Optimized Interfaces in Anti-Perovskite Electrolyte-Based Solid-State Lithium Metal Batteries for Enhanced Performance

Toward Achieving a High Ionic Conducting Halide Solid Electrolyte through Low-Cost Metal (Zr and Fe) and F Substitution and Their Admirable Performance in All-Solid-State Batteries

Recently, the halide solid electrolyte (SE) system has been widely used in lithium solid-state batteries due to their specific properties, such as the high electrochemical stability window that prevents any side reaction with the electrode/electrolyte interface. Conspicuously, the halide SE possesses very low ionic conductivity values in the range (0.2-0.5) mS cm-1. In this work, we enhance the ionic conductivity of Li3YCl6 SE by the substitution of low-cost Fe and Zr elements on the Y-site and F on the Cl site, in which the electrolyte is prepared through high-energy ball milling without a heat treatment process. The structural analysis reveals that the prepared halide SEs showed the pure phase of the Li3YCl6 tetragonal crystal structure and were free from impurity phases. In the prepared composition, the Li2.4Y0.4Zr0.6Cl6 and Li2.4Y0.4Zr0.6Cl5.85F0.15 electrolyte exhibited a higher ionic conductivity of 2.05 and 1.45 mS cm-1, respectively, than Li3YCl6 (0.26 mS cm-1). Interestingly, the Li2.4Y0.4Zr0.6Cl5.85F0.15 electrolyte possesses a better electrochemical stability window of 1.29-3.9 V than Li2.4Y0.4Zr0.6Cl6 (2.1-3.79 V). Moreover, the electrochemical results revealed that the assembled solid-state battery using Li2.4Y0.4Zr0.6Cl6 and Li2.4Y0.4Zr0.6Cl5.85F0.15 electrolyte demonstrated the higher initial Coulombic efficiency of 84.7 and 87%, respectively, than Li3YCl6 of 82.6%. We consider Li2.4Y0.4Zr0.6Cl5.85F0.15 to be an important electrolyte candidate in all-solid-state batteries.

Argyrodite-Li6PS5Cl/Polymer-based Highly Conductive Composite Electrolyte for All-Solid-State Batteries

Solid-state batteries (SSBs) that incorporate the argyrodite-Li6PS5Cl (LPSCl) electrolyte hold potential as substitutes for conventional lithium-ion batteries (LIBs). However, the mismatched interface between the LPSCl electrolyte and electrodes leads to increased interfacial resistance and the rapid growth of lithium (Li) dendrites. These factors significantly impede the feasibility of their widespread industrial application. In this study, we developed a composite electrolyte of the LPSCl/polymer to enhance the contact between the electrolyte and electrodes and suppress dendrite formation at the grain boundary of the LPSCl ceramic. The monomer, triethylene glycol dimethacrylate (TEGDMA), is utilized for in situ polymerization through thermal curing to create the argyrodite LPSCl/polymer composite electrolyte. Additionally, the ball-milling technique was employed to modify the morphology and particle size of the LPSCl ceramic. The ball-milled LPSCl/polymer composite electrolyte demonstrates slightly higher ionic conductivity (ca. 2.21 × 10-4 S/cm) compared to the as-received LPSCl/polymer composite electrolyte (ca. 1.65 × 10-4 S/cm) at 25 °C. Furthermore, both composite electrolytes exhibit excellent compatibility with Li-metal and display cycling stability for up to 1000 h (375 cycles), whereas the as-received LPSCl and ball-milled LPSCl electrolytes maintain stability for up to 600 h (225 cycles) at a current density of 0.4 mA/cm2. The SSB with the ball-milled LPSCl/polymer composite electrolyte delivers high specific discharge capacity (138 mA h/g), Coulombic efficiency (99.97%), and better capacity retention at 0.1C, utilizing the battery configuration of coated NMC811//electrolyte//Li-Indium (In) at 25 °C.