SPME-GC-MS and FTIR-ATR Spectroscopic Study as a Tool for Unifloral Common Greek Honeys’ Botanical Origin Identification

Physicochemical parameters, microbiological quality, and antibacterial activity of honey from the Bucovina region of Romania

In this study, the physicochemical properties (electrical conductivity (EC), pH, free acidity, moisture content, DPPH radical scavenging activity, total polyphenols content (TPC), flavonoids content (FC), individual polyphenols, carbohydrates, and organic acids), microbiological quality, and antibacterial activity of honey (raspberry, rosehip, alfalfa, hawthorn, and honeydew honey) from Bucovina were evaluated. Along with melissopalynological analysis, the physicochemical parameters were determined for the honey samples to characterize the samples and to assess their applicability in classifying honey based on its botanical origin. Another objective of the study was the evaluation of the microbiological quality and antibacterial activity of honey samples. The antibacterial activity was examined against the growth of four pathogenic bacterial strains (Staphylococcus aureus ATCC 29213, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Salmonella enterica serovar Typhimurium ATCC 14028) by the diffusion test in the agar well and by determining the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The analyzed honey samples were within the safe limits, except for three samples in which Bacillus cereus was detected and two other samples that had values above the acceptable limit for yeasts. Thus, 40.46% of all honey samples had bactericidal activity that was superior or at least comparable to manuka honey MGO550 against Staphylococcus aureus, 57.69% against Salmonella enterica serovar Typhimurium, 74.15% against Pseudomonas aeruginosa, and 75% against Escherichia coli. Of all types of honey analyzed in this study, honeydew honey had the highest bactericidal activity, followed by polyfloral honey.

Development and validation of a high-throughput headspace solid-phase microextraction gas chromatography-mass spectrometry methodology for target and suspect determination of honey volatiles

The determination of volatile compounds is essential for the chemical characterisation of honey's aroma and its correlation to its sensory profile and botanical origin. The present study describes the development, optimization and validation of a new, simple and reliable method for the determination of volatile compounds in honey using headspace solid-phase microextraction combined with gas chromatography/mass spectrometry (HS-SPME-GC-MS). The optimization of the SPME conditions showed that the ratio of honey: water (2:1) and the incubation temperature (60 °C) are the most critical parameters. Gas chromatography was performed with medium polar Varian CP-Select 624 column and the experimental Retention Index for a number of compounds was determined as an additional identification feature for suspect analysis. The simultaneous use of four internal standards chlorobenzene, benzophenone, 2-pentanol and 4-methyl-2-pentanone and matrix matched calibration enhanced method accuracy achieving recoveries 73-114 % and repeatability ranging between 3.9 and 19 % relative standard deviations. Furthermore, the superiority of the HS-SPME to static head space technique was verified exhibiting four-to nine-fold higher sensitivity. Target and suspect screening were applied to 30 Greek honey samples and 53 volatile compounds belonging to different chemical classes, such as alkanes, aldehydes, ketones, alcohols, and esters were identified with quantified concentrations ranging between 3.1 μg kg-1 (Limonene) up to 20 mg kg-1 (Benzeneacetaldehyde). Among the new findings is the detection of Myrtenol in Greek pine honey and 2,3-butanediol in Greek oak honey. The developed analytical protocol can be a valuable tool in order to chemically characterize honey based on the volatile content.

Rapid, reliable and easy-to-perform chemometric-less method for rice syrup adulterated honey detection using FTIR-ATR

The adulteration of honey (Apis mellifera) is a global problem due to its economic, commercial and health implications. The world's leading beekeeping organisation, APIMONDIA, considers that the detection of adulteration in honey is a problem that has not yet been resolved. This evidence of the importance of the intensive development of analytical techniques that allow the unequivocal detection of adulterants in honey, especially those whose use as honey adulterants has recently emerged. This work aims to develop a fast, easy-to-perform, low-cost analytical method to qualitatively and quantitatively determine rice syrup using the Fourier transform infrared spectroscopy (FTIR) technique with attenuated total reflectance (ATR) mode without complex mathematical procedures and sophisticated sample preparation. This study involved the analysis of 256 intentionally rice-syrup-adulterated honey samples and 92 pure honey samples of bee multifloral honey from Spain. The method, based strictly on the determination of the absorbance directly from the samples, at 1013 cm^-1 The methodology used no need for previous treatments or preparations and demonstrated the scope for the unequivocal detection of rice syrup in adulterated honey containing equal to or higher than 3% (m/m) or more of this adulterant. Using the Exponential Plus Linear model (r = 0.998) shows high accuracy and precision, in terms of relative error (0.32%, m/m) and coefficient of variation (1.4%). The results of this study have led to the establishment of a maximum absorbance threshold of 0.670 for honey without rice syrup.

Solid-phase microextraction Arrow combined with comprehensive two-dimensional gas chromatography-mass spectrometry for the elucidation of the volatile composition of honey samples

In this work, a solid-phase microextraction (SPME) Arrow method combined with comprehensive two-dimensional gas chromatography-mass spectrometry (GC × GC-MS) was developed for the elucidation of the volatile composition of honey samples. The sample preparation protocol was optimized to ensure high extraction efficiency of the volatile organic compounds (VOCs) which are directly associated with the organoleptic properties of honey and its acceptance by the consumers. Following its optimization, SPME Arrow was compared to conventional SPME in terms of sensitivity, precision, and number of extracted VOCs. The utilization of SPME Arrow fibers enabled the determination of 203, 147, and 149 compounds in honeydew honey, flower honey, and pine honey, respectively, while a significantly lower number of compounds (124, 94, and 111 for honeydew honey, flower honey, and pine honey, respectively) was determined using conventional SPME. At the same time, the utilization of SPME Arrow resulted in enhanced sensitivity and precision. All things considered, SPME Arrow and GC × GC-MS can be considered as highly suitable for the elucidation of the volatile composition of complex food samples resulting in high sensitivity and separation efficiency.

Unifloral Autumn Heather Honey from Indigenous Greek Erica manipuliflora Salisb.: SPME/GC-MS Characterization of the Volatile Fraction and Optimization of the Isolation Parameters

For long heather honey has been a special variety due to its unique organoleptic characteristics. This study aimed to characterize and optimize the isolation of the dominant volatile fraction of Greek autumn heather honey using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS). The described approach pointed out 13 main volatile components more closely related to honey botanical origin, in terms of occurrence and relative abundance. These volatiles include phenolic compounds and norisoprenoids, with benzaldehyde, safranal and p-anisaldehyde present in higher amounts, while ethyl 4-methoxybenzoate is reported for the first time in honey. Then, an experimental design was developed based on five numeric factors and one categorical factor and evaluated the optimum conditions (temperature: 60 °C, equilibration time: 30 min extraction time: 15 min magnetic stirrer velocity: 100 rpm sample volume: 6 mL water: honey ratio: 1:3 (v/w)). Additionally, a validation test set reinforces the above methodology investigation. Honey is very complex and variable with respect to its volatile components given the high diversity of the floral source. As a result, customizing the isolation parameters for each honey is a good approach for streamlining the isolation volatile compounds. This study could provide a good basis for future recognition of monofloral autumn heather honey.

Response Surface Methodology to Optimize the Isolation of Dominant Volatile Compounds from Monofloral Greek Thyme Honey Using SPME-GC-MS

This study aimed at an experimental design of response surface methodology (RSM) in the optimization of the dominant volatile fraction of Greek thyme honey using solid-phase microextraction (SPME) and analyzed by gas chromatography-mass spectrometry (GC-MS). For this purpose, a multiple response optimization was employed using desirability functions, which demand a search for optimal conditions for a set of responses simultaneously. A test set of eighty thyme honey samples were analyzed under the optimum conditions for validation of the proposed model. The optimized combination of isolation conditions was the temperature (60 °C), equilibration time (15 min), extraction time (30 min), magnetic stirrer speed (700 rpm), sample volume (6 mL), water: honey ratio (1:3 v/w) with total desirability over 0.50. It was found that the magnetic stirrer speed, which has not been evaluated before, had a positive effect, especially in combination with other factors. The above-developed methodology proved to be effective in the optimization of isolation of specific volatile compounds from a difficult matrix, like honey. This study could be a good basis for the development of novel RSM for other monofloral honey samples.

The Use of Right Angle Fluorescence Spectroscopy to Distinguish the Botanical Origin of Greek Common Honey Varieties

The standardization of the botanical origin of honey reflects the commercial value and quality of honey. Nowadays, most consumers are looking for a unifloral honey. The aim of the present study was to develop a novel method for honey classification using chemometric models based on phenolic compounds analyzed with right angle fluorescence spectroscopy, coupled with stepwise linear discriminant analysis (LDA). The deconstructed spectrum from three-dimensional-emission excitation matrix (3D-EEM) spectra provided a correct classification score of 94.9% calibration and cross-validation at an excitation wavelength (λex) of 330 nm. Subsequently, a score of 81.4% and 79.7%, respectively, at an excitation wavelength (λex) of 360 nm was achieved. Each chemometric model confirmed its power through the external validation with a score of 82.1% for both. Differentiation could be correlated with hydroxycinnamic and hydroxybenzoic acids, which absorb in this region of the spectrum. Fluorescence spectroscopy constitutes a rapid and sensitive technique, which, when combined with the stepwise algorithm and LDA method, can be used as a reliable and predictive authentication tool for honey. This study indicates that the developed methodology is a promising technique for determination of the botanical origin of common Greek honey varieties. Our long-term ambition is to support producers and suppliers to remain in a competitive national and international market.