Use of Co/Fe-Mixed Oxides as Heterogeneous Catalysts in Obtaining Biodiesel

Microwave-Assisted Biodiesel Production Using UiO-66 MOF Derived Nanocatalyst: Process Optimization Using Response Surface Methodology

The present work is on the transesterification of soybean oil to biodiesel under microwave irradiation using a biomass and MOF−derived CaO−ZrO2 heterogeneous catalyst. The optimisation of different parameters was processed by adopting a central composite design for a response−surface methodology (RSM). The experimental data were fitted to a quadratic equation employing multiple regressions and investigated by analysis of variance (ANOVA). The catalyst was exhaustively characterised by XRD, TGA, FTIR BET, SEM, TEM, CO2 TPD and XPS. In addition, the synthesized biodiesel was characterized by 1H and 13C NMR, GCMS. The physicochemical properties of the biodiesel were also reported and compared with the ASTM standards. The maximum yield that was obtained after optimization using RSM was 97.22 ± 0.4% with reaction time of 66.2 min, at reaction temperature of 73.2 °C, catalyst loading of 6.5 wt.%, and methanol−to−oil ratio of 9.7 wt.%.

The Catalysed Transformation of Vegetable Oils or Animal Fats to Biofuels and Bio-Lubricants: A Review

This review paper summarizes the current state-of-the-art of the chemical transformation of oils/fats (i.e., triacylglycerols) to the use of biofuels or bio-lubricants in the means of transport, which is a novelty. The chemical transformation is necessary to obtain products that are more usable with properties corresponding to fuels synthesized from crude oil. Two types of fuels are described—biodiesel (the mixture of methyl esters produced by transesterification) and green diesel (paraffins produced by hydrogenation of oils). Moreover, three bio-lubricant synthesis methods are described. The transformation, which is usually catalysed, depends on: (i) the type and composition of the raw material, including alcohols for biodiesel production and hydrogen for green diesel; (ii) the type of the catalyst in the case of catalysed reactions; (iii) the reaction conditions; and (iv) types of final products. The most important catalysts, especially heterogeneous and including reaction conditions, for each product are described. The properties of biodiesel and green diesel and a comparison with diesel from crude oil are also discussed.

A green approach for enhancing the hydrophobicity of UiO-66(Zr) catalysts for biodiesel production at 298 K

Recently, the incorporation of hydrophobicity on the surface of UiO-66(Zr) has received much attention due to the deactivation of hydrophilic active sites of UiO-66(Zr) upon water adsorption. In this work, we report UiO-66(Zr) catalysts with an assortment of surface hydrophobicities fabricated by the solvent-free method to elucidate the impact of the environment framing Lewis acid sites on their catalytic activity in the production of fatty acid methyl ester (biodiesel) via the esterification of fatty acids at room temperature with high selectivity (100%) and good recyclability. A detailed structural analysis of the materials by N₂ sorption, FT-IR, SEM, XRD, water contact angle measurement, dynamic liquid scattering (DLS), NMR and TGA revealed the fabrication of stearic acid-grafted UiO-66(Zr) catalysts (10SA/UiO-66) with fine particle size and a highly hydrophobic network. 10SA/UiO-66(Zr) with enhanced hydrophobicity exhibited superior catalytic performance in the esterification of a fatty acid with a long alkyl chain compared with conventional solid acid catalysts and even liquid acid catalysts. Detailed kinetic studies corroborated that the adsorption of lipophilic acids at the Lewis acid sites besides the enhancement of wettability between the reactants was facilitated by the hydrophobic environment, thus significantly motivating the esterification reaction at room temperature. Furthermore, 10SA/UiO-66(Zr) showed good catalytic activity in the esterification of oleic acid in the presence of water (∼10% in the light of acid weight).

Recently, the incorporation of hydrophobicity on the surface of UiO-66(Zr) has received much attention due to the deactivation of hydrophilic active sites of UiO-66(Zr) upon water adsorption.

Catalysis for Global Development. Contributions around the Iberoamerican Federation of Catalysis

Following biennial meetings held since 1968, the Iberoamerican Federation of Catalysis Societies (FISoCat), the Portuguese Chemical Society (SPQ) and the University of Coimbra jointly organized the XXVI Iberoamerican Congress on Catalysis (CICat 2018), which took place in the historic city of Coimbra, Portugal, between the 9th and 14th of September 2018 [...]

Advances in Nanocatalysts Mediated Biodiesel Production: A Critical Appraisal

The excessive consumption of petroleum resources leads to global warming, fast depletion of petroleum reserves, as well as price instability of gasoline. Thus, there is a strong need for alternative renewable fuels to replace petroleum-derived fuels. The striking features of an alternative fuel include the low carbon footprints, renewability and affordability at manageable prices. Biodiesel, made from waste oils, animal fats, vegetal oils, is a totally renewable and non-toxic liquid fuel which has gained significant attraction in the world. Due to technological advancements in catalytic chemistry, biodiesel can be produced from a variety of feedstock employing a variety of catalysts and recovery technologies. Recently, several ground-breaking advancements have been made in nano-catalyst technology which showed the symmetrical correlation with cost competitive biodiesel production. Nanocatalysts have unique properties such as their selective reactivity, high activation energy and controlled rate of reaction, easy recovery and recyclability. Here, we present an overview of various feedstock used for biodiesel production, their composition and characteristics. The major focus of this review is to appraise the characterization of nanocatalysts, their effect on biodiesel production and methodologies of biodiesel production.

Biodiesel-Derived Glycerol Obtained from Renewable Biomass-A Suitable Substrate for the Growth of Candida zeylanoides Yeast Strain ATCC 20367

Used kitchen oil represents a feasible and renewable biomass to produce green biofuels such as biodiesel. Biodiesel production generates large amounts of by-products such as the crude glycerol fraction, which can be further used biotechnologically as a valuable nutrient for many microorganisms. In this study, we transesterified used kitchen oil with methanol and sodium hydroxide in order to obtain biodiesel and crude glycerol fractions. The crude glycerol fraction consisting of 30% glycerol was integrated into a bioreactor cultivation process as a nutrient source for the growth of Candida zeylanoides ATCC 20367. Cell viability and biomass production were similar to those obtained with batch cultivations on pure glycerol or glucose as the main nutrient substrates. However, the biosynthesis of organic acids (e.g., citric and succinic) was significantly different compared to pure glycerol and glucose used as main carbon sources.