Subject-Specific Modeling of Femoral Torsion Influences the Prediction of Hip Loading During Gait in Asymptomatic Adults

Hip contact force pathways in total hip replacement differ between patients and activities of daily living

One of the main causes of implant failure and revision surgery in total hip replacement (THR) is aseptic loosening often caused by the accumulation of wear debris arising between the contact surfaces of the acetabular cup and femoral head during activities of daily living (ADL's). However, limited information is available regarding the contact force pathways between these two surfaces during specific ADL's. In this study, through musculoskeletal modelling, we aimed to estimate the orientation of the hip contact force pathway on the acetabular cup. One hundred and thirty-two THR patients underwent motion capture analysis whilst undertaking locomotor and non-locomotor ADL's. Musculoskeletal simulations were performed to calculate contact force pathways using inverse dynamics analysis. We then qualitatively compared differences in the contact force pathways between patients and between ADL's. Walking resulted in a typical figure-of-eight pattern, with the peak contact forces occurring in the superior-anterior area of the cup. The non-locomotive activities such as stand up, sit down and squat had a more linear shape, spanning across the superior-posterior quarter of the cup. Our results showed a large inter-patient variability in the shape and location of the contact force pathway. There is a distinct difference in the location and shape of the pathway between locomotor and non-locomotor activities and this could result in different wear accumulations. These results could enhance our understanding why revision rates vary across the population and could inform the development of personalised implant design.

Musculoskeletal modeling and movement simulation for structural hip disorder research: A scoping review of methods, validation, and applications

Musculoskeletal modeling is a powerful tool to quantify biomechanical factors typically not feasible to measure in vivo, such as hip contact forces and deep muscle activations. While technological advancements in musculoskeletal modeling have increased accessibility, selecting the appropriate modeling approach for a specific research question, particularly when investigating pathological populations, has become more challenging. The purposes of this review were to summarize current modeling and simulation methods in structural hip disorder research, as well as evaluate model validation and study reproducibility. MEDLINE and Web of Science were searched to identify literature relating to the use of musculoskeletal models to investigate structural hip disorders (i.e., involving a bony abnormality of the pelvis, femur, or both). Forty-seven articles were included for analysis, which either compared multiple modeling methods or applied a single modeling workflow to answer a research question. Findings from studies comparing methods were summarized, such as the effect of generic versus patient-specific modeling techniques on model-estimated hip contact forces or muscle forces. The review also discussed limitations in validation practices, as only 11 of the included studies conducted a validation and used qualitative approaches only. Given the lack of information related to model validation, additional details regarding the development and validation of generic models were retrieved from references and modeling software documentation. To address the wide variability and under-reporting of data collection, data processing, and modeling methods highlighted in this review, we developed a template that researchers can complete and include as a table within the methodology section of their manuscripts. The use of this table will help increase transparency and reporting of essential details related to reproducibility and methods without being limited by word count restrictions. Overall, this review provides a comprehensive synthesis of modeling approaches that can help researchers make modeling decisions and evaluate existing literature.

Understanding the role of head size and neck length in micromotion generation at the taper junction in total hip arthroplasty

Modular hip implants allow intra-operative adjustments for patient-specific customization and targeted replacement of damaged elements without full implant extraction. However, challenges arise from relative micromotions between components, potentially leading to implant failure due to cytotoxic metal debris. In this study magnitude and directions of micromotions at the taper junction were estimated, aiming to understand the effect of variations in head size and neck length. Starting from a reference configuration adhering to the 12/14 taper standard, six additional implant configurations were generated by varying the head size and/or neck length. A musculoskeletal multibody model of a prothesized lower limb was developed to estimate hip contact force and location during a normal walking task. Following the implant assembly, the multibody-derived loads were imposed as boundary conditions in a finite element analysis to compute the taper junction micromotions as the relative slip between the contacting surfaces. Results highlighted the L-size head as the most critical configuration, indicating a 2.81 μm relative slip at the mid-stance phase. The proposed approach enables the investigation of geometric variations in implants under accurate load conditions, providing valuable insights for designing less risky prostheses and informing clinical decision-making processes.

Prediction of ground reaction forces and moments during walking in children with cerebral palsy

Introduction

Gait analysis is increasingly used to support clinical decision-making regarding diagnosis and treatment planning for movement disorders. As a key part of gait analysis, inverse dynamics can be applied to estimate internal loading conditions during movement, which is essential for understanding pathological gait patterns. The inverse dynamics calculation uses external kinetic information, normally collected using force plates. However, collection of external ground reaction forces (GRFs) and moments (GRMs) can be challenging, especially in subjects with movement disorders. In recent years, a musculoskeletal modeling-based approach has been developed to predict external kinetics from kinematic data, but its performance has not yet been evaluated for altered locomotor patterns such as toe-walking. Therefore, the goal of this study was to investigate how well this prediction method performs for gait in children with cerebral palsy.

Methods

The method was applied to 25 subjects with various forms of hemiplegic spastic locomotor patterns. Predicted GRFs and GRMs, in addition to associated joint kinetics derived using inverse dynamics, were statistically compared against those based on force plate measurements.

Results

The results showed that the performance of the predictive method was similar for the affected and unaffected limbs, with Pearson correlation coefficients between predicted and measured GRFs of 0.71–0.96, similar to those previously reported for healthy adults, despite the motor pathology and the inclusion of toes-walkers within our cohort. However, errors were amplified when calculating the resulting joint moments to an extent that could influence clinical interpretation.

Conclusion

To conclude, the musculoskeletal modeling-based approach for estimating external kinetics is promising for pathological gait, offering the possibility of estimating GRFs and GRMs without the need for force plate data. However, further development is needed before implementation within clinical settings becomes possible.

High tibial osteotomy effectively redistributes compressive knee loads during walking

The objectives of this study were to estimate pre- and postoperative lower limb kinematics and kinetics and knee intra-articular forces during gait using musculoskeletal modeling in a cohort of patients with knee osteoarthritis (OA) undergoing high tibial osteotomy (HTO), compare these to controls, and determine correlations between changes in these parameters and Knee Injury and Osteoarthritis Outcome Score (KOOS) subscores after HTO. Sixteen patients with isolated, symptomatic medial compartment knee OA completed pre- and postoperative gait analysis (mean follow-up time: 8.6 months). Sixteen age- and sex-matched asymptomatic volunteers participated as controls. Musculoskeletal modeling was used to evaluate lower limb joint moments and knee contact forces during gait. While HTO had limited influence on sagittal plane kinematics and moments, significant changes in the load distribution at the knee after HTO were observed with a lower postoperative compressive load on the medial compartment during midstance and a higher compressive load on the lateral compartment during early and late stance. Moreover, the lateral shear force in midstance was significantly lower after HTO. Changes in the external knee adduction moment (KAM) did not always coincide with reductions in the knee compressive force in the medial compartment. Biomechanical changes did not correlate with improvements in KOOS subscores. Hence, HTO effectively unloaded the medial compartment by redistributing part of the overall compressive force to the lateral compartment during gait with limited influence on gait function. The KAM may not adequately describe compartmental load magnitude or changes induced by interventions at the compartment level. Clinical trial registration: ClinicalTrials. gov Identifier-NCT02622204. Clinical significance: This study provides important evidence for changes in joint level loads after corrective osteotomy as joint preserving surgery and emphasizes the need for additional biomechanical outcomes of such interventions.

The functional role of hip muscles during gait in patients with increased femoral anteversion

BACKGROUND

Femoral anteversion affects the lever arm and moment-generating capacity of the hip abductors, while an increased hip internal rotation during walking was proposed to be a compensatory mechanism to restore the abductive lever arm. Children with isolated increased femoral anteversion, however, do not always present a deficit in the net hip abduction moment during gait, suggesting that a more comprehensive understanding of the effect of morphology and motion on muscle forces and moments is needed to aid clinical decision making.

RESEARCH QUESTION

Are muscle contributions to hip joint moments and muscle forces altered in patients with increased femoral anteversion and internally rotated gait pattern compared to a control group of typically developing children? And how would the functional role of the muscle be altered if the patients walked straight?

METHODS

This follow-up study compared patients with increased femoral anteversion (n = 42, 12.8 ± 1.9 years, femoral anteversion: 39.6 ± 6.9°) to controls (n = 9, 12.0 ± 3.0 years, femoral anteversion: 18.7 ± 4.1°). Muscle forces and moment contributions were calculated using personalized musculoskeletal models. Additionally, a hypothetical scenario, in which the gait of the controls was modelled with an anteverted femoral morphology, was used to understand what would happen if the patients walked straight.

RESULTS

Gluteus medius abductive contribution was lower in patients compared to controls, despite a comparable net abduction moment around the hip. Patients presented lower muscle forces. However, if modelled to walk straight, they would require higher forces as well as a larger co-contraction of both hip internal and external rotators in the transversal plane.

SIGNIFICANCE

This study suggests that patients with increased femoral anteversion walking with an internally rotated gait pattern present lower muscle forces, but when modelled to walk straight muscle forces increase. The current results provide important information to better understand this condition and improve treatment recommendations in these patients.

Reliability of the pelvis and femur anatomical landmarks and geometry with the EOS system before and after total hip arthroplasty

Bi-plane X-ray provides 3D measurements of the lower limb based on the identification of anatomical landmarks in sagittal and frontal X-rays. In clinical practice, such measurements involve multiple operators and sessions. This study aimed at evaluating the reliability of anatomical landmarks identification and geometric parameters of the pelvis and femur measured with bi-plane X-rays before and after total hip arthroplasty (THA). Twenty-eight patients undergoing primary THA were selected retrospectively. Two operators performed three reconstructions for each patient before and after THA. Intraclass correlation (ICC) and smallest detectable change (SDC) were computed for intra-operator, inter-operator, and test-retest conditions. Most anatomical landmark positions had good to excellent SDC (< 5 mm) apart from the centre of the sacral slope, greater trochanter, and anterior superior iliac spines (up to 7.1, 16.9, and 21.5 mm respectively). Geometric parameters had moderate to excellent SDC, apart from femoral and stem torsion, pelvic incidence, and APP inclination with poor SDC (9-12°). The sagittal view had significantly higher measurement errors than the frontal view. Test-retest and inter-operator conditions had no significant differences suggesting a low influence of patient posture. Osteoarthritis and the presence of implants did not seem to influence reliability and measurement error. This study could be used as a reference when assessing lower limb structure with bi-plane X-rays.

Neuromuscular Consequences of Lumbopelvic Dysfunction: Research and Clinical Perspectives

Injuries involving the lumbopelvic region (ie, lumbar spine, pelvis, hip) are common across the lifespan and include pathologies such as low back pain, femoroacetabular impingement syndrome, labrum tear, and osteoarthritis. Joint injury is known to result in an arthrogenic muscle response which contributes to muscle weakness and altered movement patterns. The purpose of this manuscript is to summarize the arthrogenic muscle response that occurs across lumbopelvic region pathologies, identify methods to quantify muscle function, and propose suggestions for future research. While each lumbopelvic region pathology is unique, there are a few common impairments and a relative consistent arthrogenic muscle response that occurs across the region. Hip muscle weakness and hip joint range of motion limitations occur with both lumbar spine and hip pathologies, and individuals with low back pain are known to demonstrate inhibition of the transversus abdominis and multifidus. Assessment of muscle inhibition is often limited to research laboratory settings, but dynamometers, ultrasound imaging, and electromyography offer clinical capacity to quantify muscle function and inform treatment pathways. Future studies should systematically determine the arthrogenic muscle response across multiple muscle groups and the timeline for changes in muscle function and determine whether disinhibitory modalities improve functional outcomes beyond traditional treatment approaches.

Increased Femoral Anteversion Does Not Lead to Increased Joint Forces During Gait in a Cohort of Adolescent Patients

Orthopedic complications were previously reported for patients with increased femoral anteversion. A more comprehensive analysis of the influence of increased femoral anteversion on joint loading in these patients is required to better understand the pathology and its clinical management. Therefore, the aim was to investigate lower-limb kinematics, joint moments and forces during gait in adolescent patients with increased, isolated femoral anteversion compared to typically developing controls. Secondly, relationships between the joint loads experienced by the patients and different morphological and kinematic features were investigated. Patients with increased femoral anteversion (n = 42, 12.8 ± 1.9 years, femoral anteversion: 39.6 ± 6.9°) were compared to typically developing controls (n = 9, 12.0 ± 3.0 years, femoral anteversion: 18.7 ± 4.1°). Hip and knee joint kinematics and kinetics were calculated using subject-specific musculoskeletal models. Differences between patients and controls in the investigated outcome variables (joint kinematics, moments, and forces) were evaluated through statistical parametric mapping with Hotelling T2 and t-tests (α = 0.05). Canonical correlation analyses (CCAs) and regression analyses were used to evaluate within the patients’ cohort the effect of different morphological and kinematic predictors on the outcome variables. Predicted compressive proximo-distal loads in both hip and knee joints were significantly reduced in patients compared to controls. A gait pattern characterized by increased knee flexion during terminal stance (KneeFlex_tSt) was significantly correlated with hip and knee forces, as well as with the resultant force exerted by the quadriceps on the patella. On the other hand, hip internal rotation and in-toeing, did not affect the loads in the joints. Based on the finding of the CCAs and linear regression analyses, patients were further divided into two subgroups based KneeFlex_tSt. Patients with excessive KneeFlex_tSt presented a significantly higher femoral anteversion than those with normal KneeFlex_tSt. Patients with excessive KneeFlex_tSt presented significantly larger quadriceps forces on the patella and a larger posteriorly-oriented shear force at the knee, compared to patients with normal KneeFlex_tSt, but both patients’ subgroups presented only limited differences in terms of joint loading compared to controls. This study showed that an altered femoral morphology does not necessarily lead to an increased risk of joint overloading, but instead patient-specific kinematics should be considered.

Altered Muscle Contributions are Required to Support the Stance Limb During Voluntary Toe-Walking

Toe-walking characterizes several neuromuscular conditions and is associated with a reduction in gait stability and efficiency, as well as in life quality. The optimal choice of treatment depends on a correct understanding of the underlying pathology and on the individual biomechanics of walking. The objective of this study was to describe gait deviations occurring in a cohort of healthy adult subjects when mimicking a unilateral toe-walking pattern compared to their normal heel-to-toe gait pattern. The focus was to characterize the functional adaptations of the major lower-limb muscles which are required in order to toe walk. Musculoskeletal modeling was used to estimate the required muscle contributions to the joint sagittal moments. The support moment, defined as the sum of the sagittal extensive moments at the ankle, knee, and hip joints, was used to evaluate the overall muscular effort necessary to maintain stance limb stability and prevent the collapse of the knee. Compared to a normal heel-to-toe gait pattern, toe-walking was characterized by significantly different lower-limb kinematics and kinetics. The altered kinetic demands at each joint translated into different necessary moment contributions from most muscles. In particular, an earlier and prolonged ankle plantarflexion contribution was required from the soleus and gastrocnemius during most of the stance phase. The hip extensors had to provide a higher extensive moment during loading response, while a significantly higher knee extension contribution from the vasti was necessary during mid-stance. Compensatory muscular activations are therefore functionally required at every joint level in order to toe walk. A higher support moment during toe-walking indicates an overall higher muscular effort necessary to maintain stance limb stability and prevent the collapse of the knee. Higher muscular demands during gait may lead to fatigue, pain, and reduced quality of life. Toe-walking is indeed associated with significantly larger muscle forces exerted by the quadriceps to the patella and prolonged force transmission through the Achilles tendon during stance phase. Optimal treatment options should therefore account for muscular demands and potential overloads associated with specific compensatory mechanisms.

Sensitivity of musculoskeletal models to variation in muscle architecture parameters

Musculoskeletal models, like all theoretical models of physical processes, depend on the assumptions needed to construct the model. For musculoskeletal models, these assumptions include, among other things, the kinematic data, the kinetic data and the muscle parameters. The former (dynamic) data can be acquired relatively easily from living subjects, but the latter are usually based on limited information, frequently determined from cadaver studies performed on elderly individuals. Previously, we determined the sensitivity of forces to dynamic differences among 10 humans walking on a straight path. Here, we assess the sensitivity of the muscle and joint reaction forces developed in human walking to variable muscle parameters obtained from 10 living adults, whose data were recently reported, and compared the results with the values from a standard model that depends on cadaveric data. We found that, while the force patterns across the stance cycle were similar among muscle parameter models, differences of as much as 15% in the force magnitude were produced. Whether or not the variation between the standard model and other muscle parameters is important depends on why the forces are required.