The fingerprint of pesticides in agricultural used polyethylene

The widespread use of polyethylene (PE) materials in agriculture through mulch films, tunnels, greenhouse covers, irrigation pipes and tying tapes has been instrumental in increasing crop productivity and reducing water demand. However, it raised concerns regarding the interaction between PE and pesticides sprayed on crops. This research strives to study the fingerprint of pesticides in agricultural PE by analyzing new items, end-of-life agricultural plastics and a range of samples corresponding to the recycling of aged PE, from sized and washed flakes to second-hand pellets and plant protection tubes elaborated from recycled plastic. Total concentrations determined for a selection of fungicides and insecticides in the abovementioned materials varied between 4.7 ng g-1 and 4179 ng g-1, with the fungicides cyprodinil and difenoconazole showing the highest concentrations. Furthermore, transformation products of pesticides phased out more than 40 years ago, e.g., p,p'-DDE, were found in some PE items. The survival of pesticides at temperatures above the melting point of this polymer was confirmed in laboratory-scale melting experiments, as well as through the analysis of second-hand pellets. Experiments carried out using pesticide-polluted dripline pipes confirmed the migration of these compounds from PE to flowing water.

Towards sustainable agroecosystems: A life cycle assessment review of soil-biodegradable and traditional plastic mulch films

The increasing use of traditional agricultural plastic mulch films (PMs) has raised significant environmental concerns, prompting the search for sustainable alternatives. Soil-biodegradable mulch films (BDMs) are often proposed as eco-friendly replacements; however, their widespread adoption remains contentious. This review employs a comparative life cycle assessment perspective to evaluate the environmental impact of PMs and BDMs across their production, use, and end-of-life stages, providing strategies to mitigate their impact on agroecosystems. BDMs generally exhibit lower energy use and greenhouse gas emissions than PMs but contribute to greater land-use demands. Reported eutrophication and acidification potentials are less consistent, varying based on feedstock types and the scope of assessment of BDM, as well as the end-of-life management of PM. The environmental burden of both mulch types is influenced by the life cycle stage, polymer composition, farming practices, additives, film thickness, and local climatic conditions. The manufacturing stage is a major contributor to energy use and greenhouse gas emissions for both PMs and BDMs, despite their shared benefits of increasing crop yields. However, post-use impacts are more pronounced for PMs, driven by end-of-life strategy and adsorbed waste content. While starch-based BDMs offer a more sustainable alternative to PMs, uncertainties regarding the residence time of BDM residues in soil (albeit shorter than PM residues) and their effects on soil health, coupled with higher production costs, impede widespread adoption. For BDM end-of-life, soil biodegradation is recommended. Energy and material recovery options are crucial for PM end-of-life, with mechanical recycling preferred, although it requires addressing eutrophication and human toxicity. This review discusses these complexities within specific contexts and provides actionable insights to guide the sustainable integration of mulch films into agricultural practices.

Embracing Nature's Clockwork: Crafting Plastics for Degradation in Plant Agricultural Systems

In the 21st century, global agriculture confronts the urgent challenge of increasing food production by 70% by 2050 while simultaneously addressing environmental and health concerns. Plastics, integral to agricultural innovation, present sustainability challenges due to their non-biodegradable nature and contribution to pollution. This perspective examines the transition to bioplastics, emphasizing their bio-based origin and their crucial characteristic of being readily biodegradable in the soil. Key bioplastics such as poly(lactic acid) (PLA), polyhydroxyalkanoates (PHAs), and biomass-derived polymers are discussed, particularly regarding the microplastic generation in soil resulting from their use in specific applications like mulch films, delivery systems, and soil conditioners. Embracing bioplastics signifies a significant step forward in achieving sustainable agriculture and addressing plastic waste. However, it is highlighted that while some bioplastics can be recovered and recycled, special applications where the plastic is in intimate contact with soil pose challenges for recovery. In these cases, that represent more than the 50% of plastics used in agriculture, meticulous design for biodegradation in soil synchronized with agricultural cycles is necessary. This approach ensures minimal environmental impact and promotes a circular approach to plastic use in agriculture.

Mass spectral characterisation of cyclic oligoesters in a biodegradable mulch film

RATIONALE

Plastic mulch film manages weed growth and moisture loss on the surface of cropping beds. The chemical components of such plastics include polymer(s), additives and non-intentionally added substances (NIASs). The unknown chemical nature and behaviours of these constituents require investigation due to their potential to add to the anthropogenic chemical burden in the agrifood system.

METHODS

Solvent extracts of a commercial 15% polylactic acid (PLA)/85% poly(butylene adipate-co-terephthalate) mulch film were investigated using gas chromatography-mass spectrometry (GC-MS) with electron ionisation to characterise the additive and NIAS components. The obscurity of some of the NIASs meant their identification was not readily achieved through routine MS library comparisons. As such, the identification of several polymer-derived compounds required interpretation of the MS data and re-application of the derived fragmentation patterns with reference to the wider literature. Unknowns were confirmed using commercially available compounds.

RESULTS

Unknown NIASs were identified as cyclic oligoesters comprised of the monomeric building blocks of the polymer system. Cyclic structures derived from the monomers of polybutylene adipate (PBA) and polybutylene terephthalate (PBT) fragmented through a primary pathway involving 1,5- and 1,3-H transfers at ester linkages. Characteristic ions at m/z 111, 129, 183 and 201 for PBA-derived cyclic oligoesters and m/z 104, 132, 149 and 221 for PBT-derived cyclic oligoesters were assigned in the mass spectra of unknowns. Cyclic oligoesters containing sebacate moieties were also identified, indicating the presence of polybutylene sebacate as an unexpected component of the mulch.

CONCLUSIONS

Systematic analyses of the sort reported here are valuable for providing alternative approaches for the identification of plastic-related chemicals. Open publication of MS spectral data is required to build a greater understanding of the mulch film chemical components contributing to the environmental chemical load introduced to agroecosystems.

Machine learning-assisted assessment of key meteorological and crop factors affecting historical mulch pollution in China

Degraded mulch pollution is of a great concern for agricultural soils. Although numerous studies have examined this issue from an environmental perspective, there is a lack of research focusing on crop-specific factors such as crop type. This study aimed to explore the correlation between meteorological and crop factors and mulch contamination. The first step was to estimate the amounts of mulch-derived microplastics (MPs) and phthalic acid esters (PAEs) during the rapid expansion period (1993-2012) of mulch usage in China. Subsequently, the Elastic Net (EN) and Random Forest (RF) models were employed to process a dataset that included meteorological, crop, and estimation data. At the national level, the RF model suggested that coldness in fall was crucial for MPs generation, while vegetables acted as a key factor for PAEs release. On a regional scale, the EN results showed that crops like vegetables, cotton, and peanuts remained significantly involved in PAEs contamination. As for MPs generation, coldness prevailed over all regions. Aridity became more critical for southern regions compared to northern regions due to solar radiation. Lastly, each region possessed specific crop types that could potentially influence its MPs contamination levels and provide guidance for developing sustainable ways to manage mulch contamination.

Formation, behavior, properties and impact of micro- and nanoplastics on agricultural soil ecosystems (A Review)

Micro and nanoplastics (MPs and NPs, respectively) in agricultural soil ecosystems represent a pervasive global environmental concern, posing risks to soil biota, hence soil health and food security. This review provides a comprehensive and current summary of the literature on sources and properties of MNPs in agricultural ecosystems, methodology for the isolation and characterization of MNPs recovered from soil, MNP surrogate materials that mimic the size and properties of soil-borne MNPs, and transport of MNPs through the soil matrix. Furthermore, this review elucidates the impacts and risks of agricultural MNPs on crops and soil microorganisms and fauna. A significant source of MPs in soil is plasticulture, involving the use of mulch films and other plastic-based implements to provide several agronomic benefits for specialty crop production, while other sources of MPs include irrigation water and fertilizer. Long-term studies are needed to address current knowledge gaps of formation, soil surface and subsurface transport, and environmental impacts of MNPs, including for MNPs derived from biodegradable mulch films, which, although ultimately undergoing complete mineralization, will reside in soil for several months. Because of the complexity and variability of agricultural soil ecosystems and the difficulty in recovering MNPs from soil, a deeper understanding is needed for the fundamental relationships between MPs, NPs, soil biota and microbiota, including ecotoxicological effects of MNPs on earthworms, soil-dwelling invertebrates, and beneficial soil microorganisms, and soil geochemical attributes. In addition, the geometry, size distribution, fundamental and chemical properties, and concentration of MNPs contained in soils are required to develop surrogate MNP reference materials that can be used across laboratories for conducting fundamental laboratory studies.

Microplastics in agricultural soils in China: Sources, impacts and solutions

The detection of microplastics (MPs) in agricultural soils has raised alarms on their potential impacts on agricultural production, particularly in China where agriculture has great importance for domestic consumption and export. This review aims to present the abundance, sources and impacts of MPs in the agricultural soils of China. It has the novelty of synthesizing sustainable agronomic practices to reduce MPs pollution of agricultural soils based on the sources identified. According to the extant study, the abundance of MPs in the agricultural soils in China ranged from 4.94 items/kg in the lower reaches of Yangtze River to 40,800 items/kg in Yunnan Province. The MPs were predominantly ≤1 mm and were mainly composed of fragments, films and fibers. Polyethylene and polypropylene MPs were most reported. Plastic mulching films were the most significant source of MPs in agricultural soils, followed by abandoned greenhouses and the use of organic fertilizers containing fugitive MPs or whose sources were often MPs-polluted. MPs were found to alter soil physicochemical properties for instance, water flow, water-stable aggregates, soil aggregation, soil pH, bulk density and nutrient contents. MPs also affect soil biota through changing the richness and diversity of soil microbial community while retarding growth and disrupting physiological functions of soil macrofauna. The effects of MPs on crops vary and range from alteration of biomass, metabolism and nutrient demands to impacted photosynthesis. Sustainable solutions include the use of grass clippings - straw mix as organic mulches, the use of compost as soil amendment in conjunction with grass-straw mix and incorporation of weed-suppressing biomass into compost, the use of jute and biodegradable plastics for greenhouses, proper decommissioning of abandoned greenhouses as well as setting standards for allowable MPs contents in organic fertilizers and irrigation water.