Local Vibrational Mode Analysis of π–Hole Interactions between Aryl Donors and Small Molecule Acceptors

Spodium bonding with noble gas atoms

The nature of the bonding between a neutral group 12 member (Zn3, Cd3 and Hg3) ring and a noble gas atom was explored using quantum chemical simulations. Natural bond orbital, quantum theory of atoms in molecules, symmetry-adapted perturbation theory, and molecular electrostatic potential surface analysis were also used to investigate the type of interaction between the noble gas atom and the metal rings (Zn3, Cd3 and Hg3). The Zn3, Cd3 and Hg3 rings are bonded to the noble gas through non-covalent interactions, which was revealed by the non-covalent interaction index. Additionally, energy decomposition analysis reveals that dispersion energy is the key factor in stabilizing these systems.

Noncovalent π Interactions in Mutated Aquomet-Myoglobin Proteins: A QM/MM and Local Vibrational Mode Study

Protein dynamics and function is strongly connected to the energy flow taking place. Myoglobin (Mb) and its mutations are ideal systems to study the process of vibrational energy transfer (VET) at the molecular level. Anti-Stokes ultraviolet resonance Raman studies using a tryptophan (Trp) probe, introduced at different Mb positions by amino acid replacement, have suggested that the amount of VET depends on the position of the Trp probe relative to the heme group. Inspired by this experimental work, we explored the strength of noncovalent π interactions, as well as covalent interactions for both the axial and distal ligands bound to iron in aquomet-Mb with the local vibrational mode analysis (LMA), originally developed by Konkoli and Cremer. Two sets of noncovalent interactions were investigated: (1) the interaction between the water ligand and Trp rings and (2) the interaction between the Trp and the porphyrin rings of the heme group. We assessed the strength of these noncovalent interactions via a special local mode force constant. Various Trp-modified water-bound ferric Mb proteins in the ground state were studied (6 in total) using gas-phase and QM/MM calculations followed by LMA. Our results disclose that VET is indeed dependent on the position of the Trp probe relative to the heme group but also on the tautomeric nature of distal histidine. They provide new guidelines on how to assess noncovalent π interactions in proteins utilizing LMA and how to use these data to explore VET, and more generally protein dynamics and function.

Beryllium bonding with noble gas atoms

Quantum chemical calculations were carried out to investigate the nature of the bonding between a neutral Be₃ ring and noble gas atom. Electronic structure calculation for these complexes was carried out at different computational levels in association with natural bond orbital, quantum theory of atoms in molecules, electron localization function, symmetry adapted perturbation theory, and molecular electrostatic potential surface analysis of Be₃ complexes. The Be atoms in the Be₃ moiety are chemically bonded to one another, with the BeBe bond dissociation energy being ~125 kJ mol^-1 . The Be₃ ring interacts with the noble gases through non-covalent interactions. The binding energies of the noble gas atoms with the Be₃ ring increases with increase in their atomic number. The non-covalent interaction index, density overlap region indicator and independent gradient model analyses reveal the presence of non-covalent inter-fragment interactions in the complexes. Energy decomposition analysis reveals that dispersion plays the major role towards stabilizing these systems.

Dihydrogen Bonding-Seen through the Eyes of Vibrational Spectroscopy

In this work, we analyzed five groups of different dihydrogen bonding interactions and hydrogen clusters with an H3+ kernel utilizing the local vibrational mode theory, developed by our group, complemented with the Quantum Theory of Atoms-in-Molecules analysis to assess the strength and nature of the dihydrogen bonds in these systems. We could show that the intrinsic strength of the dihydrogen bonds investigated is primarily related to the protonic bond as opposed to the hydridic bond; thus, this should be the region of focus when designing dihydrogen bonded complexes with a particular strength. We could also show that the popular discussion of the blue/red shifts of dihydrogen bonding based on the normal mode frequencies is hampered from mode-mode coupling and that a blue/red shift discussion based on local mode frequencies is more meaningful. Based on the bond analysis of the H3+(H2)n systems, we conclude that the bond strength in these crystal-like structures makes them interesting for potential hydrogen storage applications.

A Theoretical Study of the Halogen Bond between Heteronuclear Halogen and Benzene

Halogen bonds play an important role in many fields, such as biological systems, drug design and crystal engineering. In this work, the structural characteristics of the halogen bond between heteronuclear halogen XD (ClF, BrCl, IBr, ICl, BrF and IF) and benzene were studied using density functional theory. The structures of the complexes between heteronuclear halogen and benzene have Cs symmetry. The interaction energies of the complexes between heteronuclear halogen XD (ClF, BrCl, IBr, ICl, BrF and IF) and benzene range from -27.80 to -37.18 kJ/mol, increasing with the increases in the polarity between the atoms of X and D, and are proportional to the angles of a between the Z axis and the covalent bond of heteronuclear halogen. The electron density (ρ) and corresponding Laplacian (∇²ρ) values indicate that the interaction of the heteronuclear halogen and benzene is a typical long-range weak interaction similar to a hydrogen bond. Independent gradient model analysis suggests that the van der Waals is the main interaction between the complexes of heteronuclear halogen and benzene. Symmetry-adapted perturbation theory analysis suggests that the electrostatic interaction is the dominant part in the complexes of C₆H₆⋯ClF, C₆H₆⋯ICl, C₆H₆⋯BrF and C₆H₆⋯IF, and the dispersion interaction is the main part in the complexes of C₆H₆⋯BrCl, C₆H₆⋯IBr.

Bonding in Nitrile Photo-dissociating Ruthenium Drug Candidates --A Local Vibrational Mode Study

In this work, we investigated bonding features 15 ruthenium complexes of the type [Ru(tpy)(L)-(CH3CN)]n+, containing the tridentate tpy ligand (tpy = 2,2':6',2'--terpyridine) and various bidentate ancillary ligands, 12 compounds originally synthesized by Loftus et al. (J. Phys. Chem. C 123, 10291-10299 (2019)) complemented with three additional complexes. The main focus of our work was to relate these local features to the experimental data of Loftus et al. which assess the efficiency of nitrile release in an indirect way via observed quantum yields for ruthenium water association after nitrile release. As a tool to quantitatively assess Ru-NC and Ru-L bonding we utilized the local vibrational mode analysis complemented by the topological analysis of the electron density and the natural bond orbital analysis. Interestingly, the stronger Ru-NC bonds have the greater observed quantum yields, leading to the conclusion that the observed quantum yields are a result of a complex interplay of several processes excluding a direct relationship between QY and Ru-NC or Ru-L bond strengths. We identified the ST splitting as one of the key players and not the Ru-NC bond strength, as one may have thought. In summary, this work has presented a modern computational tool set for the investigation of bonding features applied to nitrile photo-dissociating ruthenium drug candidates forming a valuable basis for future design and fine tuning of nitrile releasing ruthenium compounds, as well as for the understanding of how local properties affect overall experimental outcomes.

BF3–Catalyzed Diels–Alder Reaction between Butadiene and Methyl Acrylate in Aqueous Solution—An URVA and Local Vibrational Mode Study

In this study we investigate the Diels–Alder reaction between methyl acrylate and butadiene, which is catalyzed by BF3 Lewis acid in explicit water solution, using URVA and Local Mode Analysis as major tools complemented with NBO, electron density and ring puckering analyses. We considered four different starting orientations of methyl acrylate and butadiene, which led to 16 DA reactions in total. In order to isolate the catalytic effects of the BF3 catalyst and those of the water environment and exploring how these effects are synchronized, we systematically compared the non-catalyzed reaction in gas phase and aqueous solution with the catalyzed reaction in gas phase and aqueous solution. Gas phase studies were performed at the B3LYP/6-311+G(2d,p) level of theory and studies in aqueous solution were performed utilizing a QM/MM approach at the B3LYP/6-311+G(2d,p)/AMBER level of theory. The URVA results revealed reaction path curvature profiles with an overall similar pattern for all 16 reactions showing the same sequence of CC single bond formation for all of them. In contrast to the parent DA reaction with symmetric substrates causing a synchronous bond formation process, here, first the new CC single bond on the CH2 side of methyl acrylate is formed followed by the CC bond at the ester side. As for the parent DA reaction, both bond formation events occur after the TS, i.e., they do not contribute to the energy barrier. What determines the barrier is the preparation process for CC bond formation, including the approach diene and dienophile, CC bond length changes and, in particular, rehybridization of the carbon atoms involved in the formation of the cyclohexene ring. This process is modified by both the BF3 catalyst and the water environment, where both work in a hand-in-hand fashion leading to the lowest energy barrier of 9.06 kcal/mol found for the catalyzed reaction R1 in aqueous solution compared to the highest energy barrier of 20.68 kcal/mol found for the non-catalyzed reaction R1 in the gas phase. The major effect of the BF3 catalyst is the increased mutual polarization and the increased charge transfer between methyl acrylate and butadiene, facilitating the approach of diene and dienophile and the pyramidalization of the CC atoms involved in the ring formation, which leads to a lowering of the activation energy. The catalytic effect of water solution is threefold. The polar environment leads also to increased polarization and charge transfer between the reacting species, similar as in the case of the BF3 catalyst, although to a smaller extend. More important is the formation of hydrogen bonds with the reaction complex, which are stronger for the TS than for the reactant, thus stabilizing the TS which leads to a further reduction of the activation energy. As shown by the ring puckering analysis, the third effect of water is space confinement of the reacting partners, conserving the boat form of the six-member ring from the entrance to the exit reaction channel. In summary, URVA combined with LMA has led to a clearer picture on how both BF3 catalyst and aqueous environment in a synchronized effort lower the reaction barrier. These new insights will serve to further fine-tune the DA reaction of methyl acrylate and butadiene and DA reactions in general.

Structural study of 1- and 2-naphthol: new insights into the non-covalent H-H interaction in cis-1-naphthol

Previous microwave studies of naphthol monomers were supplemented by measuring spectra of all ¹³C mono-substituted isotopologues of the cis- and trans-conformers of 1-naphthol and 2-naphthol in their natural abundances. The resulting data were utilized to determine substitution structures and so-called semi-experimental effective structures. Results from electronic structure calculations show that the OH group of cis-1-naphthol points ≈6° out of plane, which is consistent with the inertial defect data of cis- and trans-1-naphthol. The non-planarity of cis-1-naphthol is a result of a close-contact H-atom-H-atom interaction. This type of H-H interaction has been the subject of much controversy in the past and we provide here an in-depth theoretical analysis of it. The naphthol system is particularly well-suited for such analysis as it provides internal standards with its four different isomers. The methods used include quantum theory of atoms in molecules, non-covalent interactions, independent gradient model, local vibrational mode, charge model 5, and natural bond orbital analyses. We demonstrate that the close-contact H-H interaction is neither a purely attractive nor repulsive interaction, but rather a mixture of the two.

On the formation of CN bonds in Titan's atmosphere-a unified reaction valley approach study

In this work, we investigated the formation of protonated hydrogen cyanide HCNH⁺ and methylene amine cation CH[Formula: see text] (both identified in Titan's upper atmosphere) from three different pathways which stem from the interaction between CH₄ and N⁺(³P). As a mechanistic tool, we used the Unified Reaction Valley Approach (URVA) complemented with the Local Mode Analysis (LMA) assessing the strength of the CN bonds formed in these reactions. Our URVA studies could provide a comprehensive overview on bond formation/cleavage processes relevant to the specific mechanism of eight reactions R1- R8 that occur across the three pathways. In addition, we could explain the formation of CH[Formula: see text] and the appearance of HCNH⁺ and CHNH[Formula: see text] along these paths. Although only smaller molecules are involved in these reactions including isomerization, hydrogen atom abstraction, and hydrogen molecule capture, we found a number of interesting features, such as roaming in reaction R3 or the primary interaction of H₂ with the carbon atom in HCNH⁺ in reaction R8 followed by migration of one of the H₂ hydrogen atoms to the nitrogen which is more cost effective than breaking the HH bond first; a feature often found in catalysis. In all cases, charge transfer between carbon and nitrogen could be identified as a driving force for the CN bond formation. As revealed by LMA, the CN bonds formed in reactions R1-R8 cover a broad bond strength range from very weak to very strong, with the CN bond in protonated hydrogen cyanide HCNH⁺ identified as the strongest of all molecules investigated in this work. Our study demonstrates the large potential of both URVA and LMA to shed new light into these extraterrestrial reactions to help better understand prebiotic processes as well as develop guidelines for future investigations involving areas of complex interstellar chemistry. In particular, the formation of CN bonds as a precursor to the extraterrestrial formation of amino acids will be the focus of future investigations. Formation of CN bonds in Titan's atmosphere visualized via the reaction path curvature.

Relating Bond Strength and Nature to the Thermodynamic Stability of Hypervalent Togni-Type Iodine Compounds

The bond strength and nature of a set of 32 Togni-like reagents have been investigated at the M062X/def2-TZVP(D) level of theory in acetonitrile described with the SMD continuum solvent model, to rationalize the main factors responsible for their thermodynamic stability in different conformations, and trifluoromethylation capabilities. For the assessment of bond strength, we utilized local stretching force constants and associated bond strength orders, complemented with local features of the electron density to access the nature of the bonds. Bond dissociation energies varied from 31.6 to 79.9 kcal/mol depending on the polarizing power of the ligand trans to CF3 . Based on the analysis of the Laplacian of the density, we propose that the charge-shift bond character plays an important role in the stability of the molecules studied, especially for those containing I-O bonds. New insights on the trans influence and on possible ways to fine-tune the stability of these reagents are provided.

Hydrogen Bonding in Natural and Unnatural Base Pairs-A Local Vibrational Mode Study

In this work hydrogen bonding in a diverse set of 36 unnatural and the three natural Watson Crick base pairs adenine (A)-thymine (T), adenine (A)-uracil (U) and guanine (G)-cytosine (C) was assessed utilizing local vibrational force constants derived from the local mode analysis, originally introduced by Konkoli and Cremer as a unique bond strength measure based on vibrational spectroscopy. The local mode analysis was complemented by the topological analysis of the electronic density and the natural bond orbital analysis. The most interesting findings of our study are that (i) hydrogen bonding in Watson Crick base pairs is not exceptionally strong and (ii) the N-H⋯N is the most favorable hydrogen bond in both unnatural and natural base pairs while O-H⋯N/O bonds are the less favorable in unnatural base pairs and not found at all in natural base pairs. In addition, the important role of non-classical C-H⋯N/O bonds for the stabilization of base pairs was revealed, especially the role of C-H⋯O bonds in Watson Crick base pairs. Hydrogen bonding in Watson Crick base pairs modeled in the DNA via a QM/MM approach showed that the DNA environment increases the strength of the central N-H⋯N bond and the C-H⋯O bonds, and at the same time decreases the strength of the N-H⋯O bond. However, the general trends observed in the gas phase calculations remain unchanged. The new methodology presented and tested in this work provides the bioengineering community with an efficient design tool to assess and predict the type and strength of hydrogen bonding in artificial base pairs.

Halogen Bonding Involving I2 and d8 Transition-Metal Pincer Complexes

We systematically investigated iodine–metal and iodine–iodine bonding in van Koten’s pincer complex and 19 modifications changing substituents and/or the transition metal with a PBE0–D3(BJ)/aug–cc–pVTZ/PP(M,I) model chemistry. As a novel tool for the quantitative assessment of the iodine–metal and iodine–iodine bond strength in these complexes we used the local mode analysis, originally introduced by Konkoli and Cremer, complemented with NBO and Bader’s QTAIM analyses. Our study reveals the major electronic effects in the catalytic activity of the M–I–I non-classical three-center bond of the pincer complex, which is involved in the oxidative addition of molecular iodine I2 to the metal center. According to our investigations the charge transfer from the metal to the σ* antibonding orbital of the I–I bond changes the 3c–4e character of the M–I–I three-center bond, which leads to weakening of the iodine I–I bond and strengthening of the metal–iodine M–I bond, facilitating in this way the oxidative addition of I2 to the metal. The charge transfer can be systematically modified by substitution at different places of the pincer complex and by different transition metals, changing the strength of both the M–I and the I2 bonds. We also modeled for the original pincer complex how solvents with different polarity influence the 3c–4e character of the M–I–I bond. Our results provide new guidelines for the design of pincer complexes with specific iodine–metal bond strengths and introduce the local vibrational mode analysis as an efficient tool to assess the bond strength in complexes.

Tetrel Bonding Interactions Involving Carbon at Work: Recent Advances in Crystal Engineering and Catalysis

The σ- and π-hole interactions are used to define attractive forces involving elements of groups 12–18 of the periodic table acting as Lewis acids and any electron rich site (Lewis base, anion, and π-system). When the electrophilic atom belongs to group 14, the resulting interaction is termed a tetrel bond. In the first part of this feature paper, tetrel bonds formed in crystalline solids involving sp3-hybridized carbon atom are described and discussed by using selected structures retrieved from the Cambridge Structural Database. The interaction is characterized by a strong directionality (close to linearity) due to the small size of the σ-hole in the C-atom opposite the covalently bonded electron withdrawing group. The second part describes the utilization of two allotropic forms of carbon (C60 and carbon nanotubes) as supramolecular catalysts based on anion–π interactions (π-hole tetrel bonding). This part emphasizes that the π-hole, which is considerably more accessible by nucleophiles than the σ-hole, can be conveniently used in supramolecular catalysis.

σ- and π-Hole Interactions

Supramolecular chemistry is a very active research field that was initiated in the last century [...]