Guava Seed Oil: Potential Waste for the Rhamnolipids Production

Guava is consumed in natura and is also of considerable importance to the food industry. The seeds and peel of this fruit are discarded, however, guava seeds yield oil (~13%) that can be used for the bioproducts synthesis. The use of a by-product as a carbon source is advantageous, as it reduces the environmental impact of possible harmful materials to nature, while adding value to products. In addition, the use of untested substrates can bring new yield and characterization results. Thus, this research sought to study rhamnolipids (RLs) production from guava seed oil, a by-product of the fructorefinery. The experiments were carried out using Pseudomonas aeruginosa LBI 2A1 and experimental design was used to optimize the variables Carbon and Nitrogen concentration. Characterization of RLs produced occurred by LC-MS. In this study, variables in the quadratic forms and the interaction between them influenced the response (p < 0.05). The most significant variable was N concentration. Maximum RLs yield achieved 39.97 g/L, predominantly of mono-RL. Characterization analysis revealed 9 homologues including the presence of RhaC10C14:2 (m/z 555) whose structure has not previously been observed. This research showed that guava seed oil is an alternative potential carbon source for rhamnolipid production with rare rhamnolipid homologues.

Silver nanoparticles stabilized by ramnolipids: Effect of pH

Rhamnolipids are glycolipid biosurfactants that have remarkable physicochemical characteristics, such as the capacity for self-assembly, which makes these biomolecules a promising option for application in nanobiotechnology. Rhamnolipids produced from a low-cost carbon source (glycerol) were used to stabilize silver nanoparticles. Silver nanoparticles (AgNPs) have been the subject of studies due to their physical chemical as well as biological properties, which corroborate their catalytic and antimicrobial activity. We compared nanoparticles obtained with three different pH values during synthesis (5, 7 and 9) in the presence of rhamnolipids. Dynamic light scattering showed that larger particles were formed at pH 5 (78-190 nm) compared to pH 7 (6.5-43 nm) and 9 (5.6-28.1 nm). Moreover, nanoparticle stability (analyzed based on the zeta potential) was enhanced with the increase in pH from 5 to 9 (-29.86 ± 1.04, -37.83 ± 0.90 and -40.33 ± 0.57 mV, respectively). Field emission gun scanning electron microscopy confirmed the round morphology of the silver nanoparticles. The LSPR spectra of AgNP for the pHs studied are conserved. In conclusion, different pH values in the presence of rhamnolipids used in the synthesis of silver nanoparticles directly affect nanoparticle size and stability.

Rhamnolipid-Based Liposomes as Promising Nano-Carriers for Enhancing the Antibacterial Activity of Peptides Derived from Bacterial Toxin-Antitoxin Systems

Background

Antimicrobial resistance poses substantial risks to human health. Thus, there is an urgent need for novel antimicrobial agents, including alternative compounds, such as peptides derived from bacterial toxin-antitoxin (TA) systems. ParELC3 is a synthetic peptide derived from the ParE toxin reported to be a good inhibitor of bacterial topoisomerases and is therefore a potential antibacterial agent. However, ParELC3 is inactive against bacteria due to its inability to cross the bacterial membranes. To circumvent this limitation we prepared and used rhamnolipid-based liposomes to carry and facilitate the passage of ParELC3 through the bacterial membrane to reach its intracellular target - the topoisomerases.

Methods and Results

Small unilamellar liposome vesicles were prepared by sonication from three formulations that included 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and cholesterol. ParELC3 was loaded with high efficiency into the liposomes. Characterization by DLS and TEM revealed the appropriate size, zeta potential, polydispersity index, and morphology. In vitro microbiological experiments showed that ParELC3 loaded-liposomes are more efficient (29 to 11 µmol·L⁻¹) compared to the free peptide (>100 µmol·L⁻¹) at inhibiting the growth of standard E. coli and S. aureus strains. RL liposomes showed high hemolytic activity but when prepared with POPC and Chol this activity had a significant reduction. Independently of the formulation, the vesicles had no detectable cytotoxicity to HepG2 cells, even at the highest concentrations tested (1.3 mmol·L⁻¹ and 50 µmol·L⁻¹ for rhamnolipid and ParELC3, respectively).

Conclusion

The present findings suggest the potential use of rhamnolipid-based liposomes as nanocarrier systems to enhance the bioactivity of peptides.

Biodegradation of selected hydrocarbons by novel bacterial strains isolated from contaminated Arabian Gulf sediment

Three strains of novel bacteria were isolated from oil-contaminated sediment from the Arabian Gulf (Brevibacillus brevis T2C2008, Proteus mirabilis T2A12001, and Rhodococcus quinshengi TA13008). The isolated strains were tested for their degrading efficacy of low and high molecular hydrocarbon (naphthalene and pyrene). The efficacy of the two-hydrocarbon degradation by the isolates bacterial was determined at a temperature of 25 °C and 37 °C and pH of 5.0 and 9.0. In inoculated media at 37 °C, Rhodococcus qinshengi fully metabolized naphthalene and degrade 56% of pyrene. Brevibacillus brevis break down over 80% of naphthalene at room temperatures (25 °C). However, it was found that P. mirabilis and R. qinshengi biodegraded nearly 94% of naphthalene in the incubated media. The capacity for pyrene and naphthalene degradation in varying pH and temperature conditions was shown to be significant in Rhodococcus qinshengi because of its mineralization exceeding 50% across the tested pH and temperature. This implies that the isolated strains are ideal for biodegradation of contaminated sediment with naphthalene and pyrene.

Biodiesel byproduct bioconversion to rhamnolipids: Upstream aspects

This study focused on two important aspects of the upstream process: the appropriate use of crude glycerol as a low-cost carbon source, and strain selection. The effect of different crude glycerol concentrations on rhamnolipid biosynthesis by two Pseudomonas aeruginosa strains (wild type LBI and mutant LBI 2A1) was studied. Finally, the synthesized rhamnolipids were characterized by mass spectrometry. When both strains were compared, 50 g/L was the most favorable concentration for both, but P. aeruginosa LBI 2A1 showed an increase in rhamnolipid production (2.55 g/L) of 192% over wild type (1.3 g/L). The higher rhamnolipid production could be related to a possible mechanism developed after the mutation process at high antibiotic concentrations. Mass spectrometry confirmed the glycolipid nature of the produced biosurfactant, and the homologue composition showed a wide mixture of mono and di-rhamnolipids. These results show that high glycerol concentrations can inhibit microbial metabolism, due to osmotic stress, leading to a better understanding of glycerol metabolism towards its optimization in fermentation media. Since P. aeruginosa LBI 2A1 showed higher conversion yields than P. aeruginosa LBI, the use of a mutant strain associated with a low cost carbon source might improve biosurfactant biosynthesis, therefore yielding an important upstream improvement.

Characterization of rhamnolipids by liquid chromatography/mass spectrometry after solid-phase extraction

Rhamnolipids are surface-active agents with a broad application potential that are produced in complex mixtures by bacteria of the genus Pseudomonas. Analysis from fermentation broth is often characterized by laborious sample preparation and requires hyphenated analytical techniques like liquid chromatography coupled to mass spectrometry (LC-MS) to obtain detailed information about sample composition. In this study, an analytical procedure based on chromatographic method development and characterization of rhamnolipid sample material by LC-MS as well as a comparison of two sample preparation methods, i.e., liquid-liquid extraction and solid-phase extraction, is presented. Efficient separation was achieved under reversed-phase conditions using a mixed propylphenyl and octadecylsilyl-modified silica gel stationary phase. LC-MS/MS analysis of a supernatant from Pseudomonas putida strain KT2440 pVLT33_rhlABC grown on glucose as sole carbon source and purified by solid-phase extraction revealed a total of 20 congeners of di-rhamnolipids, mono-rhamnolipids, and their biosynthetic precursors 3-(3-hydroxyalkanoyloxy)alkanoic acids (HAAs) with different carbon chain lengths from C8 to C14, including three rhamnolipids with uncommon C9 and C11 fatty acid residues. LC-MS and the orcinol assay were used to evaluate the developed solid-phase extraction method in comparison with the established liquid-liquid extraction. Solid-phase extraction exhibited higher yields and reproducibility as well as lower experimental effort.