In-vivo Performance of Seven Commercially Available Demineralized Bone Matrix Fiber and Putty Products in a Rat Posterolateral Fusion Model

Porcine Bone Extracellular Matrix Hydrogel as a Promising Graft for Bone Regeneration

Bone defects resulting from trauma, tumors, or congenital conditions pose significant challenges for natural healing and often require grafting solutions. While autografts remain the gold standard, their limitations, such as restricted availability and donor site complications, underscore the need for alternative approaches. The present research investigates the potential of porcine-derived bone extracellular matrix (pbECM) hydrogel as a highly promising bioactive scaffold for bone regeneration, comparing it to the human-derived bECM (hbECM). Porcine and human cancellous bones were decellularized and characterized in terms of their composition and structure. Further, the ECMs were processed into hydrogels, and their rheological properties and cytocompatibility were studied in vitro while their biocompatibility was studied in vivo using a mouse model. The potential of the pbECM hydrogel as a bone graft was evaluated in vivo using a rat femoral defect model. Our results demonstrated the excellent preservation of essential ECM components in both the pbECM and hbECM with more than 90% collagen out of all proteins. Rheological analyses revealed the superior mechanical properties of the pbECM hydrogel compared to the hbECM, with an approximately 10-fold higher storage modulus and a significantly later deformation point. These stronger gel properties of the pbECM were attributed to the higher content of structural proteins and residual minerals. Both the pbECM and hbECM effectively supported mesenchymal stem cell adhesion, viability, and proliferation, achieving a 20-fold increase in cell number within 10 days and highlighting their strong bioactive potential. In vivo, pbECM hydrogels elicited a minimal immunogenic response. Most importantly, when implanted in a rat femoral defect model, pbECM hydrogel had significantly enhanced bone regeneration through graft integration, stem cell recruitment, and differentiation. New bone formation was observed at an average of 50% of the defect volume, outperforming the commercial demineralized bone matrix (DBM), in which the new bone filled only 35% of the defect volume. These results position pbECM hydrogel as a highly effective and biocompatible scaffold for bone tissue engineering, offering a promising alternative to traditional grafting methods and paving the way for future clinical applications in bone repair.

Local drug delivery challenges and innovations in spinal neurosurgery

The development of novel therapeutics in the field of spinal neurosurgery faces a litany of translational challenges. Achieving precise drug targeting within the confined spaces associated with the spinal cord, canal and vertebra requires the development of next generation delivery systems and devices. These must be capable of overcoming inherent barriers related to drug diffusion, whilst concurrently ensuring optimal drug distribution and retention. In this review, we provide an overview of the most recent advances in the therapeutic management of diseases and disorders affecting the spine, including systems and devices capable of releasing small molecules and biopharmaceuticals that help eliminate pain and restore the mechanical function and stability of the spine. We highlight material-based approaches and minimally invasive techniques that can be employed to provide control over drug release kinetics and improve retention. We also seek to explore how the newest advancements in nanotechnology, biomaterials, additive manufacturing technologies and imaging modalities can be employed in this translational pursuit. Finally, we discuss the landscape of clinical trials and recently approved products aimed at overcoming the complexities associated with drug delivery to the spine.

Mesenchymal Stem Cell Exosomes Enhance Posterolateral Spinal Fusion in a Rat Model

Spinal fusion, a common surgery performed for degenerative lumbar conditions, often uses recombinant human bone morphogenetic protein 2 (rhBMP-2) that is associated with adverse effects. Mesenchymal stromal/stem cells (MSCs) and their extracellular vesicles (EVs), particularly exosomes, have demonstrated efficacy in bone and cartilage repair. However, the efficacy of MSC exosomes in spinal fusion remains to be ascertained. This study investigates the fusion efficacy of MSC exosomes delivered via an absorbable collagen sponge packed in a poly Ɛ-caprolactone tricalcium phosphate (PCL-TCP) scaffold in a rat posterolateral spinal fusion model. Herein, it is shown that a single implantation of exosome-supplemented collagen sponge packed in PCL-TCP scaffold enhanced spinal fusion and improved mechanical stability by inducing bone formation and bridging between the transverse processes, as evidenced by significant improvements in fusion score and rate, bone structural parameters, histology, stiffness, and range of motion. This study demonstrates for the first time that MSC exosomes promote bone formation to enhance spinal fusion and mechanical stability in a rat model, supporting its translational potential for application in spinal fusion.

Demineralized Bone Matrix and Fibers in Spinal Fusion

Formation of bony fusion after arthrodesis depends on osteoinduction, osteoconduction, and osteogenesis. Traditionally, the patient's own bone, or autograft, has been used to provide biological material necessary for these steps. However, the amount of autograft obtainable is often inadequate. Modern spine surgery has adopted the use of many autograft extenders or replacements, such as demineralized bone matrix or fibers. The present article covers the history of bone grafting, the production and technical details of demineralized bone matrix, and the evidence supporting its use in spine fusions.

Comparison of demineralized bone matrix with different cycling crushing times in posterolateral fusion model of athymic rats

Decalcified bone matrix (DBM) is a widely used alternative material for bone transplantation. In the DBM production process, an effective particle size and the highest utilization rate of raw materials can be achieved only through multiple high-speed circulating comminution. The rat posterolateral lumbar fusion model (PLF) is the most mature small animal model for the initial evaluation of the efficacy of graft materials for bone regeneration and spinal fusion. To evaluate the differences in the in vivo osteogenic effects of DBM pulverization through 1, 5, 9, and 14 high-speed cycles, sixty athymic rats were divided into six groups: single cycling crushing (CC1), 5 cycles of crushing (CC5), 9 cycles of crushing (CC9), 13 cycles of crushing (CC13), autogenous bone graft (ABG) and negative control (NC). Posterolateral lumbar fusion was performed. Six weeks after surgery, the bilateral lumbar fusion of athymic rats was evaluated through manual palpation, X-ray, micro-CT and histological sections. Rank data were tested by the rank-sum test, and nonparametric data were tested by the Kruskal‒Wallis H test. The manual palpation and X-ray results showed that the fusion rate did not significantly differ between the CC1, CC5, CC9, CC13 and ABG groups. However, cavities appeared in CC9 and CC13 on the micro-CT image. The bone mass (BV/TV) of CC1, CC5, CC9 and CC13 was better than that of the ABG group, while almost no osteogenesis was observed in the NC group. Histologically, there was no obvious difference between the four groups except that the CC9 group and CC13 group had more fibrous tissues in the new bone. In conclusion, DMB with different cycling crushing times has no obvious difference in fusion rate of PLF, but it is slightly better than the ABG group.

Comparative Evaluation of Mineralized Bone Allografts for Spinal Fusion Surgery

The primary objective of this review is to evaluate whether the degree of processing and the clinical utility of commercially available mineralized bone allografts for spine surgery meet the 2020 US Food and Drug Administration's (FDA) guideline definitions for minimal manipulation and homologous use, respectively. We also assessed the consistency of performance of these products by examining the comparative postoperative radiographic fusion rates following spine surgery. Based on the FDA's criteria for determining whether a structural allograft averts regulatory oversight and classification as a drug/device/biologic, mineralized bone allografts were judged to meet the Agency's definitional descriptions for minimal manipulation and homologous use when complying with the American Association of Tissue Banks' (AATB) accredited guidelines for bone allograft harvesting, processing, storing and transplanting. Thus, these products do not require FDA medical device clearance. Radiographic fusion rates achieved with mineralized bone allografts were uniformly high (>85%) across three published systematic reviews. Little variation was found in the fusion rates irrespective of anatomical location, allograft geometry, dimensions or indication, and in most cases, the rates were similar to those for autologous bone alone. Continued utilization of mineralized bone allografts should be encouraged across all spine surgery applications where supplemental grafts and/or segmental stability are required to support mechanically solid arthrodeses.

Demineralized cortical fibers are associated with a low pseudarthrosis rate in patients undergoing surgery for adult spinal deformity without three-column osteotomy

Introduction

Following surgical treatment for adult spinal deformity (ASD) there is an increased risk of revision surgery due to mechanical failure or pseudarthrosis. Demineralized cortical fibers (DCF) were introduced at our institution aiming to reduce the risk of pseudarthrosis after ASD surgery.

Research question

We wanted to investigate the effect of DCF on postoperative pseudarthrosis compared with allogenic bone graft in ASD surgery without three-column osteotomies (3CO).

Materials & Methods

All patients undergoing ASD surgery between January 1, 2010 to June 31, 2020 were included in this interventional study with historical controls. Patients with current or previous 3CO were excluded. Before February 1, 2017, patients undergoing surgery received auto- and allogenic bone graft (non-DCF group) whilst patients after received DCF in addition to autologous bone graft (DCF group). Patients were followed for at least two years. The primary outcome was radiographic or CT-verified postoperative pseudarthrosis requiring revision surgery.

Results

We included 50 patients in the DCF group and 85 patients in the non-DCF group for final analysis. Pseudarthrosis requiring revision surgery at two-year follow-up occurred in seven (14%) patients in the DCF group compared with 28 (33%) patients in the non-DCF group (p ​= ​0.016). The difference was statistically significant, corresponding to a relative risk of 0.43 (95%CI: 0.21-0.94) in favor of the DCF group.

Conclusion

We assessed the use of DCF in patients undergoing ASD surgery without 3CO. Our results suggest that the use of DCF was associated with a considerable decreased risk of postoperative pseudarthrosis requiring revision surgery.

Murine models of posterolateral spinal fusion: A systematic review

BACKGROUND

Rodent models are commonly used experimentally to assess treatment effectiveness in spinal fusion. Certain factors are associated with better fusion rates. The objectives of the present study were to report the protocols most frequently used, to evaluate factors known to positively influence fusion rate, and to identify new factors.

METHOD

A systematic literature search of PubMed and Web of Science found 139 experimental studies of posterolateral lumbar spinal fusion in rodent models. Data for level and location of fusion, animal strain, sex, weight and age, graft, decortication, fusion assessment and fusion and mortality rates were collected and analyzed.

RESULTS

The standard murine model for spinal fusion was male Sprague Dawley rats of 295g weight and 13 weeks' age, using decortication, with L4-L5 as fusion level. The last two criteria were associated with significantly better fusion rates. On manual palpation, the overall mean fusion rate in rats was 58% and the autograft mean fusion rate was 61%. Most studies evaluated fusion as a binary on manual palpation, and only a few used CT and histology. Average mortality was 3.03% in rats and 1.56% in mice.

CONCLUSIONS

These results suggest using a rat model, younger than 10 weeks and weighing more than 300 grams on the day of surgery, to optimize fusion rates, with decortication before grafting and fusing the L4-L5 level.

Bone Mineralization in Electrospun-Based Bone Tissue Engineering

Increasing the demand for bone substitutes in the management of bone fractures, including osteoporotic fractures, makes bone tissue engineering (BTE) an ideal strategy for solving the constant shortage of bone grafts. Electrospun-based scaffolds have gained popularity in BTE because of their unique features, such as high porosity, a large surface-area-to-volume ratio, and their structural similarity to the native bone extracellular matrix (ECM). To imitate native bone mineralization through which bone minerals are deposited onto the bone matrix, a simple but robust post-treatment using a simulated body fluid (SBF) has been employed, thereby improving the osteogenic potential of these synthetic bone grafts. This study highlights recent electrospinning technologies that are helpful in creating more bone-like scaffolds, and addresses the progress of SBF development. Biomineralized electrospun bone scaffolds are also reviewed, based on the importance of bone mineralization in bone regeneration. This review summarizes the potential of SBF treatments for conferring the biphasic features of native bone ECM architectures onto electrospun-based bone scaffolds.

Use of demineralized cortical fibers is associated with reduced risk of pseudarthrosis after pedicle subtraction osteotomy for adult spinal deformity

PURPOSE

To assess the effect of demineralized cortical fibers (DCF) on postoperative pseudarthrosis requiring revision surgery in patients undergoing pedicle subtraction osteotomy (PSO) for adult spinal deformity (ASD).

METHODS

The use of DCF was introduced across all procedures in 2017 and subsequent patients undergoing PSO surgery were prospectively and consecutively registered. Following sample-size estimation, a retrospective cohort was also registered undergoing the same procedure immediately prior to the implementation of DCF. The non-DCF group underwent surgery with ABG. Minimum follow-up was 2 years in both groups. The main outcome was postoperative pseudarthrosis, either CT-verified or verified intraoperatively during revision surgery due to rod breakage and assessed using Kaplan-Meier survival analyses.

RESULTS

A total of 48 patients were included in the DCF group and 76 in the non-DCF group. The DCF group had more frequently undergone previous spine surgery (60% vs 36%) and had shorter follow-up (32 ± 2 vs 40 ± 7 months). Pseudarthrosis occurred in 7 (15%) patients in the DCF group and 31 (41%) in the non-DCF group, corresponding to a relative risk increase of 2.6 (95%CI 1.3-2.4, P < 0.01). 1-KM survival analyses, taking time to event into account and thus the difference in follow-up, also showed increased pseudarthrosis in the non-DCF group (log-rank P = 0.022). Similarly, multivariate logistic regression adjusted for age, instrumented levels and sacral fusion was also with significantly increased odds of pseudarthrosis in the non-DCF group (OR: 4.3, 95%CI: 1.7-11.3, P < 0.01).

CONCLUSION

We found considerable and significant reductions in pseudarthrosis following PSO surgery with DCF compared to non-DCF.

LEVEL OF EVIDENCE

III.

Characterization of non-solvent- and thermal-induced phase separation applied polycaprolactone/demineralized bone matrix scaffold for bone tissue engineering

Objective

Polycaprolactone (PCL) is a widely applied biomaterial in bone tissue engineering (BTE) due to its superior mechanical properties and biodegradability. However, the high hydrophobicity and low cell adhesion properties of PCL show limited cell interactions. Herein, we prepared the porous PCL/DBP composites with improved cell adhesion through the addition of demineralized bone powder (DBP). Three-dimensional scaffolds were fabricated by mixing various concentrations of DBP with PCL and applying non-solvent-induced phase separation (NIPS) and thermal-induced phase separation (TIPS) (N-TIPS) and solvent casting and particulate leaching (SCPL) to impart porosity.

Methods

A characteristic evaluation was performed through X-ray diffraction (XRD), morphological analysis, physicochemical analysis, bioactivity test, and mechanical test. Upon culture with mouse bone marrow stem cells (mBMSCs), proliferation and osteogenic differentiation of mBMSC were evaluated using quantitative dsDNA analysis and alkaline phosphatase (ALP) activity, respectively.

Results

The addition of DBP improved the physicochemical and mechanical properties of the scaffold and formed a large amount of hydroxyapatite (HAp). Also, cell proliferation and differentiation were increased by enhancing cell adhesion.

Conclusion

The porous PCL/DBP scaffolds could provide a favorable microenvironment for cell adhesion and be a promising biomaterial model for bone tissue engineering.

Graphical abstract

Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide

BACKGROUND

Currently used synthetic bone graft substitutes (BGS) are either too weak to bear the principal load or if metallic, they can support loading, but can lead to stress shielding and are unable to integrate fully. In this study, we developed biocompatible, 3D printed scaffolds derived from µCT images of the bone that can overcome these issues and support the growth of osteoblasts.

METHODS

Cylindrical scaffolds were fabricated with acrylonitrile butadiene styrene (ABS) and Stratasys^® MED 610 (MED610) materials. The 3D-printed scaffolds were seeded with Mus musculus calvaria cells (MC3T3). After the cells attained confluence, osteogenesis was induced with and without the addition of calcitonin receptor fragment peptide (CRFP) and the bone matrix production was analyzed. Mechanical compression testing was carried out to measure compressive strength, stiffness, and elastic modulus.

RESULTS

For the ABS scaffolds, there was a 9.8% increase in compressive strength (p < 0.05) in the scaffolds with no pre-coating and the treatment with CRFP, compared to non-treated scaffolds. Similarly, MED610 scaffolds treated with CRFP showed an 11.9% (polylysine pre-coating) and a 20% (no pre-coating) increase (p < 0.01) in compressive strength compared to non-treated scaffolds.

CONCLUSIONS

MED610 scaffolds are excellent BGS as they support osteoblast growth and show enhanced bone growth with enhanced compressive strength when augmented with CRFP.

Osteoformation potential of an allogenic partially demineralized bone matrix in critical-size defects in the rat calvarium

Allogenic demineralized bone matrix has been developed as a reliable alternative to the autologous bone graft. In the present study, we assessed the osteoformation potential of a partially demineralized bone matrix (PDBM) in a paste form obtained without an added carrier. This formulation included the preparation of cancelous bone from femoral heads after decellularision, delipidation, demineralization in HCl and autoclaving at 121 °C. Structural and biochemical characteristics of PDBM were determined using FTIR (Fourier transform infrared spectroscopy), hydroxyproline, DNA content assays, and optical ellipsometry. The osteoformation potential was evaluated in 8-, 6-, and 4-mm-diameter rat-calvarial bone defects by in vivo micro-CT analysis, performed immediately after surgery on days 0, 15, 30, 45, and 60. Moreover, histological and histomorphometric analyses were done on day 60. PDBM was compared to cancelous bone powder (BP) before its partial demineralization. The expression levels of selected inflammation-, angiogenesis-, and bone-related genes were also investigated by RT-PCR, 3, 7, and 14 days after surgery. Compared to the control group, the PDBM group exhibited a significant increase (p < 0.05) in radiopacity in 8-mm- and 6-mm-diameter defects at all time points tested. On day 60, the amount of newly-formed bone was greater (16 and 1.6 folds; p < 0.001; respectively) compared to that in control defects. No bone formation was observed in defects filled with BP regardeless of the size. In 8-mm-diameter defect, PDBM was effective enough to induce the upregulation of genes pertinent to inflammation (i.e., TNFα, IL-6, and IL-8), angiogenesis (i.e., VEGF, VWF), and osteogenesis (ALP, RUNX2, BGLAP, SP7) by day 3 after surgery. This study showed that the tested PDBM deeply influences the early critical events involved in bone regeneration and exhibits efficient osteoformation capacity, making it an attractive graft option for treating defects in periodontal and maxillofacial areas.

Demineralized Bone Matrix in Spine Surgery: A Review of Current Applications and Future Trends

BACKGROUND

Graft augmentation for spinal fusion is an area of continued interest, with a wide variety of available products lacking clear recommendations regarding appropriate use. While iliac crest autograft has long been considered the "gold standard", suboptimal fusion rates along with harvest-related concerns continue to drive the need for graft alternatives. There are now multiple options of products with various characteristics that are available. These include demineralized bone matrix (DBM) and demineralized bone fibers (DBF), which have been used increasingly to promote spine fusion. The purpose of this review is to provide an updated narrative on the use of DBM/DBF in spine surgery.

METHODS

Literature review.

RESULTS

The clinical application of DBM in spine surgery has evolved since its introduction in the mid-1900s. Early preclinical studies demonstrated its effectiveness in promoting fusion. When used in the cervical, thoracic, and lumbar spine, more recent clinical data suggest similar rates of fusion compared with autograft, although clinical studies are primarily limited to level III or IV evidence with few level I studies. However, significant variability in surgical technique and type of product used in the literature limits its interpretation and overall application.

CONCLUSIONS

DBM and DBF are bone graft options in spine surgery. Most commonly used as graft extenders, they have the ability to increase the volume of traditional grafting techniques while potentially inducing new bone formation. While the literature supports good fusion rates when used in the lumbar spine and when used with adjuvant cages or additional grafting techniques in the cervical spine, care should be taken when using as a stand-alone product. As new literature emerges, DBM and DBF can be a useful method in a surgeon's armamentarium for fusion-based procedures.

Allografts and Spinal Fusion

BACKGROUND

Back pain is a common chief complaint within the United States and is caused by a multitude of etiologies. There are many different treatment modalities for back pain, with a frequent option being spinal fusion procedures. The success of spinal fusion greatly depends on instrumentation, construct design, and bone grafts used in surgery. Bone allografts are important for both structural integrity and providing a scaffold for bone fusion to occur.

METHOD

Searches were performed using terms "allografts" and "bone" as well as product names in peer reviewed literature Pubmed, Google Scholar, FDA-510k approvals, and clinicaltrials.gov.

RESULTS

This study is a review of allografts and focuses on currently available products and their success in both animal and clinical studies.

CONCLUSION

Bone grafts used in surgery are generally categorized into 3 main types: autogenous (from patient's own body), allograft (from cadaveric or living donor), and synthetic. This paper focuses on allografts and provides an overview on the different subtypes with an emphasis on recent product development and uses in spinal fusion surgery.

Understanding the Future Prospects of Synergizing Minimally Invasive Transforaminal Lumbar Interbody Fusion Surgery with Ceramics and Regenerative Cellular Therapies

Transforaminal lumber interbody fusion (TLIF) is the last resort to address the lumber degenerative disorders such as spondylolisthesis, causing lower back pain. The current surgical intervention for these abnormalities includes open TLIF. However, in recent years, minimally invasive TLIF (MIS-TLIF) has gained a high momentum, as it could minimize the risk of infection, blood loss, and post-operative complications pertaining to fusion surgery. Further advancement in visualizing and guiding techniques along with grafting cage and materials are continuously improving the safety and efficacy of MIS-TLIF. These assistive techniques are also playing a crucial role to increase and improve the learning curve of surgeons. However, achieving an appropriate output through TLIF still remains a challenge, which might be synergized through 3D-printing and tissue engineering-based regenerative therapy. Owing to their differentiation potential, biomaterials such as stem/progenitor cells may contribute to restructuring lost or damaged tissues during MIS-TLIF, and this therapeutic efficacy could be further supplemented by platelet-derived biomaterials, leading to improved clinical outcomes. Thus, based on the above-mentioned strategies, we have comprehensively summarized recent developments in MIS-TLIF and its possible combinatorial regenerative therapies for rapid and long-term relief.

Caprine demineralized bone matrix (DBMc) in the repair of non-critical bone defects in rabbit tibias. A new bone xenograft

Purpose

To evaluate the use of demineralized bone matrix of caprine origin in experimental bone defects of the tibia in New Zealand rabbits.

Methods

Fragments of the tibia diaphysis were collected aseptically from clinically healthy goats. The bones were sectioned into 1 cm fragments and stored at -20°C for subsequent hydrochloric acid (HCL) demineralization. A 70 mg portion of DBMc was used to fill the experimental bone defects. Twenty-four female adult New Zealand rabbits were divided into 2 groups: the MG (matrix group, left tibia) and CG (control group, right tibia). Additionally, they were separated into 4 groups with 6 animals, according to the period of analysis (15, 30, 60 and 90 days postoperatively). Using microCT, volumetric parameters were evaluated: bone volume, relationship between bone volume and total volume, bone surface area, relationship between bone surface area and total volume, number of trabeculae, trabecular thickness and trabecular separation.

Results

There was a statistically significant difference (P<0.05) between groups considering bone volume (BV) and bone:total volume (BV/TV), on 15, 30 and 90 days postoperatively. Control group showed a statistically significant superiority (P < 0.05) considering the mean of the variables bone surface (BS), number of trabeculae (Tb.N) and between bone surface and total volume (BS/TV) at 15 and 90 days.

Conclusions

Caprine demineralized bone matrix was safe and tolerable. No signs of material rejection were seen macroscopically. It is an alternative for the treatment of bone defects when autologous graft is not available or in insufficient quantities.