Two-Stage Pretreatment to Improve Saccharification of Oat Straw and Jerusalem Artichoke Biomass

Nutritional, functional, and sensorial properties of oat milk produced by single and combined acid, alkaline, α-amylase, and sprouting treatments

In this study, the effects of different treatments of the oat slurry on the nutritional, functional, and sensorial properties of oat milk were evaluated. The sprouting and sprouting-acidic treatments have the highest oat milk yield (91.70%) and protein extraction yield (82.74%), respectively. The protein concentrations of alkali, sprouting-acidic, and α-amylase-alkali treatments were significantly (p < .05) higher than other treatments. The alkali treatments showed higher fat content (0.66%). In addition, acidic and alkali treatments in single or combined with other treatments showed the highest dry matter and energy value. The carbohydrate content of α-amylase-alkali treatment (4.35%) was higher than other treatments and also, all acidic treatments showed higher ash content (>1) compared to the other treatments. Furthermore, the sprouting-α-amylase and acidic-α-amylase showed the lowest starch (0.28%) and the highest reducing sugar content (3.15%) compared to the other treatments, respectively. Moreover, the α-amylase-alkali treatment showed the highest total phenolic content and antioxidant activity (342.67 mg GAE/L and 183.08 mg BHT eq/L, respectively). Furthermore, sensory evaluation of most treatments showed acceptable scores (≥7) for consumers, especially in the case of α-amylase, sprouting, and α-amylase-sprouting treatments. Results show that the different treatments had different effects on the nutritional, functional, and sensorial properties of oat milk. In conclusion, from the nutritional and functional point of view, the two-stage treatments were more effective than singular treatments on investigated factors proposing their application in functional plant milk preparation.

Two-Stage Pretreatment of Jerusalem Artichoke Stalks with Wastewater Recycling and Lignin Recovery for the Biorefinery of Lignocellulosic Biomass

Jerusalem artichoke (Helianthus tuberosus L.) is emerging as one of the energy plants considered for biofuel production. Alkali and alkali-involved pretreatment methods have been widely used for the bioconversion of cellulosic materials due to their high sugar yield and low inhibitor release. However, the recovery and treatment of wastewater (black liquor) have been poorly studied. Here, we present a novel two-stage pretreatment process design for recycling black liquor. Jerusalem artichoke stalk (JAS) was first treated with 2% (w/v) NaOH, after which lignin was recovered by H2SO4 at pH 2.0 from the black liquor. The recycled solutions were subsequently used to treat the NaOH-pretreated JAS for the second time to dissolve hemicellulose. CO-pretreated JAS, hydrolysates, and acid-insoluble lignin were obtained after the above-mentioned two-stage pretreatment. A reducing sugar yield of 809.98 mg/g Co-pretreated JAS was achieved after 48 h at 5% substrate concentration using a cellulase dosage of 25 FPU/g substrate. In addition, hydrolysates containing xylose and acid-insoluble lignin were obtained as byproducts. The pretreatment strategy described here using alkali and acid combined with wastewater recycling provides an alternative approach for cellulosic biorefinery.

Pretreatment of Jerusalem artichoke stalk using hydroxylammonium ionic liquids and their influences on 2,3-butanediol fermentation by Bacillus subtilis

Pretreatment of lignocellulose is a vital step for biological production of bio-chemicals and bio-fuels. In this work, the pretreatment of Jerusalem artichoke stalk (JAS) by hydroxylammonium ionic liquids was evaluated based on pretreatment efficiency including polysaccharide recovery and enzymatic digestibility, and influence of ionic liquids on 2,3-butanediol fermentation using Bacillus subtilis. The results showed ethanolammonium acetate (EOAA) was efficient in JAS pretreatment, and maximum cell density was increased 25% when EOAA concentration was not greater than 0.3 mol/L in medium, while the total concentration of acetoin and 2,3-butanediol was 15% greater than the control at 0.1 mol/L EOAA. After the pretreatment under optimized conditions of 170 °C for 5-h and liquid-solid ratio of 18, about 87% cellulose and 75% hemicellulose were recovered, and glucose yield of 64% and xylose of 66% were obtained after 24-h hydrolysis of JAS residue by cellulase (15 FPU/g) with solid loading of 10 wt%.

A Combination Method of Liquid Hot Water and Phosphotungstic Acid Pretreatment for Improving the Enzymatic Saccharification Efficiency of Rice Straw

Chemical pretreatment can significantly improve the enzymatic hydrolysis efficiency of lignocellulosic biomass, thereby improving the yield of sugar materials for the production of cellulosic ethanol, but commonly used acid–base catalysts are difficult to recover and reuse. In this work, a combination method of liquid hot water (LHW) and phosphotungstic acid (PTA) pretreatment was performed to improve the saccharification efficiency of rice straw, and we attempted to evaluate the reuse effect of PTA catalysts. The rice straw was first treated with LHW at 180 °C for 90 min, and then treated with 20 mM PTA at 130 °C for 60 min. After pretreatment, the cellulose hydrolysis efficiency and glucose recovery of the rice straw increased by 201.85% and 164.25%, respectively. Glucose accounted for 96.8% of the total reducing sugar in the final enzymatic hydrolysate. After each PTA pretreatment, approximately 70.8–73.2% of the PTA catalyst could be recycled. Moreover, the catalytic activity of the PTA catalyst that had been used five times did not decrease. The improved enzymatic saccharification efficiency was attributed to the removal of 89.24% hemicellulose and 21.33% lignin from the lignocellulosic substrate. The two-step LHW-PTA pretreatment could pretreat biomass in the field of cellulosic ethanol production.

Advanced Bioethanol Production: From Novel Raw Materials to Integrated Biorefineries

The production of so-called advanced bioethanol offers several advantages compared to traditional bioethanol production processes in terms of sustainability criteria. This includes, for instance, the use of nonfood crops or residual biomass as raw material and a higher potential for reducing greenhouse gas emissions. The present review focuses on the recent progress related to the production of advanced bioethanol, (i) highlighting current results from using novel biomass sources such as the organic fraction of municipal solid waste and certain industrial residues (e.g., residues from the paper, food, and beverage industries); (ii) describing new developments in pretreatment technologies for the fractionation and conversion of lignocellulosic biomass, such as the bioextrusion process or the use of novel ionic liquids; (iii) listing the use of new enzyme catalysts and microbial strains during saccharification and fermentation processes. Furthermore, the most promising biorefinery approaches that will contribute to the cost-competitiveness of advanced bioethanol production processes are also discussed, focusing on innovative technologies and applications that can contribute to achieve a more sustainable and effective utilization of all biomass fractions. Special attention is given to integrated strategies such as lignocellulose-based biorefineries for the simultaneous production of bioethanol and other high added value bioproducts.

Ultrasonically-Assisted Dissolution of Sugarcane Bagasse during Dilute Acid Pretreatment: Experiments and Kinetic Modeling

Ultrasonic irradiation is known to enhance various physicochemical processes. In this work, the effect of ultrasound on the dissolution of sugarcane bagasse was studied, with the specific aims of quantifying the effect at low solids loading and mild reaction conditions, and determining whether the enhancement of dissolution by ultrasound is independent of temperature. The effects of agitation speed, reaction time, and sonication were examined on the dissolution of the biomass substrate at varying reaction temperatures during the pretreatment process. Sugarcane bagasse was mixed with a 0.3 M solution of sulfuric acid in a reaction vessel to undergo pretreatment. A kinetic model was applied to the mass dissolution of the biomass, as sonicated runs showed higher mass losses at each reaction time, compared to the non-sonicated runs. The ultrasonic enhancement in mass dissolution was seen to increase for an increase in the reaction time. It was observed that the induction period for the dissolution was eliminated by the application of ultrasound. Ultrasound was found to be more effective than temperature at enhancing mass dissolution at low solids loadings, and the effect of ultrasound was also found to be dependent on the temperature employed.

One-Step or Two-Step Acid/Alkaline Pretreatments to Improve Enzymatic Hydrolysis and Sugar Recovery from Arundo Donax L

Energy crops are not easily converted by microorganisms because of their recalcitrance. This necessitates a pretreatment to improve their biodigestibility. The effects of different pretreatments, as well as their combination on the enzymatic digestibility of Arundo donax L. were systematically investigated to evaluate its potential for bioconversion. Dilute alkaline pretreatment (ALP) using 1.2% NaOH at 120 °C for 30 min resulted in the highest reducing sugar yield in the enzymatic hydrolysis process because of its strong delignification and morphological modification, while ferric chloride pretreatment (FP) was effective in removing hemicellulose and recovering soluble sugars in the pretreatment stage. Furthermore, an efficient two-step ferric chloride-alkaline pretreatment (FALP) was successfully developed. In the first FP step, easily degradable cellulosic components, especially hemicellulose, were dissolved and then effectively recovered as soluble sugars. Subsequently, the FP sample was further treated in the second ALP step to remove lignin to enhance the enzymatic hydrolysis of the hardly degradable cellulose. As a result, the integrated two-step process obtained the highest total sugar yield of 420.4 mg/g raw stalk in the whole pretreatment and enzymatic hydrolysis process; hence, the process is a valuable candidate for biofuel production.

Feasibility Assessment of a Bioethanol Plant in the Northern Netherlands

Due to the exhaustion and increased pressure regarding the environmental and political aspects of fossil fuels, the industrial focus has switched towards renewable energy resources. Lignocellulosic biowaste can come from several sources, such as industrial waste, agricultural waste, forestry waste, and bioenergy crops and processed into bioethanol via a biochemical pathway. Although much research has been done on the ethanol production from lignocellulosic biomass, the economic viability of a bioethanol plant in the Northern Netherlands is yet unknown, and therefore, examined. In this thesis, the feasibility study of a bioethanol plant treating sugar beet pulp, cow manure, and grass straw is conducted using the simulation software SuperPro Designer. Results show that it is not economically viable to treat the tested lignocellulosic biomass for the production of bioethanol, since all three original cases result in a negative net present value (NPV). An alternative would be to exclude the pretreatment step from the process. Although this results in a lower production of bioethanol per year, the plant treating sugar beet pulp (SBP) and grass straw (GS) becomes economically viable since the costs have significantly decreased.