Recent Development of Mg Ion Solid Electrolyte

Influence of Residual Water Traces on the Electrochemical Performance of Hydrophobic Ionic Liquids for Magnesium-Containing Electrolytes

A trace amount of water is typically unavoidable as an impurity in ionic liquids, which is a huge challenge for their application in Mg-ion batteries. Here, we employed molecular sieves of different pore diameters (3, 4, and 5 Å), to effectively remove the trace amounts of water from 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPip-TFSI) and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMP-TFSI). Notably, after sieving (water content <1 mg ⋅ L-1 ), new anodic peaks arise that are attributed to the formation of different anion-cation structures induced by minimizing the influence of hydrogen bonds. Furthermore, electrochemical impedance spectroscopy (EIS) reveals that the electrolyte resistance decreases by ∼10 % for MPPip-TFSI and by ∼28 % for BMP-TFSI after sieving. The electrochemical Mg deposition/dissolution is investigated in MPPip-TFSI/tetraglyme (1 : 1)+100 mM Mg(TFSI)2 +10 mM Mg(BH4 )2 using Ag/AgCl and Mg reference electrodes. The presence of a trace amount of water leads to a considerable shift of 0.9 V vs. Mg2+/ Mg in the overpotential of Mg deposition. In contrast, drying of MPPip-TFSI enhances the reversibility of Mg deposition/dissolution and suppresses the passivation of the Mg electrode.

Next-generation magnesium-ion batteries: The quasi-solid-state approach to multivalent metal ion storage

Mg-ion batteries offer a safe, low-cost, and high-energy density alternative to current Li-ion batteries. However, nonaqueous Mg-ion batteries struggle with poor ionic conductivity, while aqueous batteries face a narrow electrochemical window. Our group previously developed a water-in-salt battery with an operating voltage above 2 V yet still lower than its nonaqueous counterpart because of the dominance of proton over Mg-ion insertion in the cathode. We designed a quasi-solid-state magnesium-ion battery (QSMB) that confines the hydrogen bond network for true multivalent metal ion storage. The QSMB demonstrates an energy density of 264 W·hour kg-1, nearly five times higher than aqueous Mg-ion batteries and a voltage plateau (2.6 to 2.0 V), outperforming other Mg-ion batteries. In addition, it retains 90% of its capacity after 900 cycles at subzero temperatures (-22°C). The QSMB leverages the advantages of aqueous and nonaqueous systems, offering an innovative approach to designing high-performing Mg-ion batteries and other multivalent metal ion batteries.

Divalent closo-monocarborane solvates for solid-state ionic conductors

Li-ion batteries have held the dominant position in battery research for the last 30+ years. However, due to inadequate resources and the cost of necessary elements (e.g., lithium ore) in addition to safety issues concerning the components and construction, it has become more important to look at alternative technologies. Multivalent metal batteries with solid-state electrolytes are a potential option for future battery applications. The synthesis and characterisation of divalent hydrated closo-monocarborane salts - Mg[CB₁₁H₁₂]₂·xH₂O, Ca[CB₁₁H₁₂]₂·xH₂O, and Zn[CB₁₁H₁₂]₂·xH₂O - have shown potential as solid-state electrolytes. The coordination of a solvent (e.g. H₂O) to the cation in these complexes shows a significant improvement in ionic conductivity, i.e. for Zn[CB₁₁H₁₂]₂·xH₂O dried at 100 °C (10^-3 S cm^-1 at 170 °C) and dried at 150 °C (10^-5 S cm^-1 at 170 °C). Solvent choice also proved important with the ionic conductivity of Mg[CB₁₁H₁₂]₂·3en (en = ethylenediamine) being higher than that of Mg[CB₁₁H₁₂]₂·3.1H₂O (2.6 × 10^-5 S cm^-1 and 1.7 × 10^-8 S cm^-1 at 100 °C, respectively), however, the oxidative stability was lower (<1 V (Mg²⁺/Mg) and 1.9 V (Mg²⁺/Mg), respectively). Thermal characterisation of the divalent closo-monocarborane salts showed melting and desolvation, prior to high temperature decomposition.

Solid-State Electrolytes for Rechargeable Magnesium-Ion Batteries: From Structure to Mechanism

Rechargeable magnesium (Mg)-ion batteries have received growing attention as a next-generation battery system owing to their advantages of sufficient reserves, lower cost, better safety, and higher volumetric energy density than lithium-ion batteries. However, Mg as an anode can be easily passivated during charging/discharging by most common solvents, which are inconducive for magnesium deposition/stripping. Based on this, the development of Mg-ion solid-state electrolytes in the last decades led to the formulization of several concepts beyond previously reported designs. These exciting studies have once again sparked an interest in all-solid-state magnesium-ion batteries. In this review, Mg solid-state electrolytes, including inorganic (oxides, hydrides, and chalcogenides) and organic (metal-organic frameworks and polymers) materials are classified and summarized in detail. Moreover, the structural characteristics and the migration mechanism of Mg²⁺ ions are also discussed with a focus on pending questions and future prospects.

Organic Crystalline Solid Electrolytes with High Mg-Ion Conductivity Composed of Nonflammable Ionic Liquid Analogs and Mg(TFSA)2

The development of solid electrolytes with Mg-ion conductivity at room temperature is an important issue to achieve all-solid magnesium batteries. We focus on organic ionic crystals with Mg-ion conduction paths in addition to nonflammable and nonvolatile features as an innovative candidate of solid electrolytes with Mg-ion conductivity. Herein, we show the development of novel organic ionic crystals, [N(CH₃)_4-n(CH₂CH₃)_n][Mg{N(SO₂CF₃)₂}₃] (n = 0 or 2), using analogs of ionic liquids, [N(CH₃)₄][N(SO₂CF₃)₂] (N₁₁₁₁TFSA) and [N(CH₃)₂(CH₂CH₃)₂][N(SO₂CF₃)₂] (N₁₁₂₂TFSA), and magnesium salt, Mg{N(SO₂CF₃)₂}₂ (Mg(TFSA)₂). We also report the crystal structures of the obtained crystals and the high Mg-ion conductivity of 10^-4 S cm^-1 under mild conditions of 80 °C in the solid state. These results indicate that organic ionic crystals with ion conduction paths have significant potential as safe solid electrolytes and provide insights into developing innovative Mg-ion conductors.

Opportunities and challenges for 2D heterostructures in battery applications: a computational perspective

With an increasing demand for large-scale energy storage systems, there is a need for novel electrode materials to store energy in batteries efficiently. 2D materials are promising as electrode materials for battery applications. Despite their excellent properties, none of the available single-phase 2D materials offers a combination of properties required for maximizing energy density, power density, and cycle life. This article discusses how stacking distinct 2D materials into a 2D heterostructure may open up new possibilities for battery electrodes, combining favourable characteristics and overcoming the drawbacks of constituent 2D layers. Computational studies are crucial to advancing this field rapidly with first-principles simulations of various 2D heterostructures forming the basis for such investigations that offer insights into processes that are hard to determine otherwise. We present a perspective on the current methodology, along with a review of the known 2D heterostructures as anodes and their potential for Li and Na-ion battery applications. 2D heterostructures showcase excellent tunability with different compositions. However, each of them has distinct properties, with its own set of challenges and opportunities for application in batteries. We highlight the current status and prospects to stimulate research into designing new 2D heterostructures for battery applications.

Advancing towards a Practical Magnesium Ion Battery

A post-lithium battery era is envisaged, and it is urgent to find new and sustainable systems for energy storage. Multivalent metals, such as magnesium, are very promising to replace lithium, but the low mobility of magnesium ion and the lack of suitable electrolytes are serious concerns. This review mainly discusses the advantages and shortcomings of the new rechargeable magnesium batteries, the future directions and the possibility of using solid electrolytes. Special emphasis is put on the diversity of structures, and on the theoretical calculations about voltage and structures. A critical issue is to select the combination of the positive and negative electrode materials to achieve an optimum battery voltage. The theoretical calculations of the structure, intercalation voltage and diffusion path can be very useful for evaluating the materials and for comparison with the experimental results of the magnesium batteries which are not hassle-free.

Role of Mg(NO3)2 as Defective Agent in Ameliorating the Electrical Conductivity, Structural and Electrochemical Properties of Agarose-Based Polymer Electrolytes

Polymer electrolytes based on agarose dissolved in DMSO solvent complexed with different weight percentages of Mg(NO3)2 ranging from 0 to 35 wt% were prepared using a solution casting method. Electrochemical impedance spectroscopy (EIS) was applied to study the electrical properties of this polymer electrolyte, such as ionic conductivity at room and different temperatures, dielectric and modulus properties. The highest conducting film has been obtained at 1.48 × 10-5 S·cm-1 by doping 30 wt% of Mg(NO3)2 into the polymer matrix at room temperature. This high ionic conductivity value is achieved due to the increase in the amorphous nature of the polymer electrolyte, as proven by X-ray diffractometry (XRD), where broadening of the amorphous peak can be observed. The intermolecular interactions between agarose and Mg(NO3)2 are studied by Fourier transform infrared (FTIR) spectroscopy by observing the presence of -OH, -CH, N-H, CH3, C-O-C, C-OH, C-C and 3,6-anhydrogalactose bridges in the FTIR spectra. The electrochemical properties for the highest conducting agarose-Mg(NO3)2 polymer electrolyte are stable up to 3.57 V, which is determined by using linear sweep voltammetry (LSV) and supported by cyclic voltammetry (CV) that proves the presence of Mg2+ conduction.

Critical Role of the Interphase at Magnesium Electrodes in Chloride-Free, Simple Salt Electrolytes

Magnesium (Mg) batteries are a potential beyond lithium-ion technology but currently suffer from poor cycling performance, partly due to the interphase formed when magnesium electrodes react with electrolytes. The use of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)₂) electrolytes would enable high-voltage intercalation cathodes, but many reports identify poor Mg plating/stripping in the electrolyte solution due to a passivating interphase. Here, we have assessed the Mg plating/stripping mechanism at bulk Mg electrodes in a Mg(TFSI)₂-based electrolyte by cyclic voltammetry, ex situ Fourier-transform infrared spectroscopy, and electron microscopy and compared this to the cycling of a Grignard-based electrolyte. Our studies indicate a nontypical cycling mechanism at Mg surfaces in Mg(TFSI)₂-based electrolytes that occurs through Mg deposits rather than the bulk electrode. Fourier-transform infrared spectroscopy demonstrates an evolution in the interphase chemistry during conditioning (repeated cycling) and that this is a critical step for stable cycling in the Mg(TFSI)₂-tetraglyme (4G) electrolyte. The fully conditioned electrode in Mg(TFSI)₂-4G is able to cycle with an overpotential of <0.25 V without additional additives such as Cl^- or BH₄^-.

Ultralong-Lifespan Magnesium Batteries Enabled by the Synergetic Manipulation of Oxygen Vacancies and Electronic Conduction

As a potential next-generation energy storage system, rechargeable magnesium batteries (RMBs) have been receiving increasing attention due to their excellent safety performance and high energy density. However, the sluggish kinetics of Mg²⁺ in the cathode has become one of the main bottlenecks restricting the development of RMBs. Here, we introduce oxygen vacancies to spherical NaV₆O₁₅ cross-linked with carbon nanotubes (CNTs) (denoted as SNVO_X-CNT) as a cathode material to achieve an impressive long-term cycle life of RMBs. The introduction of oxygen vacancies can improve the electrochemical performance of the NaV₆O_15-X cathode material. Besides, owing to the introduction of CNTs, excellent internal/external electronic conduction paths can be built inside the whole electrode, which further achieves excellent electrochemical performance. Moreover, such a unique structure can efficiently improve the diffusion kinetics of Mg²⁺ (ranging from 1.28 × 10^-12 to 7.21 × 10^-12 cm²·s^-1). Simulation calculations further prove that oxygen vacancies can cause Mg²⁺ to be inserted in NaV₆O_15-X. Our work proposes a strategy for the synergistic effect of oxygen vacancies and CNTs to improve the diffusion coefficient of Mg²⁺ in NaV₆O₁₅ and enhance the electrochemical performance of RMBs.

Hollow Mesoporous Carbon Spheres for High Performance Symmetrical and Aqueous Zinc-Ion Hybrid Supercapacitor

Zinc-ion hybrid supercapacitors are a promising energy storage device as they simultaneously combine the high capacity of batteries and the high power of supercapacitors. However, the practical application of Zinc-ion hybrid supercapacitors is hindered by insufficient energy density and poor rate performance. In this study, a symmetrical zinc-ion hybrid supercapacitor device was constructed with hollow mesoporous-carbon nanospheres as electrode materials, and aqueous ZnSO₄ adopted as an electrolyte. Benefiting from the mesoporous structure and high specific area (800 m²/g) of the hollow carbon nanospheres, fast capacitor-type ion adsorption/de-adsorption on both the cathode and the anode can be achieved, as well as additional battery-type Zn/Zn²⁺ electroplating/stripping on the anode. This device thus demonstrates outstanding electrochemical performance, with high capacity (212.1 F/g at 0.2 A/g), a high energy density (75.4 Wh/kg at 0.16 kW/kg), a good rate performance (34.2 Wh/kg energy density maintained at a high power density of 16.0 kW/kg) and excellent cycling stability with 99.4% capacitance retention after 2,500 cycles at 2 A/g. The engineering of this new configuration provides an extremely safe, high-rate, and durable energy-storage device.