Iron Phthalocyanine/Graphene Composites as Promising Electrocatalysts for the Oxygen Reduction Reaction

Development of Electrochemical Sensor Using Iron (III) Phthalocyanine/Gold Nanoparticle/Graphene Hybrid Film for Highly Selective Determination of Nicotine in Human Salivary Samples

Nicotine is the one of the major addictive substances; the overdose of nicotine (NIC) consumption causes increasing heart rate, blood pressure, stroke, lung cancer, and respiratory illnesses. In this study, we have developed a precise and sensitive electrochemical sensor for nicotine detection in saliva samples. It was built on a glassy carbon electrode (GCE) modified with graphene (Gr), iron (III) phthalocyanine-4,4',4″,4'''-tetrasulfonic acid (Fe(III)Pc), and gold nanoparticles (AuNPs/Fe(III)Pc/Gr/GCE). The AuNPs/Fe(III)Pc/Gr nanocomposite was prepared and characterized by using FE-SEM, EDX, and E-mapping techniques to confirm the composite formation as well as the even distribution of elements. Furthermore, the newly prepared AuNPs/Fe(III)Pc/Gr/GCE-nanocomposite-based sensor was used to detect the nicotine in phosphate-buffered solution (0.1 M PBS, pH 7.4). The AuNPs/Fe(III)Pc/Gr/GCE-based sensor offered a linear response against NIC from 0.5 to 27 µM with a limit of detection (LOD) of 17 nM using the amperometry (i-t curve) technique. This electrochemical sensor demonstrated astounding selectivity and sensitivity during NIC detection in the presence of common interfering molecules in 0.1 M PBS. Moreover, the effect of pH on NIC electro-oxidation was studied, which indicated that PBS with pH 7.4 was the best medium for NIC determination. Finally, the AuNPs/Fe(III)Pc/Gr/GCE sensor was used to accurately determine NIC concentration in human saliva samples, and the recovery percentages were also calculated.

2,6-Diaminopyridine-Based Polyurea as an ORR Electrocatalyst of an Anion Exchange Membrane Fuel Cell

In order to yield more Co(II), 2,6-diaminopyridine (DAP) was polymerized with 4,4-methylene diphenyl diisocyanates (MDI) in the presence of Co(II) to obtain a Co-complexed polyurea (Co-PUr). The obtained Co-PUr was calcined to become Co, N-doped carbon (Co-N-C) as the cathode catalyst of an anion exchange membrane fuel cell (AEMFC). High-resolution transmission electron microscopy (HR-TEM) of Co-N-C indicated many Co-Nx (Co covalent bonding with several nitrogen) units in the Co-N-C matrix. X-ray diffraction patterns showed that carbon and cobalt crystallized in the Co-N-C catalysts. The Raman spectra showed that the carbon matrix of Co-N-C became ordered with increased calcination temperature. The surface area (dominated by micropores) of Co-N-Cs also increased with the calcination temperature. The non-precious Co-N-C demonstrated comparable electrochemical properties (oxygen reduction reaction: ORR) to commercial precious Pt/C, such as high on-set and half-wave voltages, high limited reduction current density, and lower Tafel slope. The number of electrons transferred in the cathode was close to four, indicating complete ORR. The max. power density (P_max) of the single cell with the Co-N-C cathode catalyst demonstrated a high value of 227.7 mWcm^-2.

Tetraphenolphthalein Cobalt(II) Phthalocyanine Polymer Modified with Multiwalled Carbon Nanotubes as an Efficient Catalyst for the Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is the main reaction at the cathode of a fuel cell that utilizes Pt/C as the benchmark catalyst. Due to sluggish activity, high cost, rare abundance, and durability issues, Pt/C must be replaced by nonprecious, stable, and easily synthesizable materials. This work involves the synthesis of novel, simple, low-cost, and environmentally friendly phenolphthalein-bearing cobalt(II) phthalocyanine polymer, poly(Co II TPpPc) dyad, as an efficient catalyst for ORR. The results of analytical characterizations reveal the formation of the poly(Co II TPpPc) polymer in the pure state. To further enhance the catalytic response of poly(Co II TPpPc), a hybrid composite is prepared using poly(Co II TPpPc) and multiwalled carbon nanotubes (MWCNTs) that increase the surface area and conductivity. The poly(Co II TPpPc) and hybrid composite are separately deposited on the electrode surfaces. The electron microscopy images confirm the uniform distribution of the poly(Co II TPpPc) molecules on the electrode surface and MWCNTs. The poly(Co II TPpPc) and hybrid composite electrodes are evaluated for ORR, and the hybrid composite exhibits better onset potential at 0.803 V versus reversible hydrogen reference electrode for ORR according to linear sweep voltammograms (LSVs). The obtained data are superior compared to those of other carbon-based redox-active materials reported previously and nearer to those of the benchmark catalyst (Pt/C). The rotating disc electrode measurement of the hybrid composite electrode confirms the total number of electrons involved in ORR to be four. Furthermore, the hybrid composite electrode exhibits an excellent stability for 100 LSV scans. The synergistic effect of poly(Co II TPpPc) and MWCNTs leads to the surprisingly high ORR activity due to the improved surface area, conductivity, and interfacial confined surface.

Oxygen reduction reaction activity of an iron phthalocyanine/graphene oxide nanocomposite

Electrocatalysts with metal–nitrogen–carbon (M–N–C) sites have recently attracted much attention as potential catalysts for the oxygen reduction reaction (ORR), and a hybrid of iron phthalocyanine (FePc) and reduced graphene oxide (rGO) is one of the promising candidates. Herein, a FePc/GO nanocomposite was synthesized by electrostatic deposition on the electrode. The electrochemically reduced FePc/GO nanocomposite (ER(FePc/GO)) contained Fe²⁺ centers in well reduced graphene sites without agglomeration. The ER(FePc/GO) exhibited high ORR activity with an ORR onset (E_onset) and half-wave potential (E_1/2) of 0.97 and 0.86 V, respectively. Furthermore, the ORR activity successfully improved by adding an electrolyte such as KCl or KNO₃. The small H₂O₂ yield of 2%, superior tolerance to methanol addition and high-durability indicate that the ER(FePc/GO) is a promising electrocatalyst. Theoretical studies, indicating that the presence of Cl⁻ and NO₃⁻ ions lowered the conversion energy barrier, strongly supported the experimental results.

We demonstrate from both experimental and theoretical viewpoints that an iron phthalocyanine/graphene oxide nanocomposite directly synthesized on electrode exhibits high ORR activity.