Enhanced Electrochemical Performance of MWCNT-Assisted Molybdenum-Titanium Carbide MXene as a Potential Electrode Material for Energy Storage Application

Two-dimensional (2D) materials such as MXenes have attracted considerable attention owing to their enormous potential for structural flexibility. Here, we prepared a Mo2TiC2Tx-layered structure from parent Mo2TiAlC2Tx MAX by chemically selective etching of the aluminum layer. The prepared MXene was employed in composite formation with CTAB-grafted multiwalled carbon nanotubes (MWCNTs) to have a structure with improved electrochemical performance. The samples were characterized to analyze the structure, morphology, elemental detection, vibrational modes, and surface chemistry, followed by an electrochemical performance of the Mo2TiC2Tx MXene and MWCNTs@Mo2TiC2Tx composite using the GAMRAY Potentiostat under a 1 M KOH electrolyte. The specific capacitance of pristine Mo2TiC2Tx was 425 F g-1, which was enhanced to 1740 F g-1 (almost 4 times) at 5 mV s-1 due to the increase in active surface area and conductive paths between the MXene sheets. The charge storage mechanism was studied by further resolving the cyclic voltammograms. MWCNTs@Mo2TiC2Tx showed much improved electrochemical performance and reaction kinetics, making it an ideal material candidate for supercapacitor applications.

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications

Preparing sustainable and highly efficient biochars as electrodes remains a challenge for building green energy storage devices. In this study, efficient carbon electrodes for supercapacitors were prepared via a facile and sustainable single-step pyrolysis method using spruce bark as a biomass precursor. Herein, biochars activated by KOH and ZnCl2 are explored as templates to be applied to prepare electrodes for supercapacitors. The physical and chemical properties of biochars for application as supercapacitors electrodes were strongly affected by factors such as the nature of the activators and the meso/microporosity, which is a critical condition that affects the internal resistance and diffusive conditions for the charge accumulation process in a real supercapacitor. Results confirmed a lower internal resistance and higher phase angle for devices prepared with ZnCl2 in association with a higher mesoporosity degree and distribution of Zn residues into the matrix. The ZnCl2-activated biochar electrodes’ areal capacitance reached values of 342 mF cm−2 due to the interaction of electrical double-layer capacitance/pseudocapacitance mechanisms in a matrix that favors hydrophilic interactions and the permeation of electrolytes into the pores. The results obtained in this work strongly suggest that the spruce bark can be considered a high-efficiency precursor for biobased electrode preparation to be employed in SCs.

Recent Advancements in the Synthesis and Application of Carbon-Based Catalysts in the ORR

Fuel cells are a promising alternative to non-renewable energy production industries such as petroleum and natural gas. The cathodic oxygen reduction reaction (ORR), which makes fuel cell technology possible, is sluggish under normal conditions. Thus, catalysts must be used to allow fuel cells to operate efficiently. Traditionally, platinum (Pt) catalysts are often utilized as they exhibit a highly efficient ORR with low overpotential values. However, Pt is an expensive and precious metal, posing economic problems for commercialization. Herein, advances in carbon-based catalysts are reviewed for their application in ORRs due to their abundance and low-cost syntheses. Various synthetic methods from different renewable sources are presented, and their catalytic properties are compared. Likewise, the effects of heteroatom and non-precious metal doping, surface area, and porosity on their performance are investigated. Carbon-based support materials are discussed in relation to their physical properties and the subsequent effect on Pt ORR performance. Lastly, advances in fuel cell electrolytes for various fuel cell types are presented. This review aims to provide valuable insight into current challenges in fuel cell performance and how they can be overcome using carbon-based materials and next generation electrolytes.

Synthesis and Characterization of Supercapacitor Materials from Soy

Renewable resources and their byproducts are becoming of growing interest for alternative energy. Here, we have demonstrated the use of Arkansas’ most important crop, soy, as a carbon precursor for the synthesis of carbonized activated materials for supercapacitor applications. Different soy products (soymeal, defatted soymeal, soy flour and soy protein isolate) were converted into carbonized carbon and co-doped with phosphorus and nitrogen simultaneously, using a facile and time-effective microwave synthesis method. Ammonium polyphosphate was used as a doping agent which also absorbs microwave radiation. The surface morphology of the resulting carbonized materials was characterized in detail using scanning electron microscopy. X-ray photoelectron spectroscopy was also performed, which revealed the presence of a heteroelemental composition, along with different functional groups at the surface of the carbonized materials. Raman spectroscopy results depicted the presence of both a graphitic and defect carbon peak, with defect ratios of over one. The electrochemical performance of the materials was recorded using cyclic voltammetry in various electrolytes including acids, bases and salts. Among all the other materials, soymeal exhibited the highest specific capacitance value of 127 F/g in acidic electrolytes. These economic materials can be further tuned by changing the doping elements and their mole ratios to attain exceptional surface characteristics with improved specific capacitance values, in order to boost the economy of Arkansas, USA.

Characterization and Electrocatalytic Performance of Molasses Derived Co-Doped (P, N) and Tri-Doped (Si, P, N) Carbon for the ORR

There is a growing need to develop sustainable electrocatalysts to facilitate the reduction of molecular oxygen that occurs at the cathode in fuel cells, due to the excessive cost and limited availability of precious metal-based catalysts. This study reports the synthesis and characterization of phosphorus and nitrogen co-doped carbon (PNDC) and silicon, phosphorus, and nitrogen tri-doped carbon (SiPNDC) electrocatalysts derived from molasses. This robust microwave-assisted synthesis approach is used to develop a low cost and environmentally friendly carbon with high surface area for application in fuel cells. Co-doped PNDC as well as tri-doped SiPNDC showed Brunauer–Emmet–Teller (BET) surface areas of 437 and 426 m2 g−1, respectively, with well-developed porosity. However, examination of X-ray photoelectron spectroscopy (XPS) data revealed significant alteration in the doping elemental composition among both samples. The results obtained using rotating disk electrode (RDE) measurements show that tri-doped SiPNDC achieves much closer to a 4-electron process than co-doped PNDC. Detailed analysis of experimental results acquired from rotating ring disk electrode (RRDE) studies indicates that there is a negligible amount of peroxide formation during ORR, further confirming the direct-electron transfer pathway results obtained from RDE. Furthermore, SiPNDC shows stable oxygen reduction reaction (ORR) performance over 2500 cycles, making this material a promising electrocatalyst for fuel cell applications.

A Review of Electrospun Carbon Nanofiber-Based Negative Electrode Materials for Supercapacitors

The development of smart negative electrode materials with high capacitance for the uses in supercapacitors remains challenging. Although several types of electrode materials with high capacitance in energy storage have been reported, carbon-based materials are the most reliable electrodes due to their high conductivity, high power density, and excellent stability. The most common complaint about general carbon materials is that these electrode materials can hardly ever be used as free-standing electrodes. Free-standing carbon-based electrodes are in high demand and are a passionate topic of energy storage research. Electrospun nanofibers are a potential candidate to fill this gap. However, the as-spun carbon nanofibers (ECNFs) have low capacitance and low energy density on their own. To overcome the limitations of pure CNFs, increasing surface area, heteroatom doping and metal doping have been chosen. In this review, we introduce the negative electrode materials that have been developed so far. Moreover, this review focuses on the advances of electrospun nanofiber-based negative electrode materials and their limitations. We put forth a future perspective on how these limitations can be overcome to meet the demands of next-generation smart devices.