Clinical and Technical Validation of Novel Bite Force Measuring Device for Functional Analysis after Mandibular Reconstruction

Comparative study of CAD/CAM reconstruction and miniplates for patient-specific fixation in LCL-type mandibular reconstruction

Objective

Miniplates offer superior clinical handling and facilitate postoperative removal after mandibular reconstruction but unfavorable load distribution under high stress has been shown. This study aimed to compare the clinical outcome of patient-specific 3D-printed (PS-3D) titanium miniplate with reconstruction plate fixation in three-segmental LCL-type reconstructions for the first time.

Methods

Patients undergoing three-segmental LCL-type mandibular reconstruction after malignant tumor resection between April 2017 and July 2023 were analyzed in a retrospective single-center study. Inclusion criteria were primary reconstruction using a fibula free flap and PS-3D titanium mini- or reconstruction plate fixation. Complication rates were recorded and analyzed within 6 months after surgery using the N - 1 Chi2- and unequal variance t-test.

Results

38 patients (10 females, 28 males; mean age 61.4 ± 7.6 years) met the inclusion criteria. In 14 patients (36.8%) miniplates were used in the anterior region. Rates of fixation failure, plate exposure, incomplete osseous union, wound infection, soft tissue, and overall complications did not differ significantly between the two plate systems.

Conclusion

Complication rates did not differ significantly between PS-3D mini- and reconstruction plates in three-segmental LCL-type mandibular reconstructions. Given their advantages in clinical handling and postoperative removal, PS-3D miniplates can be a viable alternative also in larger mandibular reconstructions.

Edible Bite Force Sensor: A Novel Approach to Measuring Bite Force in Biomedical and Dental Applications

BACKGROUND Measurement of bite force plays a crucial role in assessment of the masticatory system. With a growing interest in detecting occlusal irregularities, bite force sensors have garnered attention in the biomedical field. This study aimed to introduce a hydrogel bite force sensor, based on hydroxyethyl-cellulose-fructose-water (HEC-F-water), for premolar and molar teeth, and to evaluate it using optical profilometry, infrared spectroscopy (FTIR), and Instron Tension testing system, with 2.5 cm (1 inch) margins at top, bottom, right, and left. MATERIAL AND METHODS We fabricated 20 HEC-F-water hydrogel samples sized with surface of 1×1 cm, with 2 different widths - 1 mm and 5 mm. The samples were characterized using optical profilometry and FTIR and their electrical characteristics were determined using an impedance analyzer. Aluminum (Al) electrodes, fabricated using Cutting Plotter, were used to form a HEC-F-water-based transducer, which was used for bite force sensing. The Instron tensile testing system was employed, utilizing 3D printed models of the upper and lower jaw, to simulate biting. Forces in the range between 40 N and 540 N were exerted upon the transducer, and the output change in the electrical signal was measured. RESULTS The study determined the transfer function between bite force and capacitance. The fabricated sensor exhibited a sensitivity of 3.98 pF/N, an input range of 500 N, output range of 2 nF, and accuracy of 95.9%. CONCLUSIONS This study introduces an edible bite force sensor employing an edible hydrogel as a dielectric, presenting a novel avenue in the development of edible sensorics in dentistry.

Efficacy of wireless sensors in assessing occlusal and bite forces: A systematic review

BACKGROUND

The noteworthy correlation between bite force and masticatory performance emphasizes its significance as a meaningful and objective method for assessing oral function. Furthermore, in the study of bruxism, the measurement of intraoral bite force assumes critical importance. Given the importance of assessing occlusal forces and bite force, this systematic review aims to assess the efficacy of wireless sensors in measuring these forces.

METHODS

The search methodology employed in this systematic review adhered to the guidelines outlined by PRISMA. The strategy involved the exploration of various databases, including PubMed/MEDLINE, SCOPUS and SCIELO. An assessment tool was employed to evaluate the bias risk and study quality.

RESULTS

This systematic review encompassed six prospective clinical studies involving a total of 89 participants. Wireless sensors for measuring occlusal forces and bite forces were predominantly employed in healthy adults or individuals with bruxism, along with children undergoing orthodontic treatment. All wireless sensors employed in the studies underwent validation and reproducibility assessments, affirming their reliability. The findings indicated that all wireless sensors exhibited efficacy in detecting occlusal forces and bite forces.

CONCLUSION

Wireless sensors offer real-time monitoring of occlusal and bite forces, aiding in understanding force distribution and identifying bruxism patterns. Despite limited studies on their application, these sensors contribute to evolving insights. Integration into clinical practice requires careful consideration of factors like calibration and patient compliance. Ongoing research is crucial to address limitations and enhance the efficacy of wireless sensors in measuring occlusal and bite forces and managing bruxism.

To what extent can mastication functionality be restored following mandibular reconstruction surgery? A computer modeling approach

STATEMENT OF PROBLEM

Advanced cases of head and neck cancer involving the mandible often require surgical removal of diseased sections and subsequent replacement with donor bone. During the procedure, the surgeon must make decisions regarding which bones or tissues to resect. This requires balancing tradeoffs related to issues such as surgical access and post-operative function; however, the latter is often difficult to predict, especially given that long-term functionality also depends on the impact of post-operative rehabilitation programs.

PURPOSE

To assist in surgical decision-making, we present an approach for estimating the effects of reconstruction on key aspects of post-operative mandible function.

MATERIAL AND METHODS

We develop dynamic biomechanical models of the reconstructed mandible considering different defect types and validate them using literature data. We use these models to estimate the degree of functionality that might be achieved following post-operative rehabilitation.

RESULTS

We find significant potential for restoring mandibular functionality, even in cases involving large defects. This entails an average trajectory error below 2 mm, bite force comparable to a healthy individual, improved condyle mobility, and a muscle activation change capped at a maximum of 20%.

CONCLUSION

These results suggest significant potential for adaptability in the masticatory system and improved post-operative rehabilitation, leading to greater restoration of jaw function.

Laboratory Validation of a Novel Indigenously Developed Bite Force Measuring Device

INTRODUCTION

It is critical to measure the maximum voluntary bite force of patients receiving restorative dentistry. A new device known as "BYTE" has been developed indigenously to measure bite force in humans. The purpose of this study is to evaluate the BYTE device's consistency and accuracy in a lab setting.

METHODOLOGY

Testing and calibration were done in the laboratory. The calibration machine with load cell pressed the biting part of the device with various forces from 3 N to 444 N in 3 N increments for two to three seconds each. The recorded force value in Newton by the device was noted down.

RESULTS

At numerous standard loads, the minimum accuracy error is 0.333 N, while the maximum is 1.667 N. It marginally underestimates the load with an average accuracy error of 0.833 N.

CONCLUSION

The calibration report showed that the BYTE device is precise and reliable and can be used to measure maximum bite force.

Impact of the adjacent bone on pseudarthrosis in mandibular reconstruction with fibula free flaps

BACKGROUND

Mechanical and morphological factors have both been described to influence the rate of pseudarthrosis in mandibular reconstruction. By minimizing mechanical confounders, the present study aims to evaluate the impact of bone origin at the intersegmental gap on osseous union.

METHODS

Patients were screened retrospectively for undergoing multi-segment fibula free flap reconstruction of the mandible including the anterior part of the mandible and osteosynthesis using patient-specific 3D-printed titanium reconstruction plates. Percentage changes in bone volume and width at the bone interface between the fibula/fibula and fibula/mandible at the anterior intersegmental gaps within the same patient were determined using cone-beam computed tomography (CBCT). Additionally, representative samples of the intersegmental zones were assessed histologically and using micro-computed tomography (µCT).

RESULTS

The bone interface (p = 0.223) did not significantly impact the change in bone volume at the intersegmental gap. Radiotherapy (p < 0.001), time between CBCT scans (p = 0.006) and wound healing disorders (p = 0.005) were independent risk factors for osseous non-union. Preliminary analysis of the microstructure of the intersegmental bone did not indicate morphological differences between fibula-fibula and fibula-mandible intersegmental bones.

CONCLUSIONS

The bone interface at the intersegmental gap in mandibular reconstruction did not influence long-term bone healing significantly. Mechanical and clinical properties seem to be more relevant for surgical success.