Effects of Ethylene Propylene Diene Monomer (EPDM)-Based Polar Macromolecular Compatibilizers on the Low-Temperature Properties of Fluoroelastomer/EPDM Rubber Blends

Integrating rubber with superior low-temperature capabilities, such as ethylene propylene diene monomer (EPDM), is a strategic approach to bolster the low-temperature performance of fluoroelastomer (FKM). However, FKM and EPDM are thermodynamically incompatible. This work synthetized three EPDM-based polar macromolecular compatibilizers, epoxidized EPDM (EPDM-EP), 2,2-trifluoroethylamine-grafted epoxidized EPDM (EPDM-TF), and 2,4-difluorobenzylamine-grafted epoxidized EPDM (EPDM-DF), to enhance the compatibility between FKM and EPDM. These compatibilizers were subsequently incorporated into FKM/EPDM rubber blends. The results revealed that the glass transition temperature (Tg) of FKM/EPDM decreased by 1.3 °C, 2.68 °C, and 2.78 °C, respectively, upon the addition of 10 phr of EPDM-EP, EPDM-TF, or EPDM-DF. Moreover, the Tg of the two phases converged. The tensile strength, elongation at break, and tear strength of the FKM/EPDM rubber blends were also enhanced by the inclusion of these compatibilizers. Notably, EPDM-TF and EPDM-DF exhibited remarkable compatibilization effects due to an increase in polarity. This research not only sheds light on the potential for developing new compatibilizers but also paves the way for innovative applications of FKM and its derivatives.

Ultra-tough artificial woods of polyphenol-derived biodegradable Co-polymer with Poly(butylene succinate)

Large productions of plastics worldwide are greater concern to the environment because of their non degradability and thus, damaging the ecosystem. Recent advancements in biobased plastics are growing exponentially because of their promise of a sustainable environment. Biobased polycoumarates plastics have a wood-like appearance with liquid crystalline grains, light brown color, and cinnamon-like aroma, but have very low toughness. The polycoumarates were hybridized via main-chain transesterification with poly (butylene succinate) (PBS). PBS itself being a biobased material has added more value to the final product due to biodegradability. The mechanical flexibility and toughness of the bio-based copolymers were controlled by varying the PBS content. As a result, well-processable and in-soil degradable artificial woods with a high strain energy density of approximately 76 MJ/m³ were developed while maintaining the wood-like appearance.

Effects of In-Process Temperatures and Blending Polymers on Acrylonitrile Butadiene Styrene Blends

Acrylonitrile butadiene styrene (ABS) is a renowned commodity polymer for additive manufacturing, particularly fused deposition modelling (FDM). The recent large-scale applications of 3D-printed ABS require stable mechanical properties than ever needed. However, thermochemical scission of butadiene bonds is one of the contemporary challenges affecting the overall ABS stability. In this regard, literature reports melt-blending of ABS with different polymers with high thermal resistance. However, the comparison for the effects of different polymers on tensile strength of 3D-printed ABS blends was not yet reported. Furthermore, the cumulative studies comprising both blended polymers and in-process thermal variables for FDM were not yet presented as well. This research, for the first time, presents the statistical comparison of tensile properties for the added polymers and in-process thermal variables (printing temperature and build surface temperature). The research presents Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) to explain the thermochemical reasons behind achieved mechanical properties. Overall, ABS blend with PP shows high tensile strength (≈31 MPa) at different combinations of in-process parameters. Furthermore, some commonalities among both blends are noted, i.e., the tensile strength improves with increase of surface (bed) and printing temperature.

Study of Surface Mechanical Characteristics of ABS/PC Blends Using Nanoindentation

Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) are considered a well-known class of engineering thermoplastics due to their efficient use in automotive, 3D printing, and electronics. However, improvement in toughness, processability, and thermal stability is achieved by mixing together ABS and PC. The present study focuses on the understanding of surface mechanical characterization of acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) blends using nano-indentation. Polymer blends sheets with three different proportions of ABS/PC (75:25, 50:50, and 25:75) were fabricated via melt-processing and thermal press. Fourier transform infrared (FTIR) spectroscopy was performed to analyze the intermolecular interactions between the blends’ components. To understand the surface mechanical properties of ABS and PC blends, a sufficient number of nano-indentation tests were performed at a constant loading rate to a maximum load of 100 mN. Creeping effects were observed at the end of loading and start of unloading section. Elastic modulus, indentation hardness, and creep values were measured as a function of penetration displacement in the quasi-continuous stiffness mode (QCSM) indentation. Load-displacement curves indicated an increase in the displacement with the increase in ABS contents while a decreasing trend was observed in the hardness and elastic modulus values as the ABS content was increased. We believe this study would provide an effective pathway for developing new polymer blends with enhanced mechanical performance.

Decomposition of polycarbonate/acrylonitrile-butadiene-styrene blends in e-waste packaging resin and recovery of debrominated carbon materials by supercritical water oxidation process

Polycarbonate/acrylonitrile-butadiene-styrene blends (PC/ABS) has become one of the most common polymer insulation materials as packaging resin in electronics industry, due to its excellent mechanical, flame retardant and insulating properties. Once electronic products are eliminated and discarded, refractory PC/ABS will become a huge obstacle to e-waste recycling. Conventional solid waste treatment methods may lead to the release of toxic organobromine compounds and endocrine interferons, posing a threat to the environment and human health. In this study, supercritical water oxidation (SCWO) process was applied to decompose PC/ABS as e-waste packaging resin. The results showed that waste PC/ABS could be environmentally friendly and efficiently decomposed and debrominated during SCWO process. The decomposition mechanism could be proposed as depolymerization, generation of free radicals, conjugation of free radicals and carbonization. The debrominated products such as carbon materials, small molecular weight hydrocarbons, carbon dioxide and water were obtained and could be recycled as chemical feedstocks. The optimum SCWO parameters were temperature of 500 °C, holding time of 90 min, pressure of 23 MPa, and excess oxygen of 100%, respectively. The maximum weight loss rate and debromination rate of waste PC/ABS were 78.57% and 99.62%. Thus, the process developed in this study provided a green and sustainable approach for disposal of e-waste packaging resin.