Preparation of Carbon-Based Solid Acid Catalysts Using Rice Straw Biomass and Their Application in Hydration of α-Pinene

A Two-Step SO3H/ICG Catalyst Synthesis for Biodiesel Production: Optimization of Sulfonation Step via Microwave Irradiation

Conventional heating, a common method used for heterogeneous solid acid catalyst synthesis unknowingly consumes massive time and energy. In this study, acid catalyst was prepared through sulfonation process of incomplete carbonized glucose (ICG) via microwave-assisted technique to shorten the heating time and energy consumption. Optimization of the sulfonation process of ICG via microwave-assisted was carried out. Four-factor-three-level central composite design (CCD) was used to develop the design of experiments (DOE). Interaction between two factors was evaluated to determine the optimum process conditions. A quadratic model was proposed for prediction of biodiesel yield (Y) from palm fatty acid distillate (PFAD) and its conversion (C). The application of DOE successfully optimized the operating conditions for the two-step SO3H/ICG catalyst synthesis to be used for the esterification process. The optimized conditions of the best performing SO3H/ICG with maximum Y and C were at 7.5 minutes of reaction time, 159.5 mL of H2SO4 used, 671 rpm of stirring rate as well as 413.64 watt of power level. At these optimum conditions the predicted yield percentage and conversion percentage were 94.01% and 91.89%, respectively, which experimentally verified the accuracy of the model. The utilization of sulfonated glucose solid acid catalyst via microwave-assisted in biodiesel production has great potential towards sustainable and green method of synthesizing catalyst for biodiesel. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Potassium Alum [KAl(SO4)2∙12H2O] solid catalyst for effective and selective methoxylation production of alpha-pinene ether products

Methoxylation is a relevant technological process applied in the production of high-value α-pinene derivatives. This report investigates the use of potassium alum [KAl(SO₄)₂ · 12H₂O] as a catalyst in the methoxylation of α-pinene. In this study, the methoxylation reaction was optimized for the highest conversion of α-pinene and selectivity, assessed for the factors, catalyst loading (0.5; 1.0; and 1.5 g), volume ratio of α-pinene: methanol (1:4, 1:7, 1:10), reaction temperature (50, 55, 60 and 65 °C), and reaction time (72, 144, 216, 288, 360 min). The highest selectivity of KAl(SO₄)₂∙12H₂O in the methoxylation of α-pinene was achieved under an optimal condition of 1 g of catalyst loading, volume ratio of 1:10, as well as the reaction temperature and incubation time of 65 °C and 6 h, respectively. GC–MS results revealed the yields of the methoxylated products from the 98.2% conversion of α-pinene, to be 59.6%, 8.9%, and 7.1% for α-terpinyl methyl ether (TME), fenchyl methyl ether (FME), bornyl methyl ether (BME), respectively. It was apparent that a lower KAl(SO₄)₂∙12H₂O loading (0.5–1.5 g) was more economical for the methoxylation reaction. The findings seen here indicated the suitability of the KAl(SO₄)₂ · 12H₂O to catalyze the methoxylation of α-pinene to produce an commercially important ethers.

Synthesis of lignin-carbohydrate complex-based catalyst from Eragrostis tef straw and its catalytic performance in xylose dehydration to furfural

A new catalyst was successfully prepared by functionalization of the lignin-carbohydrate complex structure in the Eragrostis tef straw via simultaneous carbonization and sulfonation. The physical and chemical properties of the surface of the synthesized catalyst were checked by FTIR and XRD. The FTIR results indicate the prepared catalyst exhibited functional groups such as -SO₃H, -COOH, and -OH. The synthesis conditions like the temperature and time of carbonization and sulfonation showed significant effect the amount of the strong acid doped into the carbonized lignin-carbohydrate matrix. The newly prepared catalyst was checked for dehydration of xylose to furfural and revealed of course that it has the potential. The maximum yield of furfural 62.4% was achieved and the catalyst showed excellent reusability for 5 runs without significant loss of catalystic activity. The use of catalysts prepared from Eragrostis tef straw is a green strategy for converting xylose to furfural, as these catalysts are solving the problems associated with the use of mineral acid catalysts.