A Standardised Approach to the Biomechanical Evaluation of Tracheal Grafts

Decellularization techniques: unveiling the blueprint for tracheal tissue engineering

Certain congenital or acquired diseases and defects such as tracheo-oesophageal fistula, tracheomalacia, tracheal stenosis, airway ischemia, infections, and tumours can cause damage to the trachea. Treatments available do not offer any permanent solutions. Moreover, long-segment defects in the trachea have no available surgical treatments. Tissue engineering has gained popularity in current regenerative medicine as a promising approach to bridge this gap. Among the various tissue engineering techniques, decellularization is a widely used approach that removes the cellular and nuclear contents from the tissue while preserving the native extracellular matrix components. The decellularized scaffolds exhibit significantly lower immunogenicity and retain the essential biomechanical and proangiogenic properties of native tissue, creating a foundation for trachea regeneration. The present review provides an overview of trachea decellularization advancements, exploring how recellularization approaches can be optimized by using various stem cells and tissue-specific cells to restore the scaffold's structure and function. We examine critical factors such as mechanical properties, revascularization, and immunogenicity involved in the transplantation of tissue-engineered grafts.

Biomechanical evaluation of a sheep tracheal scaffold

Tissue engineering is a set of techniques for producing or reconstructing tissue that primarily aims to restore or improve the function of tissues in the human body. The aim of the present study was to evaluate the mechanical and histological characteristics of decellularized tracheal scaffolds prepared in comparison with fresh trachea for use in tracheal repair. In order to prepare the scaffold, sheep's trachea was prepared and after cleaning the waste tissues, they were decellularized. Then decellularized scaffolds were evaluated histologically and laboratory and numerical study of the nonlinear mechanical behavior of tracheal tissue and scaffold and their comparison. Examining the results of histological evaluations showed that the decellularization of the scaffolds was completely done. These results were confirmed by hematoxylin-eosin staining. Also, the exact hyperelastic properties of tracheal tissue and scaffold were used in biomechanical models, and according to the presented results, the five-term Mooney-Rivlin strain energy density function became a suitable behavioral model for modeling the hyperelastic behavior of trachea and scaffold. In total, the results of this research showed that the scaffolds obtained from decellularization by preserving the main compositions of the desired tissue can be a suitable platform for investigating cell behaviors.

Global Bibliometric and Visualized Analysis of Tracheal Tissue Engineering Research

The development of tracheal tissue engineering (TTE) has seen a rapid growth in recent years. The purpose of this study was to investigate the global status, trends, and hotspots of TTE research based on bibliometrics and visualization analysis. Publications related to TTE were retrieved and included in the Web of Science Core Collection. VOSviewer and CiteSpace were used to generate knowledge maps. Six hundred fifty-five publications were identified, and the quantity of the annual publications worldwide was on the increase. International collaboration is a widespread reality. The United States led the world in the field of trachea tissue engineering, whereas University College London was the institution with the greatest contribution. In addition, Biomaterials had a great influence in this field, attracting the largest number of papers. Moreover, the topics of TTE research largely concentrated on the biomechanical scaffold preparation, the vascularization and epithelialization of scaffold, the tracheal cartilage regeneration, and the tissue-engineered tracheal transplantation. And the research on the application of decellularization and 3D printing for the construction of a tissue-engineered trachea was likely to receive more widespread attention in the future. Impact statement In recent years, tracheal tissue engineering (TTE) has experienced rapid growth. In this study, we investigated the worldwide status and trends of TTE research, and revealed the countries, institutions, journals, and authors that had made significant contributions to the field of TTE. Moreover, the possible research hotspots in the future were predicted. According to our research, researchers can gain a better understanding of the trends in this field, and stay informed of the most current research by tracking key journals, institutions, and authors.

Current Strategies for Tracheal Decellularization: A Systematic Review

The process of decellularization is crucial for producing a substitute for the absent tracheal segment, and the choice of agents and methods significantly influences the outcomes. This paper aims to systematically review the efficacy of diverse tracheal decellularization agents and methods using the PRISMA flowchart. Inclusion criteria encompassed experimental studies published between 2018 and 2023, written in English, and detailing outcomes related to histopathological anatomy, DNA quantification, ECM evaluation, and biomechanical characteristics. Exclusion criteria involved studies related to 3D printing, biomaterials, and partial decellularization. A comprehensive search on PubMed, NCBI, and ScienceDirect yielded 17 relevant literatures. The integration of various agents and methods has proven effective in the process of tracheal decellularization, highlighting the distinct advantages and drawbacks associated with each agent and method.

A facile 3D bio-fabrication of customized tubular scaffolds using solvent-based extrusion printing for tissue-engineered tracheal grafts

Tracheal implantation remains a major therapeutic challenge due to the unavailability of donors and the lack of biomimetic tubular grafts. Fabrication of biomimetic tracheal scaffolds of suitable materials with matched rigidity, enhanced flexibility and biocompatibility has been a major challenge in the field of tracheal reconstruction. In this study, customized tubular grafts made up of FDA-approved polycaprolactone ( PCL ) and polyurethane ( PU ) were fabricated using a novel solvent-based extrusion 3D printing. The printed scaffolds were investigated by various physical, thermal, and mechanical characterizations such as contact angle measurement, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), radial compression, longitudinal compression, and cyclic radial compression. In this study, the native goat trachea was used as a reference for the fabrication of different types of scaffolds (cylindrical, bellow-shaped, and spiral-shaped). The mechanical properties of the goat trachea were also compared to find suitable formulations of PCL / PU . Spiral-shaped scaffolds were found to be an ideal shape based on longitudinal compression and torsion load maintaining clear patency. To check the long-term implantation, in vitro degradation test was performed for all the 3D printed scaffolds and it was found that blending of PU with PCL reduced the degradation behavior. The printed scaffolds were further evaluated for biocompatibility assay, live/dead assay, and cell adhesion assay using bone marrow-derived human mesenchymal stem cells (hMSCs). From biomechanical and biological assessments, PCL 70 / PU 30 of spiral-shaped scaffolds could be a suitable candidate for the development of tracheal regenerative applications.

The Growing Medical Need for Tracheal Replacement: Reconstructive Strategies Should Overcome Their Limits

Breathing, being predominantly an automatic action, is often taken for granted. However, respiratory diseases affect millions of people globally, emerging as one of the major causes of disability and death overall. Among the respiratory dysfunctions, tracheal alterations have always represented a primary challenge for clinicians, biologists, and engineers. Indeed, in the case of wide structural alterations involving more than 50% of the tracheal length in adults or 30% in children, the available medical treatments are ineffective or inapplicable. So far, a plethora of reconstructive approaches have been proposed and clinically applied to face this growing, unmet medical need. Unfortunately, none of them has become a well-established and routinely applied clinical procedure to date. This review summarizes the main clinical reconstructive attempts and classifies them as non-tissue engineering and tissue engineering strategies. The analysis of the achievements and the main difficulties that still hinder this field, together with the evaluation of the forefront preclinical experiences in tracheal repair/replacement, is functional to promote a safer and more effective clinical translation in the near future.

Thomas L, Nair PD. Assessing the 3D Printability of an Elastomeric Poly(caprolactone-co-lactide) Copolymer as a Potential Material for 3D Printing Tracheal Scaffolds

The advent of 3D printing technology has made remarkable progress in the field of tissue engineering. Yet, it has been challenging to reproduce the desired mechanical properties of certain tissues by 3D printing. This was majorly due to the lack of 3D printable materials possessing mechanical properties similar to the native tissue. In this study, we have synthesized four different ratios of poly(caprolactone-co-lactide (PLCL) and tested their 3D printing capabilities. The physicochemical properties of the material were characterized using Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, the mechanical properties were assessed using the universal testing machine (UTM). The ratio with the higher lactide content was found to have better printability. Out of the different ratios assessed, a suitable ratio having the desired mechanical properties and printability was identified and 3D printed into a tracheal scaffold. Thus, PLCL can be a potential material for 3D printing of tissues like the trachea.