The Evolution of Complex Muscle Cell In Vitro Models to Study Pathomechanisms and Drug Development of Neuromuscular Disease

Recent trends in 3D bioprinting technology for skeletal muscle regeneration

Skeletal muscle is a pro-regenerative tissue, that utilizes a tissue-resident stem cell system to effect repair upon injury. Despite the demonstrated efficiency of this system in restoring muscle mass after many acute injuries, in conditions of severe trauma such as those evident in volumetric muscle loss (VML) (>20 % by mass), this self-repair capability is unable to restore tissue architecture, requiring interventions which currently are largely surgical. As a possible alternative, the generation of artificial muscle using tissue engineering approaches may also be of importance in the treatment of VML and muscle diseases such as dystrophies. Three-dimensional (3D) bioprinting has been identified as a promising technique for regeneration of the complex architecture of skeletal muscle. This review discusses existing treatment strategies following muscle damage, recent progress in bioprinting techniques, the bioinks used for muscle regeneration, the immunogenicity of scaffold materials, and in vitro and in vivo maturation techniques for 3D bio-printed muscle constructs. The pros and cons of these bioink formulations are also highlighted. Finally, we present the current limitations and challenges in the field and critical factors to consider for bioprinting approaches to become more translationa and to produce clinically relevant engineered muscle. STATEMENT OF SIGNIFICANCE: This review discusses the physiopathology of muscle injuries and existing clinical treatment strategies for muscle damage, the types of bioprinting techniques that have been applied to bioprinting of muscle, and the bioinks commonly used for muscle regeneration. The pros and cons of these bioinks are highlighted. We present a discussion of existing gaps in the literature and critical factors to consider for the translation of bioprinting approaches and to produce clinically relevant engineered muscle. Finally, we provide insights into what we believe will be the next steps required before the realization of the application of tissue-engineered muscle in humans. We believe this manuscript is an insightful, timely, and instructive review that will guide future muscle bioprinting research from a fundamental construct creation approach, down a translational pathway to achieve the desired impact in the clinic.

A knock down strategy for rapid, generic, and versatile modelling of muscular dystrophies in 3D-tissue-engineered-skeletal muscle

BACKGROUND

Human iPSC-derived 3D-tissue-engineered-skeletal muscles (3D-TESMs) offer advanced technology for disease modelling. However, due to the inherent genetic heterogeneity among human individuals, it is often difficult to distinguish disease-related readouts from random variability. The generation of genetically matched isogenic controls using gene editing can reduce variability, but the generation of isogenic hiPSC-derived 3D-TESMs can take up to 6 months, thereby reducing throughput.

METHODS

Here, by combining 3D-TESM and shRNA technologies, we developed a disease modelling strategy to induce distinct genetic deficiencies in a single hiPSC-derived myogenic progenitor cell line within 1 week.

RESULTS

As proof of principle, we recapitulated disease-associated pathology of Duchenne muscular dystrophy and limb-girdle muscular dystrophy type 2A caused by loss of function of DMD and CAPN3, respectively. shRNA-mediated knock down of DMD or CAPN3 induced a loss of contractile function, disruption of tissue architecture, and disease-specific proteomes. Pathology in DMD-deficient 3D-TESMs was partially rescued by a candidate gene therapy treatment using micro-dystrophin, with similar efficacy compared to animal models.

CONCLUSIONS

These results show that isogenic shRNA-based humanized 3D-TESM models provide a fast, cheap, and efficient tool to model muscular dystrophies and are useful for the preclinical evaluation of novel therapies.

Advanced Cellular Models for Rare Disease Study: Exploring Neural, Muscle and Skeletal Organoids

Organoids are self-organized, three-dimensional structures derived from stem cells that can mimic the structure and physiology of human organs. Patient-specific induced pluripotent stem cells (iPSCs) and 3D organoid model systems allow cells to be analyzed in a controlled environment to simulate the characteristics of a given disease by modeling the underlying pathophysiology. The recent development of 3D cell models has offered the scientific community an exceptionally valuable tool in the study of rare diseases, overcoming the limited availability of biological samples and the limitations of animal models. This review provides an overview of iPSC models and genetic engineering techniques used to develop organoids. In particular, some of the models applied to the study of rare neuronal, muscular and skeletal diseases are described. Furthermore, the limitations and potential of developing new therapeutic approaches are discussed.

Expression and electrophysiological characteristics of VGSC during mouse myoblasts differentiation

Voltage-gated sodium channels (VGSC) are essential for triggering and relaying action potentials (AP), which perform critical functions in a variety of physiological processes, such as controlling muscle contractions and facilitating the release of neurotransmitters. In this study, we used a mouse C2C12 cell differentiation model to study the molecular expression and channel dynamics of VGSC and to investigate the exact role of VGSC in the development of muscle regeneration. Immunofluorescence, Real-time quantitative polymerase chain reaction, Western blot, and whole-cell patch clamp were employed for this purpose in mouse myoblasts. The findings revealed an increase in intracellular sodium concentration, NaV1.4 gene expression, and protein expression with the progress of differentiation (days 0, 1, 3, 5 and 7). Furthermore, VGSC dynamics exhibit the following characteristics: ① The increase of sodium current (INa); ② The decrease in the activation threshold and the voltage trigger maximum of INa; ③ A positive shift in the steady-state inactivation curve; ④ The recovery of INa during repolarization is delayed, the activity-dependent decay rate of INa was accelerated, and the proportionate amount of the fraction of activated channels was reduced. Based on these results, it is postulated that the activation threshold of AP could be decreased, and the refractory period could be extended with the extension of differentiation duration, which may contribute to muscle contraction. Taken together, VGSC provides a theoretical and empirical basis for exploring potential targets for neuromuscular diseases and other therapeutic muscle regeneration dysfunctions.

The dorsal portion of the bovine diaphragm as a useful tissue for producing a 3D muscle scaffold

Three-dimensional (3D) organoids are an innovative approach to obtain an in vitro model for ex vivo studies to overcome the limitations of monolayer cell culture and reduce the use of animal models. An organoid of skeletal muscle requires the presence of the extracellular matrix to represent a functional muscle in vitro, which is why decellularized tissue is an optimal choice. Various muscles have been considered to produce a muscle organoid, most from rodents or small animals, and only recently some studies have been reported on the muscles of large animals. This work presents a muscular organoid produced from the bovine diaphragm, which has a peculiar multilayered structure with different fibre orientations depending on the considered area. This paper analyses the anatomical structure of the bovine diaphragm, selects the most appropriate portion, and presents a decellularization protocol for a multilayered muscle. In addition, a preliminary test of recellularization with primary bovine myocytes was presented with the future aim of obtaining a 3D muscle allogenic organoid, completely bovine-derived. The results demonstrate that the dorsal portion of bovine diaphragm presents a regular alternation of muscular and fibrous layers and that the complete decellularization does not affect the biocompatibility. These results provide a strong foundation for the potential application of this portion of tissue as a scaffold for in vitro studies of muscle organoids.

Cellular and Genomic Features of Muscle Differentiation from Isogenic Fibroblasts and Myoblasts

The ability to recapitulate muscle differentiation in vitro enables the exploration of mechanisms underlying myogenesis and muscle diseases. However, obtaining myoblasts from patients with neuromuscular diseases or from healthy subjects poses ethical and procedural challenges that limit such investigations. An alternative consists in converting skin fibroblasts into myogenic cells by forcing the expression of the myogenic regulator MYOD. Here, we directly compared cellular phenotype, transcriptome, and nuclear lamina-associated domains (LADs) in myo-converted human fibroblasts and myotubes differentiated from myoblasts. We used isogenic cells from a 16-year-old donor, ruling out, for the first time to our knowledge, genetic factors as a source of variations between the two myogenic models. We show that myo-conversion of fibroblasts upregulates genes controlling myogenic pathways leading to multinucleated cells expressing muscle cell markers. However, myotubes are more advanced in myogenesis than myo-converted fibroblasts at the phenotypic and transcriptomic levels. While most LADs are shared between the two cell types, each also displays unique domains of lamin A/C interactions. Furthermore, myotube-specific LADs are more gene-rich and less heterochromatic than shared LADs or LADs unique to myo-converted fibroblasts, and they uniquely sequester developmental genes. Thus, myo-converted fibroblasts and myotubes retain cell type-specific features of radial and functional genome organization. Our results favor a view of myo-converted fibroblasts as a practical model to investigate the phenotypic and genomic properties of muscle cell differentiation in normal and pathological contexts, but also highlight current limitations in using fibroblasts as a source of myogenic cells.

Slow or fast: Implications of myofibre type and associated differences for manifestation of neuromuscular disorders

Many neuromuscular disorders can have a differential impact on a specific myofibre type, forming the central premise of this review. The many different skeletal muscles in mammals contain a spectrum of slow- to fast-twitch myofibres with varying levels of protein isoforms that determine their distinctive contractile, metabolic, and other properties. The variations in functional properties across the range of classic 'slow' to 'fast' myofibres are outlined, combined with exemplars of the predominantly slow-twitch soleus and fast-twitch extensor digitorum longus muscles, species comparisons, and techniques used to study these properties. Other intrinsic and extrinsic differences are discussed in the context of slow and fast myofibres. These include inherent susceptibility to damage, myonecrosis, and regeneration, plus extrinsic nerves, extracellular matrix, and vasculature, examined in the context of growth, ageing, metabolic syndrome, and sexual dimorphism. These many differences emphasise the importance of carefully considering the influence of myofibre-type composition on manifestation of various neuromuscular disorders across the lifespan for both sexes. Equally, understanding the different responses of slow and fast myofibres due to intrinsic and extrinsic factors can provide deep insight into the precise molecular mechanisms that initiate and exacerbate various neuromuscular disorders. This focus on the influence of different myofibre types is of fundamental importance to enhance translation for clinical management and therapies for many skeletal muscle disorders.