Reuse of Immobilized Weissella cibaria PN3 for Long-Term Production of Both Extracellular and Cell-Bound Glycolipid Biosurfactants

Unveiling the origin, fate, and remedial approaches for surfactants in sewage-fed foaming urban (Bellandur) Lake

Foam formation in surface water bodies has become a global phenomenon, but the solutions to this crisis are often insufficient. Foam formation in water bodies is attributed to surfactants and requires a comprehensive assessment of various sources of surfactants to evolve mitigation strategies. The study is focused on thoroughly analyzing surfactants in the water and foam fractions of a large waterbody in Bangalore (India) spanning around 1000 acres (400 ha), which has been foaming for two decades. Results revealed that the key surfactants originate predominantly from anthropogenic sources with a small component emerging from naturogenic sources. Anthropogenic surfactants were found to be predominant (96.5%), with linear alkylbenzene sulphonates (LAS) of various C-chain lengths 12-20 being the most prevalent. Naturogenic surfactants derived from bacterial genera Pseudomonas exhibited significant microbial diversity, accounting for over 19% of total bacterial population in both the water and organic sediments of the lake. Modelling studies and field validation efforts were carried out to understand the fate of LAS in the foaming lake. The results indicated that these surfactants donot degrade under the prevailing conditions and timeframe as wastewater traverses through the lake, and their presence was also observed in the organic sludge sediment. Modeling the underlying processes revealed that a minimum dissolved oxygen (DO) concentration of 3.5 mg/l enables the degradation of over 90% of surfactants within the residence time of 8-10 days in Lake. Additionally, the process of desludging could contribute to an additional increase to the overall efficiency of surfactant removal, simultaneously removing legacy sorbed surfactants to sediments.

Copper and chromium removal from industrial sludge by a biosurfactant-based washing agent and subsequent recovery by iron oxide nanoparticles

Industrial wastewater treatment generates sludge with high concentrations of metals and coagulants, which can cause environmental problems. This study developed a sequential sludge washing and metal recovery process for industrial sludge containing > 4500 mg/kg Cu and > 5000 mg/kg Cr. The washing agent was formulated by mixing glycolipid, lipopeptide, and phospholipid biosurfactants from Weissella cibaria PN3 and Brevibacterium casei NK8 with a chelating agent, ethylenediaminetetraacetic acid (EDTA). These biosurfactants contained various functional groups for capturing metals. The optimized formulation by the central composite design had low surface tension and contained relatively small micelles. Comparable Cu and Cr removal efficiencies of 37.8% and 38.4%, respectively, were obtained after washing the sludge by shaking with a sonication process at a 1:4 solid-to-liquid ratio. The zeta potential analysis indicated the bonding of metal ions on the surface of biosurfactant micelles. When 100 g/L iron oxide nanoparticles were applied to the washing agent without pH adjustment, 83% Cu and 100% Cr were recovered. In addition, X-ray diffraction and X-ray absorption spectroscopy of the nanoparticles showed the oxidation of nanoparticles, the reduction of Cr(V) to the less toxic Cr(III), and the absorption of Cu. The recovered metals could be further recycled, which will be beneficial for the circular economy.

Antibiofilm Activity of Weissella spp. and Bacillus coagulans Isolated from Equine Skin against Staphylococcus aureus

The aim of this study was to evaluate the antimicrobial and antibiofilm activity of Weissella cibaria, Weissella hellenica and Bacillus coagulans, isolated from equine skin, against biofilm-forming Staphylococcus aureus CCM 4223 and clinical isolate methicillin-resistant S. aureus (MRSA). Non-neutralized cell-free supernatants (nnCFS) of tested skin isolates completely inhibited the growth and biofilm formation of S. aureus strains and caused dispersion of the 24 h preformed biofilm in the range of 21-90%. The majority of the pH-neutralized cell-free supernatants (nCFS) of skin isolates inhibited the biofilm formation of both S. aureus strains in the range of 20-100%. The dispersion activity of B. coagulans nCFS ranged from 17 to 77% and was significantly lower than that of nnCFS, except for B. coagulans 3T27 against S. aureus CCM 4223. Changes in the growth of S. aureus CCM 4223 in the presence of catalase- or trypsin-treated W. hellenica 4/2D23 and W. cibaria 4/8D37 nCFS indicated the role of peroxides and/or bacteriocin in their antimicrobial activities. For the first time, the presence of the fenD gene, associated with biosurfactants production, was detected in B. coagulans. The results of this study showed that selected isolates may have the potential for the prevention and treatment of biofilm-forming S. aureus infections.

Formulation of a glycolipid:lipopeptide mixture as biosurfactant-based dispersant and development of a low-cost glycolipid production process

Biosurfactant-based dispersants were formulated by mixing glycolipids from Weissella cibaria PN3 and lipopeptides from Bacillus subtilis GY19 to enhance the synergistic effect and thereby achieve hydrophilic-lipophilic balance. The proportions of each biosurfactant and dispersant-to-oil ratios (DORs) were varied to obtain the appropriated formulations. The most efficient glycolipid:lipopeptide mixtures (F1 and F2) had oil displacement activities of 81–88% for fuel and crude oils. The baffled flask test of these formulations showed 77–79% dispersion effectiveness at a DOR of 1:25. To reduce the cost of the dispersant, this study optimized the glycolipid production process by using immobilized cells in a stirred tank fermenter. Semicontinuous glycolipid production was carried out conveniently for 3 cycles. Moreover, food wastes, including waste coconut water and waste frying oil, were found to promote glycolipid production. Glycolipids from the optimized process and substrates had similar characteristics but 20–50% lower cost than those produced from basal medium with soybean oil in shaking flasks. The lowest cost dispersant formulation (F2*) contained 10 g/L waste-derived cell-bound glycolipid and 10 g/L lipopeptide and showed high dispersion efficiency with various oils. Therefore, this biosurfactant-based dispersant could be produced on a larger scale for further application.