1
|
Mapping Areas Invaded by Pinus sp. from Geographic Object-Based Image Analysis (GEOBIA) Applied on RPAS (Drone) Color Images. REMOTE SENSING 2022. [DOI: 10.3390/rs14122805] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Invasive alien species reduce biodiversity. In southern Brazil, the genus Pinus is considered invasive, and its dispersal by humans has resulted in this species reaching ecosystems that are more sensitive and less suitable for cultivation, as is the case for the restingas on Santa Catarina Island. Invasion control requires persistent efforts to identify and treat each new invasion case as a priority. In this study, areas invaded by Pinus sp. in restingas were mapped using images taken by a remotely piloted aircraft system (RPAS, or drone) to identify the invasion areas in great detail, enabling management to be planned for the most recently invaded areas, where management is simpler, more effective, and less costly. Geographic object-based image analysis (GEOBIA) was applied on images taken from a conventional RGB camera embedded in an RPAS, which resulted in a global accuracy of 89.56%, a mean kappa index of 0.86, and an F-score of 0.90 for Pinus sp. Processing was conducted with open-source software to reduce operational costs.
Collapse
|
2
|
Precise Quantification of Land Cover before and after Planned Disturbance Events with UAS-Derived Imagery. DRONES 2022. [DOI: 10.3390/drones6020052] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This paper introduces a detailed procedure to utilize the high temporal and spatial resolution capabilities of an unmanned aerial system (UAS) to document vegetation at regular intervals both before and after a planned disturbance, a key component in natural disturbance-based management (NDBM), which uses treatments such as harvest and prescribed burns toward the removal of vegetation fuel loads. We developed a protocol and applied it to timber harvest and prescribed burn events. Geographic image-based analysis (GEOBIA) was used for the classification of UAS orthomosaics. The land cover classes included (1) bare ground, (2) litter, (3) green vegetation, and (4) burned vegetation for the prairie burn site, and (1) mature canopy, (2) understory vegetation, and (3) bare ground for the timber harvest site. Sample datasets for both kinds of disturbances were used to train a support vector machine (SVM) classifier algorithm, which produced four land cover classifications for each site. Statistical analysis (a two-tailed t-test) indicated there was no significant difference in image classification efficacies between the two disturbance types. This research provides a framework to use UASs to assess land cover, which is valuable for supporting effective land management practices and ensuring the sustainability of land practices along with other planned disturbances, such as construction and mining.
Collapse
|
3
|
Abstract
Fire hazard is a condition that has potentially catastrophic consequences. Artificial intelligence, through Computer Vision, in combination with UAVs has assisted dramatically to identify this risk and avoid it in a timely manner. This work is a literature review on UAVs using Computer Vision in order to detect fire. The research was conducted for the last decade in order to record the types of UAVs, the hardware and software used and the proposed datasets. The scientific research was executed through the Scopus database. The research showed that multi-copters were the most common type of vehicle and that the combination of RGB with a thermal camera was part of most applications. In addition, the trend in the use of Convolutional Neural Networks (CNNs) is increasing. In the last decade, many applications and a wide variety of hardware and methods have been implemented and studied. Many efforts have been made to effectively avoid the risk of fire. The fact that state-of-the-art methodologies continue to be researched, leads to the conclusion that the need for a more effective solution continues to arouse interest.
Collapse
|
4
|
Using Leaf-Off and Leaf-On Multispectral Airborne Laser Scanning Data to Characterize Seedling Stands. REMOTE SENSING 2020. [DOI: 10.3390/rs12203328] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Information from seedling stands in time and space is essential for sustainable forest management. To fulfil these informational needs with limited resources, remote sensing is seen as an intriguing alternative for forest inventorying. The structure and tree species composition in seedling stands have created challenges for capturing this information using sensors providing sparse point densities that do not have the ability to penetrate canopy gaps or provide spectral information. Therefore, multispectral airborne laser scanning (mALS) systems providing dense point clouds coupled with multispectral intensity data theoretically offer advantages for the characterization of seedling stands. The aim of this study was to investigate the capability of Optech Titan mALS data to characterize seedling stands in leaf-off and leaf-on conditions, as well as to retrieve the most important forest inventory attributes, such as distinguishing deciduous from coniferous trees, and estimating tree density and height. First, single-tree detection approaches were used to derive crown boundaries and tree heights from which forest structural attributes were aggregated for sample plots. To predict tree species, a random forests classifier was trained using features from two single-channel intensities (SCIs) with wavelengths of 1550 (SCI-Ch1) and 1064 nm (SCI-Ch2), and multichannel intensity (MCI) data composed of three mALS channels. The most important and uncorrelated features were analyzed and selected from 208 features. The highest overall accuracies in classification of Norway spruce, birch, and nontree class in leaf-off and leaf-on conditions obtained using SCI-Ch1 and SCI-Ch2 were 87.36% and 69.47%, respectively. The use of MCI data improved classification by up to 96.55% and 92.54% in leaf-off and leaf-on conditions, respectively. Overall, leaf-off data were favorable for distinguishing deciduous from coniferous trees and tree density estimation with a relative root mean square error (RMSE) of 37.9%, whereas leaf-on data provided more accurate height estimations, with a relative RMSE of 10.76%. Determining the canopy threshold for separating ground returns from vegetation returns was found to be critical, as mapped trees might have a height below one meter. The results showed that mALS data provided benefits for characterizing seedling stands compared to single-channel ALS systems.
Collapse
|
5
|
Effectiveness of Sentinel-2 in Multi-Temporal Post-Fire Monitoring When Compared with UAV Imagery. ISPRS INTERNATIONAL JOURNAL OF GEO-INFORMATION 2020. [DOI: 10.3390/ijgi9040225] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Unmanned aerial vehicles (UAVs) have become popular in recent years and are now used in a wide variety of applications. This is the logical result of certain technological developments that occurred over the last two decades, allowing UAVs to be equipped with different types of sensors that can provide high-resolution data at relatively low prices. However, despite the success and extraordinary results achieved by the use of UAVs, traditional remote sensing platforms such as satellites continue to develop as well. Nowadays, satellites use sophisticated sensors providing data with increasingly improving spatial, temporal and radiometric resolutions. This is the case for the Sentinel-2 observation mission from the Copernicus Programme, which systematically acquires optical imagery at high spatial resolutions, with a revisiting period of five days. It therefore makes sense to think that, in some applications, satellite data may be used instead of UAV data, with all the associated benefits (extended coverage without the need to visit the area). In this study, Sentinel-2 time series data performances were evaluated in comparison with high-resolution UAV-based data, in an area affected by a fire, in 2017. Given the 10-m resolution of Sentinel-2 images, different spatial resolutions of the UAV-based data (0.25, 5 and 10 m) were used and compared to determine their similarities. The achieved results demonstrate the effectiveness of satellite data for post-fire monitoring, even at a local scale, as more cost-effective than UAV data. The Sentinel-2 results present a similar behavior to the UAV-based data for assessing burned areas.
Collapse
|
6
|
Mapping Heterogeneous Urban Landscapes from the Fusion of Digital Surface Model and Unmanned Aerial Vehicle-Based Images Using Adaptive Multiscale Image Segmentation and Classification. REMOTE SENSING 2020. [DOI: 10.3390/rs12071081] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Considering the high-level details in an ultrahigh-spatial-resolution (UHSR) unmanned aerial vehicle (UAV) dataset, detailed mapping of heterogeneous urban landscapes is extremely challenging because of the spectral similarity between classes. In this study, adaptive hierarchical image segmentation optimization, multilevel feature selection, and multiscale (MS) supervised machine learning (ML) models were integrated to accurately generate detailed maps for heterogeneous urban areas from the fusion of the UHSR orthomosaic and digital surface model (DSM). The integrated approach commenced through a preliminary MS image segmentation parameter selection, followed by the application of three supervised ML models, namely, random forest (RF), support vector machine (SVM), and decision tree (DT). These models were implemented at the optimal MS levels to identify preliminary information, such as the optimal segmentation level(s) and relevant features, for extracting 12 land use/land cover (LULC) urban classes from the fused datasets. Using the information obtained from the first phase of the analysis, detailed MS classification was iteratively conducted to improve the classification accuracy and derive the final urban LULC maps. Two UAV-based datasets were used to develop and assess the effectiveness of the proposed framework. The hierarchical classification of the pilot study area showed that the RF was superior with an overall accuracy (OA) of 94.40% and a kappa coefficient (K) of 0.938, followed by SVM (OA = 92.50% and K = 0.917) and DT (OA = 91.60% and K = 0.908). The classification results of the second dataset revealed that SVM was superior with an OA of 94.45% and K of 0.938, followed by RF (OA = 92.46% and K = 0.916) and DT (OA = 90.46% and K = 0.893). The proposed framework exhibited an excellent potential for the detailed mapping of heterogeneous urban landscapes from the fusion of UHSR orthophoto and DSM images using various ML models.
Collapse
|
7
|
Forestry Remote Sensing from Unmanned Aerial Vehicles: A Review Focusing on the Data, Processing and Potentialities. REMOTE SENSING 2020. [DOI: 10.3390/rs12061046] [Citation(s) in RCA: 49] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Currently, climate change poses a global threat, which may compromise the sustainability of agriculture, forestry and other land surface systems. In a changing world scenario, the economic importance of Remote Sensing (RS) to monitor forests and agricultural resources is imperative to the development of agroforestry systems. Traditional RS technologies encompass satellite and manned aircraft platforms. These platforms are continuously improving in terms of spatial, spectral, and temporal resolutions. The high spatial and temporal resolutions, flexibility and lower operational costs make Unmanned Aerial Vehicles (UAVs) a good alternative to traditional RS platforms. In the management process of forests resources, UAVs are one of the most suitable options to consider, mainly due to: (1) low operational costs and high-intensity data collection; (2) its capacity to host a wide range of sensors that could be adapted to be task-oriented; (3) its ability to plan data acquisition campaigns, avoiding inadequate weather conditions and providing data availability on-demand; and (4) the possibility to be used in real-time operations. This review aims to present the most significant UAV applications in forestry, identifying the appropriate sensors to be used in each situation as well as the data processing techniques commonly implemented.
Collapse
|