Chiral Diketopyrrolopyrrole-Helicene Polymer With Efficient Red Circularly Polarized Luminescence

On-Surface Synthesis of Helicene Oligomers

We report on-surface synthesis of heterochiral 1D heptahelicene oligomers after deposition of a racemic heptahelicene monomer on an Au(111) surface followed by Ullmann coupling under ultrahigh vacuum conditions. Structure, chirality and mode of adsorption of the resulting dimers to octamers are inferred from the scanning probe microscopy and theoretical calculations.

Rational Design of New Conjugated Polymers with Main Chain Chirality for Efficient Optoelectronic Devices: Carbo[6]Helicene and Indacenodithiophene Copolymers as Model Compounds

The unique properties of conjugated polymers (CPs) in various optoelectronic applications are mainly attributed to their different self-assembly processes and superstructures. Various methods are utilized to tune and control CP structure and properties with less attention paid to the use of chirality. CPs with main chain chirality are rare and their microscopic and macroscopic properties are still unknown. In this work, the first experimental results are provided along these lines by synthesizing a series of racemic and enantiopure CPs containing statistical and alternating carbo[6]helicene and indacenodithiophene moieties and evaluating their microscopic (optical, energy levels) and macroscopic properties (hole mobilities, photovoltaic performance). It is demonstrated that a small statistical insertion of either the racemic or enantiopure helicene into the polymer backbone finely tunes the microscopic and macroscopic properties as a function of the statistical content. The microscopic properties of the enantiopure versus the racemic polymers with the same helicene loading remain similar. On the contrary, the macroscopic properties, and more interestingly those between the two enantiomeric forms, are altered as a function of the statistical content. Once incorporated into a solar cell device, these chiral CPs display better performance in their enantiopure versus racemic forms.

Crystalline, Porous Helicene Covalent Organic Frameworks

Helicenes are a class of fascinating chiral helical molecules with rich chemistry developed continuously over the past 100 years. Their helical, conjugated, and twisted structures make them attractive for constructing molecular systems. However, studies over the past century are mainly focused on synthesizing helicenes with increased numbers of aromatic rings and complex heterostructures, while research on inorganic, organic, and polymeric helicene materials is still embryonic. Herein, we report the first examples of helicene covalent organic frameworks, i.e., [7]Helicene sp2 c-COF-1, by condensing [7]Helicene dialdehyde with trimethyl triazine via the C=C bond formation reaction under solvothermal conditions. The resultant [7]Helicene sp2 c-COF-1 exhibits prominent X-ray diffraction peaks and assumes a highly ordered 2D lattice structure originated from the twisted configuration of [7]Helicene unit. The C=C linked [7]Helicene sp2 c-COF-1 materials exhibited extended π conjugation and broadly tuned their absorption, emission, redox activity, photoconductivity, and light-emitting activity, demonstrating rich multifunctionalities and great potentials in developing various applications. This work opens a way to a new family of COFs as well as helicene materials, enabling the exploration of unprecedented π architectures and properties.

Chiral diketopyrrolo[3,4-c]pyrrole-based oligothiophenes: Synthesis and characterization of aggregated states in solution and thin films

In this work, we synthesized a family of three structurally related chiral oligothiophenes containing a 1,4-diketo-3,6-diarylpyrrolo[3,4-c]pyrrole (DPP) unit as the central core; functionalized with the same (S)-3,7-dimethyl-1-octyl chains on the nitrogen atoms of lactam moieties, they only differ in the number of lateral thiophene units. The aggregation modes of these π-conjugated chiral systems were evaluated by means of UV-Vis absorption and ECD spectroscopies in conditions of solution aggregation (CHCl3 /MeOH mixtures) and as thin films, describing in particular the impact of the π-conjugation length on the chiroptical properties. Interestingly, we found that the variable number of thiophene units attached to the DPP core affects not only the propensity to aggregation but also the aggregates' helicity. ECD revealed information about the supramolecular arrangement of these molecules, that one would not obtain by using conventional optical spectroscopy and microscopy techniques. Thin film samples revealed very different aggregation modes with respect to solution aggregates, casting doubts on the common assumption that these latter may serve as simple models of the former ones.

Self-assembly of chiral diketopyrrolopyrrole chromophores giving supramolecular chains in monolayers and twisted microtapes

Chiral diketopyrrolopyrroles appended with enantiomeric ethyl lactate functions through an ether linkage to the aryl backbone of the chromophore were synthesized via the Mitsunobu reaction. The molecules have good solubility and excellent optical properties, high molar absorption coefficients, and fluorescence quantum yields. Helical aggregates with circular dichroism arising from the supramolecular arrangement are seen in both solution and thin films, and the aggregates also display circularly polarized luminescence (glum  ≈ ±0.1). The molecules assemble to give monolayers on graphite and precipitate from solution forming supramolecular twisted tapes hundreds of microns long.

Modular enhancement of circularly polarized luminescence in Pd2A2B2 heteroleptic cages

Metal-mediated assembly allows us to combine an achiral emissive ligand A with different chiral ligands (such as B) in a non-statistical fashion, obtaining Pd₂A₂B₂ heteroleptic cages showing circularly polarized luminescence (CPL). By using the 'shape complementary assembly' (SCA) strategy, the cages are exclusively obtained as cis-Pd₂A₂B₂ stereoisomers, as confirmed by NMR, MS and DFT analyses. Their unique chiroptical properties derive from the synergy of all the building blocks. Ligand B imparts the chiral information of its aliphatic backbone, comprising two stereogenic sp³ carbon centres, to the overall structure, causing CD and CPL signal induction for the chromophore on ligand A. The heteroleptic cage shows CPL with a |g_lum| value of 2.5 × 10^-3, which is 3-times higher than that for a progenitor based on aromatic helical building block H, thus opening a rational route towards optimizing the CPL properties of self-assembled nanostructures in a modular way.

Full Control of the Chiral Overpass Effect in Helical Polymers: P/M Screw Sense Induction by Remote Chiral Centers After Bypassing the First Chiral Residue

In helical polymers, helical sense induction is usually commanded by teleinduction mechanism, where the largest substituent of the chiral residue directly attached to the main chain is the one that commands the helical sense. In this work, different helical structures with different helical senses are induced in a helical polymer [poly-(phenylacetylene)] when the conformational composition of two different dihedral angles of a pendant group with more than two chiral residues is tamed. Thus, while the dihedral angle at chiral residue 1 [(R)- or (S)-alanine], attached to the backbone, produces an extended or bent conformation in the pendant resulting in two scaffolds with different stretching degree, the second dihedral angle at chiral residue 2 [(R)- or (S)-methoxyphenylacetamide] places the substituents of this chiral center in a different spatial orientation, originating opposite helical senses at the polymer that are induced through a total control of the "chiral overpass effect".

An Iterative Approach to Unsaturated and Partially Saturated [7]Helicenes

We report a simple, iterative strategy for the synthesis of [7]helicenes starting from substituted 1,4-xylene building blocks. In the first step, we take advantage of the deprotonatable methyl groups to achieve ethano-bridged dimers. These are oxidatively coupled (without using metal-containing catalysts or light) using a hypervalent iodine reagent. Both steps are repeated to obtain the respective σ/π-helicenes. The degree of saturation can be controlled thermally during the oxidative coupling.

Highly contorted superhelicene hits near-infrared circularly polarized luminescence

Herein we describe a novel superhelicene structure consisting of three hexa-peri-hexabenzocoronene (HBC) units arranged in a helical geometry and creating two carbo[5]helicenes and a carbo[7]helicene. The central HBC bears a...

Exciton coupling chirality in helicene-porphyrin conjugates

Enantiopure helicene-porphyrin conjugates were prepared. They show strong changes in their circular dichroic response as compared to classical helicene derivatives, with highly intense bisignate Exciton Coupling (EC) signal and Δε values up to 680 M^-1 cm^-1 for the Soret band. They also display circularly polarized fluorescence in the (far-)red region, with dissymmetry factors up to 7 × 10^-4.

The Underexplored Field of Lanthanide Complexes with Helicene Ligands: Towards Chiral Lanthanide Single Molecule Magnets

The effective combination of chirality and magnetism in a single crystalline material can lead to fascinating cross-effects, such as magneto-chiral dichroism. Among a large variety of chiral ligands utilized in the design and synthesis of chiral magnetic materials, helicenes seem to be the most appealing ones, due to the exceptionally high specific rotation values that reach thousands of deg·cm3·g−1·dm−1, which is two orders of magnitude higher than for compounds with chiral carbon atoms. Despite the sizeable family of transition metal complexes with helicene-type ligands, there are only a few examples of such complexes with lanthanide ions. In this mini-review, we describe the most recent developments in the field of lanthanide-based complexes with helicene-type ligands and summarize insights regarding the further exploration of this family of compounds towards multifunctional chiral lanthanide single molecule magnets (Ln-SMMs).

Helical donor-acceptor platinum complexes displaying dual luminescence and near-infrared circularly polarized luminescence

A series of chiral platina[5]helicenes displaying dual luminescence, i.e., fluorescence between 450 and 600 nm and red/NIR phosphorescence between 700 and 900 nm, has been synthesised, characterised and studied by first-principle calculations. This unusual behavior has been attributed to limited electronic interactions between the d orbitals of the metal and the π-orbitals of the organic ligand on the excited-state. Accordingly, the electron richness of the donor group on the helical ligand does not affect the energy of the phosphorescence process but does play a role on its efficiency. Interestingly, near-infrared circularly polarized luminescence can be obtained for the three complexes with dissymmetry factors up to 3 × 10^-3 at 750 nm.

Straightforward N-alkylation of diketopyrrolopyrroles through the Mitsunobu reaction with benzyl, α-branched, and chiral alcohols

The N-alkylation of diketopyrrolopyrroles (DPPs) represents a fundamental step to ensure solubility and further processability. Commonly used nucleophilic substitution in halogenated derivatives is replaced in this work by the Mitsunobu reaction affording unprecedented DPPs with α-branched and chiral chains.

Heterohelicenes through 1,3-Dipolar Cycloaddition of Sydnones with Arynes: Synthesis, Origins of Selectivity, and Application to pH-Triggered Chiroptical Switch with CPL Sign Reversal

Regioselective access to heterohelicenes through the 1,3-dipolar cycloaddition of sydnones with arynes is described. Novel access to sydnones and poly(hetero)aromatic aryne precursors allowed the introduction of chemical diversity over multiple positions of the helical scaffolds. The origins of the unconventional regioselectivity during the cycloaddition steps was systematically investigated using density functional theory (DFT) calculations, unveiling the key features that control this reactivity, namely, face-to-face (π···π) or edge-to-face (C-H···π) interactions, primary orbital interactions and distortion from coplanarity in the transition structures (TSs) of the transformation. From the library of 24 derivatives synthesized, a pyridyl containing derivative displayed reversible, red-shifted, pH-triggered chiroptical switching properties, with CPL-sign reversal. It is found that protonation of the helicene causes a change of the angle between the electric and magnetic dipole moments related to the S₁ → S₀ transition, resulting in this rare case of reversible CPL sign inversion upon application of an external stimulus.

Achieving high circularly polarized luminescence with push-pull helicenic systems: from rationalized design to top-emission CP-OLED applications

While the development of chiral molecules displaying circularly polarized luminescence (CPL) has received considerable attention, the corresponding CPL intensity, g lum, hardly exceeds 10-2 at the molecular level owing to the difficulty in optimizing the key parameters governing such a luminescence process. To address this challenge, we report here the synthesis and chiroptical properties of a new family of π-helical push-pull systems based on carbo[6]helicene, where the latter acts as either a chiral electron acceptor or a donor unit. This comprehensive experimental and theoretical investigation shows that the magnitude and relative orientation of the electric (μe ) and magnetic (μ m ) dipole transition moments can be tuned efficiently with regard to the molecular chiroptical properties, which results in high g lum values, i.e. up to 3-4 × 10-2. Our investigations revealed that the optimized mutual orientation of the electric and magnetic dipoles in the excited state is a crucial parameter to achieve intense helicene-mediated exciton coupling, which is a major contributor to the obtained strong CPL. Finally, top-emission CP-OLEDs were fabricated through vapor deposition, which afforded a promising g El of around 8 × 10-3. These results bring about further molecular design guidelines to reach high CPL intensity and offer new insights into the development of innovative CP-OLED architectures.