Cell structure-impact property relationship of polypropylene/thermoplastic elastomer blend foams

Morphological, Mechanical and Thermal Properties of Rubber Foams: A Review Based on Recent Investigations

During recent decades, rubber foams have found their way into several areas of the modern world because these materials have interesting properties such as high flexibility, elasticity, deformability (especially at low temperature), resistance to abrasion and energy absorption (damping properties). Therefore, they are widely used in automobiles, aeronautics, packaging, medicine, construction, etc. In general, the mechanical, physical and thermal properties are related to the foam's structural features, including porosity, cell size, cell shape and cell density. To control these morphological properties, several parameters related to the formulation and processing conditions are important, including foaming agents, matrix, nanofillers, temperature and pressure. In this review, the morphological, physical and mechanical properties of rubber foams are discussed and compared based on recent studies to present a basic overview of these materials depending on their final application. Openings for future developments are also presented.

Microbubble technology for natural rubber latex foam production: The use of various gas-filled microbubbles

In recent years, microbubble technology has attracted great attention in many application fields including water treatment, food processing, oil recovery, surface cleaning, and therapeutic applications. In this paper, microbubbles (MBs) of air, nitrogen, and argon were applied to produce natural rubber latex foams (NRLFs). The bubbles were generated by flowing the gas through a porous diffuser and latex. The effect of gas source on cellular structure, density, elasticity, indentation hardness, and flammability of the bubbled foams was discussed. Argon MBs offered the latex foams with fine cell diameters and uniform cell size distribution resulting in enhanced elasticity and physical properties of the foams. Indentation hardness index and limiting oxygen index value depended significantly on the gas used. By using the microbubble technique, the future prospects in NRLF production can be expected due to its ability in controllable cellular structure.

Chemistry, Processing, Properties, and Applications of Rubber Foams

With the ever-increasing development in science and technology, as well as social awareness, more requirements are imposed on the production and property of all materials, especially polymeric foams. In particular, rubber foams, compared to thermoplastic foams in general, have higher flexibility, resistance to abrasion, energy absorption capabilities, strength-to-weight ratio and tensile strength leading to their widespread use in several applications such as thermal insulation, energy absorption, pressure sensors, absorbents, etc. To control the rubber foams microstructure leading to excellent physical and mechanical properties, two types of parameters play important roles. The first category is related to formulation including the rubber (type and grade), as well as the type and content of accelerators, fillers, and foaming agents. The second category is associated to processing parameters such as the processing method (injection, extrusion, compression, etc.), as well as different conditions related to foaming (temperature, pressure and number of stage) and curing (temperature, time and precuring time). This review presents the different parameters involved and discusses their effect on the morphological, physical, and mechanical properties of rubber foams. Although several studies have been published on rubber foams, very few papers reviewed the subject and compared the results available. In this review, the most recent works on rubber foams have been collected to provide a general overview on different types of rubber foams from their preparation to their final application. Detailed information on formulation, curing and foaming chemistry, production methods, morphology, properties, and applications is presented and discussed.

Unique Compatibilized Thermoplastic Elastomer with High Strength and Remarkable Ductility: Effect of Multiple Point Interactions within a Rubber-Plastic Blend

In the case of thermoplastic elastomers (TPEs) based on nonpolar polypropylene (PP) and polar rubbers, a small quantity of a third component known as the compatibilizer is added to maximize the compatibility between the incompatible blend components. Generally, one part of the compatibilizer reacts with the nonpolar PP phase and the other part of the compatibilizer reacts with the polar rubber phase, which in turn produces TPEs with useful properties. Till today, there have been no reports in the literature that examine the effect of a compatibilizer that can have multifaceted interactions with the incompatible blend components for the development of TPEs with unique properties. Accordingly, here, an ethylene-acrylic ester-maleic anhydride terpolymer (E-AE-MA-TP) has been used as the compatibilizer for the preparation of TPEs based on nonpolar isotactic polypropylene (i-PP) and polar epichlorohydrin rubber (ECR). The E-AE-MA-TP compatibilizer contains ethylene groups, acrylic groups, and anhydride/acid groups along its backbone, which act as the sites for establishing multifaceted interactions with both i-PP and ECR. The compatibilization efficiency of the E-AE-MA-TP compatibilizer has been analyzed by contact angle measurements, Fourier transform infrared (FTIR) spectroscopy, tensile stress-strain studies, mixing torque profiles, rheological studies, differential scanning calorimetry (DSC), field emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM) images. The particle size of the dispersed ECR domains in the i-PP matrix of the i-PP/ECR blend prominently decreases (∼90% reduction) by incorporation of a very low dosage (5 wt %) of the E-AE-MA-TP compatibilizer. The i-PP/ECR (40 wt %/60 wt %) blend containing 5 wt % compatibilizer displays outstanding mechanical properties (especially strain at break value (∼370%)), which are superior to the mechanical properties of several compatibilized TPEs (based on PP and polar rubbers) reported in the literature. The unique properties of TPEs based on i-PP and ECR in the presence of the E-AE-MA-TP compatibilizer is attributed to the efficacy of the E-AE-MA-TP compatibilizer to establish multifaceted interactions with both i-PP and ECR.

Development of Poly (Lactide Acid) Foams with Thermally Expandable Microspheres

This study presents the investigation of different content of thermally expandable microsphere (EMS) type of a physical blowing agent added to polylactic acid (PLA). The effects of the different doses of EMS, processing temperatures, and d-lactide content of the polylactic acid were analyzed for foam properties and structures. We characterized the different PLAs and the physical blowing agent with different testing methods (gel permeation chromatography, rotational rheometry, isothermal thermogravimetric analysis, and thermomechanical analysis). The amounts of the foaming agent were 0.5, 1, 2, 4, 8 wt%, and processing temperatures were 190 °C, 210 °C, and 230 °C. The foam structures were produced by twin-screw extrusion. We used scanning electron microscopy to examine the cell structure of the foams produced, and carried out morphological and mechanical tests as well. The result of extrusion foaming of PLA using different amounts of EMS shows that an exponentially decreasing tendency of density reduction can be achieved, described by the following equation, ρ(x)=1.062∙e-x7.038+0.03 (R² = 0.947) at 190 °C. With increasing processing temperature, density decreases at a lower rate, due to the effect that the microspheres are unable to hold the pentane gas within the polymer shell structure. The d-lactide content of the PLAs does not have a significant effect on the density of the produced foam structures.

Process Development of CO2-Assisted Polymer Compression for High Productivity: Improving Equipment and the Challenge of Numbering-Up

The CO2-assisted polymer compression method is used herein to prepare porous polymer materials by bonding laminated polymer fiber sheets using a piston in the presence of CO2. In this work, the CO2 flow line connections were moved from the pressure vessel to the piston to increase productivity, which makes the pressure vessel free-moving and the processing time of sample introduction and removal seemingly zero. In addition, a numbering-up method suitable for CO2-assisted polymer compression is proposed and verified based on the variability of the products. The variability of the product was evaluated using porosity, which is one of the most important properties of a porous material. It is found that the CO2 exhaust process, specific to this method, that uses high-pressure CO2, causes product variation, which can be successfully suppressed by optimizing the CO2 exhaust process.