Shunt Active Power Filter: A Review on Phase Synchronization Control Techniques

Sensor Effects in LCL-Type Grid-Connected Shunt Active Filters Control Using Higher-Order Sliding Mode Control Techniques

The effects of measuring devices/sensors on improving the power quality (PQ) of electric networks are studied in this paper. In this context, improving the performance of an LCL-type grid connected to a three-phase three-wire shunt active filter (SAF) in the presence of voltage perturbations is studied. In order to ensure the high-quality performance of LCL-SAF in the presence of voltage perturbations, the robust continuous second-order sliding mode controller (2-SMC), including twisting and super-twisting controllers, and continuous higher-order sliding mode controller (C-HOSMC)-based approaches are employed. These controllers, whose outputs are processed by pulse-width modulation (PWM), allow minimization of the phase shift and prevent the generation of discontinuous chattering commands, which can severely damage the VSI components. Moreover, an integration of a generalized instantaneous power identification algorithm with an advanced phase locked loop (PLL) was proposed and experimentally tested to validate the effective performances of SAF under severe perturbations. Additionally, the studied approaches were tested via simulations taking into account a conventional nonlinear industrial load in a real textile factory environment, using measurements provided by power quality analyzers. Finally, the effects of the measuring devices, including the current and voltage sensors, on the accuracy and reliability of the SAF and, consequently, on the PQ of the electric power grid were studied via simulations and experimentally. The results of this study support the validity of the recently published patent.

A Filter-Less Time-Domain Method for Reference Signal Extraction in Shunt Active Power Filters

Current distortion degrades power quality and affects system performance, especially for sensitive loads that require pure sinusoidal waves. Owing to its excellent dynamic response, a well-designed active power filter (APF) can achieve a total harmonic distortion (THD) within the acceptable limits defined by IEEE 3002 standards through compensating harmonic distortions. The APF consists of two main modules: a reference signal extraction module and a modulation module. This paper adapts the matrix pencil method, a well-known model-based parameter estimation technique, to the problem of reference extraction. Contrary to conventional time-domain methods such as the synchronous reference frame (SRF) and the reactive power theory (PQ theory) that rely on low-pass filters in their implementations, the proposed method does not use a filter. However, it extracts the reference signal by first decomposing the load current into its constituent frequency components, and then subtracting the pure sine wave synthesized from the obtained fundamental component from the load current. Results on simulated data from MATLAB/Simulink confirm the higher accuracy and fast response time of the proposed method in extracting the reference signal.

Assessment of Harmonic Mitigation in V/f Drive of Induction Motor Using an ANN-Based Hybrid Power Filter for a Wheat Flour Mill

Voltage/frequency (V/f) drive of a three-phase induction motor plays a crucial role in a flour mill for energy saving. Wheat consumption in India is increasing day by day, which reached 105,000 metric ton (MT) in 2021. India’s high wheat consumption and production increase flour mills. Thus, energy efficiency in a flour mill is a must in the present situation. Hence, V/f drives are widely used in flour mills. Apart from the advantages of V/f drive, electronic circuits in a drive induce harmonics in a power system. Power quality plays a vital role in a modern power system. Harmonics by V/f drive increase the current consumption, causing increased losses, cable overheating, and motor overheating, which necessitates a filter for harmonic mitigation. In this paper, an artificial neural network controller-based hybrid power filter is proposed for harmonic mitigation. A hybrid power filter (HPF) is presented to overcome the problems and achieve the active and passive power filter’s benefits. Harmonic mitigation of the proposed hybrid power filter is compared with the passive and active filter-based drives. This paper analyzes harmonic mitigation for three-phase induction motors with V/f drive installed in a 300-ton/day wheat flour mill’s purifier fan. The performance of the suggested system is analyzed under various speeds in the aspects of harmonic mitigation, reduction in current consumption, and energy saving using various filters. The entire system is developed and analyzed using MATLAB/Simulink. Energy saving is increased by around 10.97 kWh per year by HPF by means of reducing harmonics and current consumption compared to an active power filter, while it is increased by around 28.16 kWh/year compared to a passive power filter. Along with the harmonic mitigation, energy saving is also validated for various filters under various speeds.

Control Method of Four Wire Active Power Filter Based on Three-Phase Neutral Point Clamped T-Type Converter

An active power filter based on a three-level neutral point clamped T-type converter with LCL input filter is presented in the paper. The main goal of the paper is the analysis of a control system that ensures independent control of a current in each phase. The presented control method of the filter allows reactive power compensation and/or a higher harmonics reduction to be achieved in each phase independently, with the possibility of control tan (φ) coefficient. This allows the power flow between the phases to be minimalized and reduces the RMS values of filter currents without the need to balance grid currents. The analysis presents the possibility of an operation in different modes, which was verified by experimental results. The results have been obtained in a 20 ARMS laboratory system described in the paper. The results reveal relatively low power losses, which are a feature of the selected three-level T-type topology. Additionally, that topology, when compared to a two-level one, ensures the reduction in current ripples with the same parameters of passive components.

Hardware Implementation of Composite Control Strategy for Wind-PV-Battery Hybrid Off-Grid Power Generation System

In this paper, a composite control strategy for improved off-grid configuration based on photovoltaic (PV array), a wind turbine (WT), and a diesel engine (DE) generator to achieve high performance while supplying nonlinear loads is investigated. To operate the WT efficiently under variable speed conditions and to obtain accurate and fast convergence to the maximum global operating point without a speed sensor, an iterative interpolation method is integrated with the perturbation and observation (P&O) technique. To ensure the balance of power in the system and to achieve the maximum power from the PV array without using any maximum power point tracking (MPPT) method, and ensuring stable operation during the disturbance, a double-loop control strategy for a two-switches buck-boost converter is developed. Furthermore, to protect the synchronous generator of the diesel generator (DG) from the 5th and 7th order-harmonics created by the connected nonlinear loads and to solve the issue of the filter resonance, the interfacing three-phase inverter is controlled using an improved synchronous-reference frame algorithm (SRF) with virtual impedance active damping. The presented work demonstrates effective and efficient control along with improved performance and cost-effective option as compared to the similar works reported in the literature. The performance of the presented off-grid configuration and its developed composite control strategy are tested using MATLAB/Simulink and validated through small-scale hardware prototyping.

Investigation on the Work Efficiency of the LC Passive Harmonic Filter Chosen Topologies

The use of passive harmonic filters (PHFs) in an electrical system is in most cases for the fundamental harmonic reactive power compensation and harmonics mitigation. In comparison to other filters applied to improve the power quality, such as the shunt active power filter or hybrid active power filter, their main advantages are the low investment costs and easy applicability in low-, medium-, and high-voltage electrical systems. However, their installation demands a deep analysis of the electrical system as well as a thorough knowledge of the topology to be installed. Their work efficiency is influenced by the parameters of the electrical system (grid, load, and filter itself) which must be well-known before installation. The aim of this paper is to present an investigation on the work efficiency of the LC passive harmonic filter chosen topologies. The PHFs are investigated in the frequency domain through their impedance versus frequency characteristics as well as in the time domain through an electrical system. A comparative study between filters is also considered. The investigations on the case examples of PHFs are based on simulations and some laboratory studies are also presented.

Modeling and Simulation of a PI Controlled Shunt Active Power Filter for Power Quality Enhancement Based on P-Q Theory

The design of reliable power filters that mitigate current and voltage harmonics to meet the power quality requirements of the utility grid is a major requirement of present-day power systems. In this paper, a detailed systematic approach to design a shunt active power filter (SAPF) for power quality enhancement is discussed. A proportional–integral (PI) controller is adopted to regulate the DC-link voltage. The instantaneous reactive power theory is employed for the reference current’s extraction. Hysteresis current control is used to obtain the gate pulses that control the voltage source inverter (VSI) switches. The detailed SAPF is developed and simulated for balanced nonlinear loads and unbalanced nonlinear loads using MATLAB/Simulink. The simulation results indicate that the proposed filter can minimize the harmonic distortion to a level below that deployed by the Institute of Electrical and Electronics Engineers (IEEE) standards.