Cheesemaking in highland pastures: Milk technological properties, cream, cheese and ricotta yields, milk nutrients recovery, and products composition

Interrelationships among physical and chemical traits of cheese: Explanatory latent factors and clustering of 37 categories of cheeses

Cheese presents extensive variability in physical, chemical, and sensory characteristics according to the variety of processing methods and conditions used to create it. Relationships between the many characteristics of cheeses are known for single cheese types or by comparing a few of them, but not for a large number of cheese types. This case study used the properties recorded on 1,050 different cheeses from 107 producers grouped into 37 categories to analyze and quantify the interrelationships among the chemical and physical properties of many cheese types. The 15 cheese traits considered were ripening length, weight, firmness, adhesiveness, 6 different chemical characteristics, and 5 different color traits. As the 105 correlations between the 15 cheese traits were highly variable, a multivariate analysis was carried out. Four latent explanatory factors were extracted, representing 86% of the covariance matrix: the first factor (38% of covariance) was named Solids because it is mainly linked positively to fat, protein, water-soluble nitrogen, ash, firmness, adhesiveness, and ripening length, and negatively to moisture and lightness; the second factor (24%) was named Hue because it is linked positively to redness/blueness, yellowness/greenness, and chroma, and negatively to hue; the third factor (17%) was named Size because it is linked positively to weight, ripening length, firmness, and protein; and the fourth factor (7%) was named Basicity because it is linked positively to pH. The 37 cheese categories were grouped into 8 clusters and described using the latent factors: the Grana Padano cluster (characterized mainly by high Size scores); hard mountain cheeses (mainly high Solids scores); very soft cheeses (low Solids scores); blue cheeses (high Basicity scores), yellowish cheeses (high Hue scores), and 3 other clusters (soft cheeses, pasta filata and treated rind, and firm mountain cheeses) according to specific combinations of intermediate latent factors and cheese traits. In this case study, the high variability and interdependence of 15 major cheese traits can be substantially explained by only 4 latent factors, allowing us to identify and characterize 8 cheese type clusters.

Coupling dairy wastewaters for nutritional balancing and water recycling: sustainable heterologous 2-phenylethanol production by engineered cyanobacteria

Microalgae biotechnology is hampered by the high production costs and the massive usage of water during large-volume cultivations. These drawbacks can be softened by the production of high-value compounds and by adopting metabolic engineering strategies to improve their performances and productivity. Today, the most sustainable approach is the exploitation of industrial wastewaters for microalgae cultivation, which couples valuable biomass production with water resource recovery. Among the food processing sectors, the dairy industry generates the largest volume of wastewaters through the manufacturing process. These effluents are typically rich in dissolved organic matter and nutrients, which make it a challenging and expensive waste stream for companies to manage. Nevertheless, these rich wastewaters represent an appealing resource for microalgal biotechnology. In this study, we propose a sustainable approach for high-value compound production from dairy wastewaters through cyanobacteria. This strategy is based on a metabolically engineered strain of the model cyanobacterium Synechococcus elongatus PCC 7942 (already published elsewhere) for 2-phenylethanol (2-PE). 2-PE is a high-value aromatic compound that is widely employed as a fragrance in the food and cosmetics industry thanks to its pleasant floral scent. First, we qualitatively assessed the impact of four dairy effluents on cyanobacterial growth to identify the most promising substrates. Both tank-washing water and the liquid effluent of exhausted sludge resulted as suitable nutrient sources. Thus, we created an ideal buffer system by combining the two wastewaters while simultaneously providing balanced nutrition and completely avoiding the need for fresh water. The combination of 75% liquid effluent of exhausted sludge and 25% tank-washing water with a fine-tuning ammonium supplementation yielded 180 mg L-1 of 2-PE and a biomass concentration of 0.6 gDW L-1 within 10 days. The mixture of 90% exhausted sludge and 10% washing water produced the highest yield of 2-PE (205 mg L-1) and biomass accumulation (0.7 gDW L-1), although in 16 days. Through these treatments, the phosphates were completely consumed, and nitrogen was removed in a range of 74%-77%. Overall, our approach significantly valorized water recycling and the exploitation of valuable wastewaters to circularly produce marketable compounds via microalgae biotechnology, laying a promising groundwork for subsequent implementation and scale-up.

Variations in Composition, Antioxidant Profile, and Physical Traits of Goat Milk within the Semi-Intensive Production System in Mountainous Areas during the Post-Weaning to End-of-Lactation Period

Dairy products from mountain-origin milk are known for their superior composition and quality. This study aimed to examine changes in composition, nutritional quality, and antioxidant properties of milk from semi-intensively managed goats in mountainous regions during the post-weaning to end-of-lactation period. Bulk tank milk samples from 10 farms were collected bi-weekly in the period from March to September. The farms were situated in regions with an average altitude of 772.20 m above sea level. The results revealed significant variations in milk composition, with fluctuations in fat, protein, lactose, and total solids. Milk yield per doe showed seasonal differences, with the highest yield in April and the lowest in September. Fatty acid composition exhibited changes throughout the sampling period, with variations in polyunsaturated fatty acids. Nutritional indices, such as the atherogenicity index and thrombogenicity index, remained within the recommended values. Antioxidant properties, including total phenolic content, DPPH, FRAP, and ABTS, showed significant differences, with higher values toward the end of the study. Milk pH, electrical conductivity, brix value, and refractive index also exhibited variations, while density and freezing point remained relatively stable. The study provided valuable information that can be used to develop breeding and feeding plans to achieve uniform milk quality in mountainous regions.

Graduate Student Literature Review: History, technologies of production, and characteristics of ricotta cheese

This review focused on the historical, technological, and analytical characteristics of ricotta cheese available in the literature. Ricotta cheese is a typical dairy product that originated from Italy, used in the preparation of several traditional dishes, both sweet and salted. The available studies pertaining to ricotta cheese revealed a considerable biodiversity in the production with a large number of varieties produced, whose production varies according to the local uses and customs. The review shows the main chemical and microbial characteristics of the product and also the several parameters that affect the mechanism of the production process and the final characteristics of the product, including the raw materials, the processing methods, the season, the animals' diet, the animals' species, and breeds. Ricotta production can be artisanal or industrial, with differences in the making process. New trends in ricotta cheese production have been developed, with particular attention to the functional effect on human health and the novel technologies applied to extend the shelf-life of the products. Currently, it is not easy to find these new developments in the market, probably related to the cost of production, which is not always bearable by the farms. However, despite the large classification reported and the great interest by the cheese industry, just a few numbers of studies were found for artisanal ricotta productions, which still need to be characterized and studied.

Major Causes of Variation of External Appearance, Chemical Composition, Texture, and Color Traits of 37 Categories of Cheeses

Cheeses are produced by many different procedures, giving rise to many types differing in ripening time, size, shape, chemical composition, color, texture, and sensory properties. As the first step in a large project, our aim was to characterize and quantify the major sources of variation in cheese characteristics by sampling 1050 different cheeses manufactured by over 100 producers and grouped into 37 categories (16 with protected designation of origin, 4 traditional cheese categories, 3 pasta filata cheese categories, 5 flavored cheese categories, 2 goat milk categories, and 7 other categories ranging from very fresh to very hard cheeses). We obtained 17 traits from each cheese (shape, height, diameter, weight, moisture, fat, protein, water soluble nitrogen, ash, pH, 5 color traits, firmness, and adhesiveness). The main groups of cheese categories were characterized and are discussed in terms of the effects of the prevalent area of origin/feeding system, species of lactating females, main cheese-making technologies, and additives used. The results will allow us to proceed with the further steps, which will address the interrelationships among the different traits characterizing cheeses, detailed analyses of the nutrients affecting human health and sensorial fingerprinting.

Graduate Student Literature Review: Current understanding of the influence of on-farm factors on bovine raw milk and its suitability for cheesemaking

Relationships between dairy farm practices, the composition and properties of raw milk, and the quality of the resulting cheese are complex. In this review, we assess the effect of farm factors on the quality of bovine raw milk intended for cheesemaking. The literature reports several prominent farm-related factors that are closely associated with milk quality characteristics. We describe their effects on the composition and technological properties of raw milk and on the quality of the resulting cheese. Cow breed, composite genotype, and protein polymorphism all have noticeable effects on milk coagulation, cheese yield, and cheese composition. Feed and feeding strategy, dietary supplementation, housing and milking system, and seasonality of milk production also influence the composition and properties of raw milk, and the resulting cheese. The microbiota in raw milk is influenced by on-farm factors and by the production environment, and may influence the technological properties of the milk and the sensory profile of certain cheese types. Advances in research dealing with the technological properties of raw milk have undoubtedly improved understanding of how on-farm factors affect milk quality attributes, and have refuted the concept of one milk for all purposes. The specific conditions for milk production should be considered when the milk is intended for the production of cheese with unique characteristics. The scientific identification of these conditions would improve the current understanding of the complex associations between raw milk quality and farm and management factors. Future research that considers dairy landscapes within broader perspectives and develops multidimensional approaches to control the quality of raw milk intended for long-ripening cheese production is recommended.

Changes in Fatty Acid and Volatile Compound Profiles during Storage of Smoked Cheese Made from the Milk of Native Polish Cow Breeds Raised in the Low Beskids

This study investigated changes in the proximate chemical composition and profiles of fatty acids and volatile compounds of 12 smoked cheeses made from the milk of native Polish cow breeds used in Beskid Niski. Analyses were performed during the shelf life i.e., in the 1st, 21st, 42nd and 69th day of storage. Studies have shown that thanks to smoking and vacuum-packing, the chemical composition of cheese remained stable throughout the whole shelf-life. Up until the 21st day of storage, there were no statistically significant changes in the profile of fatty acids as well as volatile compounds. Changes were observed only after the mentioned storage time. After 21 days, there was a significant (p < 0.05) and steady decrease (up to day 69) in the proportion of odd-chain (by about 36%), branched-chain (by about 17%) and unsaturated fatty acids (by slightly over 1%). Among unsaturated fatty acids (p < 0.05), however, there was a significant increase in the proportion of monounsaturated fatty acids (by 5%) and a decrease in polyunsaturated fatty acids of nearly 12%. Storage lowered (by 47% in the 69th day of storage) the content of the conjugated linoleic acids (CLA), as well as lowered the n6 to n3 fatty acids ratio. During the 69 days of storage, the content of carboxylic acids increased to more than 50%. In the period from the 42nd to 69th day of cheese storage, the content of butyric acid and hexanoic acids increased twofold, whereas that of octanoic acid increased more than tenfold. Fifty-four volatile compounds were identified in the cheese. The largest group was ketones (34%), whose level decreased during storage, with 2-butanone, 3-hydroxy- (acetoin) and 2-butanone predominating. The research found that due to their low odor threshold, carboxylic acids may have negatively affected the flavor profile of the cheese.

Properties of Rennet Cheese Made from Whole and Skimmed Summer and Winter Milk on a Traditional Polish Dairy Farm

Simple Summary

Milk from traditional family farms is a valuable raw material for cheese making. The aim of the study was to compare the textural and physicochemical characteristics, as well as the organoleptic properties, of soft rennet cheese from the milk of Polish Holstein–Friesian cows. The tests were carried out on 24 cheeses made from the bulk milk in the two production seasons: summer (July–September) and winter (January–March). The results indicate that both the season and the fat content of the milk affected the physicochemical (acidity, color) and rheological parameters (firmness and stickiness) of the cheese. What is more, the fat content of the milk had a more significant effect on the organoleptic parameters of the cheese than the season. In addition, low-fat cheeses received satisfactory organoleptic assessments, which indicates that they can serve as substitutes for full-fat cheeses for people looking for low-fat products.

Abstract

The aim of this study was to compare the rheological and physicochemical parameters, as well as the organoleptic properties, of soft rennet cheese made from whole and skimmed milk in different seasons on a traditional family farm. We analyzed milk from twenty Polish Holstein–Friesian cows for basic composition, number of somatic cells, acidity, and color in terms of the Comission Internationale de l’Eclairage (CIE) lightness*redness*yellowness (L*a*b*) system, and 24 cheeses in terms of texture, acidity, color in terms of the CIE L*a*b* system, and organoleptic parameters in summer and winter. We determined the effects of the season and the fat content of milk on the pH, titratable acidity, color, firmness, and stickiness of the cheese. Cheeses from summer milk showed greater acidification than those from winter milk (p ≤ 0.05). Skimmed milk cheeses from both seasons showed increased firmness and stickiness, and worse organoleptic characteristics, particularly in taste and consistency, than whole milk cheeses (p ≤ 0.05). The highest level of yellow (b*) was found in whole milk summer cheeses; those produced in winter were 16% less yellow. Milk from traditional family farms is a valuable raw ingredient for the production of soft, unripe rennet cheese. However, the variability of organoleptic characteristics related to the season should be taken into account in cheese production. Skimmed cheese can serve as an alternative to full-fat cheese, especially for people looking for low-fat products, regardless of the time of year.

Short communication: Clostridial spore counts in vat milk of Alpine dairies

One of the most severe quality defects in hard and semi-hard cheese, the late blowing defect, is caused by endospore-forming bacteria of the genus Clostridium. To minimize financial losses and waste of resources due to cheese spoilage, raw milk with elevated clostridial spore counts should not be used for the production of certain cheese types. In this context, threshold values of clostridial spore concentrations that cause quality defects in cheese are still under debate. To improve our understanding about late blowing defects, further information on the correlation between clostridial spore concentrations in milk and cheese quality is indispensable. Thus, the aim of this study was to monitor the microbiological quality of milk used for Alpine cheese production regarding clostridial endospore levels to facilitate the establishment of threshold spore concentrations that guarantee the absence of quality defects in Austrian cheese. For this purpose, we monitored clostridial endospore levels in vat milk of 4 Alpine dairies throughout the summer grazing period in 2018. Surprisingly, we observed almost complete absence of butyric acid-producing clostridia in milk and no blowing defects in cheese. Hence, critical clostridial spore concentrations could not be verified. Moreover, the observed low spore levels reveal that the prohibition of silage feeding and good farming practices effectively minimize clostridial endospore counts in milk and ensure the manufacture of high-quality cheese even if technological possibilities are limited.

Effects of three different diets on the fatty acid profile and sensory properties of fresh Pecorino cheese "Primo Sale"

Objective

This study aimed to evaluate and compare the effects of three different diets on the fatty acids (FA) profile and sensory properties of a characteristic Italian fresh cheese: Pecorino “Primo Sale” (PS).

Methods

Fifty-four sheep were divided into three feeding groups: total mixed ration (TMR) enriched with extruded linseed (TL), control diet with TMR without any integration (TC), and pasture (P). During cheese production, six cheeses per experimental group were produced each week, stored for 10 days at 4°C, and then analyzed for chemical composition, FA profile, and sensory properties.

Results

Saturated fatty acids (SFA) were significantly higher in PS from group TC (82.11%) than in cheese from other two groups (P 75.48% and TL 66.83%). TL and P groups presented higher values of polyunsaturated fatty acids, 4.35 and 3.65%, respectively, than that of TC group (2.31%). The lowest SFA/unsaturated fatty acid ratio was found in TL and P groups, while the highest was found in the TC group. Vaccenic acid and conjugated linoleic acid (CLA) were higher in group P (p<0.05) than in groups L and TC. Sensory properties of cheese from group P received the highest scores for odor intensity and friability, while control group had a greater chewing consistency. Overall, all cheeses received good scores for acceptability.

Conclusion

In conclusion, this study showed how the integration of extruded linseed improved the FA profile of fresh pecorino cheese PS preserving its sensory properties. Levels of CLA in the PS group achieved using this approach was not higher than that in a grazing diet. Cheeses from groups P and L contained a higher value of FA, with nutritional implications for humans, when compared with un-supplemented diet. Linseed may be a good feeding strategy when pasture is not available.

Enteric Methane Emissions of Dairy Cows Predicted from Fatty Acid Profiles of Milk, Cream, Cheese, Ricotta, Whey, and Scotta

Enteric methane emissions (EME) of ruminants contribute to global climate change, but any attempt to reduce it will need an easy, inexpensive, and accurate method of quantification. We used a promising indirect method for estimating EMEs of lactating dairy cows based on the analysis of the fatty acid (FA) profile of their milk. The aim of this preliminary study was to assess milk from four single samplings (morning whole, evening whole, evening partially skimmed, and vat milks) as alternatives to reference whole milk samples from two milkings. Three fresh products (cream, cheese, and ricotta), two by-products (whey and scotta), and two long-ripened cheeses (6 and 12 months) were also assessed as alternative sources of information to reference milk. The 11 alternative matrices were obtained from seven experimental cheese- and ricotta-making sessions carried out every two weeks following the artisanal Malga cheese-making procedure using milk from 148 dairy cows kept on summer highland pastures. A total of 131 samples of milk, dairy products, and by-products were analyzed to determine the milk composition and to obtain detailed FA profiles using bi-dimensional gas-chromatography. Two equations taken from a published meta-analysis of methane emissions measured in the respiration chambers of cows on 30 different diets were applied to the proportions of butyric, iso-palmitic, iso-oleic, vaccenic, oleic, and linoleic acids out of total FAs to predict methane yield per kg of dry matter ingested and methane intensity per kg of fat and protein corrected milk produced by the cows. Methane yield and intensity could be predicted from single milk samples with good accuracy (trueness and precision) with respect to those predicted from reference milk. The fresh products (cream, cheese and ricotta) generally showed good levels of trueness but low precision for predicting both EME traits, which means that a greater number of samples needs to be analyzed. Among by-products, whey could be a viable alternative source of information for predicting both EME traits, whereas scotta overestimated both traits and showed low precision (due also to its very low fat content). Long-ripened cheeses were found to be less valuable sources of information, although six-month cheese could, with specific correction factors, be acceptable sources of information for predicting the methane yield of lactating cows. These preliminary results need to be confirmed by further study on different dairy systems and cheese-making technologies but offer new insight into a possible easy method for monitoring the EME at the field level along the dairy chain.

Chemometric authentication of farming systems of origin of food (milk and ripened cheese) using infrared spectra, fatty acid profiles, flavor fingerprints, and sensory descriptions

Milk samples from 1264 cows in 85 farms were authenticated for different farming-systems using a 10-fold cross-validated linear-discriminant-analysis using Fourier-transform infrared spectra (FTIRS) and gas-chromatographic fatty-acid (FA) profiles. FTIRS gave correct classification greater than FAs (97.4% vs. 81.1%) during calibration, but slightly worse in validation (73.5% vs 77.3%) and their combination improved the results. All milk samples were processed into ripened model-cheeses, and analyzed by near-infrared-spectrometry (NIRS), by proton-transfer-reaction time-of-flight mass-spectrometry for their volatile organic compound (VOCs) fingerprint and by panel sensory profiling (SENS). Farming-system authentication on cheese samples was less efficient than on milk, but still possible. The instrumental methods yielded similar validation results, better than SENS, and their combination improved the correct classification rate. The efficiency of the different technics was affected by specific farming systems. In conclusion, dairy products could be discriminated for farming-systems with acceptable accuracy, but the methods tested differ in sampling procedure, rapidity and costs.

Effects of Summer Transhumance of Dairy Cows to Alpine Pastures on Body Condition, Milk Yield and Composition, and Cheese Making Efficiency

Simple Summary

Summer transhumance of dairy cows is a seasonal pastoral system practiced in many European countries from ancient times. This practice provides additional forage supply for mountain dairy farms and plays a role in the preservation of landscape, biodiversity, and natural habitats and conservation of local traditional dairy products, but it may affect cows’ physiological and nutritional status. This study aimed to investigate the effects of transhumance of Brown Swiss cows to summer pastures on the yield, composition, and coagulation properties of milk, and on cheese yield. For this study, twelve multiparous cows from a mountain lowland permanent farm were divided into two groups of six cows: One group stayed at the permanent farm while the other moved to the alpine pasture (1860 m above sea level). Cows at the alpine pasture had reduced milk yield and body condition, and greater fat and lower protein contents in milk compared to cows at the permanent farm. Conversely, neither milk coagulation properties nor cheese yield were affected by summer transhumance. In conclusion, summer transhumance did not affect the cheese making efficiency of milk compared to permanent farm, but the negative effect on milk yield depressed daily cheese yield, which was 2 kg/d lower in cows moved to Alpine pasture.

Abstract

Summer transhumance to alpine pastures (ALP) is widespread in dairy systems of alpine regions. This study aimed to investigate the effects of transhumance of Brown Swiss cows to ALP on the yield, composition, and coagulation properties of milk (MCP), and on cheese yield (CY). The study involved 12 multiparous cows kept at a mountain lowland permanent farm (PF), which were divided into two equal groups: One remained at the PF, the other was moved to the ALP (1860 m above sea level) from July to September. Every month (June to October), daily milk yield (MY) and body condition score (BCS) were recorded, and individual milk samples (n = 60, 2000 mL each) were collected to assess milk composition, MCP, and CY. Compared with PF, ALP cows had a reduced MY and BCS, which was maintained on return to the PF, greater fat and lower protein contents of milk. Neither MCP nor CY were affected by summer transhumance. In conclusion, summer transhumance did not affect the cheese making efficiency of milk but depressed MY and consequently daily cheese yield, which was nearly 2 kg/d lower for the ALP than the PF cows and was only partially recovered after returning to the PF in autumn.

RESEARCH OF ORGANOLEPTIC PARAMETERS OF DUTCH CHEESE, PRODUCED FROM MILK OF COWS OF DIFFERENT BREEDS

The aim of this research is to study an influence of types of different breeds of milk cows on organoleptic properties of Dutch cheese at different rations of their food. It allows to receive cheese with prognosticated quality characteristics and to manage marketing strategies at cheese realization. The work presents the results of studying organoleptic properties of Dutch cheese, produced of milk of cows of different breeds, traditionally bred in the Northern-Eastern region of Ukraine. For studying an influence of cows feeding on exclusive properties of hard cheese, traditional food rations of cows were added with forages of a silage-hay type with Lucerne as a main source of proteins (44 % of the daily norm). Rations were practically identical with traditional ones by the content of energy and main food value factors and in general corresponded to norms of cows feeding. It has been demonstrated, that the high mark of cheese, up to 45 points for the taste and smell and total point mark 99 of 100 possible was obtained as a result of changing food rations at the expanse of introducing Lucerne silage in them. The data on optimization of food rations of certain cow breeds allow managing quality characteristics of milk and products of and are expedient for making cheese with unique regional characteristics. At conducting the comparative organoleptic assessment, there has been revealed a distinct dependence between a point mark of quality parameters of cheese on a breed of milk cows, and also on food rations of them. At the silage-hay food ration of animals, the received Dutch cheese had higher quality characteristics after 60 days of storage than cheese samples, obtained of cow milk at the traditional food ration.

STUDY OF INFLUENCE OF CALCIUM CONTENT IN MILK ON QUALITY INDICATORS OF COTTAGE CHEESE

The analysis was realized, and the dependence between the calcium content and organoleptic and functional-technological properties of milk as a raw material for producing sour milk cheese was determined. It was demonstrated, that alongside with other factors, the important role in milk clotting belongs to calcium, which role is in binding of free OH-groups of phosphoric acid of casein micelles. As a result of the aforesaid, their negative charge and colloid stability decrease with further hydrophilicity decrease with further aggregation of casein molecules. It was established, that the excessive content of calcium in milk is negative that is manifested in formation of the dry and brittle consistence of sour milk cheese. There was offered the way of calcium content regulation in milk by its decalcification using the natural sorbent of sodium alginate. Regulation of the milk salt system, especially, the calcium content as an initial raw material for producing sour milk cheese by the change of the content and condition of calcium allowed to correct parameters of the process of sour milk cheese making and its functional-technological properties, especially, moisture-keeping ability, form stability and other. It was established, that the decrease of the calcium content in milk provides getting sour milk cheese with the soft, easily smearing consistence, without whey separation. The obtained data on the characteristic of organoleptic indicators fully correlate with studies of the microstructure and dispersity of sour milk cheese. It was determined, that milk decalcification results in raising dispersity of sour milk cheese at the synchronous increase of the percent content of protein particles with minimal size characteristics in the system. It was elucidated, that the microstructure of studied samples consists of protein grains of the same form, evenly distributed by the whole volume. Based on the obtained experimental data, there were corrected parameters of the technological process of sour milk cheese production. There were elaborated ways of formation of the culinary products assortment on the base of sour milk cheese, produced of decalcified milk.

Detailed fatty acid profile of milk, cheese, ricotta and by products, from cows grazing summer highland pastures

In this research two-dimensional GC was used to analyse, for the first time, the detailed fatty acid (FA) profiles of 11 dairy matrices: raw milk (evening whole, evening partially skimmed, morning whole, and vat milk), cream, fresh cheese, whey, ricotta, scotta, 6- and 12-month-ripened cheeses, obtained across artisanal cheese- and ricotta-making trials carried out during the summer period while cows were on highland pastures. Samples were collected during 7 cheese- and ricotta-making procedures carried out at 2-week intervals from bulk milk to study possible differences in the transfer and modification of FA. Compared with morning milk, evening milk had fewer de novo synthetised FA. The detailed FA profile of partially skimmed milk differed little from that of evening whole milk before skimming, but the cream obtained differed from partially skimmed milk and from fresh cheese in about half the FA, due mainly to higher contents of all de novo FA, and lower contents of n-3 and n-6 FA. Fresh cheese and whey had similar FA profiles. The ricotta manufacturing process affected the partition of FA between ricotta and scotta, the FA profile of the latter differing in terms of groups and individual FA from the former, whereas ricotta and fresh cheese had similar composition of FA. In general, there was an increase in medium-chain saturated FA, and a decrease in many polyunsaturated FA during the first 6 months of ripening, but not during the second 6 months. Two-dimensional GC yielded a very detailed and informative FA profile on all the 11 dairy products and by-products analysed.