual-energy x-ray absorptiometry. In this study, we present a prospective computed tomography-assisted study of periacetabular cortical and cancellous bone mineral density (in milligrams of calcium hydroxyapatite [CaHA] per milliliter, or mgCaHA/mL) changes 10 days and 1, 3, and 7 years after press-fit cup implantation for 38 hips in vivo. Cancellous bone mineral density decreased by Ø -63% ventral and Ø -85% dorsal to the cup; cortical bone mineral density, by Ø -22% ventral and Ø -18% dorsal to the cup. The presented periacetabular strain adaptive bone mineral density data are the most extensive of the current literature. Even the measured extensive cancellous bone mineral density loss was thus far of no clinical relevance because all cups showed radiographic signs of stable ingrowth.

[Periprosthetic femoral bone reaction after total hip arthroplasty with preservation of the collum femoris : CT-assisted osteodensitometry 1 and 3 years postoperatively]

BACKGROUND

Short-stemmed cementless femoral components in total hip arthroplasty have been designed to preserve the proximal femoral bone stock by load transfer to the femoral metaphysis. An in vivo method of computed tomography-assisted (CT) osteodensitometry after total hip arthroplasty is presented which differentiates between cortical and cancellous bone density (BD) changes around uncemented femoral components.

PATIENTS AND METHODS

Cortical and cancellous periprosthetic femoral BD (mg Ca HA/ml) was determined prospectively in 31 patients at day 10, 1 year and 3 years after total hip arthroplasty with preservation of the collum femoris (C.F.P.-stem, Link, Hamburg, Germany) using computed tomography-assisted osteodensitometry. Clinical results (Harris hip score) and plain x-rays were assessed in all cases.

RESULTS

Progressive proximal cortical BD loss was observed between the 1 year (Ø -8%) and 3 year (Ø -22%) postoperative measurements. Distal to the trochanter minor no significant cortical BD changes were observed. Proximal cancellous BD decreased progressively between the 1 year (Ø -33%) and 3 year (Ø -45%) analyses. The Harris hip score improved from 45 points pre-operatively to 93 points at the 3 year follow-up. All x-rays showed signs of stable ingrowth.

CONCLUSION

Periprosthetic CT osteodensitometry has the technical ability to discriminate between cortical and cancellous bone structures with respect to strain-adapted remodeling. Progressive proximal cortical and cancellous BD loss indicates that metaphyseal fixation cannot be achieved with the analyzed C.F.P. stem design. The lack of cortical BD loss below the trochanter minor suggests diaphyseal fixation of the implanted stem.