Products Released from Structurally Different Dextrans by Bacterial and Fungal Dextranases

Screening of 14 Lactic Acid Bacteria for Fermentative Isomalto/Malto-Polysaccharide Synthesis

Some lactic acid bacteria such as Limosilactobacillus reuteri or Fructilactobacillus sanfranciscensis contain genes encoding 4,6-α-glucanotransferases. These enzymes convert starch and maltodextrins into isomalto/malto-polysaccharides (IMMPs). Many studies focused on the properties of recombinant glucanotransferases, but limited knowledge is available on fermentative synthesis. However, this aspect would be important for the in situ IMMP formation in fermented foods such as sourdough. Therefore, the aim of this study was to investigate the IMMP synthesis of 14 different lactic acid bacteria. We demonstrated that 11 of the investigated strains formed IMMPs with varying structural compositions from different maltodextrins. The portions of α-1,6-linkages depended on the bacterial strain and composition of the maltodextrin. By using different analytical approaches, it was demonstrated that linear chains of α-1,6-linked glucopyranoses with varying lengths were formed. Thus, the 11 IMMP-producing strains have high potential for an in situ synthesis of IMMPs in fermented foods such as sourdough.

High-yield production of completely linear dextrans and isomalto-oligosaccharides by a truncated dextransucrase from Ligilactobacillus animalis TMW 1.971

Several lactic acid bacteria are capable of producing water-soluble exopolysaccharides such as dextran from sucrose by using glucansucrases. Several recombinant glucansucrases were described, however, yields were often limited and most dextrans were branched at position O3. In this study, the dextransucrase from Ligilactobacillus animalis TMW 1.971 was recombinantly produced without its N-terminal variable region and used for dextran synthesis. The enzyme expressed well and showed very high total as well as transferase activities compared to other glucansucrases. It was able to transfer nearly all glucose from sucrose to oligo- and polymeric products under certain conditions (about 95 % of glucose transferred). The high efficiency of the enzyme made it possible to obtain absolute dextran yields of up to 214.9 g/L from a 1.5 M sucrose solution. Structural characterization of the products showed that the dextrans produced have a rather low molecular weight, a narrow size distribution, and are completely linear. Furthermore, we showed that various low molecular weight dextrans or 1,6-linked isomalto-oligosaccharides can be efficiently produced by acid hydrolysis. Overall, we demonstrated that Ligilactobacillus animalis TMW 1.971 dextransucrase can be used to efficiently synthesize dextrans with a quite unique structural composition. The dextrans produced have a high potential for further applications such as synthesis of copolymers or size standards with a very defined molecular structure.

Detailed structural characterization of five water-insoluble α-glucans produced by glucansucrases from Streptococcus spp

Water-insoluble α-glucans synthesized from sucrose by glucansucrases from Streptococcus spp. are essential in dental plaque and caries formation. Because limited information is available on the fine structure of these biopolymers, we analyzed the structures of unmodified glucans produced by five recombinant Streptococcus (S.) mutans DSM 20523 and S. salivarius DSM 20560 glucansucrases in detail. A combination of methylation analysis, endo-dextranase and endo-mutanase hydrolyses, and HPSEC-RI was used. Furthermore, crystal-like regions were analyzed by using XRD and 13C MAS NMR spectroscopy. Our results showed that the glucan structures were highly diverse: Two glucans with 1,3- and 1,6-linkages were characterized in detail besides an almost exclusively 1,3-linked and a linear 1,6-linked glucan. Furthermore, one glucan contained 1,3-, 1,4-, and 1,6-linkages and thus had an unusual, not yet described structure. It was demonstrated that the glucans had a varying structural architecture by using partial enzymatic hydrolyses. Furthermore, crystal-like regions formed by 1,3-glucopyranose units were observed for the two 1,3- and 1,6-linked glucans and the linear 1,3-linked glucan. 1,6-linked regions were mobile and not involved in the crystal-like areas. Altogether, our results broaden the knowledge of the structure of water-insoluble α-glucans from Streptococcus spp.

Microbial dextran-hydrolyzing enzyme: Properties, structural features, and versatile applications

Dextran, an α-glucan mainly composed of (α1 → 6) linkages, has been widely applied in the food, cosmetic, and medicine industries. Dextranase can hydrolyze dextran to synthesize oligodextrans, which show prominent properties and promising applications in the food industry. Dextranases are widely distributed in bacteria, yeasts, and fungus, and classified into glycoside hydrolase (GH) 13, 15, 31, 49, and 66 families according to their sequence similarity, structural features, and reaction types. Dextranase, as a dextran-hydrolyzing enzyme, displays great application potential in the sugar-making, oral health care, medicine, and biotechnology industries. Here we mainly focused on presenting the enzymatic properties, structural features, and versatile (potential) applications of dextranase. To date, seven crystal structures of dextranases from GH 13, 15, 31, 49, and 66 families have been successfully solved. However, their molecular mechanisms for hydrolyzing dextran, especially on the size determinants of the hydrolysates, remain largely unknown. Additionally, the classification, microbial distribution, and immobilization technology of dextranase were also discussed in detail. This review discussed dextranase from different aspects with the ambition to present how they constitute the groundwork for promising future developments.

Preparation of Sweet Potato Porous Starch by Marine Dextranase and Its Adsorption Characteristics

Dextranase (EC 3.2.1.11) is primarily applied in food, sugar, and pharmaceutical industries. This study focuses on using a cold shock Escherichia coli expression system to express marine dextranase SP5-Badex; enzyme activity increased about 2.2-fold compared to previous expression. This enzyme was employed to produce sweet potato porous starch, with special emphasis on the pore size of the starch. The water and oil adsorption rates of the porous starch increased by 1.43 and 1.51 times, respectively. Extensive Fourier transform infrared spectroscopy and X-ray diffraction revealed that the crystal structure of the sweet potato starch was unaltered by enzymatic hydrolysis. The adsorption capacities of the porous starch for curcumin and proanthocyanidins were 9.59 and 12.29 mg/g, respectively. Notably, the stability of proanthocyanidins was significantly enhanced through their encapsulation in porous starch. After 2.5 h of ultraviolet irradiation, the free radical scavenging rate of the encapsulated proanthocyanidins remained at 95.10%. Additionally, after 30 days of sunlight exposure, the free radical scavenging rate of the encapsulated proanthocyanidins (84.42%) was significantly higher than that (24.34%) observed in the control group. These research findings provide substantial experimental evidence for preparing sweet potato porous starch using marine dextranase.

The Screening and Identification of a Dextranase-Secreting Marine Actinmycete Saccharomonospora sp. K1 and Study of Its Enzymatic Characteristics

In this study, an actinomycete was isolated from sea mud. The strain K1 was identified as Saccharomonospora sp. by 16S rDNA. The optimal enzyme production temperature, initial pH, time, and concentration of the inducer of this actinomycete strain K1 were 37 °C, pH 8.5, 72 h, and 2% dextran T20 of medium, respectively. Dextranase from strain K1 exhibited maximum activity at 8.5 pH and 50 °C. The molecular weight of the enzyme was <10 kDa. The metal ions Sr2+ and K+ enhanced its activity, whereas Fe3+ and Co2+ had an opposite effect. In addition, high-performance liquid chromatography showed that dextran was mainly hydrolyzed to isomaltoheptose and isomaltopentaose. Also, it could effectively remove biofilms of Streptococcus mutans. Furthermore, it could be used to prepare porous sweet potato starch. This is the first time a dextranase-producing actinomycete strain was screened from marine samples.

Comprehensive structural characterization of water-soluble and water-insoluble homoexopolysaccharides from seven lactic acid bacteria

Several lactic acid bacteria are able to produce water-soluble and water-insoluble homoexopolysaccharides (HoEPS) from sucrose. In this study, structures of all HoEPS which were fermentatively produced by Leuconostoc mesenteroides subsp. dextranicum NRRL B-1121 and B-1144, Leuconostoc mesenteroides subsp. mesenteroides NRRL B-1149, B-1438 and B-1118, Leuconostoc suionicum DSM 20241, and Liquorilactobacillus satsumensis DSM 16230 were systematically analyzed. Monosaccharide analysis, methylation analysis, NMR spectroscopy, size-exclusion chromatography, and different enzymatic fingerprinting methods were used to obtain detailed structural information. All strains produced water-soluble dextrans and/or levans as well as water-insoluble glucans. Levans showed different degrees of branching and high molecular weights, whereas dextrans had comparable structures and broader size distributions. Fine structures of water-soluble HoEPS were analyzed after endo-dextranase and endo-levanase hydrolysis. Water-insoluble glucans were composed of different portions of 1,3-linkages (5 to 40 %). Hydrolysis with endo-dextranase and endo-mutanase yielded further information on block sizes and varying fine structures. Overall, clear differences between HoEPS yields and structures were observed.

Influence of ultrasonication and hydrolysis conditions in methylation analysis of bacterial homoexopolysaccharides

Homoexopolysaccharides (HoEPS) such as α-glucans and β-fructans are synthesized by lactic and acetic acid bacteria. Methylation analysis is an important and well-established tool for the structural analysis of these polysaccharides, however, multiple steps are required for polysaccharide derivatization. Because ultrasonication during methylation and the conditions during acid hydrolysis may influence the results, we investigated their role in the analysis of selected bacterial HoEPS. The results reveal that ultrasonication is crucial for water insoluble α-glucan to swell/disperse and deprotonate prior to methylation whereas it is not necessary for water soluble HoEPS (dextran and levan). Complete hydrolysis of permethylated α-glucans requires 2 M trifluoroacetic acid (TFA) for 60/90 min at 121 °C while levan is hydrolyzed in 1 M TFA for 30 min at 70 °C. Nevertheless, levan was also detectable after hydrolysis in 2 M TFA at 121 °C. Thus, these conditions can be used to analyze a levan/dextran mixture. However, size exclusion chromatography of permethylated and hydrolyzed levan showed degradation and condensation reactions at harsher hydrolysis conditions. Application of reductive hydrolysis with 4-methylmorpholine-borane and TFA did not lead to improved results. Overall, our results demonstrate that conditions used for methylation analysis have to be adjusted for the analysis of different bacterial HoEPS.

Purification and characterization of cold-adapted and salt-tolerant dextranase from Cellulosimicrobium sp. THN1 and its potential application for treatment of dental plaque

The cold-adapted and/or salt-tolerant enzymes from marine microorganisms were confirmed to be meritorious tools to enhance the efficiency of biocatalysis in industrial biotechnology. We purified and characterized a dextranase CeDex from the marine bacterium Cellulosimicrobium sp. THN1. CeDex acted in alkaline pHs (7.5-8.5) and a broad temperature range (10-50°C) with sufficient pH stability and thermostability. Remarkably, CeDex retained approximately 40% of its maximal activities at 4°C and increased its activity to 150% in 4 M NaCl, displaying prominently cold adaptation and salt tolerance. Moreover, CeDex was greatly stimulated by Mg2+, Na+, Ba2+, Ca2+ and Sr2+, and sugarcane juice always contains K+, Ca2+, Mg2+ and Na+, so CeDex will be suitable for removing dextran in the sugar industry. The main hydrolysate of CeDex was isomaltotriose, accompanied by isomaltotetraose, long-chain IOMs, and a small amount of isomaltose. The amino acid sequence of CeDex was identified from the THN1 genomic sequence by Nano LC-MS/MS and classified into the GH49 family. Notably, CeDex could prevent the formation of Streptococcus mutans biofilm and disassemble existing biofilms at 10 U/ml concentration and would have great potential to defeat biofilm-related dental caries.

Marine Bacterial Dextranases: Fundamentals and Applications

Dextran, a renewable hydrophilic polysaccharide, is nontoxic, highly stable but intrinsically biodegradable. The α-1, 6 glycosidic bonds in dextran are attacked by dextranase (E.C. 3.2.1.11) which is an inducible enzyme. Dextranase finds many applications such as, in sugar industry, in the production of human plasma substitutes, and for the treatment and prevention of dental plaque. Currently, dextranases are obtained from terrestrial fungi which have longer duration for production but not very tolerant to environmental conditions and have safety concerns. Marine bacteria have been proposed as an alternative source of these enzymes and can provide prospects to overcome these issues. Indeed, marine bacterial dextranases are reportedly more effective and suitable for dental caries prevention and treatment. Here, we focused on properties of dextran, properties of dextran—hydrolyzing enzymes, particularly from marine sources and the biochemical features of these enzymes. Lastly the potential use of these marine bacterial dextranase to remove dental plaque has been discussed. The review covers dextranase-producing bacteria isolated from shrimp, fish, algae, sea slit, and sea water, as well as from macro- and micro fungi and other microorganisms. It is common knowledge that dextranase is used in the sugar industry; produced as a result of hydrolysis by dextranase and have prebiotic properties which influence the consistency and texture of food products. In medicine, dextranases are used to make blood substitutes. In addition, dextranase is used to produce low molecular weight dextran and cytotoxic dextran. Furthermore, dextranase is used to enhance antibiotic activity in endocarditis. It has been established that dextranase from marine bacteria is the most preferable for removing plaque, as it has a high enzymatic activity. This study lays the groundwork for the future design and development of different oral care products, based on enzymes derived from marine bacteria.

Purification, Characterization, and Hydrolysate Analysis of Dextranase From Arthrobacter oxydans G6-4B

Dextran has aroused increasingly more attention as the primary pollutant in sucrose production and storage. Although enzymatic hydrolysis is more efficient and environmentally friendly than physical methods, the utilization of dextranase in the sugar industry is restricted by the mismatch of reaction conditions and heterogeneity of hydrolysis products. In this research, a dextranase from Arthrobacter oxydans G6-4B was purified and characterized. Through anion exchange chromatography, dextranase was successfully purified up to 32.25-fold with a specific activity of 288.62 U/mg protein and a Mw of 71.12 kDa. The optimum reaction conditions were 55°C and pH 7.5, and it remained relatively stable in the range of pH 7.0-9.0 and below 60°C, while significantly inhibited by metal ions, such as Ni+, Cu2+, Zn2+, Fe3+, and Co2+. Noteworthily, a distinction of previous studies was that the hydrolysates of dextran were basically isomalto-triose (more than 73%) without glucose, and the type of hydrolysates tended to be relatively stable in 30 min; dextranase activity showed a great influence on hydrolysate. In conclusion, given the superior thermal stability and simplicity of hydrolysates, the dextranase in this study presented great potential in the sugar industry to remove dextran and obtain isomalto-triose.

Removal of bacterial dextran in sugarcane juice by Talaromyces minioluteus dextranase expressed constitutively in Pichia pastoris

A gene construct encoding the mature region of Talaromyces minioluteus dextranase (EC 3.2.1.11) fused to the Saccharomyces cerevisiae SUC2 signal sequence was expressed in Pichia pastoris under the constitutive glyceraldehyde 3-phosphate dehydrogenase promoter (pGAP). The increase of the transgene dosage from one to two and four copies enhanced proportionally the extracellular yield of the recombinant enzyme (r-TmDEX) without inhibiting cell growth. The volumetric productivity of the four-copy clone in fed batch fermentation (51 h) using molasses as carbon source was 1706 U/L/h. The secreted N-glycosylated r-TmDEX was optimally active at pH 4.5-5.5 and temperature 50-60 °C. The addition of sucrose (600 g/L) as a stabilizer retained intact the r-TmDEX activity after 1-h incubation at 50-60 °C and pH 5.5. Bacterial dextran in deteriorated sugarcane juice was completely removed by applying a crude preparation of secreted r-TmDEX. The high yield of r-TmDEX in methanol-free cultures and the low cost of the fed batch fermentation make the P. pastoris pGAP-based expression system appropriate for the large scale production of dextranase and its use for dextran removal at sugar mills.