Size Distribution, Bioaccessibility and Health Risks of Indoor/Outdoor Airborne Toxic Elements Collected from School Office Room

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation

BACKGROUND

In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

RESULTS

In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation.

SIGNIFICANCE

The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Mass size distributions, composition and dose estimates of particulate matter in Saharan dust outbreaks

The present study highlights the importance of examining the contribution of Saharan dust (SD) sources not only in terms of overall mass contribution but also in terms of composition, size distribution and inhaled dose. The effect of SD intrusions on PM and the respective major and trace metals mass concentrations and size distributions was investigated in a suburban site in Athens, Greece. SD events were associated, on average, with lower boundary layer heights (BLH) compared to the non-Sahara (nSD) dust days. During SD events, PM_1-10 concentrations showed an increasing trend with increasing atmospheric BLH, in contrary to the fine PM (PM₁). Generally, increased PM₁ and CO (i.e. anthropogenic origin) levels were observed for BLH lower than around 500 m. The average contribution of SD to PM₁₀ and PM_2.5 mass concentration was roughly equal to 30.9% and 19.4%, respectively. The mass size distributions of PM and specific major and trace elements (Na, Al, Si, S, Cl, K, Ca, Fe, and Zn) displayed a somewhat different behavior with respect to the mass origin (Algeria-Tunisia vs Libya-Egypt), affecting in turn the regional deposition of inhaled aerosol in the human respiratory tract (HRT). The average PM deposited mass in the upper and lower HRT was 80.1% (Head) and 26.9% (Lung; Tracheobronchial and Pulmonary region) higher for SD days than for nSD days. Higher doses were estimated in the upper and lower HRT for the majority of the elements, when SD intrusions occurred, supporting the increasingly growing interest in exploring the health effects of SD. Only the mass deposition for S, and Na in the lower HRT and Zn in the upper HRT was higher in the case of nSD.

Indoor air pollutant health prioritization in office buildings

This work presents an original method to identify priority indoor air pollutants in office buildings. It uses both a chronic risk assessment approach by calculating a hazard quotient, and a hazard classification method based on carcinogenic, mutagenic, reprotoxic, and endocrine disruptive effects. A graphical representation of the results provides a comprehensive and concise visualization of all of the information, including the number of buildings where each substance was measured, an indicator of exposure data robustness. Seventy-one out of 342 substances (20%) for which indoor air concentrations have already been measured in office buildings were identified as priority pollutants. The results were compared to previous prioritization studies in various types of indoor environments to assess the reliability of the method and highlight its advantages. Sensitivity analyses were performed to reduce the geographical scope (OECD countries only), time scope (after 2010 only), and measurement duration (working hours only) and showed little influence on the results. Finally, 123 additional substances that could be present in office indoor air but could not be assessed due to the lack of measurement data are proposed for future monitoring surveys to update the prioritization of indoor air pollutants in offices.

Heavy metals in indoor dust: Spatial distribution, influencing factors, and potential health risks

Given the large proportion of time that people spend indoors, the potential health risks posed by heavy metals in the indoor environment deserve greater attention. A global-scale assessment of heavy metal contamination in indoor dust was conducted in this study based on >127 articles published between 1985 and 2019. The pollution levels, spatio-temporal variations, sources, bioaccessibilities, influencing factors, and health risks of heavy metals associated with indoor dust were analyzed. Children's blood lead levels (BLLs) were also estimated using the integrated exposure uptake biokinetic model. The results indicated that the median concentrations of Cu and Zn in 71.9% and 71.0% of the study sites surpassed the corresponding permissible limits, 100 and 300 mg/kg, respectively; thus, their control should be given priority. Heavy metal concentrations in indoor dust from different areas of the world varied greatly, which was closely associated with the type of local human activities, such as mining, melting, e-waste recycling and Pb-related industries. The bioaccessibilities of some key elements, e.g., Pb, Cd, Cu, and Zn, in household dust were high. The levels of heavy metals in indoor dust were mainly affected by a combination of outdoor and indoor sources and related critical factors, and future studies should focus on quantifying the contributions of different sources. Based on the health risk assessment, dust Pb exposure is a major health concern in e-waste recycling areas, which warrants greater attention. 49.8%, 36.8% and 14.4% of study sites showed BLLs exceeding 35 μg/L (threshold limit in Germany), 50 μg/L (threshold limit in the USA), or 100 μg/L (threshold limit in China), respectively. Finally, Pb exposure from indoor dust represents a major contributor to children's blood Pb poisoning in many developing countries. This study details the overall heavy metal contamination status of indoor dust and provides insights for policymakers with respect to pollution prevention measures.

Particle-induced oxidative damage by indoor size-segregated particulate matter from coal-burning homes in the Xuanwei lung cancer epidemic area, Yunnan Province, China

Size-segregated samples of airborne particulate matter were collected at the coal-burning homes of the Hutou high lung cancer epidemic village and a comparison site Xize village of the Xuanwei County, Yuanan Province, by an Anderson Cascade Impact Sampler in winter and spring to study the toxicological characteristics of different-sized particles. The DNA damage caused by the water-soluble fractions of these size-segregated particles was analyzed by the plasmid scission assay, and the trace element compositions were determined by Inductively Coupled Plasma Mass Spectrometry. The DNA damage rate from the airborne particles in the high lung cancer incidence area was higher than that in Xize village. The different-sized particles have highly varying DNA damage rates, with the values being greater in the small size range than in the large size range. The particle-induced DNA damage rates had a significantly positive correlation with total water-soluble trace elements. Further analysis of the individual elements indicated that the water-soluble heavy metals Zn, Cu, Cd, Rb, Cs, and Sb had a positive correlation with the particle-induced DNA damage, implying that these water-soluble heavy metals played an important role in the DNA damage. The Sr had a negative correlation with the particle-induced DNA damage, suggesting that the water-soluble Sr might counter DNA damage. The mass concentrations of the total and individual water-soluble trace elements were mostly enriched in the small particle size ranges, thus implying the indoor airborne particles in the small size ranges would have a higher health risk.

Atomic Absorption Spectrometry Methods to Access the Metal Solubility of Aerosols in Artificial Lung Fluid

Recent studies to quantify the health risks that fine particulate matter with an aerodynamic less than 2.5 µm (PM_2.5) pose use in vitro approaches. One of these approaches is to incubate PM_2.5 in artificial lysosomal fluid for a given period at body temperature. These body fluids used have a high ionic strength and as such can be challenging samples to analyze with atomic spectroscopy techniques. As PM_2.5 is a primary health hazard because it is tiny enough to penetrate deep into the lungs and could, in addition, dissolve in the lung fluid it is important to quantify elements of toxic and/or carcinogenic concerns, reliably and accurately. Sophisticated instrumentation and expensive pre-treatment of challenging samples are not always available, especially in developing countries. To evaluate the applicability of graphite furnace atomic absorption spectrometry (GFAAS) without Zeeman correction capability to detect trace quantities of heavy metals leached from PM_2.5 on to artificial lung fluid, univariate and multivariate approaches have been used for optimization purposes. The limits of quantification, LOQ, obtained by the optimized method were: 2 µg L^-1 (Cu), 3 µg L^-1 (Cr), 1 µg L^-1 (Mn), and 10 µg L^-1 (Pb). The addition/recovery experiments had a mean accuracy of: (Cu) 99 ± 7%; 110 ± 8% (Cr); 95 ± 9% (Mn), and 96 ± 11% (Pb). The average soluble fractions of PM_2.5 incubated in artificial lysosomal fluid (ALF) for 1 h were: 1.2 ± 0.01 ng m^-3 Cu, 0.4 ± 0.01 ng m^-3 Cr, 0.6 ± 0.01 ng m^-3 Mn, and 4.8 ± 0.03 ng m^-3 Pb. Using historical elemental averages of PM_2.5 in Curitiba (Cu 3.3 ng m^-3, Cr 2.1 ng m^-3, Mn 6.1 ng m^-3, Pb 21 ng m^-3), the percentage bioaccessibility were determined to be Cu 38%, Cr 20%, Mn 10%, and Pb 23%. The elemental values of the atmospheric soluble fraction of Cu, Cr, and Mn were below the inhalation risk concentrations. However, for Pb, the atmospheric soluble fraction exceeded the inhalation unit risk of 0.012 ng m^-3. This robust and straightforward GF AAS method is pivotal for low and middle-income countries were most air pollution adverse effects occur and established lower-cost technologies are likely unavailable.