Application of shock waves as a treatment modality in the vicinity of the brain and skull

Low-energy extracorporeal shock wave therapy promotes BDNF expression and improves functional recovery after spinal cord injury in rats

Low-energy extracorporeal shock wave therapy (ESWT) has been used to treat various human diseases. Previous studies have shown that low-energy ESWT promotes the release of various cell growth factors and trophic factors from the cells surrounding the target lesion. The aim of the current study was to determine whether the application of low-energy ESWT upregulates the expression of brain-derived neurotrophic factor (BDNF) and reduces neural tissue damage and functional impairment using a rat model of thoracic spinal cord contusion injury. We found that low-energy ESWT promoted BDNF expression in the damaged neural tissue. The expression of BDNF was increased in various neural cells at the lesion. Additionally, low-energy ESWT increased the area of spared white matter and the number of oligodendrocytes in the injured spinal cord compared with untreated control animals. There were more axonal fibers around the injured site after the application of low-energy ESWT than control. Importantly, low-energy ESWT improved the locomotor functions evaluated by both the BBB scale and ladder rung walking test in addition to the sensory function measured using a von Frey test. Moreover, the electrophysiological assessment confirmed that the conductivity of the central motor pathway in the injured spinal cord was restored by low-energy ESWT. These findings indicate that low-energy ESWT promotes BDNF expression at the lesion site and reduces the neural tissue damage and functional impairment following spinal cord injury. Our results support the potential application of low-energy ESWT as a novel therapeutic strategy for treating spinal cord injury.

Mechanisms of primary blast-induced traumatic brain injury: insights from shock-wave research

Traumatic brain injury caused by explosive or blast events is traditionally divided into four phases: primary, secondary, tertiary, and quaternary blast injury. These phases of blast-induced traumatic brain injury (bTBI) are biomechanically distinct and can be modeled in both in vivo and in vitro systems. The primary bTBI injury phase represents the response of brain tissue to the initial blast wave. Among the four phases of bTBI, there is a remarkable paucity of information about the cause of primary bTBI. On the other hand, 30 years of research on the medical application of shockwaves (SW) has given us insight into the mechanisms of tissue and cellular damage in bTBI, including both air-mediated and underwater SW sources. From a basic physics perspective, the typical blast wave consists of a lead SW followed by supersonic flow. The resultant tissue injury includes several features observed in bTBI, such as hemorrhage, edema, pseudoaneurysm formation, vasoconstriction, and induction of apoptosis. These are well-described pathological findings within the SW literature. Acoustic impedance mismatch, penetration of tissue by shock/bubble interaction, geometry of the skull, shear stress, tensile stress, and subsequent cavitation formation, are all important factors in determining the extent of SW-induced tissue and cellular injury. Herein we describe the requirements for the adequate experimental set-up when investigating blast-induced tissue and cellular injury; review SW physics, research, and the importance of engineering validation (visualization/pressure measurement/numerical simulation); and, based upon our findings of SW-induced injury, discuss the potential underlying mechanisms of primary bTBI.

Pulsed laser-induced liquid jet for skull base tumor removal with vascular preservation through the transsphenoidal approach: a clinical investigation

BACKGROUND

The transsphenoidal approach has recently been used to treat complex lesions beyond the sella turcica, but the difficulties of dealing with small vessels, deep and narrow space, and working angle may limit the procedures. To overcome these problems, we have developed a pulsed laser-induced liquid jet (LILJ) system to dissect tumor tissue with preservation of fine blood vessels within deep and narrow working spaces and evaluated its utility and safety.

METHODS

The LILJ system was applied to 14 consecutive patients with uncharacteristically complex skull base tumor treated through the extended transsphenoidal approach. This system consists of a bayonet-shaped catheter incorporating a jet generator formed of stainless tube (external diameter 1.10 mm, internal diameter 0.78 mm), which was surrounded by a coaxial polytetrafluoroethylene 14-G equivalent suction tube to be able to incorporate into the confined working spaces. Minor modifications could be fitted for the catheter (15 to 18 cm length, straight or side flexion tip), and total weight was around 7 g.

FINDINGS

Precise dissection and mass reduction of the tumor were obtained in all cases except one recurrent case of chordoma with significant fibrosis due to radiation. Both small arteries and veins were preserved, allowing subsequent microsurgical devascularization. Intraoperative blood loss was minimal, and tumor removal rate was satisfactory after the introduction of the system. No complication was related to use of the LILJ system.

CONCLUSION

Although comparison between conventional surgical instruments is mandatory in the future, the present study suggests that the LILJ system can achieve safe and optimum removal of complex skull base tumor. Potential application for minimally invasive endoscopic system, as well as potentials for changing the design of the catheter in according to preference of surgeon with low cost, may give advantages over conventional surgical instruments.

Morphological changes of the neural cells after blast injury of spinal cord and neuroprotective effects of sodium beta-aescinate in rabbits

OBJECTIVE

Explosive blast neurotrauma is becoming more and more common not only in the military population but also in civilian life due to the ever-present threat of terrorism and accidents. However, little attention has been offered to the studies associated with blast wave-induced spinal cord injury in the literatures. The purpose of this study is to report a rabbit model of explosive blast injury to the spinal cord, to investigate the histological changes, focusing especially on apoptosis, and to reveal whether beta-aescinate (SA) has the neuroprotective effects against the blast injury.

METHODS

Adult male New Zealand white rabbits were randomly divided into sham group, experimental group and SA group. All rabbits except the sham group were exposed to the detonation, produced by the blast tube containing 0.7 g cyclotrimethylene trinitramine, with the mean peak overpressure of 50.4 MP focused on the dorsal surface of T9-T10 level. After evaluation of the neurologic function, spinal cord of the rabbits was removed at 8 h, 1, 3, 7, 14 or 30 days and the H&E staining, EM examination, DNA gel electrophoresis and TUNEL were progressively performed.

RESULTS

The study demonstrated the occurrence of both necrosis and apoptosis at the lesion site. Moreover, the SA therapy could not only improve the neurologic outcomes (P<0.05) but also reduce the loss of motoneuron and TUNEL-positive rate (P<0.05).

CONCLUSIONS

In the rabbit model of explosive blast injury to the spinal cord, the coexistent apoptotic and necrotic changes in cells was confirmed and the SA had neuroprotective effects to the blast injury of the spinal cord in rabbits. This is the first report in which the histological characteristics and drug treatment of the blast injury to the spinal cord is demonstrated.

Shock wave-induced brain injury in rat: novel traumatic brain injury animal model

BACKGROUND

In blast wave injury and high-energy traumatic brain injury, shock waves (SW) play an important role along with cavitation phenomena. However, due to lack of reliable and reproducible technical approaches, extensive study of this type of injury has not yet been reported. The present study aims to develop reliable SW-induced brain injury model by focusing micro-explosion generated SW in the rat brain.

METHODS

Adult male rats were exposed to single SW focusing created by detonation of microgram order of silver azide crystals with laser irradiation at a focal point of a truncated ellipsoidal cavity of20 mm minor diameter and the major to minor diameter ratio of 1.41 after craniotomy. The pressure profile was recorded using polyvinylidene fluoride needle hydrophone. Animals were divided into three groups according to the given overpressure: Group I: Control, Group II: 12.5 +/- 2.5 MPa (high pressure), and Group III: 1.0 +/- 0.2 MPa (low pressure). Histological changes were evaluated over time by hematoxylin-eosin staining.

FINDINGS

Group II SW injuries resulted in contusional hemorrhage in reproducible manner. Group III exposure resulted in spindle-shaped changes of neurons and elongation of nucleus without marked neuronal injury.

CONCLUSIONS

The use of SW loading by micro-explosion is useful to provide a reliable and reproducible SW-induced brain injury model in rats.

Pressure-dependent effect of shock waves on rat brain: induction of neuronal apoptosis mediated by a caspase-dependent pathway

OBJECT

Shock waves have been experimentally applied to various neurosurgical treatments including fragmentation of cerebral emboli, perforation of cyst walls or tissue, and delivery of drugs into cells. Nevertheless, the application of shock waves to clinical neurosurgery remains challenging because the threshold for shock wave-induced brain injury has not been determined. The authors investigated the pressure-dependent effect of shock waves on histological changes of rat brain, focusing especially on apoptosis.

METHODS

Adult male rats were exposed to a single shot of shock waves (produced by silver azide explosion) at overpressures of 1 or 10 MPa after craniotomy. Histological changes were evaluated sequentially by H & E staining and terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate nick-end labeling (TUNEL). The expression of active caspase-3 and the effect of the nonselective caspase inhibitor N-benzyloxycarbonyl-Val-Ala-Asp-fluoromethylketone (Z-VAD-FMK) were examined to evaluate the contribution of a caspase-dependent pathway to shock wave-induced brain injury. High-overpressure (> 10 MPa) shock wave exposure resulted in contusional hemorrhage associated with a significant increase in TUNEL-positive neurons exhibiting chromatin condensation, nuclear segmentation, and apoptotic bodies. The maximum increase was seen at 24 hours after shock wave application. Low-overpressure (1 MPa) shock wave exposure resulted in spindle-shaped changes in neurons and elongation of nuclei without marked neuronal injury. The administration of Z-VAD-FMK significantly reduced the number of TUNEL-positive cells observed 24 hours after high-overpressure shock wave exposure (p < 0.01). A significant increase in the cytosolic expression of active caspase-3 was evident 24 hours after high-overpressure shock wave application; this increase was prevented by Z-VAD-FMK administration. Double immunofluorescence staining showed that TUNEL-positive cells were exclusively neurons.

CONCLUSIONS

The threshold for shock wave-induced brain injury is speculated to be under 1 MPa, a level that is lower than the threshold for other organs. High-overpressure shock wave exposure results in brain injury, including neuronal apoptosis mediated by a caspase-dependent pathway. This is the first report in which the pressure-dependent effect of shock wave on the histological characteristics of brain tissue is demonstrated.

Pulsed holmium:yttrium-aluminum-garnet laser-induced liquid jet as a novel dissection device in neuroendoscopic surgery

OBJECT

A pressure-driven continuous jet of water has been reported to be a feasible tool for neuroendoscopic dissection owing to its superiority at selective tissue dissection in the absence of thermal effects. With respect to a safe, accurate dissection, however, continuous water flow may not be suitable for intraventricular use. The authors performed experiments aimed at solving problems associated with continuous flow by using a pulsed holmium:yttrium-aluminum-garnet (Ho:YAG) laser-induced liquid jet (LILJ). They present this candidate neuroendoscopic LILJ dissection system, having examined its mechanical characteristics and evaluated its controllability both in a tissue phantom and in a rabbit cadaveric ventricle wall.

METHODS

The LILJ generator was incorporated into the tip of a No. 4 French catheter so that the LILJ could be delivered via a neuroendoscope. Briefly, the LILJ was generated by irradiating an internally supplied column of physiological saline with a pulsed Ho:YAG laser (pulse duration time 350 microsec; laser energy 250-700 mJ/pulse) within a No. 4 French catheter (internal diameter 1 mm) and ejecting it from a metal nozzle (internal diameter 100 microm). The Ho:YAG laser energy pulses were conveyed by an optical fiber (core diameter 400 microm) at 3 Hz, whereas physiological saline (4 degrees C) was supplied at a rate of 40 ml/hour. The mechanical characteristics of the pulsed LILJ were investigated using high-speed photography and pressure measurements; thermal effects and controllability were analyzed using an artificial tissue model (10% gelatin of 1 mm thickness). Finally, the ventricle wall of a rabbit cadaver was dissected using the LILJ. Jet pressure increased in accordance with laser energy from 0.1 to 2 bar; this translated into a penetration depth of 0.08 to 0.9 mm per shot in the ventricle wall of the rabbit cadaver. The gelatin phantom could be cut into the desired shape without significant thermal effects and in the intended manner, with a good surgical view.

CONCLUSIONS

The present results show that the pulsed LILJ has the potential to become a safe and reliable dissecting method for endoscopic procedures.

Experimental application of pulsed Ho:YAG laser-induced liquid jet as a novel rigid neuroendoscopic dissection device

BACKGROUND AND OBJECTIVES

Although water jet technology has been considered as a feasible neuroendoscopic dissection methodology because of its ability to perform selective tissue dissection without thermal damage, problems associated with continuous use of water and the ensuing fountain-effect-with catapulting of the tissue-could make water jets unsuitable for endoscopic use, in terms of safety and ease of handling. Therefore, the authors experimented with minimization of water usage during the application of a pulsed holmium:yttrium-aluminum-garnet (Ho:YAG) laser-induced liquid jet (LILJ), while assuring the dissection quality and the controllability of a conventional water jet dissection device. We have developed the LILJ generator for use as a rigid neuroendoscope, discerned its mechanical behavior, and evaluated its dissection ability using the cadaveric rabbit ventricular wall.

STUDY DESIGN/MATERIALS AND METHODS

The LILJ generator is incorporated into the tip of a stainless steel tube (length: 22 cm; internal diameter: 1.0 mm; external diameter: 1.4 mm), so that the device can be inserted into a commercial, rigid neuroendoscope. Briefly, the LILJ is generated by irradiating an internally supplied water column within the stainless steel tube using the pulsed Ho:YAG laser (wave length: 2.1 microm, pulse duration time: 350 microseconds) and is then ejected through the metal nozzle (internal diameter: 100 microm). The Ho:YAG laser pulse energy is conveyed through optical quartz fiber (core diameter: 400 microm), while cold water (5 degrees C) is internally supplied at a rate of 40 ml/hour. The relationship between laser energy (range: 40-433 mJ/pulse), standoff distance (defined as the distance between the tip of the optical fiber and the nozzle end; range: 10-30 mm), and the velocity, shape, pressure, and average volume of the ejected jet were analyzed by means of high-speed camera, PVDF needle hydrophone, and digital scale. The quality of the dissection plane, the preservation of blood vessels, and the penetration depth were evaluated using five fresh cadaveric rabbit ventricular walls, under neuroendoscopic vision.

RESULTS

Jet velocity (7.0-19.6 m/second) and pressure (0.07-0.28 MPa) could be controlled by varying the laser energy, which determined the penetration depth in the cadaveric rabbit ventricular wall (0.07-1.30 mm/shot). The latter could be cut into desirable shapes-without thermal effects-under clear neuroendoscopic vision. The average volume of a single ejected jet could be confined to 0.42-1.52 microl/shot, and there was no accompanying generation of shock waves. Histological specimens revealed a sharp dissection plane and demonstrated that blood vessels of diameter over 100 microm could be preserved, without thermal damage.

CONCLUSIONS

The present pulsed LILJ system holds promise as a safe and reliable dissection device for deployment in a rigid neuroendoscope.