Catalytic Hydrotreating of Crude Pongamia pinnata Oil to Bio-Hydrogenated Diesel over Sulfided NiMo Catalyst

Review of Molybdenum Disulfide Research in Slurry Bed Heavy Oil Hydrogenation

With the growing demand for gasoline and diesel fuel and the shortage of conventional oil reserves, there has been extensive interest in upgrading technologies for unconventional feedstocks such as heavy oil. Slurry bed reactors with high tolerance to heavy oil have been extensively investigated. Among them, dispersive MoS₂ is favored for its excellent hydrogenation ability for heavy oil even under harsh reaction conditions such as high pressure and high temperature, its ability to effectively prevent damage to equipment from deposited coke, and its ability to meet the requirement of high catalyst dispersion for slurry bed reactors. This paper reviews the relationship between the structure and hydrogenation effectiveness of dispersive molybdenum disulfide, the hydrogenation mechanism, and the improvement of its hydrogenation performance by adding defects and compares the application of molybdenum disulfide in heavy oil hydrogenation, desulfurization, deoxygenation, and denitrification. It is found that the current research on dispersive molybdenum disulfide catalysts focuses mostly on the reduction of stacking layers and catalytic performance, and there is a lack of research on the lateral dimensions, microdomain regions, and defect sites of MoS₂ catalysts. The relationship between catalyst structure and hydrogenation effect also lags far behind the application of MoS₂ in the precipitation of hydrogen, etc. Oil-soluble and water-soluble MoS₂ catalysts eventually need to be converted to a solid sulfide state to have hydrogenation activity. The conversion history of soluble catalysts to solid-type catalysts and the key to their improved catalytic effectiveness remain unclear.

Alleviation of Herbicide Toxicity in Solanum lycopersicum L.-An Antioxidant Stimulation Approach

Application of the herbicide glyphosate in crops is a common practice among farmers around the world. Tomato is one of the crops that are treated with glyphosate to fight weed growth and loss of crop. However, tomato plants often show phytotoxic effects from glyphosate. In this study, the ability of pongamia oil derived from Pongamia pinnata (known also as Millettia pinnata) tree to alleviate the herbicide glyphosate toxicity effects in tomato (S.lycopersicum L. cv. Micro-tom) plants was tested. Tomato plants were treated with a mixture of a dose of (GLY) glyphosate (10 mg kg−1) and different doses of pongamia oil (PO) foliar spray (5, 10, 50, and 100 mM) and compared with the herbicide or oil control (glyphosate 10 mg kg−1 or pongamia oil PO 50 mM). Some morphological features, non-enzymatic and enzymatic antioxidants, and gene expression were observed. Glyphosate-treated plants sprayed with PO 50 mM (GLY + PO 50) showed increased root biomass (0.28 g-p ≤ 0.001), shoot biomass (1.2 g-p ≤ 0.01), H2O2 (68 nmol/g), and the activities of superoxide dismutase (SOD; 40 mg-p ≤ 0.001), catalase (CAT; 81.21 mg-p ≤ 0.05), ascorbate peroxidase (APX; 80 mg-p ≤ 0.01) and glutathione reductase (GR; 53 min/mg-F4,20 = 15.88, p ≤ 0.05). In contrast, these plants showed reduced contents of Malondialdehyde (MDA; 30 nmol/g-F4,20 = 18.55, p ≤ 0.01), O2 (0.6 Abs/g), Prolne (Pro; 345 µg/g), Glutathine (GSH; 341 nmol/mg-p ≤ 0.001), ascorbate (AsA; 1.8 µmol/gm), ascorbic acid (AA; 1.62 mg-p ≤ 0.05) and dehydroascorbate (DHAR; 0.32 mg p ≤ 0.05). The gene expression analysis was conducted for seven oxidative stress related genes besides the house-keeping gene Actin as a reference. The gene CYP1A1450 showed the highest mRNA expression level (6.8 fold ± 0.4) in GLY-treated tomato plants, whereas GLY-treated plants + PO 50 showed 2.9 fold. The study concluded that foliar spray of 50 mM pongamia oil alleviated the toxic effects of glyphosate on tomato plants in the form of increased root and shoot biomass, SOD, CAT, APX, and GR activity, while reduced MDA, O2, Pro, GSH, AsA, AA, DHAR, and gene CYP1A1450 expression.

Effect of Co-Doping on Cu/CaO Catalysts for Selective Furfural Hydrogenation into Furfuryl Alcohol

Cu/CaO catalysts with fine-tuned Co-doping for excellent catalytic performance of furfural (FAL) hydrogenation to furfuryl alcohol (FOL) were synthesized by a facile wetness impregnation method. The optimal Co_1.40Cu₁/CaO catalyst, with a Co to Cu mole ratio of 1.40:1, exhibited a 100% FAL conversion with a FOL yield of 98.9% at 100 °C and 20 bar H₂ pressure after 4 h. As gained from catalyst characterizations, Co addition could facilitate the reducibility of the CoCu system. Metallic Cu, Co-Cu alloys, and oxide species with CaO, acting as the major active components for the reaction, were formed after reduction at 500 °C. Additionally, this combination of Co and Cu elements could result in an improvement of catalyst textures when compared with the bare CaO. Smaller catalyst particles were formed after the addition of Co into Cu species. It was found that the addition of Co to Cu on the CaO support could fine-tune the appropriate acidic and basic sites to boost the FOL yield and selectivity with suppression of undesired products. These observations could confirm that the high efficiency and selectivity are mainly attributed to the synergistic effect between the catalytically active Co-Cu species and the CaO basic sites. Additionally, the FAL conversion and FOL yield insignificantly changed throughout the third consecutive run, confirming a high stability of the developed Co_1.40Cu₁/CaO catalyst.